Upgrading Bridge Rails on Low-Volume Roads in Iowa, TR-679, 2016

Building on previous research, the goal of this project was to identify significant influencing factors for the Iowa Department of Transportation (DOT) to consider in future updates of its Instructional Memorandum (I.M.) 3.213, which provides guidelines for determining the need for traffic barriers (guardrail and bridge rail) at secondary roadway bridges—specifically, factors that might be significant for the bridge rail rating system component of I.M. 3.213. A literature review was conducted of policies and guidelines in other states and, specifically, of studies related to traffic barrier safety countermeasures at bridges in several states. In addition, a safety impact study was conducted to evaluate possible non-driver-related behavior characteristics of crashes on secondary road structures in Iowa using road data, structure data, and crash data from 2004 to 2013. Statistical models (negative binomial regression) were used to determine which factors were significant in terms of crash volume and crash severity. The study found that crashes are somewhat more frequent on or at bridges possessing certain characteristics—traffic volume greater than 400 vehicles per day (vpd) (paved) or greater than 50 vpd (unpaved), bridge length greater than 150 ft (paved) or greater than 35 ft (unpaved), bridge width narrower than its approach (paved) or narrower than 20 ft (unpaved), and bridges older than 25 years (both paved and unpaved). No specific roadway or bridge characteristic was found to contribute to more serious crashes. The study also confirmed previous research findings that crashes with bridges on secondary roads are rare, low-severity events. Although the findings of the study support the need for appropriate use of bridge rails, it concludes that prescriptive guidelines for bridge rail use on secondary roads may not be necessary, given the limited crash expectancy and lack of differences in crash expectancy among the various combinations of explanatory characteristics.

Growth and yield of red raspberries cultivated under open field condition vs. high tunnel or rain shelter in the northern canadian climate

La culture sous abris avec des infrastructures de type grands tunnels est une nouvelle technologie permettant d’améliorer la production de framboises rouges sous des climats nordiques. L’objectif principal de ce projet de doctorat était d’étudier les performances de ces technologies (grands tunnels vs. abris parapluie de type Voen, en comparaison à la culture en plein champ) et leur effets sur le microclimat, la photosynthèse, la croissance des plantes et le rendement en fruits pour les deux types de framboisiers non-remontants et remontants (Rubus idaeus, L.). Puisque les pratiques culturales doivent être adaptées aux différents environnements de culture, la taille d’été (pour le cultivar non-remontant), l’optimisation de la densité des tiges (pour le cultivar remontant) et l’utilisation de bâches réfléchissantes (pour les deux types des framboisiers) ont été étudiées sous grands tunnels, abris Voen vs. en plein champ. Les plants cultivés sous grands tunnels produisent en moyenne 1,2 et 1,5 fois le rendement en fruits commercialisables que ceux cultivés sous abri Voen pour le cv. non-remontant ‘Jeanne d’Orléans’ et le cv. remontant ‘Polka’, respectivement. Comparativement aux framboisiers cultivés aux champs, le rendement en fruits des plants sous grands tunnels était plus du double pour le cv. ‘Jeanne d’Orléans’ et près du triple pour le cv. ‘Polka’. L’utilisation de bâches réfléchissantes a entrainé un gain significatif sur le rendement en fruits de 12% pour le cv. ‘Jeanne d’Orléans’ et de 17% pour le cv. ‘Polka’. La taille des premières ou deuxièmes pousses a significativement amélioré le rendement en fruits du cv. ‘Jeanne d’Orléans’ de 26% en moyenne par rapport aux framboisiers non taillés. Des augmentations significatives du rendement en fruits de 43% et 71% du cv. ‘Polka’ ont été mesurées avec l’accroissement de la densité à 4 et 6 tiges par pot respectivement, comparativement à deux tiges par pot. Au cours de la période de fructification du cv. ‘Jeanne d’Orléans’, les bâches réfléchissantes ont augmenté significativement la densité de flux photonique photosynthétique (DFPP) réfléchie à la canopée inférieure de 80% en plein champ et de 60% sous grands tunnels, comparativement à seulement 14% sous abri Voen. Durant la saison de fructification du cv. ‘Polka’, un effet positif de bâches sur la lumière réfléchie (jusqu’à 42%) a été mesuré seulement en plein champ. Dans tous les cas, les bâches réfléchissantes n’ont présenté aucun effet significatif sur la DFPP incidente foliaire totale et la photosynthèse. Pour le cv. ‘Jeanne d’Orléans’, la DFPP incidente sur la feuille a été atténuée d’environ 46% sous le deux types de revêtement par rapport au plein champ. Par conséquent, la photosynthèse a été réduite en moyenne de 43% sous grands tunnels et de 17% sous abris Voen. Des effets similaires ont été mesurés pour la DFPP incidente et la photosynthèse avec le cv. Polka. En dépit du taux de photosynthèse des feuilles individuelles systématiquement inférieur à ceux mesurés pour les plants cultivés aux champs, la photosynthèse de la plante entière sous grands tunnels était de 51% supérieure à celle observée au champ pour le cv. ‘Jeanne d’Orléans’, et 46% plus élevée pour le cv. ‘Polka’. Ces résultats s’expliquent par une plus grande (près du double) surface foliaire pour les plants cultivés sous tunnels, qui a compensé pour le plus faible taux de photosynthèse par unité de surface foliaire. Les températures supra-optimales des feuilles mesurées sous grands tunnels (6.6°C plus élevé en moyenne que dans le champ), ainsi que l’atténuation de la DFPP incidente (env. 43%) par les revêtements de tunnels ont contribué à réduire le taux de photosynthèse par unité de surface foliaire. La photosynthèse de la canopée entière était étroitement corrélée avec le rendement en fruits pour les deux types de framboisiers rouges cultivés sous grands tunnels ou en plein champ.

