A 5 million year reconstruction of sea level, temperature, and sea water d18O

Marine sediment records from the Oligocene and Miocene reveal clear 400,000-year (400-kyr) climate cycles related to variations in orbital eccentricity. These cycles are also observed in the Plio-Pleistocene records of the global carbon cycle. However they are absent in the Late Pleistocene ice-age record over the past 1.5 million years. Here, we present a simulation of global ice volume over the past 5 million years with a coupled system of four 3-D ice-sheet models. Our simulation shows that the 400-kyr long eccentricity cycles of Antarctica vary coherently with d13C records during the Pleistocene suggesting that they drive the long-term carbon cycle changes throughout the past 35 million years. The 400-kyr response of Antarctica is eventually suppressed by the dominant 100-kyr glacial cycles of the large ice sheets in the Northern Hemisphere (NH).

Verfahren zur Durchsatz-maximierenden Lagerordnung auf Grundlage unsicherer Zugriffshäufigkeitsprognosen

Im Zusammenhang mit der Entwicklung einer neuen Betriebsstrategie zur Erzeugung einer Durchsatz-maximierenden Lagerordnung werden neue Herausforderungen des Strategiedesigns in Form von Echtzeitanfoderungen, Korrelationen-abbildende Prognosenwertemodelle und ungewissen Auftragsfolgen thematisiert. Die Effektivität der neuen Betriebsstrategie wird im Rahmen eines Simulationsexperiments getestet.

Sistema servomotorizado de endireitamento de chapa em banda

O presente trabalho propõe um conjunto de programas para a validação, em fase de projecto, de endireitadores automáticos. O trabalho é composto por vários capítulos onde são abordados aspectos teóricos sobre o comportamento elásto plástico do endireitamento de uma chapa provenientes de bobinas de chapa metalica, bem como as considerações e simplificações utilizadas na elaboração dos programas. Contem ainda uma parte onde são apresentados os programas e são reveladas algumas experiencias realizadas com os mesmos.

Building Information Modeling (BIM)

Los procesos de diseño y construcción tradicionales de la industria de la construcción que se han conservado inalterados durante años, han impedido vislumbrar los impactos positivos que se pueden dar al trabajar en conjunto con las tecnologías de información -- El miedo al cambio hace que las empresas del sector denominen “normal” a la fragmentación del proceso constructivo, y presupuesten desde el inicio de la obra atrasos por incompatibilidades en los diseños causados principalmente por la falta de comunicación y coordinación entre los diferentes participantes del proyecto -- La implementación de tecnologías de información busca no sólo ayudar como una herramienta a los diseños del proyecto, sino que también ofrece elementos para integrar a los participantes y contratistas del proyecto en un equipo de trabajo donde exista mayor interoperabilidad entre las áreas implicadas en el planteamiento, diseño y ejecución del proyecto, y se pueda disminuir de sobremanera la fragmentación que vuelve tan poco competitiva esta industria a nivel mundial -- En el presente trabajo de grado se realizó un estado del arte de la tecnología de información BIM con el fin de sintetizar las enormes cantidades de información disponibles y de posibilitar una mejor comprensión de este -- Con la teoría y los manuales estudiados a profundidad de los software que componen esta tecnología, se procedió a desarrollar un ejercicio exploratorio confrontando los conocimientos adquiridos teóricos con la parte práctica, parte en donde se pudieron vislumbrar las ventajas y desventajas al implementar este software en la industria de la construcción de nuestro país -- Finalmente se exponen los requerimientos y limitaciones que trae consigo la aplicación de esta tecnología a los proyectos de construcción

Guiding Monte Carlo tree searches with neural networks in the game of go

A dissertation submitted in fulfillment of the requirements to the degree of Master in Computer Science and Computer Engineering

Medidas de concentração de radônio proveniente de argamassas de cimento portland, gesso e fosfogesso

