874 resultados para SET GOALS
Resumo:
Over the last several years, lawmakers have been responding to several highly publicized child abduction, assault and murder cases. While such cases remain rare in Iowa, the public debates they have generated are having far-reaching effects. Policy makers are responsible for controlling the nature of such effects. Challenges they face stem from the need to avoid primarily politically-motivated responses and the desire to make informed decisions that recognize both the strengths and the limitations of the criminal justice system as a vehicle for promoting safe and healthy families and communities. Consensus was reached by the Task Force at its first meeting that one of its standing goals is to provide nonpartisan guidance to help avoid or fix problematic sex offense policies and practices. Setting this goal was a response to the concern over what can result from elected officials’ efforts to respond to the types of sex offender-related concerns that can easily become emotionally laden and politically charged due to the universally held abhorrence of sex crimes against children. The meetings of the Task Force and the various work groups it has formed have included some spirited and perhaps emotionally charged discussions, despite the above-stated ground rule. However, as is described in the report, the Task Force’s first set of recommendations and plans for further study were approved through consensus. It is hoped that in upcoming legislative deliberations, it will be remembered that the non-legislative members of the Task Force all agreed on the recommendations contained in this report. The topics discussed in this first report from the Task Force are limited to the study issues specifically named in H.F. 619, the Task Force’s enabling legislation. However, other topics of concern were discussed by the Task Force because of their immediacy or because of their possible relationships with one or more of the Task Force’s mandated study issues. For example, it has been reported by some probation/parole officers and others that the 2000 feet rule has had a negative influence on treatment participation and supervision compliance. While such concerns were noted, the Task Force did not take it upon itself to investigate them at this time and thus broaden the agenda it was given by the General Assembly last session. As a result, the recently reinstated 2000 feet rule, the new cohabitation/child endangerment law and other issues of interest to Task Force members but not within the scope of their charge are not discussed in the body of this report. An issue of perhaps the greatest interest to most Task Force members that was not a part of their charge was a belief in the benefit of viewing Iowa’s efforts to protect children from sex crimes with as comprehensive a platform as possible. It has been suggested that much more can be done to prevent child-victim sex crimes than would be accomplished by only concentrating on what to do with offenders after a crime has occurred. To prevent child victimization, H.F. 619 policy provisions rely largely on incapacitation and future deterrent effects of increased penalties, more restrictive supervision practices and greater public awareness of the risk presented by a segment of Iowa’s known sex offenders. For some offenders, these policies will no doubt prevent future sex crimes against children, and the Task Force has begun long-term studies to look for the desired results and for ways to improve such results through better supervision tools and more effective offender treatment. Unfortunately, much of the effects from the new policies may primarily influence persons who have already committed sex offenses against minors and who have already been caught doing so. Task Force members discussed the need for a range of preventive efforts and a need to think about sex crimes against children from other than just a “reaction- to-the-offender” perspective. While this topic is not addressed in the report that follows, it was suggested that some of the Task Force’s discussions could be briefly shared through these opening comments. Along with incapacitation and deterrence, comprehensive approaches to the prevention of child-victim sex crimes would also involve making sure parents have the tools they need to detect signs of adults with sex behavior problems, to help teach their children about warning signs and to find the support they need for healthy parenting. School, faithbased and other community organizations might benefit from stronger supports and better tools they can use to more effectively promote positive youth development and the learning of respect for others, respect for boundaries and healthy relationships. All of us who have children, or who live in communities where there are children, need to understand the limitations of our justice system and the importance of our own ability to play a role in preventing sexual abuse and protecting children from sex offenders, which are often the child’s own family members. Over 1,000 incidences of child sexual abuse are confirmed or founded each year in Iowa, and most such acts take place in the child’s home or the residence of the caretaker of the child. Efforts to prevent child sexual abuse and to provide for early interventions with children and families at risk could be strategically examined and strengthened. The Sex Offender Treatment and Supervision Task Force was established to provide assistance to the General Assembly. It will respond to legislative direction for adjusting its future plans as laid out in this report. Its plans could be adjusted to broaden or narrow its scope or to assign different priority levels of effort to its current areas of study. Also, further Task Force considerations of the recommendations it has already submitted could be called for. In the meantime, it is hoped that the information and recommendations submitted through this report prove helpful.