Post-shock thermochemistry in hypervelocity CO2 and air flow

This work represents ongoing efforts to study high-enthalpy carbon dioxide flows in anticipation of the upcoming Mars Science Laboratory (MSL) and future missions to the red planet. The work is motivated by observed anomalies between experimental and numerical studies in hypervelocity impulse facilities for high enthalpy carbon dioxide flows. In this work, experiments are conducted in the Hypervelocity Expansion Tube (HET) which, by virtue of its flow acceleration process, exhibits minimal freestream dissociation in comparison to reflected shock tunnels. This simplifies the comparison with computational result as freestream dissociation and considerable thermochemical excitation can be neglected. Shock shapes of the MSL aeroshell and spherical geometries are compared with numerical simulations incorporating detailed CO2 thermochemical modeling. The shock stand-off distance has been identified in the past as sensitive to the thermochemical state and as such, is used here as an experimental measurable for comparison with CFD and two different theoretical models. It is seen that models based upon binary scaling assumptions are not applicable for the low-density, small-scale conditions of the current work. Mars Science Laboratory shock shapes at zero angle of attack are also in good agreement with available data from the LENS X expansion tunnel facility, confi rming results are facility-independent for the same type of flow acceleration, and indicating that the flow velocity is a suitable first-order matching parameter for comparative testing. In an e ffort to address surface chemistry issues arising from high-enthalpy carbon dioxide ground-test based experiments, spherical stagnation point and aeroshell heat transfer distributions are also compared with simulation. Very good agreement between experiment and CFD is seen for all shock shapes and heat transfer distributions fall within the non-catalytic and super-catalytic solutions. We also examine spatial temperature profiles in the non-equilibrium relaxation region behind a stationary shock wave in a hypervelocity air Mach 7.42 freestream. The normal shock wave is established through a Mach reflection from an opposing wedge arrangement. Schlieren images confirm that the shock con guration is steady and the location is repeatable. Emission spectroscopy is used to identify dissociated species and to make vibrational temperature measurements using both the nitric oxide and the hydroxyl radical A-X band sequences. Temperature measurements are presented at selected locations behind the normal shock. LIFBASE is used as the simulation spectrum software for OH temperature-fitting, however the need to access higher vibrational and rotational levels for NO leads to the use of an in-house developed algorithm. For NO, results demonstrate the contribution of higher vibrational and rotational levels to the spectra at the conditions of this study. Very good agreement is achieved between the experimentally measured NO vibrational temperatures and calculations performed using an existing state-resolved, three-dimensional forced harmonic oscillator thermochemical model. The measured NO A-X vibrational temperatures are significantly higher than the OH A-X temperatures.

