Comparison of dynamic effects of high-speed traffic load on ballasted track using a simplified two-dimensional and full three-dimensional model.

The vertical dynamic actions transmitted by railway vehicles to the ballasted track infrastructure is evaluated taking into account models with different degree of detail. In particular, we have studied this matter from a two-dimensional (2D) finite element model to a fully coupled three-dimensional (3D) multi-body finite element model. The vehicle and track are coupled via a non-linear Hertz contact mechanism. The method of Lagrange multipliers is used for the contact constraint enforcement between wheel and rail. Distributed elevation irregularities are generated based on power spectral density (PSD) distributions which are taken into account for the interaction. The numerical simulations are performed in the time domain, using a direct integration method for solving the transient problem due to the contact nonlinearities. The results obtained include contact forces, forces transmitted to the infrastructure (sleeper) by railpads and envelopes of relevant results for several track irregularities and speed ranges. The main contribution of this work is to identify and discuss coincidences and differences between discrete 2D models and continuum 3D models, as wheel as assessing the validity of evaluating the dynamic loading on the track with simplified 2D models

Three Dichotomies in Lawyers’ Ethics (With Particular Attention to the Corporation as Client)

Three usually unexpressed, and too often unnoticed, conceptual dichotomies underlie our perception and understanding of lawyers’ ethics. First, the existence of a special body of professional ethics and professional regulation presupposes some special need or risk. Criminal and civil law are apparently insufficient. Ordinary day-to-day morality and ordinary ethics, likewise, are not considered to be enough. What is the risk entailed by the notion of a profession that is special; who needs protection, and from what? Two quite different possible answers to this question provide the first of the three dichotomies examined in this article: one can understand the risk as primarily to a vulnerable client from a powerful professional; or, to the contrary, from a powerful client-lawyer combination toward vulnerable others. Second, what is the foundational orientation of lawyers? Are lawyers serving primarily their particular clients, and those clients’ preferences, choices and autonomy? Or is the primary allegiance of lawyers to some community or collective goal or interest distinct from the particular goals or interests of the client? The third dichotomy concerns not the substance of the risk, or the primary orientation, but the appropriate means of responding to that risk or that fundamental obligation. Should professional ethics be implemented primarily through rules? Or, should we rely on character and the discretion of lawyers to make a thought out, all things considered, decision? Each of these three presents a fundamental difference in how we perceive and address issues of lawyers’ ethics. Each affects our understanding and analysis on multiple levels, from (1) determining the appropriate or requisite conduct in a particular situation, to (2) framing a specific rule or approach for a particular category of situations, to (3) more general or abstract theory or policy. A person’s inclinations in regard to the dichotomies affects the conclusions that person will reach on each of those levels of analysis, yet those inclinations and assumptions are frequently unexamined and unarticulated. One’s position on each of the dichotomies tends to structure the approach and outcome without the issues and choice having been explicitly addressed or possibly even noticed. This article is an effort to ameliorate that problem. Part I addresses the question of what is the risk in the work of lawyers, or the function of lawyers, for which professional ethics is the answer. The concluding section focuses on the particular problem of the corporation as client. Part II then asks the related and possibly consequent question of what is the foundational orientation or allegiance of the lawyer? Is it to the individual client? Or is it to some larger community interest? Again, the concluding section focuses on the corporation. Part III turns to the means or method for addressing the obligations and possible problems of the professional ethics of lawyers. Should lawyers’ ethics guide and confine the conduct of lawyers primarily through rules? Or should it function primarily through reliance on the knowledge, judgment and character of lawyers? If the latter were the guide, ethical decisions would be made on a situation by situation basis under the discretion of each lawyer. Toward the end of each discussion possibilities for bridging the dichotomy are considered (and with such bridges each dichotomy may come to look more like a spectrum or continuum.). At several points after its introduction in Parts I and II, the special problem of the corporation as client is revisited and possible solutions suggested. Illustrating the usefulness of keeping the dichotomies in view, Part IV applies them to several exemplary situations of ethical difficulty in actual lawyer practice. For readers finding it difficult to envision the consequences of these distinctions, turning ahead to Part IV may be useful in making the discussion more concrete. Some commonalities across the dichotomies and connections among them are then developed in the concluding section, Part V.