Portland cement being very common construction material has in its composition the natural gypsum. To decrease the costs of manufacturing, the cement industry is substituting the gypsum in its composition by small quantities of phosphogypsum, which is the residue generated by the production of fertilizers and consists essentially of calcium dihydrate and some impurities, such as fluoride, metals in general, and radionuclides. Currently, tons of phosphogypsum are stored in the open air near the fertilizer industries, causing contamination of the environment. The 226 Ra present in these materials, when undergoes radioactive decay, produces the 222Rn gas. This radioactive gas, when inhaled together with its decay products deposited in the lungs, produces the exposure to radiation and can be a potential cause of lung cancer. Thus, the objective of this study was to measure the concentration levels of 222Rn from cylindrical samples of Portland cement, gypsum and phosphogypsum mortar from the state of Paraná, as well as characterizer the material and estimate the radon concentration in an environment of hypothetical dwelling with walls covered by such materials. Experimental setup of 222Rn activity measurements was based on AlphaGUARD detector (Saphymo GmbH). The qualitative and quantitative analysis was performed by gamma spectrometry and EDXRF with Au and Ag targets tubes (AMPTEK), and Mo target (ARTAX) and mechanical testing with x- ray equipment (Gilardoni) and the mechanical press (EMIC). Obtained average values of radon activity from studied materials in the air of containers were of 854 ± 23 Bq/m3, 60,0 ± 7,2 Bq/m3 e 52,9 ± 5,4 Bq/m3 for Portland cement, gypsum and phosphogypsum mortar, respectively. These results extrapolated into the volume of hypothetical dwelling of 36 m3 with the walls covered by such materials were of 3366 ± 91 Bq/m3, 237 ± 28 Bq/m3 e 208 ± 21 Bq/m3for Portland cement, gypsum and phosphogypsum mortar, respectively. Considering the limit of 300 Bq/m3 established by the ICRP, it could be concluded that the use of Portland cement plaster in dwellings is not secure and requires some specific mitigation procedure. Using the results of gamma spectrometry there were calculated the values of radium equivalent activity concentrations (Raeq) for Portland cement, gypsum and phosphogypsum mortar, which were obtained equal to 78,2 ± 0,9 Bq/kg; 58,2 ± 0,9 Bq/kg e 68,2 ± 0,9 Bq/kg, respectively. All values of radium equivalent activity concentrations for studied samples are below the maximum level of 370 Bq/kg. The qualitative and quantitative analysis of EDXRF spectra obtained with studied mortar samples allowed to evaluate quantitate and the elements that constitute the material such as Ca, S, Fe, and others.

Método para reconhecimento de vogais e extração de parâmetros acústicos para analises forenses

Forensic speaker comparison exams have complex characteristics, demanding a long time for manual analysis. A method for automatic recognition of vowels, providing feature extraction for acoustic analysis is proposed, aiming to contribute as a support tool in these exams. The proposal is based in formant measurements by LPC (Linear Predictive Coding), selectively by fundamental frequency detection, zero crossing rate, bandwidth and continuity, with the clustering being done by the k-means method. Experiments using samples from three different databases have shown promising results, in which the regions corresponding to five of the Brasilian Portuguese vowels were successfully located, providing visualization of a speaker’s vocal tract behavior, as well as the detection of segments corresponding to target vowels.

