Estudo das propriedades analgésicas da Achillea millefolium L. (Asteraceae)

This study was designed to separately evaluate the analgesic capacity of 15% tea from Achillea millefolium leaves and florid ends. Three different tests were performed. The animals were separated in 3 groups: group I (control) that received water, group II that received florid end tea, and group III that received leaf tea. The first test was the writhing test induced by intraperitoneal injection of acetic acid in male Swiss mice. The second test consisted of the measurement of tail flick reflex latency (TFRL) in male Wistar rats after receiving a painful thermal stimulus. The groups received the teas or water per os, prior to observation. In the third test, the Wistar rats were submitted to an approximately 1 cm long incision in their tails to test the effect of the teas on induced inflammatory pain. The results showed that the effect of the 15% leaf tea on the mice writhing and TFRL test were not statistically significant. The florid ends tea showed a significantly increase in number of writhes in mice and TFRL in rats after administration. With regard to the effect of the teas on inflammatory pain, ingestion of both preparations caused an increase in the force threshold necessary for the avoidance reflex, indicating antihyperalgesic action of both the leaf and florid ends 15% teas of Achillea millefolium.

Effect of surface treatments on the resin bond to zirconium-based ceramic

Purpose: This study tested the hypothesis that the tribochemical silica coating on ceramic surfaces increases the bond strength of resin cement to a glass-infiltrated zirconium-based ceramic. Materials and Methods: Fifteen blocks of In-Ceram Zirconia from CEREC InLab (5 per group) and 15 composite blocks (Z-250) 5 mm x 5 mm x 4 mm were made. The ceramic surfaces were polished, and the blocks were divided into three groups: (1) airborne abrasion with 110-μm aluminum oxide particles; (2) Rocatec system, tribochemical silica coating; and (3) CoJet system, tribochemical silica coating. The ceramic blocks were cemented to the composite blocks using Panavia F according to the manufacturer's specifications. All samples were stored in 37°C distilled water for 7 days and later sectioned in two axes using a diamond disk under cooling to obtain specimens with a cross-sectional area of approximately 1 mm2 (n = 45). Each specimen was then attached with cyanoacrylate glue to an adapted device for the microtensile test, which was carried out on a universal testing machine. Results: The results were subjected to ANOVA and Tukey's test. Group 2 (23.0 ± 6.7 MPa) and group 3 (26.8 ± 7.4 MPa) showed greater bond strength than group 1 (15.1 ± 5.3 MPa). There was no significant difference between groups 2 and 3. All failures were in the adhesive zone. Conclusion: The hypothesis was confirmed - the tribochemical systems increased the bond strength between Panavia F and In-Ceram Zirconia.

Additional observations on the gross morphology and microstructure of Baccaconularia Hughes, Gunderson et Weedon, 2000, a Cambrian (Furongian) conulariid from the north-central USA

Baccaconularia Hughes, Gunderson et Weedon, 2000, from the Furongian Series (Cambrian System) of the north-central USA, has been interpreted as a conulariid cnidarian, based on a suite of gross morphological similarities shared only with other post-Cambrian genera currently assigned to this group. Closely spaced, squarish to subrectangular facial nodes of Baccaconularia are aligned in distinct longitudinal files. Nodes also display a subtler, more or less rectilinear transverse alignment, though this pattern commonly is disrupted by offset parallel to the longitudinal files. In their shape and pattern of arrangement, the nodes of Baccaconularia are most similar to the squarish to elongate nodes of Pseudoconularia Bouček, 1939. Longitudinal node files of Baccaconularia may also be compared with the longitudinal facial ridges of Conularia cambria Walcott, 1890 from the Furongian of Wisconsin. Apical angles of Baccaconularia range from approximately 13° to 14.5°. Scanning electron imaging of B. cf. robinsoni shows that its thin, phosphatic skeleton is finely lamellar, with the thickness of individual lamellae measuring approximately 1 μm. The skeleton also exhibits microscopic circular pores and crater-like pits that range from approximately 5 to 10 μm in diameter. These pores and pits are similar in size, geometry, areal density and pattern of arrangement to those of many post-Cambrian conulariids. Microscopic circular pores are documented here for the first time in the genus Archaeoconularia Bouček, 1939 from the Upper Ordovician of the Czech Republic. Although the origin of the pores and pits is open to alternative interpretations, the discovery of these features and fine lamination in Baccaconularia strengthens the argument that this genus is a Cambrian conulariid. © 2006 Nanjing Institute of Geology and Palaeontology, CAS.