Three Dichotomies in Lawyers’ Ethics (With Particular Attention to the Corporation as Client)

Three usually unexpressed, and too often unnoticed, conceptual dichotomies underlie our perception and understanding of lawyers’ ethics. First, the existence of a special body of professional ethics and professional regulation presupposes some special need or risk. Criminal and civil law are apparently insufficient. Ordinary day-to-day morality and ordinary ethics, likewise, are not considered to be enough. What is the risk entailed by the notion of a profession that is special; who needs protection, and from what? Two quite different possible answers to this question provide the first of the three dichotomies examined in this article: one can understand the risk as primarily to a vulnerable client from a powerful professional; or, to the contrary, from a powerful client-lawyer combination toward vulnerable others. Second, what is the foundational orientation of lawyers? Are lawyers serving primarily their particular clients, and those clients’ preferences, choices and autonomy? Or is the primary allegiance of lawyers to some community or collective goal or interest distinct from the particular goals or interests of the client? The third dichotomy concerns not the substance of therisk, or the primary orientation, but the appropriate means of responding to that risk or that fundamental obligation. Should professional ethics be implemented primarily through rules? Or, should we rely on character and the discretion of lawyers to make a thought out, all things considered, decision? Each of these three presents a fundamental difference in how we perceive and address issues of lawyers’ ethics. Each affects our understanding and analysis on multiple levels, from (1) determining the appropriate or requisite conduct in aparticular situation, to (2) framing a specific rule or approach for a particular category of situations, to (3) more general or abstract theory or policy. A person’s inclinations in regard to the dichotomies affects the conclusions that person will reach on each of those levels of analysis, yet those inclinations and assumptions are frequently unexamined and unarticulated. One’s position on each of the dichotomies tends to structure the approach and outcome without the issues and choice having been explicitly addressed or possibly even noticed. This article is an effort to ameliorate that problem. Part I addresses the question of what is the risk in the work of lawyers, or the function of lawyers, for which professional ethics is the answer. The concluding section focuses on the particular problem of the corporation as client. Part II then asks the related and possibly consequent question of what is the foundational orientation or allegiance of the lawyer? Is it to the individual client? Or is it to some larger community interest? Again, the concluding section focuses on thecorporation. Part III turns to the means or method for addressing the obligations and possible problems of the professional ethics of lawyers. Should lawyers’ ethics guide and confine the conduct of lawyers primarily through rules? Or should it function primarily through reliance on the knowledge, judgment and character of lawyers? If the latter were the guide, ethical decisions would be made on a situation by situation basis under the discretion of each lawyer. Toward the end of each discussion possibilities for bridging the dichotomy are considered (and with such bridges each dichotomy may come to look more like a spectrum or continuum.). At several points after its introduction in Parts I and II, the special problem of the corporation as client is revisited and possible solutions suggested. Illustrating the usefulness of keeping the dichotomies in view, Part IV applies them to several exemplary situations of ethical difficulty in actual lawyer practice. For readers finding it difficult to envision the consequences of these distinctions, turning ahead to Part IV may be useful in making the discussion more concrete. Some commonalities across the dichotomies and connections among them are then developed in the concluding section, Part V.

The problem of the world and the church reconsidered in three letters to a friend /

With an introduction by James Booth, C. B.

Implementation cost to consumers of Part 581 - Bumper Standard, Phase II; weight and cost study of three "X" body bumper systems; and consumer replacement cost for complete bumper systems studied. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

The great Mississippi highway; a three-fold transportation artery, water, rail and automobile. 1200 miles of winding channel, hazardous to navigation, reduced to 600 miles of direct, safe, rapid transportation ... would permanently eliminate the flood problem ...

Folded plan laid in.

The natural method of cureing the diseases of the body and the disorders of the mind, depending on the body : in three parts, Part I. General reflections ... Part II. The means and method for preserving life and faculties ..., Part III. Reflections on the nature and cure of particular chronical distempers /

Mode of access: Internet.

The effect of waves on the ideal fluid forces acting on a slender axisymmetric body having three degrees of freedom /

Mode of access: Internet.

English physician enlarged : with three hundred and sixty-nine medicines, made of English herbs, that were not in any impression until this : being an astrologo-physical discourse of the vulgar herbs of this nation; containing a compleat method of physick, whereby a man may preserve his body in health, or cure himself, being sick ... /

Signatures: A-R¹²

Elocution; or, Mental and vocal philosophy: involving the principles of reading and speaking; and designed for the development and cultivation of both body and mind ... illustrated by two or three hundred choice anecdotes; three thousand oratorical and poetical readings; five thousand proverbs, maxims and laconics, and several hundred elegant engravings.