Air Entrainment in the Turbulent Ship Hull Boundary Layer

Turbulent fluctuations in the vicinity of the water free surface along a flat, vertically oriented surface-piercing plate are studied experimentally using a laboratory-scale experiment. In this experiment, a meter-wide stainless steel belt travels horizontally in a loop around two rollers with vertically oriented axes, which are separated by 7.5 meters. This belt device is mounted inside a large water tank with the water level set just below the top edge of the belt. The belt, rollers, and supporting frame are contained within a sheet metal box to keep the device dry except for one 6-meter-long straight test section between rollers. The belt is launched from rest with an acceleration of up to 3-g in order to quickly reach steady state velocity. This creates a temporally evolving boundary layer analogous to the spatially evolving boundary layer created along a flat-sided ship moving at the same velocity, with a length equivalent to the length of belt that has passed the measurement region since the belt motion began. Surface profile measurements in planes normal to the belt surface are conducted using cinematic Laser Induced Fluorescence and quantitative surface profiles are extracted at each instant in time. Using these measurements, free surface fluctuations are examined and the propagation behavior of these free surface ripples is studied. It is found that free surface fluctuations are generated in a region close to the belt surface, where sub-surface velocity fluctuations influence the behavior of these free surface features. These rapidly-changing surface features close to the belt appear to lead to the generation of freely-propagating waves far from the belt, outside the influence of the boundary layer. Sub-surface PIV measurements are performed in order to study the modification of the boundary layer flow field due to the effects of the water free surface. Cinematic planar PIV measurements are performed in horizontal planes parallel to the free surface by imaging the flow from underneath the tank, providing streamwise and wall-normal velocity fields. Additional planar PIV experiments are performed in vertical planes parallel to the belt surface in order to study the bahvior of streamwise and vertical velocity fields. It is found that the boundary layer grows rapidly near the free surface, leading to an overall thicker boundary layer close to the surface. This rapid boundary layer growth appears to be linked to a process of free surface bursting, the sudden onset of free surface fluctuations. Cinematic white light movies are recorded from beneath the water surface in order to determine the onset location of air entrainment. In addition, qualitative observations of these processes are made in order to determine the mechanisms leading to air entrainment present in this flow.

Diseño de una estrategia de inversión para acciones del mercado bursátil Dow Jones

En este trabajo se desarrolla una estrategia de inversión para acciones del índice bursátil Dow Jones, que permite obtener una rentabilidad superior a la del índice en un período de tiempo de cinco años -- Se comienza analizando cada compañía de manera individual, mediante una valoración por flujos de caja libre descontados -- Luego se analizan sus indicadores financieros trimestrales y se calculan diversas valoraciones para cada compañía utilizando múltiplos financieros y bursátiles -- Finalmente, se establece una estrategia con 11 factores que pueden ser combinados entre sí, luego de una ponderación individual, con la idea de obtener rentabilidades superiores a la del índice -- Se simula la estrategia desde el año 2007 hasta la fecha, para un período de tiempo de nueve años, y se obtienen rentabilidades superiores al 10% EA, en contraste con la rentabilidad entregada por el índice del 3,15% EA -- La relación beneficio/riesgo del portafolio es igualmente superior cuando se evidencia que su coeficiente de Sharpe, de 0,65, es superior al del índice, de 0,18, lo que contradice la hipótesis de los mercados eficientes -- La estrategia está diseñada de manera modular, lo que permite la futura inclusión de otras compañías, con la idea de aumentar su robustez

Oggetti artistici di metallo : esposizioni retrospettive e contemporanee di industrie artistiche : esposizione del 1886 /

Includes index.

Optical Waveguides and Structures for Short Haul Optical Communication Channels within Printed Circuit Boards

Optical waveguides have shown promising results for use within printed circuit boards. These optical waveguides have higher bandwidth than traditional copper transmission systems and are immune to electromagnetic interference. Design parameters for these optical waveguides are needed to ensure an optimal link budget. Modeling and simulation methods are used to determine the optimal design parameters needed in designing the waveguides. As a result, optical structures necessary for incorporating optical waveguides into printed circuit boards are designed and optimized. Embedded siloxane polymer waveguides are investigated for their use in optical printed circuit boards. This material was chosen because it has low absorption, high temperature stability, and can be deposited using common processing techniques. Two sizes of waveguides are investigated, 50 $unit{mu m}$ multimode and 4 - 9 $unit{mu m}$ single mode waveguides. A beam propagation method is developed for simulating the multimode and single mode waveguide parameters. The attenuation of simulated multimode waveguides are able to match the attenuation of fabricated waveguides with a root mean square error of 0.192 dB. Using the same process as the multimode waveguides, parameters needed to ensure a low link loss are found for single mode waveguides including maximum size, minimum cladding thickness, minimum waveguide separation, and minimum bend radius. To couple light out-of-plane to a transmitter or receiver, a structure such as a vertical interconnect assembly (VIA) is required. For multimode waveguides the optimal placement of a total internal reflection mirror can be found without prior knowledge of the waveguide length. The optimal placement is found to be either 60 µm or 150 µm away from the end of the waveguide depending on which metric a designer wants to optimize the average output power, the output power variance, or the maximum possible power loss. For single mode waveguides a volume grating coupler is designed to couple light from a silicon waveguide to a polymer single mode waveguide. A focusing grating coupler is compared to a perpendicular grating coupler that is focused by a micro-molded lens. The focusing grating coupler had an optical loss of over -14 dB, while the grating coupler with a lens had an optical loss of -6.26 dB.

