Processed CO2/O2 Float data from 4 deployments near Cape Verde Island (11/2010 - 06/2011)

In recent years, profiling floats, which form the basis of the successful international Argo observatory, are also being considered as platforms for marine biogeochemical research. This study showcases the utility of floats as a novel tool for combined gas measurements of CO2 partial pressure (pCO2) and O2. These float prototypes were equipped with a small-sized and submersible pCO2 sensor and an optode O2 sensor for highresolution measurements in the surface ocean layer. Four consecutive deployments were carried out during November 2010 and June 2011 near the Cape Verde Ocean Observatory (CVOO) in the eastern tropical North Atlantic. The profiling float performed upcasts every 31 h while measuring pCO2, O2, salinity, temperature, and hydrostatic pressure in the upper 200 m of the water column. To maintain accuracy, regular pCO2 sensor zeroings at depth and surface, as well as optode measurements in air, were performed for each profile. Through the application of data processing procedures (e.g., time-lag correction), accuracies of floatborne pCO2 measurements were greatly improved (10-15 µatm for the water column and 5 µatm for surface measurements). O2 measurements yielded an accuracy of 2 µmol/kg. First results of this pilot study show the possibility of using profiling floats as a platform for detailed and unattended observations of the marine carbon and oxygen cycle dynamics.

Impact radiologique liés au transport de matières radioactives par route en Espagne / Radiological impact associated with the transport by road of radioactive material in Spain

Questions relating to the transport of radioactive materials are very much an issue of current interest due to the increasing mobility of the materials involved in the nuclear fuel cycle, commitment to the environment, the safety and protection of persons and the corresponding regulatory legal framework. The radiological impact associated with this type of transport was assessed by means of a new data-processing tool that may be of use and serve as complementary documentation to that included in transport regulations. Thus, by determining the level of radiation at a distance of one metre from the transport vehicle and by selecting a route, the associated impacts will be obtained, such as the affected populations, the dose received by the most highly exposed individual, the overall radiological impact, the doses received by the population along the route and the possible detriment to their health. The most important conclusion is that the emissions of ionising radiation from the transport of radioactive material by road in Spain are not significant as regards the generation of adverse effects on human health, and that their radiological impact may be considered negligible.

Seismic modelling and ava analysis of hidrocarbon traps

In this study, forward seismic modelling of four geological models with Hydrocarbon (HC) traps were performed by ray tracing method to produce synthetic seismogram of each model. The idea is to identify the Hydrocarbon Indicators (HCI‟s) such as bright spot, flat spot, dim spot and Bottom Simulating Reflector (BSR) in the synthethic seismogram. The modelling was performed in DISCO/FOCUS 5.0 seismic data processing programme. Strong positive and negative reflection amplitudes and some artifact reflection horizons were observed on produced seismograms due to rapid changes in subsurface velocity and geometry respectively Additionally, Amplitude-versus-angle (AVA) curves of each HCIs was calculated by the Crewes Zoeppritz Explorer programme. AVA curves show that how the reflection coefficients change with the density and the P and S wave velocities of each layer such as oil, gas, gas hydrate or water saturated sediments. Due to AVA curves, an increase in reflection amplitude with incident angle of seismic waves corresponds to an indicator of a hydrocarbon reservoir

Desarrollo de un modelo de formación del valor inmobiliario en áreas de crecimiento suburbano. Aplicación a la comarca de la Vega Baja del Segura en el litoral alicantino