Resumo:
This study aims to improve the accuracy and usability of Iowa Falling Weight Deflectometer (FWD) data by incorporating significant enhancements into the fully-automated software system for rapid processing of the FWD data. These enhancements include: (1) refined prediction of backcalculated pavement layer modulus through deflection basin matching/optimization, (2) temperature correction of backcalculated Hot-Mix Asphalt (HMA) layer modulus, (3) computation of 1993 AASHTO design guide related effective SN (SNeff) and effective k-value (keff ), (4) computation of Iowa DOT asphalt concrete (AC) overlay design related Structural Rating (SR) and kvalue (k), and (5) enhancement of user-friendliness of input and output from the software tool. A high-quality, easy-to-use backcalculation software package, referred to as, I-BACK: the Iowa Pavement Backcalculation Software, was developed to achieve the project goals and requirements. This report presents theoretical background behind the incorporated enhancements as well as guidance on the use of I-BACK developed in this study. The developed tool, I-BACK, provides more fine-tuned ANN pavement backcalculation results by implementation of deflection basin matching optimizer for conventional flexible, full-depth, rigid, and composite pavements. Implementation of this tool within Iowa DOT will facilitate accurate pavement structural evaluation and rehabilitation designs for pavement/asset management purposes. This research has also set the framework for the development of a simplified FWD deflection based HMA overlay design procedure which is one of the recommended areas for future research.
Resumo:
This study aims to improve the accuracy and usability of Iowa Falling Weight Deflectometer (FWD) data by incorporating significant enhancements into the fully-automated software system for rapid processing of the FWD data. These enhancements include: (1) refined prediction of backcalculated pavement layer modulus through deflection basin matching/optimization, (2) temperature correction of backcalculated Hot-Mix Asphalt (HMA) layer modulus, (3) computation of 1993 AASHTO design guide related effective SN (SNeff) and effective k-value (keff ), (4) computation of Iowa DOT asphalt concrete (AC) overlay design related Structural Rating (SR) and kvalue (k), and (5) enhancement of user-friendliness of input and output from the software tool. A high-quality, easy-to-use backcalculation software package, referred to as, I-BACK: the Iowa Pavement Backcalculation Software, was developed to achieve the project goals and requirements. This report presents theoretical background behind the incorporated enhancements as well as guidance on the use of I-BACK developed in this study. The developed tool, I-BACK, provides more fine-tuned ANN pavement backcalculation results by implementation of deflection basin matching optimizer for conventional flexible, full-depth, rigid, and composite pavements. Implementation of this tool within Iowa DOT will facilitate accurate pavement structural evaluation and rehabilitation designs for pavement/asset management purposes. This research has also set the framework for the development of a simplified FWD deflection based HMA overlay design procedure which is one of the recommended areas for future research.
Resumo:
There is an increased interest in constructing Pre-Cast (PC) Twin and Triple Reinforced Concrete Box (RCB) culverts in Iowa due to the efficiency associated with their production in controlled environment and decrease of the construction time at the culvert sites. The design of the multi-barrel PC culverts is, however, based on guidelines for single-barrel cast-inplace (CIP) culverts despite that the PC and CIP culverts have different geometry. There is scarce information for multiplebarrel RCB culverts in general and even fewer on culverts with straight wingwalls as those designed by Iowa DOT. Overall, the transition from CIP to PC culverts requires additional information for improving the design specifications currently in use. Motivated by the need to fill these gaps, an experimental study was undertaken by IIHR-Hydroscience & Engineering. The goals of the study are to document flow performance curves and head losses at the culvert entrance for a various culvert geometry, flow conditions, and settings. The tests included single-, double- and triple-barrel PC and CIP culverts with two span-to-rise ratios set on mild and steep slopes. The tests also included optimization of the culvert geometry entrance by considering various configurations for the top bevel. The overall conclusion of the study is that by and large the current Iowa DOT design specifications for CIP culverts can be used for multi-barrel PC culvert design. For unsubmerged flow conditions the difference in the hydraulic performance curves and headloss coefficients for PC and CIP culverts are within the experimental uncertainty. Larger differences (specified by the study) are found for submerged conditions when the flow is increasingly constricted at the entrance in the culvert. The observed differentiation is less important for multi-barrel culverts as the influence of the wingwalls decreases with the increase of the number of barrels.
Resumo:
This report, the Full Report, is the culmination of the Task Force’s responsibilities as set out in Executive Order 5, dated October 30, 2007. The Executive Order specifies a number of goals and report requirements.There is a commonly held perception that the use of detention may serve as a deterrent to future delinquency. Data in this report reflect that approximately 40% of youth detained in 2006 were re-detained in 2006. Research conducted by national experts indicates that, particularly for low risk/low level offenders, that the use of detention is not neutral, and may increase the likelihood of recidivism. Comparable data for Iowa are not available (national data studied for this report provide level of risk, but risk level related to detention is not presently available for Iowa). The Task Force finds no evidence suggesting that recidivism levels (as related to detention risk) in Iowa should be different than found in other states. Data in this report also suggest that detention is one of the juvenile justice system’s more costly sanctions ($257 - $340 per day). Other sites and local jurisdictions have been able to redirect savings from the reduced use of juvenile detention to support less costly, community-based detention alternatives without compromising public safety.
