g-C3N4/NaTaO3 organic–inorganic hybrid nanocomposite:high-performance and recyclable visible light driven photocatalyst

Novel g-C3N4/NaTaO3 hybrid nanocomposites have been prepared by a facile ultrasonic dispersion method. Our results clearly show the formation of interface between NaTaO3 and g-C3N4 and further loading of g-C3N4 did not affect the crystal structure and morphology of NaTaO3. The g-C3N4/NaTaO3 nanocomposites exhibited enhanced photocatalytic performance for the degradation of Rhodamine B under UV–visible and visible light irradiation compared to pure NaTaO3 and Degussa P25. Interestingly, the visible light photocatalytic activity is generated due to the loading of g-C3N4. A mechanism is proposed to discuss the enhanced photocatalytic activity based on trapping experiments of photoinduced radicals and holes. Under visible light irradiation, electron excited from the valance band (VB) to conduction band (CB) of g-C3N4 could directly inject into the CB of NaTaO3, making g-C3N4/NaTaO3 visible light driven photocatalyst. Since the as-prepared hybrid nanocomposites possess high reusability therefore it can be promising photocatalyst for environmental applications.

Hierarchical ZnO “rod like” architecture synthesized via reverse micellar route for improved photocatalytic activity

Hierarchical ZnO “rod like” architecture was successfully synthesized via reverse micellar route and characterized by various techniques. The FESEM studies show controlled decomposition of zinc oxalate into ZnO “rod like” architecture at 500 °C with slow heat rate at 1°/min. Interestingly, improved photocatalytic activity was observed for the degradation of Rhodamine B, due to the self assembly of hexagonal nanoparticles of zinc oxide forming hierarchical ZnO “rod like” architecture which can greatly enhance the light utilization rate due to its special architecture and enlarge the specific surface area, providing more reaction sites and promoting mass transfer. More importantly, the reusability studies of this architecture were most economical.

Synthesis of magnetically separable and recyclable g‑C3N4−Fe3O4 hybrid nanocomposites with enhanced photocatalytic performance under visible-light irradiation

Herein we demonstrate a facile, reproducible, and template-free strategy to prepare g-C3N4–Fe3O4 nanocomposites by an in situ growth mechanism. The results indicate that monodisperse Fe3O4 nanoparticles with diameters as small as 8 nm are uniformly deposited on g-C3N4 sheets, and as a result, aggregation of the Fe3O4 nanoparticles is effectively prevented. The as-prepared g-C3N4–Fe3O4 nanocomposites exhibit significantly enhanced photocatalytic activity for the degradation of rhodamine B under visible-light irradiation. Interestingly, the g-C3N4–Fe3O4 nanocomposites showed good recyclability without loss of apparent photocatalytic activity even after six cycles, and more importantly, g-C3N4–Fe3O4 could be recovered magnetically. The high performance of the g-C3N4–Fe3O4 photocatalysts is due to a synergistic effect including the large surface-exposure area, high visible-light-absorption efficiency, and enhanced charge-separation properties. In addition, the superparamagnetic behavior of the as-prepared g-C3N4–Fe3O4 nanocomposites also makes them promising candidates for applications in the fields of lithium storage capacity and bionanotechnology.

Foraminiferal faunal estimates of paleotemperature: Circumventing the no-analog problem yields cool ice age tropics

The sensitivity of the tropics to climate change, particularly the amplitude of glacial-to-interglacial changes in sea surface temperature (SST), is one of the great controversies in paleoclimatology. Here we reassess faunal estimates of ice age SSTs, focusing on the problem of no-analog planktonic foraminiferal assemblages in the equatorial oceans that confounds both classical transfer function and modern analog methods. A new calibration strategy developed here, which uses past variability of species to define robust faunal assemblages, solves the no-analog problem and reveals ice age cooling of 5° to 6°C in the equatorial current systems of the Atlantic and eastern Pacific Oceans. Classical transfer functions underestimated temperature changes in some areas of the tropical oceans because core-top assemblages misrepresented the ice age faunal assemblages. Our finding is consistent with some geochemical estimates and model predictions of greater ice age cooling in the tropics than was inferred by Climate: Long-Range Investigation, Mapping, and Prediction (CLIMAP) [1981] and thus may help to resolve a long-standing controversy. Our new foraminiferal transfer function suggests that such cooling was limited to the equatorial current systems, however, and supports CLIMAP's inference of stability of the subtropical gyre centers.

