Vitamin C: Effects of exercise and requirements with training

Ascorbic acid or vitamin C is involved in a number of biochemical pathways that are important to exercise metabolism and the health of exercising individuals. This review reports the results of studies investigating the requirement for vitamin C with exercise on the basis of dietary vitamin C intakes, the response to supplementation and alterations in plasma, serum, and leukocyte ascorbic acid concentration following both acute exercise and regular training. The possible physiological significance of changes in ascorbic acid with exercise is also addressed. Exercise generally causes a transient increase in circulating ascorbic acid in the hours following exercise, but a decline below pre-exercise levels occurs in the days after prolonged exercise. These changes could be associated with increased exercise-induced oxidative stress. On the basis of alterations in the concentration of ascorbic acid within the blood, it remains unclear if regular exercise increases the metabolism of vitamin C. However, the similar dietary intakes and responses to supplementation between athletes and nonathletes suggest that regular exercise does not increase the requirement for vitamin C in athletes. Two novel hypotheses are put forward to explain recent findings of attenuated levels of cortisol postexercise following supplementation with high doses of vitamin C.

Overweight and obesity in Australia: The 1999-2000 Australian Diabetes, Obesity and Lifestyle Study (AusDiab)

Objective: To measure the prevalence of obesity in Australian adults and to examine the associations of obesity with socioeconomic and lifestyle factors. Design: AusDiab, a cross-sectional study conducted between May 1999 and December 2000, involved participants from 42 randomly selected districts throughout Australia. Participants: Of 20 347 eligible people aged greater than or equal to 25 years who completed a household interview, 11247 attended the physical examination at local survey sites (response rate, 55%). Main outcome measures: Overweight and obesity defined by body mass index (BMI; kg/m(2)) and waist circumference (cm); sociodemographic factors (including smoking, physical activity and television viewing time). Results: The prevalence of overweight and obesity (BMI greater than or equal to 25.0 kg/m(2); waist circumference greater than or equal to 80.0 cm [women] or greater than or equal to 94.0 cm [men]) in both sexes was almost 60%, defined by either BMI or waist circumference. The prevalence of obesity was 2.5 times higher than in 1980. Using waist circumference, the prevalence of obesity was higher in women than men (34.1% v 26.8%; P < 0.01). Lower educational status, higher television viewing time and lower physical activity time were each strongly associated with obesity, with television viewing time showing a stronger relationship than physical activity time. Conclusions: The prevalence of obesity in Australia has more than doubled in the past 20 years. Strong positive associations between obesity and each of television viewing time and lower physical activity time confirm the influence of sedentary lifestyles on obesity, and underline the potential benefits of reducing sedentary behaviour, as well as increasing physical activity, to curb the obesity epidemic.

Interação mãe-bebê e uso de chupeta no contexto do nascimento pré-termo : cultura, representações sociais e processos proximais

Objetivo: Investigar a avaliação de mães de recém-nascidos pré-termo (RNPT) egressos de unidades de terapia intensiva neonatal (UTIN) quanto à interação mãe-bebê e uso de chupeta nos primeiros dois anos. Método: O planejamento do estudo longitudinal foi baseado na Teoria Bioecológica do Desenvolvimento Humano, com foco nos processos proximais (PP), utilizando entrevistas gravadas com 62 mães de RNPT no contexto da UTIN e 33 aos seis, 12, 18 e 24 meses de idade do bebê, considerando Grupo-A (chupeta) e Grupo-B (não usou chupeta). Resultados: A vivência em UTIN foi considerada evento impactante na vida das mães, mas expectativas futuras para a relação mãe-bebê foram positivas. A tentativa de oferta da chupeta foi 96,2% e seu uso aos seis meses foi 50% (n=52), significativamente associado com prematuridade pela relação peso/idade-gestacional (p-valor=0,044), dificuldades para estabelecer aleitamento materno exclusivo (AME) (p=0,012) e primiparidade (p=0,02). Apresentaram relação com menor frequência de chupeta: AME ≥3 meses (p=0,026) e tempo de aleitamento materno ≥6 meses. A chupeta configurou-se como uma das representações sociais sobre objetos de bebê, elaboradas pelas participantes aos 12 meses de idade do bebê. Características de temperamento calmo/tranquilo da mãe foram mais frequentes no Grupo-A e o temperamento nervoso/agitado/irritado no Grupo-B (p-valor=0,041). No Grupo-A predominou o temperamento do bebê calmo/fácil-de-cuidar/independente, enquanto no Grupo-B as características de temperamento agitado/bagunceiro/teimoso/agressivo (p-valor=0,026), associado também à necessidade de várias tentativas de oferta da chupeta (p-valor=0,006). No Grupo-A, o número de pessoas para apoio social foi uma ou duas (77,8%), enquanto no Grupo-B foram três a sete (66,7%), p-valor=0,001. A contribuição da chupeta como auxiliar nos PP foi indiferente para mães que controlavam o hábito, enquanto o uso irrestrito facilitava a resolução do choro, liberando a mãe para outras tarefas, atuando como limitador dos PP. A análise da evolução e complexidade dos PP demonstrou não haver interferência pelo uso da chupeta, tendo sido mais efetivos quando as mães tinham maior escolaridade e nas classes econômicas A e B. Conclusão: Aspectos culturais influenciaram na oferta da chupeta, mas sua aceitação ocorreu principalmente em RNPT pequeno para idade gestacional, diante das dificuldades para AME, menor extensão do apoio social e temperamento do bebê calmo/fácil-de-cuidar/independente, também associado à aceitação mais fácil da chupeta. O uso irrestrito da chupeta demonstrou atuar como limitador dos processos proximais.