Resumo:
Iowa Code Section 216A.135 requires the Criminal and Juvenile Justice Planning Advisory Council (CJJPAC) to submit a long-range plan for Iowa's justice system to the Governor and General Assembly every five years. The Criminal and Juvenile Justice Advisory Council directed that the 2005 plan be developed with input from the public. A public hearing was held in September 2004, utilizing the Iowa Communications Network at 5 sites across Iowa. Using the information gained, the Council developed new goals and strategies and modified others from the 2000 plan. The 2005 Long Range Goals for Iowa’s Criminal and Juvenile Justice Systems, organized as follows, are meant to facilitate analyses and directions for justice system issues and concerns in Iowa.
Resumo:
We report a new set of nine primer pairs specifically developed for amplification of Brassica plastid SSR markers. The wide utility of these markers is demonstrated for haplotype identification and detection of polymorphism in B. napus, B. nigra, B. oleracea, B. rapa and in related genera Arabidopsis, Camelina, Raphanus and Sinapis. Eleven gene regions (ndhB-rps7 spacer, rbcL-accD spacer, rpl16 intron, rps16 intron, atpB-rbcL spacer, trnE-trnT spacer, trnL intron, trnL-trnF spacer, trnM-atpE spacer, trnR-rpoC2 spacer, ycf3-psaA spacer) were sequenced from a range of Brassica and related genera for SSR detection and primer design. Other sequences were obtained from GenBank/EMBL. Eight out of nine selected SSR loci showed polymorphism when amplified using the new primers and a combined analysis detected variation within and between Brassica species, with the number of alleles detected per locus ranging from 5 (loci MF-6, MF-1) to 11 (locus MF-7). The combined SSR data were used in a neighbour-joining analysis (SMM, D (DM) distances) to group the samples based on the presence and absence of alleles. The analysis was generally able to separate plastid types into taxon-specific groups. Multi-allelic haplotypes were plotted onto the neighbour joining tree. A total number of 28 haplotypes were detected and these differentiated 22 of the 41 accessions screened from all other accessions. None of these haplotypes was shared by more than one species and some were not characteristic of their predicted type. We interpret our results with respect to taxon differentiation, hybridisation and introgression patterns relating to the 'Triangle of U'.
Resumo:
Podeu consultar el document complet de la "XVI Setmana de Cinema Formatiu" a: http://hdl.handle.net/2445/22523
Resumo:
Podeu consultar el document complet de la "XVI Setmana de Cinema Formatiu" a: http://hdl.handle.net/2445/22523
Resumo:
Podeu consultar el document senser de la "XVI Setmana de Cinema Formatiu" a: http://hdl.handle.net/2445/22523
Resumo:
El comentari crític de set obres sobre retòrica i persuasió, publicades recentment, ofereix una visió de diverses perspectives teòriques i també de les aplicacions a situacions comunicatives específiques. Les obres són El arte de hablar , de José Antonio Hernández Guerrero i María del Carmen García Tejera; Retórica , de Giambattista Vico, editada per primera vegada en castellà; 40 jocs per parlar català , de Jacqueline Jacquet, Sílvia Casulleras, Núria Mirabet; Acròbates de l'emoció , d'Amadeu Viana; Tres finestres obertes al món de la comunicació , de Ricard Morant i Miquel Peñarroya; El lenguaje de la negociación , de Joan Mulholland; i Tècniques de negociació i resolució de conflictes , de Carles Mendieta i Suñé.
Resumo:
The large volume of traffic on the interstate system makes it difficult to make pavement repairs. The maintenance crew needs 4-5 hours to break out the concrete to be replaced and prepare the hole for placing new concrete. Because of this it is usually noon before the patch can be placed. Since it is desirable to remove the barricades before dark there are only 7-8 hours for the concrete to reach the required strength. There exists a need for a concrete that can reach the necessary strength (modulus of rupture = 500 psi) in 7-8 hours. The purpose of this study is to determine if type III cement and/or an accelerator can be used in an M-4 mix to yield a fast setting patch with very little shrinkage. It is recognized that calcium chloride is a corrosive material and may therefore have detrimental effects upon the reinforcing steel. The study of these effects, however, is beyond the scope of this investigation.