Estudo da participação das espécies fortemente oxidantes produzidas durante a oxidação eletroquímica de corantes usando eletrodo de diamante dopado com boro: função das propriedades eletroquímicas do eletrodo e condições experimentais

The textile industry is one of the most polluting in the world (AHMEDCHEKKAT et al. 2011), generating wastewater with high organic loading. Among the pollutants present in these effluents are dyes, substances with complex structures, toxic and carcinogenic characteristics, besides having a strong staining. Improper disposal of these substances to the environment, without performing a pre-treatment can cause major environmental impacts. The objective this thesis to use a technique of electrochemical oxidation of boron doped diamond anode, BDD, for the treatment of a synthetic dye and a textile real effluent. In addition to studying the behavior of different electrolytes (HClO4, H3PO4, NaCl and Na2SO4) and current densities (15, 60, 90 and 120 mA.cm-2 ), and compare the methods with Rhodamine B (RhB) photolysis, electrolysis and photoelectrocatalytic using H3PO4 and Na2SO4. Electrochemical oxidation studies were performed in different ratio sp3 /sp2 of BDD with solution of RhB. To achieve these objectives, analysis of pH, conductivity, UV-visible, TOC, HPLC and GC-MS were developed. Based on the results with the Rhodamine B, it was observed that in all cases occurred at mineralization, independent of electrolyte and current density, but these parameters affect the speed and efficiency of mineralization. The radiation of light was favorable during the electrolysis of RhB with phosphate and sulfate. Regarding the oxidation in BDD anode with different ratio sp3 /sp2 (165, 176, 206, 220, 262 e 329), with lower carbon-sp3 had a longer favoring the electrochemical conversion of RhB, instead of combustion. The greater the carbon content on the anodes BDD took the biggest favor of direct electrochemical oxidation

Estudo da eficiência dos adsorventes de Al2O3 e Fe/Al2O3 para remoção de BTX presente em água contaminada com gasolina

Contamination of groundwater by BTX has been featured in recent decades. This type of contamination is due to small and continuous leaks at gas stations, causing serious problems to public health and the environment. Based on these antecedents, the search for new alternatives for treating contaminated water is shown to be essential. Therefore, this study aimed to evaluate the efficiency of removal of BTX by adsorption processes employing commercial alumina (Al2O3) and alumina supported with iron (Fe/Al2O3) as adsorbents. It was prepared by a in a synthetic gasoline solution and distilled water to simulate an actual sample. Initially, the adsorbents were characterized by techniques XRD, TG / DTG, XRF, FTIR and SEM/EDS, several trials, where he was placed synthetic solution to react in the presence of Al2O3 and Fe/Al2O3 in a closed, mechanical stirring system were performed varying the catalyst concentration 2, 4 and 6 g.L-1 every 0, 10, 30 60, 90 and 120 min, aliquots were taken and brought to analysis by gas chromatography flame ionization with headspace extraction. The results indicated that the absorbent which has higher BTX removal capacity was the Fe/Al2O3 at a concentration of 6 g.L-1, pH = 4 and time of 90 minutes reaction, resulting in an efficiency, resulting in a 86,5% efficiency for benzene removal, for the 95,4% toluene, 90,8% for ɱ,ρ- xylene and 93.7% for the θ-xylenes. Subsequently, we performed a kinetic study of the reactions, the values of experimental adsorption capacity (qe) showed agreement with the values of the theoretical adsorption capacity (qc) to the pseudo-second-order model in the adsorption tests using 2 and 6 gL-1 of Al2O3 and assays using 2, 4 and 6 g.L-1 of Fe/Al2O3. A fact corroborated by the R2 values, thus indicating that the chemical interactions are present in the adsorption mechanisms of BTX.

Annotated record of the detailed examination of Mn deposits from RISEPAC Expedition stations

The cores and dredges described in this report were taken on the RISEPAC Expedition from October 1961 until February 1962 by the Scripps Institution of Oceanography from the R/V Spencer F. Baird. A total of 164 cores and dredges were recovered and are available at Scripps for sampling and study.

Annotated record of the detailed examination of Mn deposits from the R/V Argo ZETES Expedition in the Pacific Ocean

The cores and dredges described are taken during the R/V Argo ZETES Expedition from March until August 1966 by the Scripps Institute of Oceanography. A total of 53 cores and dredges were recovered and are available at Scripps Institute of Oceanography for sampling and study.

The application of a novel, cell permeable activity-based probe for the detection of cysteine cathepsins.

