Valorization of eucalyptus wood by glycerol-organosolv pretreatment within the biorefinery concept: an integrated and intensified approach

The efficient utilization of lignocellulosic biomass and the reduction of production cost are mandatory to attain a cost-effective lignocellulose-to-ethanol process. The selection of suitable pretreatment that allows an effective fractionation of biomass and the use of pretreated material at high-solid loadings on saccharification and fermentation (SSF) processes are considered promising strategies for that purpose. Eucalyptus globulus wood was fractionated by organosolv process at 200 C for 69 min using 56% of glycerol-water. A 99% of cellulose remained in pretreated biomass and 65% of lignin was solubilized. Precipitated lignin was characterized for chemical composition and thermal behavior, showing similar features to commercial lignin. In order to produce lignocellulosic ethanol at high-gravity, a full factory design was carried to assess the liquid to solid ratio (3e9 g/g) and enzyme to solid ratio (8e16 FPU/g) on SSF of delignified Eucalyptus. High ethanol concentration (94 g/L) corresponding to 77% of conversion at 16FPU/g and LSR ¼ 3 g/g using an industrial and thermotolerant Saccharomyces cerevisiae strain was successfully produced from pretreated biomass. Process integration of a suitable pretreatment, which allows for whole biomass valorization, with intensified saccharification-fermentation stages was shown to be feasible strategy for the co-production of high ethanol titers, oligosaccharides and lignin paving the way for cost-effective Eucalyptus biorefinery.

Exploitation of Ashbya gossypii for the production of high-value products from glycerol feedstocks

Dissertação de mestrado em Bioengenharia

Investigation into the potential for establishing a self-sustainable wetland ecosystem over pyritic mine tailings

Research was conducted to investigate the potential for ecologically engineering a sustainable wetland ecosystem over pyritic mine tailings to prevent the generation of acid mine drainage. Ecological engineering is technology with the primary goal being the creation of self-sustainable ecological systems. Work involved the design and construction of a pilot-scale wetland system comprising three wetland cells, each covering 100 m2. Approximately forty tonnes of pyritic mine tailings were deposited on the base of the first cell above a synthetic liner, covered with peat, flooded and planted with emergent wetland macrophytes Typha latifolia, Phragmites australis, and Juncus effusus. The second cell was constructed as a conventional free water surface wetland, planted identically, and used as a reference wetland/experimental control. Wetland monitoring to determine long-term sustainability focused on indicators of ecosystem health including ecological, hydrological, physico-chemical, geochemical, and biotic metrics. An integrated assessment was conducted that involved field ecology in addition to ecological risk assessment. The objective of the field ecology study was to use vegetative parameters as ecological indicators for documenting wetlands success or degradation. The goal of the risk assessment was to determine if heavy-metal contamination of the wetland sediments occurred through metal mobilisation from the underlying tailings, and to evaluate if subsequent water column chemistry and biotic metal concentrations were significantly correlated with adverse wetland ecosystem impacts. Data were used to assess heavy metal bioavailability within the system as a function of metal speciation in the wetland sediments. Results indicate hydrology is the most important variable in the design and establishment of the tailings wetland and suggest a wetland cover is an ecologically viable alternative for pyritic tailings which are feasible to flood. Ecological data indicate that in terms of species richness and diversity, the tailings-wetland was exhibiting the ecological characteristics of natural wetlands within two years. Ata indicate that pH and conductivity in the tailings-wetland were not adversely impacted by the acid-generating potential or sulphate concentration of the tailings substrate and its porewater. Similarly, no enhanced seasonal impacts from sulphate or metals in the water column, nor adverse impacts on the final water quality of the outflows, were detected. Mean total metal concentrations in the sediments of the tailings-wetland indicate no significant adverse mobilisation of metals into the peat substrate from the tailings. Correlation analyses indicate a general increase in sediment metal concentration in this wetland with increasing water depth and pH, and a corresponding decrease in the metal concentrations of the water column. Sediment extractions also showed enrichment of Cd, Fe, Pb and Zn in the oxidisable fraction (including sulphides and organic matter) of the tailings-wetland sediments. These data suggest that adsorption and coprecipitation of metals is occurring from the water column of the tailings wetland with organic material at increasing depths under reducing conditions. The long-term control of metal bioavailability in the tailings wetland will likely be related to the presence and continual build-up of organic carbon binding sites in the developing wetland above the tailings. Metal speciation including free-metal ion concentration and the impact of physico-chemical parameters particularly pH and organic matter, were investigated to assess ecotoxicological risk. Results indicate that potentially bioavailable metals (the sum of the exchangeable and reducible fractions) within the tailings wetland are similar to values cited for natural wetlands. Estimated free-metal ion concentrations calculated from geochemical regression models indicate lower free-metal ion concentrations of Cd in the tailings wetland than natural wetlands and slightly higher free-metal ion concentrations of Pb and Zn. Increased concentrations of metals in roots, rhizomes and stems of emergent macrophytes did not occur in the tailings wetland. Even though a substantial number of Typha latifolia plants were found rooting directly into tailings, elevated metals were not found in these plant tissues. Phragmites also did not exhibit elevated metal concentrations in any plant tissues. Typha and Phragmites populations appear to be exhibiting metal-tolerant behaviour. The chemistry of the water column and sediments in Silvermines wetland were also investigated and were much more indicative of a wetland system impacted by heavy metal contamination than the tailings-wetland. Mean Dc, Fe, Mn, Pb and Zn concentrations in the water column and sediments of Silvermines wetlands were substantially higher than in the pilot wetlands and closely approximate concentrations in these matrices contaminated with metals from mining. In addition, mean sulphate concentration in Silvermines wetland was substantially higher and is closer to sulphate concentrations in waters associated with mining. Potentially bioavailable metals were substantially elevated in Silvermines wetland in comparison to the pilot wetlands and higher than those calculated for natural rive sediments. However, Fe oxy-hydroxide concentrations in Silvermines sediments are also much higher than in the pilot wetlands and this significantly impacts the concentration of free-metal ions in the sediment porewater. The free-metal ion concentrations for Pb and Zn indicate that Silvermines wetland is retaining metals and acting as a treatment wetland for drainage emanating from Silvermines tailings dam.