Teoria da estrutura a termo das taxas de juros

Este estudo usa um modelo intertemporal de equilíbrio geral de precificação de ativos para estudar a estrutura a termo das taxas de juros. Nesse modelo, expectativas, aversão ao risco, alternativas de investimento e preferências quanto ao momento do consumo atuam na determinação dos preços. Muitos fatores tradicionalmente mencionados como influentes sobre a estrutura a termo são, assim, incluídos de uma maneira plenamente condizente com o comportamento maximizador e as expectativas racionais. O modelo leva a fórmulas específicas de preços de debêntures que são bastante adequadas a testes empíricos.

A new chemical route to synthesise TM-doped (TM = Co, Fe) TiO2 nanoparticles

Since the discovery of ferromagnetism well above room temperature in the Co-doped TiO2 system, diluted magnetic semiconductors based on TiO2 doped with transition metals have generated great interest because of their potential use in the development of spintronic devices. The purpose of this paper is to report on a new and swift chemical route to synthesise highly stable anatase single-phase Co- and Fe-doped TiO2 nanoparticles, with dopant concentrations of up to 10 at.-% and grain sizes that range between 20 and 30 nm. Complementary structural, microstructural and chemical analyses of the different nanopowders synthesised strongly support the hypothesis that a homogeneous distribution of the dopant element in the substitutional sites of the anatase structure has been achieved. Moreover, UV/Vis diffuse reflectance spectra of powder samples show redshifts to lower energies and decreasing bandgap energies with increasing Co or Fe concentration, which is consistent with n-type doping of the TiO2 anatase matrix. Films of Co-doped TiO2 were successfully deposited onto Si (100) substrates by the dip-coating method, with suspensions of Ti1-xCOxO2 nanoparticles in ethylene glycol. ((C)Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, Germany, 2008).

Determinants of salivary cotinine level: a population-based study in Brazil

OBJECTIVE: A cross-sectional population-based study was conducted to assess, in active smokers, the relationship of number of cigarettes smoked and other characteristics to salivary cotinine concentrations. METHODS: A random sample of active smokers aged 15 years or older was selected using a stepwise cluster sample strategy, in the year 2000 in Rio de Janeiro, Brazil. The study included 401 subjects. Salivary cotinine concentration was determined using gas chromatography with nitrogen-phosphorus detection. A standard questionnaire was used to collect demographic and smoking behavioral data. The relation between the number of cigarettes smoked in the last 24h and cotinine level was examined by means of a nonparametric fitting technique of robust locally weighted regression. RESULTS: Significantly (p<0.05) higher adjusted mean cotinine levels were found in subjects smoking their first cigarette within five minutes after waking up, and in those smoking 1-20 cigarettes in the last 24h who reported inhaling more than ½ the time. In those smoking 1-20 cigarettes, the slope was significantly higher for those subjects waiting for more than five minutes before smoking their first cigarette after waking up, and those smoking "light" cigarettes when compared with their counterparts. These heterogeneities became negligible and non-significant when subjects with cotinine >40 ng/mL per cigarette were excluded. CONCLUSIONS: There was found a positive association between self-reporting smoking five minutes after waking up, and inhaling more than ½ the time are consistent and higher cotinine levels. These can be markers of dependence and higher nicotine intake. Salivary cotinine proved to be a useful biomarker of recent smoking and can be used in epidemiological studies and smoking cessation programs.