Protected cropping of strawberry plants in subtropical Queensland

The effect of protected cropping on the performance of two strawberry cultivars ('Festival' and 'Rubygem') and two breeding lines (Breeding Lines 1 and 2) was studied in subtropical Queensland, Australia over two years. Production in this area is affected by rain, with direct damage to the fruit and the development of fruit diseases before harvest. The main objective of the study was to determine whether plants grown under high plastic tunnels had less rain damage, less disease incidence, and higher yields than plants grown outdoors. Our studies show that marketable yields were up to 40% higher in the plants under the tunnels compared with yields of the plants outdoors. This was mainly because fruit from the plants grown under the tunnels had lower incidences of rain damage and/or grey mould. There were no consistent differences in the relative numbers of small and/or misshaped fruit in the two growing environments. This research highlights the potential of protected cropping for strawberry producers in subtropical areas that receive significant rainfall during the growing season.

D3M: multicast listener mobility support mechanisms over distributed mobility anchoring architectures

The explosion in mobile data traffic is a driver for future network operator technologies, given its large potential to affect both network performance and generated revenue. The concept of distributed mobility management (DMM) has emerged in order to overcome efficiency-wise limitations in centralized mobility approaches, proposing not only the distribution of anchoring functions but also dynamic mobility activation sensitive to the applications needs. Nevertheless, there is not an acceptable solution for IP multicast in DMM environments, as the first proposals based on MLD Proxy are prone to tunnel replication problem or service disruption. We propose the application of PIM-SM in mobility entities as an alternative solution for multicast support in DMM, and introduce an architecture enabling mobile multicast listeners support over distributed anchoring frameworks in a network-efficient way. The architecture aims at providing operators with flexible options to provide multicast mobility, supporting three modes: the first one introduces basic IP multicast support in DMM; the second improves subscription time through extensions to the mobility protocol, obliterating the dependence on MLD protocol; and the third enables fast listener mobility by avoiding potentially slow multicast tree convergence latency in larger infrastructures, by benefiting from mobility tunnels. The different modes were evaluated by mathematical analysis regarding disruption time and packet loss during handoff against several parameters, total and tunneling packet delivery cost, and regarding packet and signaling overhead.

Instrumentation studies for plasma jet and hypersonic wind tunnel,

"This research was supported by the McDonnell Aircraft Corporation under Contract no. 6140-20 P.O. 7S4899-R."

A variable atmosphere hypersonic wind tunnel for similitude studies

Mode of access: Internet.

Técnicas construtivas de túneis de travessia

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2016.

Icnofósseis (paleotocas e crotovinas) atribuídos a mamíferos extintos no sudeste e sul do Brasil

ICHNOFOSSILS (PALEO-BURROWS and CROTOVINES) ATTRIBUTED TO EXTINCT MAMMALS IN SOUTHEASTERN and SOUTH BRAZIL. This work presents information regarding tunnels which are attributed to large extinct mammals. These structures can be found in several places in southeastern and southern Brazil, in different types of substrate, occurring as hollow structures (paleo-burrows) or those filled with sediments (crotovines). The dimensions and osteoderm and claw imprints found along the internal walls of the paleo-burrow found on aluvial fan deposits near the town of Cristal (Rio Grande do Sul State) suggest that a dasypodid xenarthran might have dug this structure. Comparison with similar structures found in Argentina can provide more detailed information regarding the paleoecology and biostratigraphy of the organisms that made these burrows.