Methode und Anwendungen einer wissensorientierten Fabrikmodellierung

Factory planning, Factory modeling, Semantic Knowledge Representation, Digital Factory Planning, Digital Factory

Notas sôbre o gênero Colobogaster Solier, 1833, com a descrição de duas novas espécies da Região Amazônica: (Coleoptera, Buprestidae)

The study of materials belonging to several brazilian collections led us discover 2 new species of the genus Colobogaster which are here described. C. seabrai sp. n. seems to be related to C. puncticollis Waterhouse, 1882, from which it can be distinguished by: a) apical alitral tooth placed suturally, b) pronotum with 3 pairs of depressions, the 1st. pair transversal and conigous to the 2nd one, c) elitral suture brilliantgreen coloured but not the marginal edge, d) front without a horse-shoe shaped structure, e) pronotum with the discal region concolor. The structures of pronotum, the elitral and pronotal colour paterns and the genial morphology separate this one from other species of the genus. C. paraensis sp. n. is closely related to C. cupricollis Kerremans, 1897, but it is distinguished by the absence of depressions on the pronotum, by the elitral tooth placed suturally, by the abscence of humeral rip and by the general colour. Eleven other species were studied and their apical segment of the abdomen and scutellum were illustrated. It was also established the synonymy of C. ecuadoricus Obengerger, 1926.

Gestión de productos de una empresa dedicada a la moda

Aquesta memòria ha estat realitzada per donar a conèixer el project que du per títol "Gestió de productes d'una empresa dedicada a la moda". Aquesta aplicació intentarà introduir en el mercat una solució per a les petites empreses que volen fer-se un lloc en el món de la moda i que necessiten un programari per poder gestionar les seves botigues. En aquest sector existeixen petits empresaris que van començar realitzant les peces de roba a les seves fàbriques i que han decidit fer petites col·leccions i posar-les a la venda al detall, a les seves propies franquícies. Aquesta aplicació mostra un mòdul d'un projecte molt més gran. El mòdul s'encarrega de la gestió dels articles creats a fàbrica, per poder distribuir-los entre les botigues. Un possible segon mòdul es dedicaria a la gestió de les vendes a les botigues.