Adaptação cultural de instrumento para avaliação da capacidade física em cardiopatas

OBJETIVO: Validar o conteúdo e avaliar a confiabilidade do instrumento Veterans Specific Activity Questionnaire, adaptado culturalmente para uso na população brasileira de cardiopatas. MÉTODOS: O instrumento foi traduzido, retrotraduzido e analisado por comitê de juízes para avaliação das equivalências semântico-idiomática e cultural. As atividades físicas indicadas no instrumento incomuns ao cotidiano da população-alvo foram substituídas. Outro comitê de especialistas analisou a equivalência metabólica das atividades substituídas. A proporção de concordância de avaliação dos juízes foi quantificada pelo Índice de Validade de Conteúdo. O pré-teste foi realizado em duas etapas (n1 e n2 = 15). A confiabilidade foi avaliada por meio do teste re-teste (intervalo de 7-15 dias, n = 50). RESULTADOS: Na avaliação das equivalências semântico-idiomática e cultural, os itens com Índice de Validade de Conteúdo < 1 foram revisados até obtenção de consenso entre os juízes. Constatou-se 100% de concordância do segundo comitê na análise da equivalência metabólica entre as atividades originais e as substituídas. Análise do teste re-teste apontou coeficiente de concordância kappa (k = 0,86; p < 0,001), sugerindo estabilidade temporal do instrumento. CONCLUSÕES: A versão validada do Veterans Specific Activity Questionnaire apresentou evidências de confiabilidade segundo critério de estabilidade temporal e conteúdo cultural adequado.

Aplicação para gestão de activos de rede do Aeroporto do Porto

O presente trabalho enquadra-se na área das redes de computadores, fazendo referência aos protocolos e ao conjunto de equipamentos e softwares necessários para a administração, controlo e monitorização desse tipos de infra-estruturas. Para a gestão de uma rede de dados, é essencial dispor de conhecimentos e documentação de nível técnico para representar da forma mais fiel possível a configuração da rede, seguindo passo a passo a interligação entre os equipamentos existentes e oferecendo assim uma visão o mais fidedigna possível das instalações. O protocolo SNMP é utilizado em larga escala sendo praticamente um standard para a administração de redes baseadas na tecnologia TCP/IP. Este protocolo define a comunicação entre um administrador e um agente, estabelecendo o formato e o significado das mensagens trocadas entre ambos. Tem a capacidade de suportar produtos de diferentes fabricantes, permitindo ao administrador manter uma base de dados com informações relevantes da monitorização de vários equipamentos, que pode ser consultada e analisada por softwares NMS concebidos especialmente para a gestão de redes de computadores. O trabalho apresentado nesta dissertação teve como objectivo desenvolver uma ferramenta para apoiar à gestão da infra-estrutura de comunicações do Aeroporto Francisco Sá Carneiro que permitisse conhecer em tempo real o estado dos elementos de rede, ajudar no diagnóstico de possíveis problemas e ainda apoiar a tarefa de planeamento e expansão da rede instalada. A ferramenta desenvolvida utiliza as potencialidades do protocolo SNMP para adquirir dados de monitorização de equipamentos de rede presentes na rede do AFSC, disponibilizando-os numa interface gráfica para facilitar a visualização dos parâmetros e alertas de funcionamento mais importantes na administração da rede.

Use of negative information in positioning and tracking algorithms

To avoid additional hardware deployment, indoor localization systems have to be designed in such a way that they rely on existing infrastructure only. Besides the processing of measurements between nodes, localization procedure can include the information of all available environment information. In order to enhance the performance of Wi-Fi based localization systems, the innovative solution presented in this paper considers also the negative information. An indoor tracking method inspired by Kalman filtering is also proposed.