Isolating the photovoltaic junction: atomic layer deposited TiO2-RuO2 alloy Schottky contacts for silicon photoanodes

We synthesized nanoscale TiO2-RuO2 alloys by atomic layer deposition (ALD) that possess a high work function and are highly conductive. As such, they function as good Schottky contacts to extract photogenerated holes from n-type silicon while simultaneously interfacing with water oxidation catalysts. The ratio of TiO2 to RuO2 can be precisely controlled by the number of ALD cycles for each precursor. Increasing the composition above 16% Ru sets the electronic conductivity and the metal work function. No significant Ohmic loss for hole transport is measured as film thickness increases from 3 to 45 nm for alloy compositions >= 16% Ru. Silicon photoanodes with a 2 nm SiO2 layer that are coated by these alloy Schottky contacts having compositions in the range of 13-46% Ru exhibit average photovoltages of 525 mV, with a maximum photovoltage of 570 mV achieved. Depositing TiO2-RuO2 alloys on nSi sets a high effective work function for the Schottky junction with the semiconductor substrate, thus generating a large photovoltage that is isolated from the properties of an overlying oxygen evolution catalyst or protection layer.

Appraisal of open software for finite element simulation of 2D metal sheet laser cut.

FEA simulation of thermal metal cutting is central to interactive design and manufacturing. It is therefore relevant to assess the applicability of FEA open software to simulate 2D heat transfer in metal sheet laser cuts. Application of open source code (e.g. FreeFem++, FEniCS, MOOSE) makes possible additional scenarios (e.g. parallel, CUDA, etc.), with lower costs. However, a precise assessment is required on the scenarios in which open software can be a sound alternative to a commercial one. This article contributes in this regard, by presenting a comparison of the aforementioned freeware FEM software for the simulation of heat transfer in thin (i.e. 2D) sheets, subject to a gliding laser point source. We use the commercial ABAQUS software as the reference to compare such open software. A convective linear thin sheet heat transfer model, with and without material removal is used. This article does not intend a full design of computer experiments. Our partial assessment shows that the thin sheet approximation turns to be adequate in terms of the relative error for linear alumina sheets. Under mesh resolutions better than 10e−5 m , the open and reference software temperature differ in at most 1 % of the temperature prediction. Ongoing work includes adaptive re-meshing, nonlinearities, sheet stress analysis and Mach (also called ‘relativistic’) effects.

An atomistic simulation of solid state sintering using Monte Carlo methods

This paper presents results on the simulation of the solid state sintering of copper wires using Monte Carlo techniques based on elements of lattice theory and cellular automata. The initial structure is superimposed onto a triangular, two-dimensional lattice, where each lattice site corresponds to either an atom or vacancy. The number of vacancies varies with the simulation temperature, while a cluster of vacancies is a pore. To simulate sintering, lattice sites are picked at random and reoriented in terms of an atomistic model governing mass transport. The probability that an atom has sufficient energy to jump to a vacant lattice site is related to the jump frequency, and hence the diffusion coefficient, while the probability that an atomic jump will be accepted is related to the change in energy of the system as a result of the jump, as determined by the change in the number of nearest neighbours. The jump frequency is also used to relate model time, measured in Monte Carlo Steps, to the actual sintering time. The model incorporates bulk, grain boundary and surface diffusion terms and includes vacancy annihilation on the grain boundaries. The predictions of the model were found to be consistent with experimental data, both in terms of the microstructural evolution and in terms of the sintering time. (C) 2002 Elsevier Science B.V. All rights reserved.

Numerical methods and tangible interfaces for pollutant dispersion simulation

Dissertação apresentada para obtenção do Grau de Doutor em Engenharia do Ambiente, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia