Caracterização Hematológica e Imunofenotípica em Pacientes com Leucemia Linfoblástica Aguda

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Desenvolvimento de tubulação em compósito polimérico revestida externamente com poliuretano de alta densidade

Pipelines for the transport of crude oil from the production wells to the collecting stations are named production lines . These pipes are subjected to chemical and electrochemical corrosion according to the environment and the type of petroleum transported. Some of these lines, depending upon the composition of the fluid produced, may leak within less than one year of operation due to internal corrosion. This work aims at the development of composite pipes with an external protecting layer of high density polyurethane for use in production lines of onshore oil wells, meeting operational requirements. The pipes were manufactured using glass fibers, epoxy resin, polyester resin, quartz sand and high density polyurethane. The pipes were produced by filament winding with the deposition of high density polyurethane on the external surface and threaded ends (API 15 HR/PM-VII). Three types of pipes were manufactured: glass/epoxy, glass/epoxy with an external polyurethane layer and glass/epoxy with an intermediate layer of glass fiber, polyester, sand and with an external polyurethane layer. The three samples were characterized by Scanning Electronic Microscopy (SEM) and for the determination of constituent content. In addition, the following tests were conducted: hydrostatic test, instant rupture, shorttime failure pressure, Gardner impact, transverse stiffness and axial tension. Field tests were conducted in Mossoró RN (BRAZIL), where 1,677 meters of piping were used. The tests results of the three types of pipes were compared in two events: after two months from manufacturing of the samples and after nine months of field application. The results indicate that the glass/epoxy pipes with an intermediate layer of fiber glass composite, polyester e sand and with an external layer of high density polyurethane showed superior properties as compared to the other two and met the requirements of pressure class, axial tensile strength, transverse stiffness, impact and environmental conditions, for onshore applications as production lines

Membrana de alumina anódica: comportamento da microestrutura e estudo das propriedades ópticas após tratamento térmico

Thin commercial aluminum electrolytic and passed through reactions was obtained with anodic alumina membranes nanopores. These materials have applications in areas recognized electronic, biomedical, chemical and biological weapons, especially in obtaining nanostructures using these membranes as a substrate or template for processing nanowires, nanodots and nanofibers for applications noble. Previous studies showed that the membranes that have undergone heat treatment temperature to 1300° C underwent changes in morphology, crystal structure and optical properties. This aim, this thesis, a study of the heat treatment of porous anodic alumina membranes, in order to obtain and to characterize the behavior changes structures during the crystallization process of the membranes, at temperatures ranging between 300 and 1700° C. It was therefore necessary to mount a system formed by a tubular furnace resistive alumina tube and controlled environment, applying flux with special blend of Ag-87% and 13% N2, in which argon had the role of carrying out the oxygen nitrogen system and induce the closing of the pores during the densification of the membrane. The duration of heat treatment ranged from 60 to 15 minutes, at temperatures from 300 to 1700° C respectively. With the heat treatment occurred: a drastic reduction of porosity, grain growth and increased translucency of the membrane. For the characterization of the membranes were analyzed properties: Physical - thermogravimetric, X-ray diffraction, BET surface area; morphological - SEM, EDS through compositional and, optical absorbance, and transmittance in the UV-VIS, and FTIR. The results using the SEM showed that crystallization has occurred, densification and significant changes in membrane structure, as well as obtaining microtube, the BET analysis showed a decrease in specific surface area of the membranes has to 44.381 m2.g-1 to less than 1.8 m2.g-1 and in the analysis of transmittance and absorbance was found a value of 16.5% in the range of 800 nm, characteristic of the near infrared and FTIR have confirmed the molecular groups of the material. Thus, one can say that the membranes were mixed characteristics and properties which qualify for use in gas filtration system, as well as applications in the range of optical wavelength of the infra-red, and as a substrate of nanomaterials. This requires the continuation and deepening of additional study

Desenvolvimento de sistemas de aditivos químicos para aplicação em cimentações de poços de petróleo