Análise multivariada aplicada em bacias hidrográficas no município de Botucatu-SP

As imagens aerofotogramétricas de uma região registram os vários aspectos da paisagem, destacando a cobertura vegetal, a rede de drenagem e principalmente o relevo do terreno conjunto que caracterizam unidades morfométricas denominadas bacias hidrográficas. Neste trabalho aplicaram-se técnicas fotointerpretativas e estatística multivariada a variáveis do relevo, medidas em bacias hidrográficas de terceira ordem de ramificação pertencentes à bacia do rio Tiête no município de Botucatu-SP, com o objetivo de agrupar bacias segundo graus de similaridade, bem como inferir sobre a representatividade da distribuição espacial dos agrupamentos em relação ao Mapa Pedológico do Estado de São Paulo, da Embrapa de 1999. Foram utilizadas fotografias aéreas verticais, escala nominal aproximada 1:30000, (2005), cartas planialtimétricas escala 1:50000 e Mapa Pedológico do Estado de São Paulo. Foram estudadas 06 bacias hidrográficas de 3aordem de ramificação, situada na região fisiográfica denominada frente da cuesta abrangendo as unidades de solo Neossolos Litólicos (RL) e Latossolos Vermelhos distrófico (LVdf), sendo esta última predominante na área de estudo. O conjunto de variáveis de relevo mostrou-se eficiente no agrupamento das bacias conforme as unidades de solos ocorrentes, concordando com as unidades identificadas no Mapa Pedológico.

Sex ratio, growth and recruitment of the pelagic shrimp Acetes americanus on the southeastern coast of Brazil

We evaluated the population dynamics of Acetes americanus Ortmann, 1893 focusing on sex ratio, individual growth, longevity, and the juvenile recruitment period. Samples were collected monthly from January 2006 to June 2007 in the bay of Ubatuba, Brazil. Specimen growth was identified for each gender, and the chosen cohorts were fitted in a von Bertalanffy Growth Model (VBGM); longevity was estimated by the von Bertalanffy inverse equation, considering 99% of the asymptotic length. A total of 6881 individuals (2343 males and 4538 females) were captured. On average the body size (total length) was greater in females (14.64 ± 3.34 mm) than in males (12.27 ± 1.86 mm). The mean growth curves (obtained by grouping the cohorts for each sex), provided estimates of TL∞ = 19.33 mm, k = 0.02 and t0 = -0.12 days for females and TL∞ = 15.13 mm, k = 0.03 and to = -0.07 days for males, where TL∞ is the asymptotic length, k is coefficient of growth and to is the theorical age when the size is equal to 0. Longevity was estimated at 0.61 years for females and 0.50 years for males. The sex ratio tended to favor females, which corroborates with others studies of sergestids. Our finding that males of A. americanus have higher values of k and therefore achieve a smaller size relative to females has been observed in other penaeids. We concluded that this differential growth pattern between the sexes is found across Dendrobranchiata. The life cycles of penaeids have an average duration of approximately 1-2 years, but our results corroborate other studies that estimate a shorter longevity for Acetes, as species of this genus are typically smaller in size. We found continuous recruitment with two main peaks observed during the study period, corroborating previous studies of Acetes. © The Crustacean Society, 2013. Published by Brill NV, Leiden.

Low-level laser therapy in pediatric bell's palsy: Case report in a three-year-old child

Objectives: The objective of this study was to apply low-level laser therapy (LLLT) to accelerate the recovery process of a child patient with Bell's palsy (BP). Design: This was a prospective study. Subject: The subject was a three-year-old boy with a sudden onset of facial asymmetry due to an unknown cause. Materials and methods: The low-level laser source used was a gallium aluminum arsenide semiconductor diode laser device (660 nm and 780 nm). No steroids or other medications were given to the child. The laser beam with a 0.04-cm2 spot area, and an aperture with approximately 1-mm diameter, was applied in a continuous emission mode in direct contact with the facial area. The duration of a laser session was between 15 and 30 minutes, depending on the chosen points and the area being treated. Light was applied 10 seconds per point on a maximum number of 80 points, when the entire affected (right) side of the face was irradiated, based on the small laser beam spot size. According to the acupuncture literature, this treatment could also be carried out using 10-20 Chinese acupuncture points, located unilaterally on the face. In this case study, more points were used because the entire affected side of the face (a large area) was irradiated instead of using acupuncture points. Outcome measures: The House-Brackmann grading system was used to monitor the evolution of facial nerve motor function. Photographs were taken after every session, always using the same camera and the same magnitude. The three-year-old boy recovered completely from BP after 11 sessions of LLLT. There were 4 sessions a week for the first 2 weeks, and the total treatment time was 3 weeks. Results: The result of this study was the improvement of facial movement and facial symmetry, with complete reestablishment to normality. Conclusions: LLLT may be an alternative to speed up facial normality in pediatric BP. © Copyright 2013, Mary Ann Liebert, Inc. 2013.