Allergic asthma to thaumatin : case report

Background: Thaumatin is a protein originally isolated from an African fruit (the "katemfe"), but various thaumatin-like proteins have been found in apples, grapes, kiwis and olives, etc. Thaumatin has natural sweetening properties and is about 2000 to 3000 times more potent than sucrose. It is therefore used in the food industry, particularly in the processing of low-calories sweeteners. Recently, thaumatin-like proteins have been described as a new family of allergens. Methods: We report the case of a 44-year-old woman occupationally exposed to thaumatin, who developed an allergy to it. The first symptom was an urticaria, which she presented two years after the factory she was working in (a sweeteners manufacturer), started to use thaumatin. Later on, she perceived an acute episode of a sensation of lump in the throat, persisting mild dyspnea, dysphonia and cough. Despite normal peak flow values and a normal chest examination, her general practitioner treated her with local corticoids and systemic antihistaminic drugs, which improved the symptoms. As occupational physicians, we were asked about the likelihood of an occupational disease. We visited her working place, and assessed the exposure to thaumatin. We concluded that the probability for a delayed asthma related to a thaumatin exposure was high, despite the lack of an exposure test. Results: The case was submitted to the insurance company as an occupational disease, and was accepted as such. It was therefore decided not to perform the exposure test, given the absence of true benefit for the patient, who was advised to switch job, and to avoid any exposure to thaumatin in the future. A few months later, the symptoms had completely disappeared. Conclusion: Some molecules only used in specific industry sectors, can cause health problems, such as allergy, but also toxic impairments, etc. The occupational physician, trained to find out which products and identify which molecules are involved, can contribute to the diagnosis, and help make possible a safe return to work for the patient.

Les symbioses agro-industrielles en Afrique de l'Ouest : évaluation du potentiel d'une nouvelle stratégie pour un développement durable