Mode of access: Internet.

Elocution; or, Mental and vocal philosophy: involving the principles of reading and speaking; and designed for the development and cultivation of both body and mind ... illustrated by two or three hundred choice anecdotes; three thousand oratorical and poetical readings; five thousand proverbs, maxims and laconics, and several hundred elegant engravings.

Mode of access: Internet.

The influence of cutting tool geometry upon aspects of chip flow and tool wear:a theoretical, three dimensional examination of the cutting geometry and the shape of the twist drill

This work is undertaken in the attempt to understand the processes at work at the cutting edge of the twist drill. Extensive drill life testing performed by the University has reinforced a survey of previously published information. This work demonstrated that there are two specific aspects of drilling which have not previously been explained comprehensively. The first concerns the interrelating of process data between differing drilling situations, There is no method currently available which allows the cutting geometry of drilling to be defined numerically so that such comparisons, where made, are purely subjective. Section one examines this problem by taking as an example a 4.5mm drill suitable for use with aluminium. This drill is examined using a prototype solid modelling program to explore how the required numerical information may be generated. The second aspect is the analysis of drill stiffness. What aspects of drill stiffness provide the very great difference in performance between short flute length, medium flute length and long flute length drills? These differences exist between drills of identical point geometry and the practical superiority of short drills has been known to shop floor drilling operatives since drilling was first introduced. This problem has been dismissed repeatedly as over complicated but section two provides a first approximation and shows that at least for smaller drills of 4. 5mm the effects are highly significant. Once the cutting action of the twist drill is defined geometrically there is a huge body of machinability data that becomes applicable to the drilling process. Work remains to interpret the very high inclination angles of the drill cutting process in terms of cutting forces and tool wear but aspects of drill design may already be looked at in new ways with the prospect of a more analytical approach rather than the present mix of experience and trial and error. Other problems are specific to the twist drill, such as the behaviour of the chips in the flute. It is now possible to predict the initial direction of chip flow leaving the drill cutting edge. For the future the parameters of further chip behaviour may also be explored within this geometric model.

A new three phase method (SDP method) for the multi-objective vehicle routing problem with simultaneous delvery and pickup (VRPSDP)

Transportation service operators are witnessing a growing demand for bi-directional movement of goods. Given this, the following thesis considers an extension to the vehicle routing problem (VRP) known as the delivery and pickup transportation problem (DPP), where delivery and pickup demands may occupy the same route. The problem is formulated here as the vehicle routing problem with simultaneous delivery and pickup (VRPSDP), which requires the concurrent service of the demands at the customer location. This formulation provides the greatest opportunity for cost savings for both the service provider and recipient. The aims of this research are to propose a new theoretical design to solve the multi-objective VRPSDP, provide software support for the suggested design and validate the method through a set of experiments. A new real-life based multi-objective VRPSDP is studied here, which requires the minimisation of the often conflicting objectives: operated vehicle fleet size, total routing distance and the maximum variation between route distances (workload variation). The former two objectives are commonly encountered in the domain and the latter is introduced here because it is essential for real-life routing problems. The VRPSDP is defined as a hard combinatorial optimisation problem, therefore an approximation method, Simultaneous Delivery and Pickup method (SDPmethod) is proposed to solve it. The SDPmethod consists of three phases. The first phase constructs a set of diverse partial solutions, where one is expected to form part of the near-optimal solution. The second phase determines assignment possibilities for each sub-problem. The third phase solves the sub-problems using a parallel genetic algorithm. The suggested genetic algorithm is improved by the introduction of a set of tools: genetic operator switching mechanism via diversity thresholds, accuracy analysis tool and a new fitness evaluation mechanism. This three phase method is proposed to address the shortcoming that exists in the domain, where an initial solution is built only then to be completely dismantled and redesigned in the optimisation phase. In addition, a new routing heuristic, RouteAlg, is proposed to solve the VRPSDP sub-problem, the travelling salesman problem with simultaneous delivery and pickup (TSPSDP). The experimental studies are conducted using the well known benchmark Salhi and Nagy (1999) test problems, where the SDPmethod and RouteAlg solutions are compared with the prominent works in the VRPSDP domain. The SDPmethod has demonstrated to be an effective method for solving the multi-objective VRPSDP and the RouteAlg for the TSPSDP.