Una de las principales líneas de investigación de la economía urbana es el comportamiento del mercado inmobiliario y sus relaciones con la estructura territorial. Dentro de este contexto, la reflexión sobre el significado del valor urbano, y abordar su variabilidad, constituye un tema de especial importancia, dada la relevancia que ha supuesto y supone la actividad inmobiliaria en España. El presente estudio ha planteado como principal objetivo la identificación de aquellos factores, ligados a la localización que explican la formación del valor inmobiliario y justifican su variabilidad. Definir este proceso precisa de una evaluación a escala territorial estableciendo aquellos factores de carácter socioeconómico, medioambiental y urbanístico que estructuran el desarrollo urbano, condicionan la demanda de inmuebles y, por tanto, los procesos de formación de su valor. El análisis se centra en valores inmobiliarios residenciales localizados en áreas litorales donde la presión del sector turístico ha impulsado un amplio. Para ello, el ámbito territorial seleccionado como objeto de estudio se sitúa en la costa mediterránea española, al sur de la provincia de Alicante, la comarca de la Vega Baja del Segura. La zona, con una amplia diversidad ecológica y paisajística, ha mantenido históricamente una clara distinción entre espacio urbano y espacio rural. Esta dicotomía ha cambiado drásticamente en las últimas décadas, experimentándose un fuerte crecimiento demográfico y económico ligado a los sectores turístico e inmobiliario, aspectos que han tenido un claro reflejo en los valores inmobiliarios. Este desarrollo de la comarca es un claro ejemplo de la política expansionista de los mercados de suelo que ha tenido lugar en la costa española en las dos últimas décadas y que derivado en la regeneración de un amplio tejido suburbano. El conocimiento del marco territorial ha posibilitado realizar un análisis de variabilidad espacial mediante un tratamiento masivo de datos, así como un análisis econométrico que determina los factores que se valoran positivamente y negativamente por el potencial comprador. Estas relaciones permiten establecer diferentes estructuras matemáticas basadas en los modelos de precios hedónicos, que permiten identificar rasgos diferenciales en los ámbitos económico, social y espacial y su incidencia en el valor inmobiliario. También se ha sistematizado un proceso de valoración territorial a través del análisis del concepto de vulnerabilidad estructural, entendido como una situación de fragilidad debida a circunstancias tanto sociales como económicas, tanto actual como de tendencia en el futuro. Actualmente, esta estructura de demanda de segunda residencia y servicios ha mostrado su fragilidad y ha bloqueado el desarrollo económico de la zona al caer drásticamente la inversión en el sector inmobiliario por la crisis global de la deuda. El proceso se ha agravado al existir un tejido industrial marginal al que no se ha derivado inversiones importantes y un abandono progresivo de las explotaciones agropecuarias. El modelo turístico no sería en sí mismo la causa del bloqueo del desarrollo económico comarcal, sino la forma en que se ha implantado en la Costa Blanca, con un consumo del territorio basado en el corto plazo, poco respetuoso con aspectos paisajísticos y medioambientales, y sin una organización territorial global. Se observa cómo la vinculación entre índices de vulnerabilidad y valor inmobiliario no es especialmente significativa, lo que denota que las tendencias futuras de fragilidad no han sido incorporadas a la hora de establecer los precios de venta del producto inmobiliario analizado. El valor muestra una clara dependencia del sistema de asentamiento y conservación de las áreas medioambientales y un claro reconocimiento de tipologías propias del medio rural aunque vinculadas al sector turístico. En la actualidad, el continuo descenso de la demanda turística ha provocado una clara modificación en la estructura poblacional y económica. Al incorporar estas modificaciones a los modelos especificados podemos comprobar un verdadero desmoronamiento de los valores. Es posible que el remanente de vivienda construida actualmente vaya dirigido a un potencial comprador que se encuentra en retroceso y que se vincula a unos rasgos territoriales ya no existentes. Encontrar soluciones adaptables a la oferta existente, implica la viabilidad de renovación del sistema poblacional o modificaciones a nivel económico. La búsqueda de respuestas a estas cuestiones señala la necesidad de recanalizar el desarrollo, sin obviar la potencialidad del ámbito. SUMMARY One of the main lines of research regarding the urban economy focuses on the behavior of the real estate market and its relationship to territorial structure. Within this context, one of the most important themes involves considering the significance of urban property value and dealing with its variability, particularly given the significant role of the real estate market in Spain, both in the past and present. The main objective of this study is to identify those factors linked to location, which explain the formation of property values and justify their variability. Defining this process requires carrying out an evaluation on a territorial scale, establishing the socioeconomic, environmental and urban planning factors that constitute urban development and influence the demand for housing, thereby defining the processes by which their value is established. The analysis targets residential real estate values in coastal areas where pressure from the tourism industry has prompted large-scale transformations. Therefore, the focal point of this study is an area known as Vega Baja del Segura, which is located on the Spanish Mediterranean coast in southern Alicante (province). Characterized by its scenic and ecological diversity, this area has historically maintained a clear distinction between urban and rural spaces. This dichotomy has drastically changed in past decades due to the large increase in population attributed to the tourism and real estate markets – factors which have had a direct effect on property values. The development of this area provides a clear example of the expansionary policies which have affected the housing market on the coast of Spain during the past two decades, resulting in a large increase in suburban development. Understanding the territorial framework has made it possible to carry out a spatial variability analysis through massive data processing, as well as an econometric analysis that determines the factors that are evaluated positively and negatively by potential buyers. These relationships enable us to establish different mathematical systems based on hedonic pricing models that facilitate the identification of differential features in the economic, social and spatial spheres, and their impact on property values. Additionally, a process for land valuation was established through an analysis of the concept of structural vulnerability, which is understood to be a fragile situation resulting from either social or economic circumstances. Currently, this demand structure for second homes and services has demonstrated its fragility and has inhibited the area’s economic development as a result of the drastic fall in investment in the real estate market, due to the global debt crisis. This process has been worsened by the existence of a marginal industrial base into which no important investments have been channeled, combined with the progressive abandonment of agricultural and fishing operations. In and of itself, the tourism model did not inhibit the area’s economic development, rather it is the result of the manner in which it was implemented on the Costa Brava, with a land consumption based on the short-term, lacking respect for landscape and environmental aspects and without a comprehensive organization of the territory. It is clear that the link between vulnerability indexes and property values is not particularly significant, thereby indicating that future fragility trends have not been incorporated into the problem in terms of establishing the sale prices of the analyzed real estate product in question. Urban property values are clearly dependent on the system of development and environmental conservation, as well as on a clear recognition of the typologies that characterize rural areas, even those linked to the tourism industry. Today, the continued drop in tourism demand has provoked an obvious modification in the populational and economic structures. By incorporating these changes into the specified models, we can confirm a real collapse in values. It’s possible that the surplus of already-built homes is currently being marketed to a potential buyer who is in recession and linked to certain territorial characteristics that no longer exist. Finding solutions that can be adapted to the existing offer implies the viability of renewing the population system or carrying out modifications on an economic level. The search for answers to these questions suggests the need to reform the development model, without leaving out an area’s potentiality.

