Variation of Laser Intensity on the Healing of Cutaneous Wounds

Tissue repair is an integration of dynamic interactive processes that involves soluble mediators, blood components, production of extra-cellular matrix and mesenchymal cells. Many studies involving the use of LLLT shows that the healing process is favored by such therapy. The aim of this work was to evaluate, through histological analysis, the tissue effects of cutaneous wounds submitted to different intensities and a same irradiation dose with lasers in λ670 or λ685nm. Eighteen animals were divided in two experimental groups according to wavelength used (λ670 or λ685nm). Each one of these groups was divided still in three subgroups of three animals each, related to the intensity of applied irradiation (2, 15 or 25mW). Twelve animals acted as untreated controls and were not irradiated. The irradiation was carried out during seven days. The animals were sacrificed eight days after surgery. The specimens were removed, kept in 4% formaldehyde for 24 hours, routinely prepared to wax, stained with H&E and analyzed under light microscopy. The histological characteristics observed, so much in the irradiated animals, as in the control, they are indicative of a substitution repair process, however, the LLLT modulatory positive effect was observed, in the healing process, mainly associate to the use of the shorter wavelength and low power. The results of the present study indicate that LLLT improves cutaneous wound repair and best results are achieved when higher potencies associated to short wavelengths or lower potencies associated to higher wavelengths are used.

Digital radiographic evaluation of optical density of porcelains used for fabrication of inlay/onlay prosthesis

The purpose of this article was to compare the mean value of optical density of four porcelains commonly used for fabrication of inlay/ onlay prostheses using direct digital radiograph. The sample consisted of 20 2-mm thick porcelain specimens (measured by digital pachymeter): Empress (Ivoclair), Simbios (Degussa), Vita Omega 900 and Vitadur Alpha (Vita Zahnfabrik). The values of optical density of the specimens were expressed in millimeters aluminum equivalent (mm eq Al). The samples were X-rayed using two charge coupled devices (CCD) - RVG (Trophy) - Visualix (Gendex) and a phosphor plate system - Digora (Soredex). The optical density reading was performed with Image Tool 1.28 in a total of 110 measurements. Statistical analysis showed that there were statistically significant differences in all materials studied (p < 0.05) regardless of the radiographic system used. The highest optical density value was found for Omega 900 (1.8988 mmeqAl - Visualix - Gendex) and the lowest for Vitadur Alpha (0.8647 - Visualix - Gendex). Thus, the material presenting the highest degree of optical density was Omega 900, Empress and Simbios presented intermediate optical density values, Vitadur Alpha presented the lowest value, and the optical density of porcelains was not influenced by the digital radiography systems.

Radiopacity of restorative materials using digital images

The radiopacity of esthetic restorative materials has been established as an important requirement, improving the radiographic diagnosis. The aim of this study was to evaluate the radiopacity of six restorative materials using a direct digital image system, comparing them to the dental tissues (enamel-dentin), expressed as equivalent thickness of aluminum (millimeters of aluminum). Five specimens of each material were made. Three 2-mm thick longitudinal sections were cut from an intact extracted permanent molar tooth (including enamel and dentin). An aluminum step wedge with 9 steps was used. The samples of different materials were placed on a phosphor plate together with a tooth section, aluminum step wedge and metal code letter, and were exposed using a dental x-ray unit. Five measurements of radiographic density were obtained from each image of each item assessed (restorative material, enamel, dentin, each step of the aluminum step wedge) and the mean of these values was calculated. Radiopacity values were subsequently calculated as equivalents of aluminum thickness. Analysis of variance (ANOVA) indicated significant differences in radiopacity values among the materials (P<0.0001). The radiopacity values of the restorative materials evaluated were, in decreasing order: TPH, F2000, Synergy, Prisma Flow, Degufill, Luxat. Only Luxat had significantly lower radiopacity values than dentin. One material (Degufill) had similar radiopacity values to enamel and four (TPH, F2000, Synergy and Prisma Flow) had significantly higher radiopacity values than enamel. In conclusion, to assess the adequacy of posterior composite restorations it is important that the restorative material to be used has enough radiopacity, in order to be easily distinguished from the tooth structure in the radiographic image. Knowledge on the radiopacity of different materials helps professionals to select the most suitable material, along with other properties such as biocompatibility, adhesion and esthetic.

Developing new radiotherapy techniques using linac based gamma radiation sources

A major challenge in cancer radiotherapy is to deliver a lethal dose of radiation to the target volume while minimizing damage to the surrounding normal tissue. We have proposed a model on how treatment efficacy might be improved by interfering with biological responses to DNA damage using exogenous electric fields as a strategy to drastically reduce radiation doses in cancer therapy. This approach is demonstrated at this Laboratory through case studies with prokaryotes (bacteria) and eukaryotes (yeast) cells, in which cellkilling rates induced by both gamma radiation and exogenous electric fields were measured. It was found that when cells exposed to gamma radiation are immediately submitted to a weak electric field, cell death increases more than an order of magnitude compared to the effect of radiation alone. This finding suggests, although does not prove, that DNA damage sites are reached and recognized by means of long-range electric DNA-protein interaction, and that exogenous electric fields could destructively interfere with this process. As a consequence, DNA repair is avoided leading to massive cell death. Here we are proposing the use this new technique for the design and construction of novel radiotherapy facilities associated with linac generated gamma beams under controlled conditions of dose and beam intensity.

Measurement of orthovoltage X-ray intensity with a lithium niobate transducer

A microcontrolled instrument for measuring the energy fluence rate (or intensity) of X-ray pulses in the orthovoltage range of 120 to 300 kV is described. The prototype instrument consists of a pyroelectric sensor, a low-noise highsensitivity current-to-voltage converter, a microcontroller and a digital display. The response of the instrument is nonlinear with the intensity of the radiation. The precision is better than 3%. The equipment is inexpensive, rugged, simple to construct and has good long-term stability. © 2009 Springer-Verlag.

Detection of cavitated approximal surfaces using cone beam CT and intraoral receptors

Objectives: The aim of this study was to compare cone beam CT (CBCT) in a small field of view (FOV) with a solid-state sensor and a photostimulable phosphor plate system for detection of cavitated approximal surfaces. Methods: 257 non-filled approximal surfaces from human permanent premolars and molars were recorded by two intraoral digital receptors, a storage phosphor plate (Digora Optime, Soredex) and a solid-state CMOS sensor (Digora Toto, Soredex), and scanned in a cone beam CT unit (3D Accuitomo FPD80, Morita) with a FOV of 4 cm and a voxel size of 0.08 mm. Image sections were carried out in the axial and mesiodistal tooth planes. Six observers recorded surface cavitation in all images. Validation of the true absence or presence of surface cavitation was performed by inspecting the surfaces under strong light with the naked eye. Differences in sensitivity, specificity and agreement were estimated by analysing the binary data in a generalized linear model using an identity link function. Results: A significantly higher sensitivity was obtained by all observers with CBCT (p,0.001), which was not compromised by a lower specificity. Therefore, a significantly higher overall agreement was obtained with CBCT (p,0.001). There were no significant differences between the Digora Optime phosphor plate system and the Digora Toto CMOS sensor for any parameter. Conclusions: CBCT was much more accurate in the detection of surface cavitation in approximal surfaces than intraoral receptors. The differences are interpreted as clinically significant. A CBCT examination performed for other reasons should also be assessed for approximal surface cavities in teeth without restorations. © 2013 The British Institute of Radiology.