The primary cementing is an important step in the oilwell drilling process, ensuring the mechanical stability of the well and the hydraulic isolation between casing and formation. For slurries to meet the requirements for application in a certain well, some care in the project should be taken into account to obtain a cement paste with the proper composition. In most cases, it is necessary to add chemicals to the cement to modify its properties, according to the operation conditions and thus obtain slurries that can move inside the jacket providing a good displacement to the interest area. New technologies of preparation and use of chemicals and modernization of technological standards in the construction industry have resulted in the development of new chemical additives for optimizing the properties of building materials. Products such as polycarboxylate superplasticizers provide improved fluidity and cohesion of the cement grains, in addition to improving the dispersion with respect to slurries without additives. This study aimed at adapting chemical additives used in civil construction to be used use in oilwell cement slurries systems, using Portland cement CPP-Special Class as the hydraulic binder. The chemical additives classified as defoamer, dispersant, fluid loss controller and retarder were characterized by infrared absorption spectroscopy, thermogravimetric analyses and technological tests set by the API (American Petroleum Institute). These additives showed satisfactory results for its application in cement slurries systems for oil wells. The silicone-based defoamer promoted the reduction of air bubbles incorporated during the stirring of the slurries. The dispersant significantly reduced the rheological parameters of the systems studied. The tests performed with the fluid loss controller and the retarder also resulted in suitable properties for application as chemical additives in cement slurries

Análise das emissões gasosas de um veículo flex funcionando com diferentes combustíveis

Efforts in research and development of new technologies to reduce emission levels of pollutant gases in the atmosphere has intensified in the last decades. In this context, it can be highlighted the modern systems of electronic engine management, new automotive catalysts and the use of renewable fuels which contributes to reduce the environmental impact. The purpose of this study was a comparative analysis of gas emissions from a automotive vehicle, operating with different fuels: natural gas, AEHC or gasoline. To execute the experimental tests, a flex vehicle was installed on a chassis dynamometer equipped with a gas analyzer and other complementary accessories according to the standard guidelines of emission and security procedures. Tests were performed according to NBR 6601 and NBR 7024, which define the urban and road driving cycle, respectively. Besides the analysis of exhaust gases in the discharge tube, before and after the catalyst, using the suction probe of the gas analyzer to simulate the vehicle in urban and road traffic, were performed tests of fuel characterization. Final results were conclusive in indicating leaded gasoline as the fuel which most contributed with pollutant emissions in atmosphere and the usual gasoline being the fuel which less contributed with pollutant emissions in atmosphere

Bioecologia da ictiofauna marinha descartada pelo arrasto camaroeiro em praias da Bacia Potiguar, Brasil

The composition of ichthyofauna discarded by trawling shrimping, their reproductive status and feeding ecology were studied on the beaches of Basin Rio Grande do Norte, Brazil. Fish were collected monthly in the year of 2012. During biometrics, portions of the digestive tract and of gonads were removed, fixed in formalin 10% and Bouin, respectively, for be submitted to histological processing by the techniques of hematoxylin-eosin. Stomach content analyzes were performed using the methods of Frequency of Occurrence and Volumetric and was calculated the repletion index. Throughout the study period were recorded a total of 49 species. The fish assemblages differed between sections monitoring, with the highest abundance, biomass and indices of richness and diversity in sections B, D and C. Already the excerpt A, showed higher values for dominance and equitability. In the cluster analysis according to the faunal similarity was observed the formation of three groups: group I formed by excerpts B and D, group II by excerpt C and group III formed by excerpt A. The assessment of reproductive stage revealed that the fish assemblages discarded by trawling are composed mainly of juveniles. Regarding the feeding ecology, the species Larimus breviceps, Menticirrhus littoralis and Pomadasys corvinaeformis characterized as carnivorous with tendency to carcinofagia. Already Conodon nobilis characterized as carnivorous with tendency to piscivory, but all proved generalist-opportunistic with increase of feeding activity during drought. The dendrogram of grouping of the species developed based on the food items used shows the formation of four groups: Group I consists of species that feed mainly of "gastropod" and "sediment"; group II of "teleost fish"; the group III of "crustacea" and group IV of "echinodermata" and "bivalve". The anatomical and histological characteristics of the digestive tract were consistent with the dietary habits of the analyzed species. In this context, the Costa Branca of Rio Grande do Norte can be considered a feeding site and recruitment for juveniles, which, opportunistically, utilize resources associated with the background

Identificação e fatores de virulência de Candida spp isoladas da cavidade bucal de transplantados renais do hospital universitário Onofre Lopes em Natal-RN