Concurrent tabling

In the past few years Tabling has emerged as a powerful logic programming model. The integration of concurrent features into the implementation of Tabling systems is demanded by need to use recently developed tabling applications within distributed systems, where a process has to respond concurrently to several requests. The support for sharing of tables among the concurrent threads of a Tabling process is a desirable feature, to allow one of Tabling’s virtues, the re-use of computations by other threads and to allow efficient usage of available memory. However, the incremental completion of tables which are evaluated concurrently is not a trivial problem. In this dissertation we describe the integration of concurrency mechanisms, by the way of multi-threading, in a state of the art Tabling and Prolog system, XSB. We begin by reviewing the main concepts for a formal description of tabled computations, called SLG resolution and for the implementation of Tabling under the SLG-WAM, the abstract machine supported by XSB. We describe the different scheduling strategies provided by XSB and introduce some new properties of local scheduling, a scheduling strategy for SLG resolution. We proceed to describe our implementation work by describing the process of integrating multi-threading in a Prolog system supporting Tabling, without addressing the problem of shared tables. We describe the trade-offs and implementation decisions involved. We then describe an optimistic algorithm for the concurrent sharing of completed tables, Shared Completed Tables, which allows the sharing of tables without incurring in deadlocks, under local scheduling. This method relies on the execution properties of local scheduling and includes full support for negation. We provide a theoretical framework and discuss the implementation’s correctness and complexity. After that, we describe amethod for the sharing of tables among threads that allows parallelism in the computation of inter-dependent subgoals, which we name Concurrent Completion. We informally argue for the correctness of Concurrent Completion. We give detailed performance measurements of the multi-threaded XSB systems over a variety of machines and operating systems, for both the Shared Completed Tables and the Concurrent Completion implementations. We focus our measurements inthe overhead over the sequential engine and the scalability of the system. We finish with a comparison of XSB with other multi-threaded Prolog systems and we compare our approach to concurrent tabling with parallel and distributed methods for the evaluation of tabling. Finally, we identify future research directions.

Synthesis of Sub-5 NM Co-Doped SnO2 nanoparticles and their structural microstructural, optical and photocatalytic properties

A swift chemical route to synthesize Co-doped SnO2 nanopowders is described. Pure and highly stable Sn1-xCoxO2-delta (0 <= x <= 0.15) crystalline nanoparticles were synthesized, with mean grain sizes <5 nm and the dopant element homogeneously distributed in the SnO2 matrix. The UV-visible diffuse reflectance spectra of the Sn1-xCoxO2-delta samples reveal red shifts, the optical bandgap energies decreasing with increasing Co concentration. The samples' Urbach energies were calculated and correlated with their bandgap energies. The photocatalytic activity of the Sn1-xCoxO2-delta samples was investigated for the 4-hydroxylbenzoic acid (4-HBA) degradation process. A complete photodegradation of a 10 ppm 4-HBA solution was achieved using 0.02% (w/w) of Sn0.95Co0.05O2-delta nanoparticles in 60 min of irradiation. (C) 2014 Elsevier B.V. All rights reserved.

Derivation methods for hybrid knowledge bases with rules and ontologies

Trabalho apresentado no âmbito do Mestrado em Engenharia Informática, como requisito parcial para obtenção do grau de Mestre em Engenharia Informática

Influence of the Sodium/Proton replacement on the structural, morphological and photocatalytic properties of titanate nanotubes

Titanate nanotubes (TNT) with different sodium contents have been synthesised using a hydrothermal approach and a swift and highly controllable post-washing processes. The influence of the sodium/proton replacement on the structural and morphological characteristics of the prepared materials was analysed. Different optical behaviour was observed depending on the Na+/H+ samples’ content. A band gap energy of 3.27±0.03 eV was estimated for the material with higher sodium content while a value of 2.81±0.02 eV was inferred for the most protonated material, which therefore exhibits an absorption edge in the near visible region. The point of zero charge of the materials was determined and the influence of the sodium content on the adsorption of both cationic and anionic organic dyes was studied. The photocatalytic performance of the TNT samples was evaluated in the rhodamine 6G degradation process. Best photodegradation results were obtained when using the most protonated material as catalyst, although this material has shown the lowest R6G adsorption capability.

Synthesis of titanate nanostructures using amorphous precursor material and their adsorption/photocatalytic properties

This article reports on a new and swift hydrothermal chemical route to prepare titanate nanostructures (TNS) avoiding the use of crystalline TiO2 as starting material. The synthesis approach uses a commercial solution of TiCl3 as titanium source to prepare an amorphous precursor, circumventing the use of hazardous chemical compounds. The influence of the reaction temperature and dwell autoclave time on the structure and morphology of the synthesised materials was studied. Homogeneous titanate nanotubes with a high length/diameter aspect ratio were synthesised at 160 degrees C and 24 h. A band gap of 3.06 +/- 0.03 eV was determined for the TNS samples prepared in these experimental conditions. This value is red shifted by 0.14 eV compared to the band gap value usually reported for the TiO2 anatase. Moreover, such samples show better adsorption capacity and photocatalytic performance on the dye rhodamine 6G (R6G) photodegradation process than TiO2 nanoparticles. A 98% reduction of the R6G concentration was achieved after 45 min of irradiation of a 10 ppm dye aqueous solution and 1 g L-1 of TNS catalyst.

Automatic sleep apnea detection and sleep classification using the ECG and the SpO2 signals

Dissertation for a Masters Degree in Computer and Electronic Engineering