Construindo novos túneis : subterfúgios das engenheiras para deslocar as fronteiras da divisão sexual da ciência e da tecnologia

O domínio do conhecimento científico é historicamente masculino. Mesmo com a crescente inserção das mulheres nesse campo, pode-se dizer que a lógica de fazer ciência ainda está pautada em valores masculinizados. Nosso trabalho pretende mapear a percepção das engenheiras sobre suas escolhas pelas ciências exatas e por um campo profissional tradicionalmente masculino, a engenharia. A nossa hipótese de trabalho inicial afirmava que as escolhas das engenheiras durante sua trajetória acadêmica e profissional são dificultadas pela forte tendência à perpetuação da divisão sexual da educação superior, da ciência e do trabalho. O objetivo principal da pesquisa foi desvendar os argumentos que levam à naturalização da separação entre cursos de homens e cursos de mulheres, áreas de trabalho femininas e masculinas ainda que dentro da mesma área do saber ou do campo profissional. Para tanto, foi realizado estudo qualitativo com entrevistas semiestruturadas à sete engenheiras de diferentes áreas de uma empresa estatal, sociedade anônima de economia mista, com sede no Distrito Federal, atuante no serviço público de energia elétrica. Observou-se a perpetuação da divisão sexual horizontal e vertical da ciência, tecnologia e do trabalho, que se reinventa nas trajetórias traçadas pelas engenheiras, formando guetos “permitidos” às mulheres, ainda que dentro da própria engenharia. _________________________________________________________________________________________________ ABSTRACT

An overview of the submerged sea caves of Sagres (South of Portugal-Algarve)

The submerged sea caves of Sagres are located within the “Parque Natural do Sudoeste Alentejano e Costa Vicentina (PNSACV)” Marine Protected Area (MPA). This MPA integrates the national network of protected areas, addressed by the National Institute for Nature Conservation and Forest (ICNF) and was declared Site of Community Importance (SCI) under the Habitats Directive. Under the Annex I from the Habitat Directive these habitat caves are included in “8330 Submerged or partially submerged sea caves”. This conservation status should provide sufficient concern to have detailed information on biodiversity. However, among marine researcher, little is still known about these submerged sea caves and tunnels habitats. The only well-known study dealing with the Sagres sea caves was conducted in the late 80s and was only published in 2001. For effective management of such specific habitats a clear understanding of their localization and extension, the assessment of the biological communities, its conservation importance, its monitoring options and their sensitivity to natural change and human disturbance need to be a relatively clear. This report, produced under the MeshAtlantic Project, provides an overview of the available published and unpublished information relevant for the conservation management of the subtidal caves of Sagres. It mainly aims to be a base contribution for future studies.

The Amplifier - v. 14, no. 6

In this issue...Truss contest, Ski Club, dial Soap, January Feature Girl, Columbia Riding Club, Night Courses, Basketball, WICHE, New York Times, Tech Tunnels

A practical MEMS gravimeter

The ability to measure tiny variations in the local gravitational acceleration allows – amongst other applications – the detection of hidden hydrocarbon reserves, magma build-up before volcanic eruptions, and subterranean tunnels. Several technologies are available that achieve the sensitivities required (tens of μGal/√Hz), and stabilities required (periods of days to weeks) for such applications: free-fall gravimeters, spring-based gravimeters, superconducting gravimeters, and atom interferometers. All of these devices can observe the Earth tides; the elastic deformation of the Earth’s crust as a result of tidal forces. This is a universally predictable gravitational signal that requires both high sensitivity and high stability over timescales of several days to measure. All present gravimeters, however, have limitations of excessive cost (£70 k) and high mass (<8 kg). In this thesis, the building of a microelectromechanical system (MEMS) gravimeter with a sensitivity of 40 μGal/√Hz in a package size of only a few cubic centimetres is discussed. MEMS accelerometers – found in most smart phones – can be mass-produced remarkably cheaply, but most are not sensitive enough, and none have been stable enough to be called a ‘gravimeter’. The remarkable stability and sensitivity of the device is demonstrated with a measurement of the Earth tides. Such a measurement has never been undertaken with a MEMS device, and proves the long term stability of the instrument compared to any other MEMS device, making it the first MEMS accelerometer that can be classed as a gravimeter. This heralds a transformative step in MEMS accelerometer technology. Due to their small size and low cost, MEMS gravimeters could create a new paradigm in gravity mapping: exploration surveys could be carried out with drones instead of low-flying aircraft; they could be used for distributed land surveys in exploration settings, for the monitoring of volcanoes; or built into multi-pixel density contrast imaging arrays.