Despite Candida species are often human commensals isolated from various oral sites such as: tongue, cheek and palatal mucosa plus subgingival region, there are some properties linked to the organism commonly known as virulence factors which confer them the ability to produce disease. Oral candidiasis is one of the main oral manifestations reported in literature related to kidney transplant patients. The objectives of the present study were to identify and investigate virulence factors of yeasts isolated from the oral cavity of kidney transplant recipients admitted at the Hospital Universitário Onofre Lopes, in Natal RN. Seventy Candida species isolated from 111 kidney transplant recipients were investigated in this study. Identification of the isolates was performed by using the evidence of germ tube formation, hypertonic broth, tolerance to grow at 42°C, micromorphology and biochemical profiles. We observed a high rate of isolation of yeasts from the oral cavity of kidney transplant recipients (63.1%) being C. albicans was the most prevalent species. Oral candidiasis was diagnosed in 14.4% of transplant recipients. We evaluated virulence properties of the isolates regarding to: biofilm formation on polystyrene microplates as well as XTT reduction, adherence to acrylic resin and human buccal epithelial cells and proteinase activity. Most isolates were able to form biofilm by the method of adhesion to polystyrene. All isolates of Candida spp. remained viable during biofilm formation when analyzed by the method of XTT reduction. The number of CFU attached to the acrylic resin suggested high adherence for C. parapsilosis. C. albicans isolates showed higher median adherence to human buccal epithelial cells than non-C. albicans Candida isolates. Nevertheless, this difference was not statistically significant. C. dubliniensis showed low ability to adhere to plastic and epithelial cells and biofilm formation. Proteolytic activity was observed for all the isolates investigated, including the unique isolate of C. dubliniensis. There was a statistically significant association between proteinase production and the presence of oral candidiasis. Studies related to oral candidiasis in renal transplant recipients are limited to clinical and epidemiological data, but investigations concerning Candida spp. virulence factor for this group of individuals are still scarce. We emphasize the importance of studies related to virulence factors of yeasts isolated from this population to contribute to the knowledge of microbiological aspects of oral candidiasis

Estudo dos genes do complexo do antígeno leucocitário humano (hla) associados à susceptibilidade ao diabetes mellitus tipo 1

Of all of the genes associated with the development of Diabetes mellitus type 1 (T1D), the largest contribution comes from the genes in the Human Leukocyte Antigen (HLA) region, mostly the class II DR e DQ genes. Specific combinations of alleles DRB1, DQA1 and DQB1 constituting haplotypes, and further, a combination of more than one haplotype, providing multilocus genotypes are associated with susceptibility, protection and neutrality to DM1. Thus, the aim of present study was to verified the association of polymorphisms of HLA genes class II with susceptibility to type 1 diabetes mellitus (T1D). Ninety-two patients with T1D and 100 individuals normoglycemics (NG) aged between 6 and 20 years were studied. Genomic DNA was obtained from peripheral whole blood, collected in EDTA tube, using the extraction kit Illustra Triple Prep®, GE Healthcare. For HLA typing was used DNA LABType system by One Lambda kit applying Luminex® technology to the method of PCRSSO typing reverse. The alleles DRB1*03:01, *04:05, *04:01, *04:02, DQA1*03:01g, *05:01g, DQB1*02:01g, *03:02, the haplotypes DRB1*03:01-DQA1*05:01-DQB1*02:01, DRB1*04:05-DQA1*03:01g-DQB1*03:02, DRB1*04:02-DQA1*03:01g-DQB1*03:02, DRB1*04:01-DQA1*03:01g-DQB1*03:02 and DR3-DQ2/DR4-DQ8 genotype were significantly associated with the chance of developing T1D. The alleles DRB1*11:01, *15:03, *15:01, *13:01, DQA1*01:02, *04:01g, *01:03, DQB1*06:02, *03:01g, *06:03, *04:02, the haplotypes DRB1*11:01-DQA1*05:01-DQB1*03:01, DRB1*13:01-DQA1*01:03-DQB1*06:03 and DRX-DQX/DRX-DQX genotype, formed by other than the DR3-DQ2 or DR4-DQ8 haplotypes, were significantly associated with T1D protection Despite the major racial Brazilian, even at the regional level, these results are similar to the majority of alleles, genotypes and haplotypes of HLA class II-related susceptibility or resistance to T1D, extensively described in the literature for Caucasian population. Children with age at diagnosis less than 5 years of age had significantly higher frequency of the heterozygous genotype DR3-DQ2/DR4-DQ8 compared to children with age at diagnosis than 5 years old. These results also demonstrate strong association of the genetic profile of the class II HLA for this age group, possibly associated with the severity and rapid progression to the onset of T1D. The knowledge of HLA class II genes may be useful in genetic screens that allow the prediction of T1D