Cysteine cathepsins, such as cathepsin S (CTSS), are implicated in the pathology of a wide range of diseases and are of potential utility as diagnostic and prognostic biomarkers. In previous work, we demonstrated the potency and efficiency of a biotinylated diazomethylketone (DMK)-based activity-based probe (ABP), biotin-PEG-LVG-DMK, for disclosure of recombinant CTSS and CTSS in cell lysates. However, the limited cell permeability of both the biotin and spacer groups restricted detection of CTSS to cell lysates. The synthesis and characterisation of a cell permeable ABP to report on intracellular CTSS activity is reported. The ABP, Z-PraVG-DMK, a modified peptidyl diazomethylketone, was based on the N-terminus of human cystatin motif (Leu-Val-Gly). The leucine residue was substituted for the alkyne-bearing proparcylglycine to facilitate conjugation of an azide-tagged reporter group using click chemistry, following irreversible inhibition of CTSS. When incubated with viable Human Embryonic Kidney 293 cells, Z-PraVG-DMK permitted disclosure of CTSS activity following cell lysis and rhodamine azide conjugation, by employing standard click chemistry protocols. Furthermore, the fluorescent tag facilitated direct detection of CTSS using in-gel fluorescent scanning, obviating the necessity for downstream biotin-streptavidin conjugation and detection procedures.

National Diet and Nutrition Survey: assessment of dietary sodium in adults (19 to 64 years) in England, 2014

There is an established relationship between salt intake and risk of high blood pressure (BP). High blood pressure (hypertension) is a risk factor for cardiovascular disease (CVD) and scientific evidence shows that a high salt intake can contribute to the development of elevated blood pressure. The Scientific Advisory Committee on Nutrition (SACN) recommend a target reduction in the average salt intake of the population to no more than 6g per day. This figure has been adopted by the UK government as the recommended maximum salt intake for adults and children aged 11 years and over. Following publication of the SACN report in 2003, the government began a programme of reformulation work with the food industry aimed at reducing the salt content of processed food products. Voluntary salt reduction targets were first set in 2006, and subsequently in 2009, 2011 and 2014, for a range of food categories that contribute the most to the population’s salt intakes. Population representative urinary sodium data were collected in England in 2005-06, 2008 (UK), 2011 and 2014. In the latest survey assessment, estimated salt intake of adults aged 19 to 64 years in England was assessed from 24-hour urinary sodium excretion of 689 adults, selected to be representative of this section of the population. Estimated salt intake was calculated using the equation 17.1mmol of sodium = 1g of salt and assumes all sodium was derived from salt. The data were validated as representing daily intake by checking completeness of the urine collections by the para-amino benzoic acid (PABA) method. Urine samples were collected over five months (May to September) in 2014, concurrently with a similar survey in Scotland. This report presents the results for the latest survey assessment (2014) and a new analysis of the trend in estimated salt intake over time. The trend analysis is based on data for urinary sodium excretion from this survey and previous sodium surveys (including data from the National Diet and Nutrition Survey Rolling Programme (NDNS RP) Years 1 to 5) carried out in England over the last ten years, between 2005-06 and 2014. This data has been adjusted to take account of biases resulting from differences between surveys in laboratory analytical methods used for sodium. The analysis provides a revised assessment of the trend in estimated salt intake over time. The trend analysis in this report supersedes the trend analysis published in the report of the 2011 England urinary sodium survey.

Invertebrados aquáticos no detrito de Salvinia herzogii de la Sota em lagos rasos do sul do Brasil

A colonização por invertebrados aquáticos no detrito de Salvinia herzogii foi estudada em dois lagos rasos subtropicais de diferentes estados tróficos (eutrófico e oligotrófico) localizados no campus Carreiros da Universidade Federal do Rio Grande, extremo sul do Brasil. Aproximadamente 6g (peso úmido) de S. herzogii foram incubados em experimentos com litter bags (30 X 20 cm com 10 mm de malha) e a decomposição do detrito acompanhada durante 110 dias (entre setembro de 2008 e janeiro de 2009), período no qual o detrito decompôs-se cerca de 95%. Quatro réplicas foram retiradas após os intervalos de 1, 30, 60, 90 e 110 dias de incubação e o detrito foi limpo em água corrente sob peneira de 250µm de malha para que fossem retidos os organismos e depois fixados em álcool 80%. As plantas depois de limpas foram secas à 60ºC por 72 horas para obtenção do peso seco, depois trituradas, para as análises de nitrogênio e fósforo total e para obtenção do peso seco livre de cinzas, equivalente a porcentagem de massa remanescente (%R). Os invertebrados foram identificados até o menor nível taxonômico possível e depositados na coleção de Invertebrados Límnicos – ICB - FURG. Para cada amostra foram calculadas a riqueza e a densidade de táxons, os índices de diversidade de Shannon - Wiener (H’), homogeneidade de Pielou (J). Para determinar qual grupo de invertebrados foi mais importante para a estruturação da comunidade em cada lago, foi realizada a análise de espécies indicadoras (indicator especies analysis). Um total de 32.399 organismos distribuídos em 38 táxons foram registrados para os lagos estudados. Dezoito táxons foram comuns entre os lagos em cada experimento. Um total de 1.449.612 ind. 100g PS no ambiente eutrófico e 372.380 ind. 100g PS para o ambiente oligotrófico foi registrado (p=0,4771). O táxon mais abundante encontrado para o lago eutrófico foi Goeldichironomus (Chironomidae; 81% de todos os organismos coletados), enquanto queno lago oligotrófico, o táxon mais abundante foi Caenis (Caenidae; 29,1% de todos os organismos coletados). A colonização do detrito foi rápida, nas primeiras 24 horas foram registrados 10 táxons nos lagos eutrófico e oligotrófico, sendo os predadores o grupo dominante (52 e 70%, respectivamente) neste período. Durante o período do experimento,no lago eutrófico, os coletores-catadores foram os mais abundantes (91,2 % do número total de organismos), seguido de coletores-filtradores (4,7 %) e predadores (3,5 %). No lago oligotrófico, os coletores-catadores foram os mais abundantes (34,1 % do número total de organismos), seguido de predadores (26,8 %), raspadores (24,9 %) e fragmentadores (10,5 %). O Índice de diversidade acompanhou os aumentos de densidade durante os experimentos, sendo que o valor máximo observado foi no lago oligotrófico(H’=2,31) no 60º dia de incubação, enquanto que o menor valor foi registrado para o lago eutrófico (H’=0,19) no 110º dia de incubação. A taxa de decomposição de S. herzogii foi diferente no lago eutrófico (k = 0,019; R2 = 0,88) e oligotrófico (k = 0,021; R2 = 0,81),porém essa diferença não foi significativa (ANCOVA; F = 6,38 e p = 0,6755).