Avaliação da relação entre as atividades de engorda e pesque-pague e as características limnológicas destes ambientes aquáticos

Pós-graduação em Aquicultura - FCAV

Estrutura eletrônica do polímero orgânico conjugado MEH-PPV em solução sob radiação ionizante

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Caracterização das propriedades termoluminescentes de sedimentos da formação geológica Rio Claro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo de propriedades dosimétricas utilizando polímero organometálico em solução

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise pedoestratigráfica das formações Rio Claro e Piraçununga, no Centro-Leste do Estado de São Paulo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Contribuição da dinâmica morfoestrutural e morfoescultural na estruturação da bacia do Ribeirão Entupido, complexo alcalino do Passa Quatro - SP

Pós-graduação em Geografia - IGCE

Biocompatibilidade in vitro em amostras densas e porosas de titânio-35nióbio submetidas a tratamento biomimético

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Mineralogy and chemistry of archaeological ceramic fragments from archaeological Dark Earth site in Colombian Amazon

Vários sítios arqueológicos de Terra Preta Arqueológica (TPA) encontrados na floresta Amazônica Colombiana também contêm alto conteúdo de fragmentos cerâmicos semelhantes aqueles da Amazônia Brasileira, como mostra o sítio Quebrada Tacana. Seus fragmentos cerâmicos são amarelo a cinza, exibem matriz argilosa calcinada envolvendo fragmentos de cariapé, carvão e partículas de cinza, grãos de quartzo e micas. A matriz é composta de metacaulinita a material amorfo, quartzo, folhas de micas, clorita e sepiolita. Cariapé e cauixi são constituídos de cristobalita, da mesma forma o carvão e as cinzas. Embora não detectados pela difração de raios x, os fosfatos devem estar presentes, pois foram detectados teores de P2O5 de até 2,90 %, possivelmente como fosfatos de alumínio, já que o conteúdo de Ca está abaixo 0,1 %, o que elimina a possibilidade da presença de apatita. Estas características mineralógicas e químicas permitem relacionar estes fragmentos cerâmicos com aqueles encontrados nos sítios de TPA no Brasil e reforça o fósforo como um importante componente químico, originado pelo contato dos vasos cerâmicos com os alimentos do cotidiano dos povos amazônicos pré-históricos.

The ceramic artifacts in archaeological black earth (terra preta) from lower Amazon region, Brazil: Mineralogy

Sítios arqueológicos com Terra Preta, denominados de Terra Preta de Índio ou ainda Terra Preta Arqueológica (TPA) são muito freqüentes na Amazônia. As TPA geralmente contém fragmentos de vasos cerâmicos, por vezes abundantes, além de líticos, que são materiais de grande importância para os estudos arqueológicos. Para consubstanciar esses estudos, realizou-se pesquisas mineralógicas e químicas em fragmentos cerâmicos provenientes de dois sítios arqueológicos da região de Cachoeira-Porteira, Estado do Pará. Os fragmentos foram classificados segundo seus principais temperos em: cauixi, cariapé, areia+feldspatos e caco de vaso cerâmico. Mineralogicamente são compostos de quartzo, minerais de argila calcinados (especialmente caulinita), feldspatos (albita e microclínio), hematita, goethita, maghemita, variscita-estrengita, fosfatos amorfos, anatásio, e raramente apatita, rhabdophana e óxidos de Mn e Ba. Cauixi e cariapé são componentes orgânicos silicosos e amorfos a DRX. A composição mineralógica e a morfologia dos seus grãos indicam saprólito (material argiloso rico em quartzo) derivado de rochas ígneas félsicas de granulação fina ou rochas sedimentares ricas em argilominerais como matéria-prima dos vasos cerâmicos. Neste material argiloso cauixi, cariapé e/ou areias, ricas em sílica, foram intencionalmente adicionados. O elevado conteúdo de fosfatos de Al-Fe, amorfos ou como de baixa cristalinidade, originou-se a partir do contato entre a matriz argilosa da parede do vaso cerâmico com a solução aquosa quente durante o cozimento diário de alimentos de origem animal (principal fonte de fósforo). A cristalização dos fosfatos deve ter prosseguida mesmo depois que os vasos foram descartados, e juntos com os restos de matéria orgânica vegetal e animal incorporaram-se aos solos residuais. Participaram desta forma na formação dos solos tipo TPA.