Mobilidade do sulfentrazone em Nitossolo Vermelho e em Neossolo Quartzarênico

O objetivo deste trabalho foi determinar a mobilidade do herbicida sulfentrazone em duas classes de solos (Nitossolo Vermelho e Neossolo Quartzarênico), em função de índices pluviométricos crescentes, sendo, portanto, influenciado pelas propriedades químicas e físicas dos solos com diferentes teores de ferro. em tubos de PVC de 10 cm de diâmetro por 50 cm de comprimento, preenchidos com os solos e saturados com água a 65% (p/p), foi aplicado o sulfentrazone (800 g ha-1). Na seqüência, foram simuladas chuvas diárias de 10 mm até atingir os índices pluviométricos de 30, 60 e 90 mm. Os tubos de PVC foram então desmontados - semeando-se Sorghum bicolor nas profundidades correspondentes de 2,5; 7,5; 12,5; 17,5; 22,5; e 30,0 cm da superfície do tubo - e mantidos em casa de vegetação por 15 dias, para avaliação da germinação e do crescimento inicial das plântulas. No final do experimento foram avaliadas as alterações morfofisiológicas que caracterizavam os efeitos tóxicos do produto, além de se medir o comprimento da parte aérea até a última lígula visível e a fitomassa seca das plantas. Quando sob precipitação de 90 mm no Neossolo Quartzarênico, o sulfentrazone formou uma banda de arraste de até 12,5 cm e, no Nitossolo Vermelho, até os 7,5 cm.

Influência do momento de coleta sobre a viabilidade de grão de pólen em maracacujá - doce (Passiflora alata Curtis)

O objetivo deste trabalho foi verificar o melhor momento para a coleta do grão de pólen de Passiflora alata, com relação à sua maior viabilidade. Foram coletados 35 botões florais, 7 de cada horário de coleta (8h 40, um dia antes da antese, 8h 40, 10h 45 e 16h, no dia da antese e 8h 40, um dia após a antese). Os testes foram feitos por coloração e germinação in vitro. utilizou-se o delineamento inteiramente casualizado, com 5 tratamentos e 7 repetições, e as médias foram comparadas pelo teste de Tukey, a 5% de probabilidade. O teste de viabilidade por coloração variou de 69,64 (no dia da antese, 16 horas) a 75,91% (um dia antes da antese). A porcentagem de germinação variou de 49,18 (24 horas após a antese) a 62,65% (no dia da antese, 10h 45). O melhor momento de coleta do pólen, com relação à melhor viabilidade e germinação, é 10h 45, no dia da antese.

Mobilidade do sulfentrazone em latossolo vermelho e em chernossolo

Este trabalho objetivou determinar a mobilidade do sulfentrazone em duas classes de solos em função de índices pluviométricos, bem como possíveis influências das propriedades químicas e físicas de Latossolo Vermelho e Chernossolo com diferentes teores de ferro na ação do herbicida. Foram utilizados como recipientes 36 tubos de PVC de 10 cm de diâmetro por 50 cm de comprimento. Os recipientes foram preenchidos com os solos e umedecidos a 65% (p/p) da capacidade de saturação, quando se fez a aplicação do sulfentrazone (800 g ha-1 de i.a.) na área exposta dos solos. Na seqüência, foram simuladas chuvas diárias de 10 mm até atingir o índice pluviométrico desejado (30, 60 e 90 mm), sendo, posteriormente, desmontados seis tubos de cada solo (com e sem aplicação). Foram semeadas cinco sementes de sorgo (Sorghum bicolor) nas profundidades de 2,5; 7,5; 12,5; 17,5; 22,5; e 30,0 cm, mantidas em casa de vegetação por 15 dias para avaliação da germinação e do crescimento inicial. Decorrido esse tempo, foi realizada avaliação de possíveis alterações morfofisiológicas que pudessem ser caracterizadas como efeitos tóxicos do produto e mediu-se o comprimento da parte aérea até a última lígula visível. As partes aéreas foram secas em estufa com circulação forçada de ar (70 ºC por 96 horas), para obtenção de matéria seca. No Chernossolo ocorreu uniformidade da distribuição do produto ao longo do tubo, proporcional à precipitação, e no Latossolo Vermelho o sulfentrazone foi pouco móvel, permanecendo na camada superficial, independentemente da precipitação.

Comparação entre duas técnicas de neurorrafia do digital palmar em eqüinos

Foram comparadas duas técnicas de neurorrafia em seis eqüinos, divididos em três grupos (G), conforme o tempo para a biópsia. Os animais foram submetidos a neurectomia dos nervos digitais palmares (NDP) e aplicaram-se duas suturas epineurais (SE) e suturas com tubos de silicone (STS) em cada animal. Avaliaram-se os animais mensalmente pelo teste de sensibilidade e exame do aparelho locomotor até a realização das biópsias dos NDP. Aos 30 dias pós-cirurgia foi realizada biópsia no GI, aos 60 dias no GII e aos 180 dias no GIII. Macroscopicamente, o NDP encontrou-se envolvido por tecido conjuntivo fibroso. Microscopicamente, constataram-se proliferação axonal em uma amostra do GI e neuromas nas amostras dos GI, GII e GIII. Houve proliferação de tecido conjuntivo em todos os grupos no local de reparação para SE e adentrando no interior do tubo na STS. Visibilizaram-se infiltrado de células inflamatórias, alterações no coto proximal e degeneração no coto distal na SE e na STS. As técnicas não apresentaram resultados satisfatórios quanto ao grau de regeneração do coto proximal até o coto distal.