Automatic Adaptation of Airport Surface Surveillance to Sensor Quality

This paper describes a novel method to enhance current airport surveillance systems used in Advanced Surveillance Monitoring Guidance and Control Systems (A-SMGCS). The proposed method allows for the automatic calibration of measurement models and enhanced detection of nonideal situations, increasing surveillance products integrity. It is based on the definition of a set of observables from the surveillance processing chain and a rule based expert system aimed to change the data processing methods

A Fast Reconfigurable 2D HW Core Architecture on FPGAs for Evolvable Self- Adaptive Systems

Modern FPGAs with Dynamic and Partial Reconfiguration (DPR) feature allow the implementation of complex, yet flexible, hardware systems. Combining this flexibility with evolvable hardware techniques, real adaptive systems, able to reconfigure themselves according to environmental changes, can be envisaged. In this paper, a highly regular and modular architecture combined with a fast reconfiguration mechanism is proposed, allowing the introduction of dynamic and partial reconfiguration in the evolvable hardware loop. Results and use case show that, following this approach, evolvable processing IP Cores can be built, providing intensive data processing capabilities, improving data and delay overheads with respect to previous proposals. Results also show that, in the worst case (maximum mutation rate), average reconfiguration time is 5 times lower than evaluation time.

Implementación de Algoritmos de Procesado de Señal sobre FPGA: Especificación, Reutilización y Exploración del Espacio de Diseño