Occurrence of mycobacteria in bovine milk samples from both individual and collective bulk tanks at farms and informal markets in the southeast region of Sao Paulo, Brazil

Background: Mycobacterium spp. is one of the most important species of zoonotic pathogens that can be transmitted from cattle to humans. The presence of these opportunistic, pathogenic bacteria in bovine milk has emerged as a public-health concern, especially among individuals who consume raw milk and related dairy products. To address this concern, the Brazilian control and eradication program focusing on bovine tuberculosis, was established in 2001. However, bovine tuberculosis continues to afflict approximately 1,3 percent of the cattle in Brazil. In the present study, 300 samples of milk from bovine herds, obtained from both individual and collective bulk tanks and informal points of sale, were cultured on Löwenstein-Jensen and Stonebrink media. Polymerase chain reaction (PCR)-based tests and restriction-enzyme pattern analysis were then performed on the colonies exhibiting phenotypes suggestive of Mycobacterium spp., which were characterized as acid-fast bacilli.Results: Of the 300 bovine milk samples that were processed, 24 were positively identified as Mycobacterium spp.Molecular identification detected 15 unique mycobacterial species: Mycobacterium bovis, M. gordonae, M. fortuitum, M. intracellulare, M. flavescens, M. duvalii, M. haemophilum, M. immunogenum, M. lentiflavum, M. mucogenicum, M. novocastrense, M. parafortuitum, M. smegmatis, M. terrae and M. vaccae. The isolation of bacteria from the various locations occurred in the following proportions: 9 percent of the individual bulk-tank samples, 7 percent of the collective bulk-tank samples and 8 percent of the informal-trade samples. No statistically significant difference was observed between the presence of Mycobacterium spp. in the three types of samples collected, the milk production profiles, the presence of veterinary assistance and the reported concerns about bovine tuberculosis prevention in the herds.Conclusion: The microbiological cultures associated with PCR-based identification tests are possible tools for the investigation of the presence of Mycobacterium spp. in milk samples. Using these methods, we found that the Brazilian population may be regularly exposed to mycobacteria by consuming raw bovine milk and related dairy products. These evidences reinforces the need to optimize quality programs of dairy products, to intensify the sanitary inspection of these products and the necessity of further studies on the presence of Mycobacterium spp. in milk and milk-based products. © 2013 Franco et al.; licensee BioMed Central Ltd.

Análise das tensões de água no solo cultivado com morangueiro sob poda

Strawberry yield and quality was evaluated after drastic pruning (second cycle), under different soil water tensions, drip irrigation. The experiment was conducted on beds at a greenhouse, located at Engineering Department, Federal University of Lavras (UFLA), from April to December of 2010. An experimental design was in randomized blocks with three replicates. The treatments were composed of six different soil water tension, 15, 25, 35, 45, 55 e 70 kPa. Results obtained allowed to verify that to higher values of: total and commercial fresh weight of fruits per plant, total and commercial number fruits per plant and total and commercial yield, it is necessary to irrigate when soil water tension gets approximately to 15 kPa, at 0.15 m deep. Commercial average fruit mass and noncommercial fresh weight of fruits per plant, were not reduced under different soil water tensions applied.

Genetic variability for temperament indicators of Nellore cattle

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Esterilização de materiais termossensíveis através de aplicação de plasma gerado por descarga com barreira dielétrica (DBD)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Busca de parceiros físicos por duplo-híbrido das proteínas ADAM23 e MX1, codificadas por genes metilados em câncer de cabeça e pescoço

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Resistência de espécies silvestres de amendoim (Arachis spp.) ao ataque de Enneothrips flavens Moulton, 1941 (Thysanoptera: Thripidae) e Stegasta bosquella (Chambers, 1875) (Lepidoptera: Gelechiidae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção e caracterização de micro e nanofibras de Poli(fluoreto de vinilideno) - PVDF obtidos pela técnica de fiação por sopro em solução

Pós-graduação em Ciência dos Materiais - FEIS

Fatores de predição de mortalidade em pacientes com insuficiência respiratória crônica em uso de oxigenoterapia domiciliar prolongada

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Mapeamento da sensibilidade ambiental do litoral de Ubatuba-SP a vazamentos de petróleo

Pós-graduação em Geociências e Meio Ambiente - IGCE