Avaliação de tanques de escorva utilizados em substituição à válvula-de-pé em instalações de bombeamento

A maioria das instalações de abastecimento de água utiliza bombas hidráulicas do tipo turbobombas, requerendo que o interior de sua carcaça e da tubulação de sucção esteja preenchido com água (escorvados) para que a sucção da água possa ser efetivada. O escorvamento das bombas pode ser efetuado instalando-as abaixo do reservatório de captação (bomba afogada). Quando a bomba está acima do reservatório e o escorvamento é manual, é necessário usar válvulas-de-pé, que são suscetíveis ao mau funcionamento, limitando a confiabilidade do sistema, principalmente em caso de automação. Como alternativa à válvula-de-pé, neste trabalho, foram estudados dois tanques escorva, testados no Laboratório de Hidráulica e Irrigação da FCAV/UNESP - Jaboticabal, avaliando-se situações de altura manométrica de sucção de bomba centrífuga e relações entre volume útil do tanque e volume do tubo de sucção, tendo-se concluído: a) o volume do tanque de escorva é função do volume do tubo de sucção da instalação de bombeamento e da altura manométrica de sucção; b) o volume do tanque de escorva pode ser calculado seguindo-se a Lei de Boyle, com percentagem de acréscimo que, neste estudo, foi de 10% para um modelo de tanque e de 30% para o segundo modelo.

Efeito de quatro tipos de mel na longevidade e reprodução de Catolaccus grandis (Hymenoptera:pteromalidae)

O trabalho teve como objetivo conhecer o melhor tipo de mel em relação à longevidade e fertilidade do parasitóide do bicudo-do-algodoeiro Catolaccus grandis. Adultos recém-emergidos foram transferidos para recipientes plásticos de 500mL, adaptados com tubo para fornecer água e umidade para os insetos. Um casal do parasitóide foi mantido em cada recipiente em câmara climatizada a 25±1°C, UR = 70±10% e fotoperíodo de 14h. O trabalho constou de 4 tratamentos: mel de flor de laranjeira; mel de flores de plantas silvestres; mel de cana-de-açúcar (todos produzidos por Apis mellifera) e mel de flores silvestres produzido por abelha Jataí (Tetragonistica angustula), com 15 repetições cada. Adultos recém-emergidos do parasitóide receberam cinco larvas de Euscepes postfasciatus encapsuladas em parafilm. Três gotículas de mel foram colocadas sobre o parafilm. Calculou-se a longevidade de machos e fêmeas, número de ovos dia-1 fêmea-1 e número total de ovos fêmea-1 e construíram-se as tabelas de fertilidade. As melhores dietas para alimentar adultos de C. grandis foram o mel silvestre e o de laranjeira. A melhor fecundidade foi observada na dieta de mel de laranjeira (101,60 ovos fêmea-1) e os melhores resultados para aumento reprodutivo e populacional deste parasitóide foram obtidos com mel de laranja e com mel silvestre.

Detecção, transmissão e efeito de Xanthomonas campestris pv. campestris na qualidade fisiológica de sementes de brócolis

A detecção, a transmissão e o efeito de Xanthomonas campestris pv. campestris (Xcc) na qualidade fisiológica de sementes de brócolis (Brassica oleracea var. italica) foram avaliados, a partir de sementes obtidas de plantas (Baron, Flórida, Hana Midori Sakata, Precoce Piracicaba de Verão, Ramoso Santana e Sabre) inoculadas com a bactéria, em condições de campo. Para a detecção do patógeno nas sementes foram utilizados os meios de cultura semi-seletivos: SX ágar, NSCAA e BSCAA; a taxa de transmissão da bactéria pelas sementes às plântulas foi avaliada usando semeadura em areia e meio de cultura contido em tubo de ensaio. Para a avaliação da qualidade fisiológica de sementes foram realizados o teste padrão de germinação e os testes de vigor: envelhecimento acelerado, índice de velocidade de emergência, crescimento de plântulas e massa seca. de acordo com os resultados, o meio de cultura semi-seletivo NSCAA foi mais eficaz para detectar Xcc em sementes de brócolis; não houve diferença significativa entre os genótipos na taxa de transmissão da bactéria pelas sementes e Xcc não afetou a germinação e o vigor das sementes.