Esta Tesis aborda el diseño e implementación de aplicaciones en el campo de procesado de señal, utilizando como plataforma los dispositivos reconfigurables FPGA. Esta plataforma muestra una alta capacidad de lógica, e incorpora elementos orientados al procesado de señal, que unido a su relativamente bajo coste, la hacen ideal para el desarrollo de aplicaciones de procesado de señal cuando se requiere realizar un procesado intensivo y se buscan unas altas prestaciones. Sin embargo, el coste asociado al desarrollo en estas plataformas es elevado. Mientras que el aumento en la capacidad lógica de los dispositivos FPGA permite el desarrollo de sistemas completos, los requisitos de altas prestaciones obligan a que en muchas ocasiones se deban optimizar operadores a muy bajo nivel. Además de las restricciones temporales que imponen este tipo de aplicaciones, también tienen asociadas restricciones de área asociadas al dispositivo, lo que obliga a evaluar y verificar entre diferentes alternativas de implementación. El ciclo de diseño e implementación para estas aplicaciones se puede prolongar tanto, que es normal que aparezcan nuevos modelos de FPGA, con mayor capacidad y mayor velocidad, antes de completar el sistema, y que hagan a las restricciones utilizadas para el diseño del sistema inútiles. Para mejorar la productividad en el desarrollo de estas aplicaciones, y con ello acortar su ciclo de diseño, se pueden encontrar diferentes métodos. Esta Tesis se centra en la reutilización de componentes hardware previamente diseñados y verificados. Aunque los lenguajes HDL convencionales permiten reutilizar componentes ya definidos, se pueden realizar mejoras en la especificación que simplifiquen el proceso de incorporar componentes a nuevos diseños. Así, una primera parte de la Tesis se orientará a la especificación de diseños basada en componentes predefinidos. Esta especificación no sólo busca mejorar y simplificar el proceso de añadir componentes a una descripción, sino que también busca mejorar la calidad del diseño especificado, ofreciendo una mayor posibilidad de configuración e incluso la posibilidad de informar de características de la propia descripción. Reutilizar una componente ya descrito depende en gran medida de la información que se ofrezca para su integración en un sistema. En este sentido los HDLs convencionales únicamente proporcionan junto con la descripción del componente la interfaz de entrada/ salida y un conjunto de parámetros para su configuración, mientras que el resto de información requerida normalmente se acompaña mediante documentación externa. En la segunda parte de la Tesis se propondrán un conjunto de encapsulados cuya finalidad es incorporar junto con la propia descripción del componente, información que puede resultar útil para su integración en otros diseños. Incluyendo información de la implementación, ayuda a la configuración del componente, e incluso información de cómo configurar y conectar al componente para realizar una función. Finalmente se elegirá una aplicación clásica en el campo de procesado de señal, la transformada rápida de Fourier (FFT), y se utilizará como ejemplo de uso y aplicación, tanto de las posibilidades de especificación como de los encapsulados descritos. El objetivo del diseño realizado no sólo mostrará ejemplos de la especificación propuesta, sino que también se buscará obtener una implementación de calidad comparable con resultados de la literatura. Para ello, el diseño realizado se orientará a su implementación en FPGA, aprovechando tanto los elementos lógicos generalistas como elementos específicos de bajo nivel disponibles en estos dispositivos. Finalmente, la especificación de la FFT obtenida se utilizará para mostrar cómo incorporar en su interfaz información que ayude para su selección y configuración desde fases tempranas del ciclo de diseño. Abstract This PhD. thesis addresses the design and implementation of signal processing applications using reconfigurable FPGA platforms. This kind of platform exhibits high logic capability, incorporates dedicated signal processing elements and provides a low cost solution, which makes it ideal for the development of signal processing applications, where intensive data processing is required in order to obtain high performance. However, the cost associated to the hardware development on these platforms is high. While the increase in logic capacity of FPGA devices allows the development of complete systems, high-performance constraints require the optimization of operators at very low level. In addition to time constraints imposed by these applications, Area constraints are also applied related to the particular device, which force to evaluate and verify a design among different implementation alternatives. The design and implementation cycle for these applications can be tedious and long, being therefore normal that new FPGA models with a greater capacity and higher speed appear before completing the system implementation. Thus, the original constraints which guided the design of the system become useless. Different methods can be used to improve the productivity when developing these applications, and consequently shorten their design cycle. This PhD. Thesis focuses on the reuse of hardware components previously designed and verified. Although conventional HDLs allow the reuse of components already defined, their specification can be improved in order to simplify the process of incorporating new design components. Thus, a first part of the PhD. Thesis will focus on the specification of designs based on predefined components. This specification improves and simplifies the process of adding components to a description, but it also seeks to improve the quality of the design specified with better configuration options and even offering to report on features of the description. Hardware reuse of a component for its integration into a system largely depends on the information it offers. In this sense the conventional HDLs only provide together with the component description, the input/output interface and a set of parameters for its configuration, while other information is usually provided by external documentation. In the second part of the Thesis we will propose a formal way of encapsulation which aims to incorporate with the component description information that can be useful for its integration into other designs. This information will include features of the own implementation, but it will also support component configuration, and even information on how to configure and connect the component to carry out a function. Finally, the fast Fourier transform (FFT) will be chosen as a well-known signal processing application. It will be used as case study to illustrate the possibilities of proposed specification and encapsulation formalisms. The objective of the FFT design is not only to show practical examples of the proposed specification, but also to obtain an implementation of a quality comparable to scientific literature results. The design will focus its implementation on FPGA platforms, using general logic elements as base of the implementation, but also taking advantage of low-level specific elements available on these devices. Last, the specification of the obtained FFT will be used to show how to incorporate in its interface information to assist in the selection and configuration process early in the design cycle.