Avaliação dos distúrbios metabólicos de pacientes obesas, grau III, antes e depois da cirurgia bariátrica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The Relationship between Biofilm and Physical-Chemical Properties of Implant Abutment Materials for Successful Dental Implants

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Implications of Surface and Bulk Properties of Abutment Implants and Their Degradation in the Health of Periodontal Tissue

The aim of the current review was to investigate the implications of the surface and bulk properties of abutment implants and their degradation in relation to periodontal health. The success of dental implants is no longer a challenge for dentistry. The scientific literature presents several types of implants that are specific for each case. However, in cases of prosthetics components, such as abutments, further research is needed to improve the materials used to avoid bacterial adhesion and enhance contact with epithelial cells. The implanted surfaces of the abutments are composed of chemical elements that may degrade under different temperatures or be damaged by the forces applied onto them. This study showed that the resulting release of such chemical elements could cause inflammation in the periodontal tissue. At the same time, the surface characteristics can be altered, thus favoring biofilm development and further increasing the inflammation. Finally, if not treated, this inflammation can cause the loss of the implant.

Eight-Year Follow-Up of a Fixed-Detachable Maxillary Prosthesis Utilizing an Attachment System: Clinical Protocol for Individuals With Skeletal Class III Malocclusions

The aim of this article is to describe a successful clinical protocol for prosthodontic rehabilitation of a patient with a skeletal Class III malocclusion using a fixed-detachable maxillary prosthesis supported by 6 implants and the MK1 attachment system. The patient was followed up for 8 years. A 46-year-old edentulous woman with a skeletal Class III malocclusion expressed dissatisfaction with her old existing maxillary denture from an esthetic point of view and frustration regarding its function. A fixed-detachable maxillary prosthesis using the MK1 attachment system was made. The patient was followed up clinically and radiographically for 8 years. No bone loss, fracture of prosthetic components, or fracture of the prosthesis was detected in that period. A fixed detachable maxillary prosthesis using the MK1 attachment system is a treatment option for patients with Class III malocclusions who opt not to undergo orthognathic surgery.

Use of a type IIB external skeletal fixator in experimental tarsocrural arthrodesis in dogs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comportamento de indivíduos com doença de Parkinson no levantar da cadeira e no início da marcha: relações com o envelhecimento

Large motor dysfunctions are observed in older adults with the age advance. Parkinson’s disease (PD) patients have motor deficits to perform daily living activities. To raise from a chair, a daily task necessary to live independently, requires both large muscle recruitment and large joint range of motion to achieve the vertical position safely. Normally, we initiate gait after raise from a chair. The aim of this study was to analyze the PD patients’ behavior when rising from a chair and initiating gait and to compare it according to the age advance. In order to do that, 23 PD patients (66.61±7.64 years old) were distributed in three age groups: Young group, between 51 and 60 years of age (n=7); intermediary group, between 61 and 70 years of age (n=7); and elderly group, over 70 years of age (n=9). There were no statistical differences among groups either for the disease evolution stage or for it compromising. The task was to stand from a chair and to initiate gait forward in three attempts. The dependent variables were: spatial and temporal (first step length and duration, and stride length, duration and velocity) and angular (flexion and extension of head, shoulder, hip, knee, and ankle). The motion of standing from a chair was divided in two phases. The data was statistically treated by means of Analyses of Variance with group as the only factor. The Scheffé’s post hoc test was used to localize differences among groups and the significance level was adjusted to p≤0.017. There were statistical differences for stride...(Complete abstract click electronic access below)

A combined approach for the treatment of resorbed fresh sockets allowing immediate implant restoration: a 2-year follow-up

Introduction: The demand for optimal esthetics has increased with the advance of the implant dentistry and with the desire for easier, safer and faster technique allowing predictable outcomes. Thus, the aim of this case report was to describe a combined approach for the treatment of a periodontally compromised tooth by means of atraumatic tooth extraction, immediate flapless implant placement, autogenous block and particulate bone graft followed by connective tissue graft and immediate provisionalization of the crown in the same operatory time. Case Report: A 27-year-old woman underwent the proposed surgical procedures for the treatment of her compromised maxillary right first premolar. The tooth was removed atraumatically with a periotome without incision. A dental implant was inserted 3 mm apical to the cement-enamel junction of the adjacent teeth enabling the ideal tridimensional implant position. An osteotomy was performed in the maxillary tuber for block bone graft harvesting that allowed the reconstruction of the alveolar buccal plate. Thereafter, an autogenous connective tissue graft was placed to increase both the horizontal and vertical dimensions of the alveolar socket reaching the patient functional and esthetic expectations. Conclusion: This treatment protocol was efficient to create a harmonious gingival architecture with sufficient width and thickness, maintaining the stability of the alveolar bone crest yielding excellent aesthetic results after 2-years of follow-up. We suggest that this approach can be considered a viable alternative for the treatment of periodontally compromised tooth in the maxillary esthetic area enhancing patient comfort and satisfaction.