RésuméCette thèse traite de l'utilisation des concepts de Symbiose Industrielle dans les pays en développement et étudie le potentiel de cette stratégie pour stimuler un développement régional durable dans les zones rurales d'Afrique de l'Ouest. En particulier, lorsqu'une Symbiose Industrielle est instaurée entre une usine et sa population alentour, des outils d'évaluation sont nécessaires pour garantir que le projet permette d'atteindre un réel développement durable. Les outils existants, développés dans les pays industrialisés, ne sont cependant pas complètement adaptés pour l'évaluation de projets dans les pays en développement. En effet, les outils sont porteurs d'hypothèses implicites propres au contexte socio-économique dans lequel ils ont été conçus.L'objectif de cette thèse est de développer un cadre méthodologique pour l'évaluation de la durabilité de projets de Symbiose Industrielle dans les pays en développement.Pour ce faire, je m'appuie sur une étude de cas de la mise en place d'une Symbiose Industrielle au nord du Nigéria, à laquelle j'ai participé en tant qu'observatrice dès 2007. AshakaCem, une usine productrice de ciment du groupe Lafarge, doit faire face à de nombreuses tensions avec la population rurale alentour. L'entreprise a donc décidé d'adopter une nouvelle méthode inspirée des concepts de Symbiose Industrielle. Le projet consiste à remplacer jusqu'à 10% du carburant fossile utilisé pour la cuisson de la matière crue (calcaire et additifs) par de la biomasse produite par les paysans locaux. Pour ne pas compromettre la fragile sécurité alimentaire régionale, des techniques de lutte contre l'érosion et de fertilisation naturelle des sols sont enseignées aux paysans, qui peuvent ainsi utiliser la culture de biomasse pour améliorer leurs cultures vivrières. A travers cette Symbiose Industrielle, l'entreprise poursuit des objectifs sociaux (poser les bases nécessaires à un développement régional), mais également environnementaux (réduire ses émissions de CO2 globales) et économiques (réduire ses coûts énergétiques). Elle s'ancre ainsi dans une perspective de développement durable qui est conditionnelle à la réalisation du projet.A travers l'observation de cette Symbiose et par la connaissance des outils existants je constate qu'une évaluation de la durabilité de projets dans les pays en développement nécessite l'utilisation de critères d'évaluation propres à chaque projet. En effet, dans ce contexte, l'emploi de critères génériques apporte une évaluation trop éloignée des besoins et de la réalité locale. C'est pourquoi, en m'inspirant des outils internationalement reconnus comme l'Analyse du Cycle de Vie ou la Global Reporting Initiative, je définis dans cette thèse un cadre méthodologique qui peut, lui, être identique pour tous les projets. Cette stratégie suit six étapes, qui se réalisent de manière itérative pour permettre une auto¬amélioration de la méthodologie d'évaluation et du projet lui-même. Au cours de ces étapes, les besoins et objectifs en termes sociaux, économiques et environnementaux des différents acteurs sont déterminés, puis regroupés, hiérarchisés et formulés sous forme de critères à évaluer. Des indicateurs quantitatifs ou qualitatifs sont ensuite définis pour chacun de ces critères. Une des spécificités de cette stratégie est de définir une échelle d'évaluation en cinq graduations, identique pour chaque indicateur, témoignant d'un objectif totalement atteint (++) ou pas du tout atteint (--).L'application de ce cadre méthodologique à la Symbiose nigériane a permis de déterminer quatre critères économiques, quatre critères socio-économiques et six critères environnementaux à évaluer. Pour les caractériser, 22 indicateurs ont été définis. L'évaluation de ces indicateurs a permis de montrer que le projet élaboré atteint les objectifs de durabilité fixés pour la majorité des critères. Quatre indicateurs ont un résultat neutre (0), et un cinquième montre qu'un critère n'est pas atteint (--). Ces résultats s'expliquent par le fait que le projet n'en est encore qu'à sa phase pilote et n'a donc pas encore atteint la taille et la diffusion optimales. Un suivi sur plusieurs années permettra de garantir que ces manques seront comblés.Le cadre méthodologique que j'ai développé dans cette thèse est un outil d'évaluation participatif qui pourra être utilisé dans un contexte plus large que celui des pays en développement. Son caractère générique en fait un très bon outil pour la définition de critères et indicateurs de suivi de projet en terme de développement durable.SummaryThis thesis examines the use of industrial symbiosis in developing countries and studies its potential to stimulate sustainable regional development in rural areas across Western Africa. In particular, when industrial symbiosis is instituted between a factory and the surrounding population, evaluation tools are required to ensure the project achieves truly sustainable development. Existing tools developed in industrialized countries are not entirely suited to assessing projects in developing countries. Indeed, the implicit hypotheses behind such tools reflect the socioeconomic context in which they were designed. The goal of this thesis is to develop a methodological framework for evaluating the sustainability of industrial symbiosis projects in developing countries.To accomplish this, I followed a case study about the implementation of industrial symbiosis in northern Nigeria by participating as an observer since 2007. AshakaCem, a cement works of Lafarge group, must confront many issues associated with violence committed by the local rural population. Thus, the company decided to adopt a new approach inspired by the concepts of industrial symbiosis.The project involves replacing up to 10% of the fossil fuel used to heat limestone with biomass produced by local farmers. To avoid jeopardizing the fragile security of regional food supplies, farmers are taught ways to combat erosion and naturally fertilize the soil. They can then use biomass cultivation to improve their subsistence crops. Through this industrial symbiosis, AshakaCem follows social objectives (to lay the necessary foundations for regional development), but also environmental ones (to reduce its overall CO2 emissions) and economical ones (to reduce its energy costs). The company is firmly rooted in a view of sustainable development that is conditional upon the project's execution.By observing this symbiosis and by being familiar with existing tools, I note that assessing the sustainability of projects in developing countries requires using evaluation criteria that are specific to each project. Indeed, using generic criteria results in an assessment that is too far removed from what is needed and from the local reality. Thus, by drawing inspiration from such internationally known tools as Life Cycle Analysis and the Global Reporting Initiative, I define a generic methodological framework for the participative establishment of an evaluation methodology specific to each project.The strategy follows six phases that are fulfilled iteratively so as to improve the evaluation methodology and the project itself as it moves forward. During these phases, the social, economic, and environmental needs and objectives of the stakeholders are identified, grouped, ranked, and expressed as criteria for evaluation. Quantitative or qualitative indicators are then defined for each of these criteria. One of the characteristics of this strategy is to define a five-point evaluation scale, the same for each indicator, to reflect a goal that was completely reached (++) or not reached at all (--).Applying the methodological framework to the Nigerian symbiosis yielded four economic criteria, four socioeconomic criteria, and six environmental criteria to assess. A total of 22 indicators were defined to characterize the criteria. Evaluating these indicators made it possible to show that the project meets the sustainability goals set for the majority of criteria. Four indicators had a neutral result (0); a fifth showed that one criterion had not been met (--). These results can be explained by the fact that the project is still only in its pilot phase and, therefore, still has not reached its optimum size and scope. Following up over several years will make it possible to ensure these gaps will be filled.The methodological framework presented in this thesis is a highly effective tool that can be used in a broader context than developing countries. Its generic nature makes it a very good tool for defining criteria and follow-up indicators for sustainable development.

Foot worn inertial sensors for gait assessment and rehabilitation based on motorized shoes.

Fall prevention in elderly subjects is often based on training and rehabilitation programs that include mostly traditional balance and strength exercises. By applying such conventional interventions to improve gait performance and decrease fall risk, some important factors are neglected such as the dynamics of the gait and the motor learning processes. The EU project "Self Mobility Improvement in the eLderly by counteractING falls" (SMILING project) aimed to improve age-related gait and balance performance by using unpredicted external perturbations during walking through motorized shoes that change insole inclination at each stance. This paper describes the shoe-worn inertial module and the gait analysis method needed to control in real-time the shoe insole inclination during training, as well as gait spatio-temporal parameters obtained during long distance walking before and after the 8-week training program that assessed the efficacy of training with these motorized shoes.

