Effects of chloride substitution on the chemical and physical properties and the crystallization behavior in heavy metal fluoride glasses

Effect of the substitutions of chloride for fluoride on the chemical and physical properties and the crystallization behavior in heavy metal fluoride glasses has been investigated. The characteristic temperature of the glass does not changed obviously when the fluoride was taken place by chloride. Compared with samples of being free of ErF3, the doping samples are more inclined to be surface crystallization. Optical basicity in the glass system increases with increasing the negative charge provided by the chloride atoms and the absorption peak red shifted is observed in absorption spectra. XRD measurements show that not a single crystalline phase appears in the heated glass samples, which indicate the substitutions of chloride for fluoride with a variety of crystalline precipitation trends. (c) 2007 Elsevier B.V All rights reserved.

Reactions of fishes to two underwater survey tools, a manned submersible and a remotely operated vehicle

We examined the reactions of fishes to a manned submersible and a remotely operated vehicle (ROV) during surveys conducted in habitats of rock and mud at depths of 30–408 m off central California in 2007. We observed 26 taxa for 10,550 fishes observed from the submersible and for 16,158 fishes observed from the ROV. A reaction was defined as a distinct movement of a fish that, for a benthic or hovering individual, was greater than one body length away from its initial position or, for a swimming individual, was a change of course or speed. Of the observed fishes, 57% reacted to the ROV and 11% reacted to the submersible. Aggregating species and those species initially observed off the seafloor reacted most often to both vehicles. Fishes reacted more often to each vehicle when they were >1 m above the seafloor (22% of all fishes >1 m above the seafloor reacted to the submersible and 73% to the ROV) than when they were in contact with the seafloor (2% of all reactions to the submersible and 18% to the ROV). Fishes reacted by swimming away from both vehicles rather than toward them. Consideration of these reactions can inform survey designs and selection of survey tools and can, thereby, increase the reliability of fish assemblage metrics (e.g., abundance, density, and biomass) and assessments of fish and habitat associations.

Substitution of Artemia with Brachionus in different ratios during larval rearing of Macrobrachium rosenbergii and evaluation of their feed efficacy

Larval growth during stage I-VIII was studied in Macrobrachium rosenbergii. Duration in moult periodicity were recorded-during larval development period, larvae were fed with Brachionus (grown on Baker's yeast and also Brachinous raised through organic manuring in outdoor culture containers). The performance of the feed was evaluated through substitution of Brachionus in the feeding protocol, in lieu of Artemia 1st instar. The Artemia, Brachionus substitution ratio of 75:25 was found to be most efficient. The study also indicates that the comparative growth rate of Brachionus plicatilis is higher in manure loaded tanks than with Baker's yeast. Growth rate "Y'' in culture tank being 0.245 and 0.112 and corresponding duplicating time (Td) too was found to be 2.855 and 6.365 respectively in tanks manured/enriched with pig manure.

Substitution of live feed by formulated diet: effect on the growth and survival of Betta splendens (Regan) fry

The present work evaluates the effectiveness of partial or total replacement of live feed (LF) (Tubifex) together with formulated diet (FD) for Betta splendens. Three hundred Betta splendens fry of uniform size (mean weight 0.19±0.01g) were equally distributed in five treatment groups with three replicates in glass aquaria of 351itre capacity. Fishes were given diets at different ratio of LF and FD viz. T1(C) 100% LF; T2 75% LF, 25% FD; T3 50% LF, 50% FD; T4 25% LF, 75% FD and T5 100% FD and the experiment continued for 105 days. T2 group registered highest (P<0.05) % body weight gain (125.61±0.26) and specific growth rate (2.34±0.02), which was similar to T1 and T3 groups. Lowest FCR was recorded in T2 (2.40±0.11) group, which was similar to Tl, T3 and T4 groups. Highest (P<0.05) PER was observed in T4 (1.00±0.03) group, which was similar to T3 and T5 groups. At the end of experiment, highest % survival was recoded in T1, T2 and T3 groups (96.67±1.67), which was similar to T4 group. From the study, it is concluded that LF can be successfully replaced up to 75% by FD without any adverse effect on the growth and survival of Betta splendens.

Determination of threshold current densities for different reactions of fishes using a pantostat

The threshold current densities required for first reaction, galvanotaxis and galvanonarcosis of fish depended upon species, length of the body, conductivity of water, nature of current and frequency of impulses. The threshold values and their ratios decreased with increase in length of fish. With rise in conductivity of water in the ratio of 1:4:13, these values increased in the ratio 1: 2:5. Impulse D. C was superior to continuous D. C and the threshold values of current densities for different reactions of fish decreased with rise in impulse frequency reaching minimum at an impulse frequency of 48/sec. Among Salmo irideus, ldus melanotus and Cyprinus carpio, the first one was affected earlier and required minimum current densities to exhibit the reactions, while the last one showed similar reactions only at higher current densities.

Import substitution of combination wire rope. Part 1. Design, production and evaluation of a prototype combination wire rope

Model combination wire ropes with different covering materials were prepared and worked out specification for the prototype. A table model hand operated wire rope twisting machine was also developed for this. Prototype combination wire rope was twisted in collaboration with M/s South India Wire Ropes Ltd., Alwaye. Specification details, properties and field performance of the prototype studied are reported.

Import substitution of combination wire rope. Part 2. Production and standardisation of 17 mm dia combination wire rope.

The prototype combination wire rope (Cift-CWR 1) developed for deep sea trawling was further studied for improvement, optimisation of efficiency and standardization. A series of improved prototype combination wire ropes (Cift-CWR 2 to 6) were twisted and evaluated their mechanical properties and reported in this paper with recommendations for a standard 17mm dia combination wire rope of 6S (7C+8+1 Scr) + 6 Crs(6+1+1 Crc) construction.

Import substitution of combination wire rope. Part 3: Comparison of standard Cift-CWR and imported combination wire rope

Tensile and extension properties of standard Cift-CWR and imported combination wire ropes from Japan, Norway and Denmark are studied and the analysis is presented in the paper. Tensile and chemical properties of steel wire, tensile and abrasive properties of PP covering, effect of twist on material at different stages are worked out and reported.