Importância do tratamento estético periodontal na reabilitação protética

Gingival recession is a common deformity that affects a large number of people. This condition is frequently associated with esthetic complains and may lead to dental hypersensitivity. Thus, various surgical procedures have been proposed to provide root coverage. Since the 1950s, free and pedicle gingival grafts have been greatly used for treating gingival recession. However, after the 1985 Miller gingival recession classification, and with the development of other appropriated techniques that use subepithelial connective tissue grafts, gingival recession treatments have resulted in more predictable outcomes, especially with respect to Class I and II sites, i.e., in the absence of interproximal bone loss. This article reported the importance of aesthetical periodontal treatment in the prosthetic rehabilitation of a patient with a class I gingival recession with 3 mm of vertical extension in the superior canine. The treatment plan consisted of root coverage using subepithelial connective tissue graft (SCTG) associated with construction of new prosthesis.

Effect of the association between the tray and impression techniques on angulated implants using the All-on-Four system

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of splinting in accuracy of two implants impression techniques

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Correction of malpositioned implants through periodontal surgery and prosthetic rehabilitation using angled abutment

When dental implants are malpositioned in relation to the adjacent teeth and alveolar bone or in an excessive buccal or lingual position, the final prosthesis rehabilitation impairs the peri-implant health of the gingival tissues and the aesthetics of the patient. Thus, the purpose of this case was to report and discuss a multidisciplinary protocol for the treatment of a compromised maxillary tooth in a patient with an abscess in his right central incisor due to an excessive buccal implant position. The patient presented with an implant-supported provisional restoration on his right maxillary central incisor and a traumatic injury in his left central incisor. The treatment protocol consisted in (i) abutment substitution to compensate the incorrect angulation of the implant, (ii) clinical crown lengthening, (iii) atraumatic extraction of the left central incisor, and (iv) immediate implant placement. Finally, (v) a custom abutment was fabricated to obtain a harmonious gingival contour around the prosthetic crown. In conclusion, when implants are incorrectly positioned in relation to the adjacent teeth, associated with soft-tissue defects, the challenge to create a harmonious mucogingival contours may be achieved with an interdisciplinary approach and with the placement of an appropriate custom abutment.

Aesthetic rehabilitation of a complicated crown-root fracture of the maxillary incisor: combination of orthodontic and implant treatment

The aim of this paper is to present a complex rehabilitation, of fractured tooth, with implants in anterior region considering the orthodontics extrusion to clinical success. At 7 years old, the patient fractured the maxillary left central incisor and the dentist did a crown with the fragment. Twenty years later, the patient was referred to a dental clinic for orthodontic treatment, with the chief complaint related to an accentuated deep bite, and a professional started an orthodontic treatment. After sixteen months of orthodontic treatment, tooth 21 fractured. The treatment plan included an orthodontic extrusion of tooth 21 and implant placement. This case has been followed up and the clinical and radiographic examinations show excellence esthetic results and satisfaction of patient. The forced extrusion can be a viable treatment option in the management of crown root fracture of an anterior tooth to gain bone in a vertical direction. This case emphasizes that to achieve the esthetic result a multidisciplinary approach is necessary.

Importância do tratamento estético periodontal na reabilitação protética

Gingival recession is a common deformity that affects a large number of people. This condition is frequently associated with esthetic complains and may lead to dental hypersensitivity. Thus, various surgical procedures have been proposed to provide root coverage. Since the 1950s, free and pedicle gingival grafts have been greatly used for treating gingival recession. However, after the 1985 Miller gingival recession classification, and with the development of other appropriated techniques that use subepithelial connective tissue grafts, gingival recession treatments have resulted in more predictable outcomes, especially with respect to Class I and II sites, i.e., in the absence of interproximal bone loss. This article reported the importance of aesthetical periodontal treatment in the prosthetic rehabilitation of a patient with a class I gingival recession with 3 mm of vertical extension in the superior canine. The treatment plan consisted of root coverage using subepithelial connective tissue graft (SCTG) associated with construction of new prosthesis.

Técnica estrutural: confecção de pilar personalizado cerâmico para otimizar a estética

Na reabilitação protética com implantes, a reconstituição das características anatômicas do tecido peri-implantar é fundamental para a obtenção de uma estética ótima. Como os componentes metálicos não transmitem a luz, fazem com que os pacientes com fenótipos gengivais finos apresentem uma coloração escurecida, resultante da limitação estética desses componentes. Pilares cerâmicos (alumina ou zircônia) têm sido utilizados para resolver esse problema, os quais possibilitam a complementação com próteses metal free. A indústria fornece, para alguns sistemas, componentes pré-fabricados cerâmicos a serem personalizados por desgastes e componentes personalizados confeccionados com sistemas CAD/CAM e CAD/MAN. Tendo em vista as limitações de algumas das conexões desses componentes, o objetivo desse estudo é apresentar a técnica laboratorial para confecção de um pilar personalizado cerâmico realizado sobre pilar UCLA de sobrefundição. Concluiu-se que a utilização da cerâmica feldspática proporciona ótima estética, boa transparência, resistência mecânica, baixo custo, melhor capacidade adesiva, com utilização de cimentos resinosos, e, principalmente, técnica de amplo domínio dos laboratórios.