Four new species of Oswaldocruzia (Nematoda: Trichostrongylina, Molineoidea) Parasitizing amphibians and lizards from Ecuador

Description of four new species of Oswaldocruzia parasitizing Iguanidae and Leptodactylidae from Ecuador, demonstrate that they are morphologically close to each other. Like most of the other neotropical and holarctic Oswaldocruzia , they are characterized by spicules with three main branches: blade, shoe and fork; the division of the fork within the distal third of the spicule length appears to be characteristic of the neotropical species. - Oswaldocruzia bainae n. sp. parasitizing Anolis chrysolepis and Anolis fuscoauratus possesses a synlophe visible only on transversal sections of the body. It is composed of rounded and not pointed ridges. - Oswaldocruzia tcheprakovae n. sp. parasitizing Eleutherodactylus altamazonicus is closely related to O. bainae , but the synlophe is present only in the anterior and posterior extremities of the body. - Oswaldocruzia cassonei n. sp. parasitizing Eleutherodactylus lanthanites is closely related to O. taranchoni, Ben Slimane and Durette-Desset, 1995, a parasite of Bufo marinus from Brazil. It is differentiated by the synlophe and the measurements. - Oswaldocruzia petterae n. sp. parasitizing Leptodactylus pentadactylus is closely related to O. chambrieri, Ben Slimane and Durette-Desset, 1993, parasitizing Bufo and Eleutherodactylus in the same region. It is differentiated since, for an equivalent length of the body, the ridges are almost two times fewer and the spicules smaller.

Plantar pressures in the tennis serve.

In-shoe loading patterns were examined in each foot (back and front) separately during two types of tennis serve [first (or flat) and second (or twist) serve] and two service stance styles [foot-up (back foot is moved forward next to front foot for push-off) and foot-back (feet remain at the same relative level)]. Ten competitive tennis players completed five trials for each type of serve and service stance style in random order. Plantar pressure distribution was recorded using Pedar insoles divided into nine areas for analysis. Mean and peak pressures (+15.2%, P < 0.01 and +12.8%, P < 0.05) as well as maximal forces (+20.2%, P < 0.01) were higher under the lateral forefoot of the front foot in first than in second serves, while mean forces were higher (+17.2%, P < 0.05) under the lesser toes. Relative load was higher on the lateral forefoot (+20.4%, P < 0.05) but lower (-32.5%, P < 0.05) on the medial heel of the front foot with foot-up compared with foot-back stance. Using a foot-up stance, loading of the back foot was higher (+31.8%, P < 0.01) under the lateral mid-foot but lower (-29.9%, P < 0.01) under the medial forefoot. The type of serve and the stance style adopted have a significant effect on foot loading. Such findings might help improve mechanical efficiency of the serve.

ElevationSys

ElevationSys es un sistema de gestión web para el proceso de producción de una empresa de ascensores. El sistema contiene diferentes tipos de usuarios de los departamentos de la empresa y esta administrado por unos flujos con relación de dependencia que van marcando el ritmo del trabajo. Este backOffice está pensado para abarcar todo el procedimiento de la fábrica, desde que se presenta la oferta al cliente hasta que se entrega la máquina.

Gestió d'un magatzem de fruits secs

Estudi i disseny de la implantació d'un ERP (Enterprise Resource Planning) en una fàbrica de fruits secs.

GMODI : Gestión y mantenimiento Online de departamentos informáticos

La finalitat d'aquest projecte és la d'aconseguir d'una banda la gestió de recanvis per als equips informàtics de l'empresa tals com, tonners d'impressores làser i faxos, cartutxos de tinta, escàners i terminals de fàbrica i finalment impressores d'impressió tèrmica per a etiquetes dels productes de la nostra fàbrica. Per l'altre costat tindrem el manteniment dels equips informàtics de l'empresa, és dir els PC's de feina.

Creació d'un sistema d'informació geogràfica de carreteres : Problema logístic de l'empresa Vall Companys Grup

En la logística de Vall Companys Grup, un problema fonamental a resoldre és el de la situació geogràfica de tots els elements que participen en la logística, com són fàbriques, granges, camions i magatzems; i estudiar les seves interrelacions per aconseguir un aprofitament òptim dels recursos disponibles. Per resoldre aquest problema, l'eina adequada seria un Sistema d'Informació Geogràfica (SIG).