Superparamagnetic Liposomes for MRI Monitoring and External Magnetic Field-Induced Selective Targeting of Malignant Brain Tumors

International audience

Células de anêmonas Bunodosoma cangicum expostas ao cobre: citotoxidade, defesa e dano de DNA

Anêmonas-do-mar são pólipos solitários, bentônicos, de pouca mobilidade, que habitam regiões entre-marés. Devido a estas características, são organismos que podem ser atingidos diretamente pela poluição aquática, no entanto, são pouco utilizados como modelo ecotoxicológico. O cobre é um metal essencial, que em altas concentrações pode ser tóxico, sendo bastante comum em ecossistemas marinhos. Um dos mecanismos de toxicidade do cobre envolve a produção de espécies reativas de oxigênio (ERO), podendo levar as células ao estresse oxidativo, que tem como característica danos celulares, inclusive no DNA. Muitos organismos possuem um mecanismo que bombeia os xenobióticos para fora da célula – multixenobiotic resistance (MXR) – que visa prevenir as células dos danos tóxicos causados pelo contaminante. Com isso, o presente trabalho estudou a capacidade de defesa e dano ao DNA à toxicidade causada pelo cobre em células de anêmonas Bunodosoma cangicum. Para isto, células de anêmonas, mantidas em cultura primária através de explante do disco podal, foram expostas ao cobre a duas concentrações (7,8 µg.L-1 Cu e 15,6 µg.L-1 Cu), além do grupo controle, por 6 e 24 h. Antes e após as exposições as células tiveram sua viabilidade avaliada através do método de exclusão por azul de tripan (0,08%) para analisar a citotoxicidade. Parâmetros como a indução do mecanismo MXR através do método de acúmulo de rodamina-B, espécies reativas de oxigênio e ensaio cometa, também foram avaliados. Os resultados obtidos mostram que o cobre é citotóxico, sendo constatada uma queda na viabilidade e no número de células, principalmente após 24 h de exposição, sendo que na concentração de cobre de 15,6 µg.L-1 , foi possível observar uma diminuição de 40% na viabilidade e uma redução em 36% no número de células (p < 0,05, n = 6). Em relação ao fenótipo MXR, foi observada uma ativação do mecanismo apenas naquelas células expostas ao cobre 7,8 µg.L-1 (53%) no tempo de 24 h (p < 0,05, n = 5). Na análise da geração de ERO foi observado um aumento de 11,5% naquelas células expostas por 6 h na concentração mais alta de cobre 15,6 µg.L-1 . Nas células que foram expostas por 24 h, o aumento de espécies reativas pode ser percebido já na concentração de 7,8 µg.L-1 , elevando-se para cerca de 20% quando exposto a 15,6 µg.L-1 (p < 0,05, n = 4-5). Quanto ao dano de DNA, foram vistas quebras na molécula desde 7,8 µg.L-1 Cu em 6 h, com danos ainda mais salientes naquelas células expostas por 24 h, na concentração de 7,8 µg.L -1 Cu (p < 0,05, n = 3-4), e para 15,6 µg.L-1 Cu a viabilidade celular (número de células) não permitiu a análise. Com base nestes dados, pode-se dizer que o cobre, mesmo em baixas concentrações causa estresse em células de B. cangicum, sendo citotóxico. Este metal causa estresse oxidativo com dano à molécula de DNA mesmo com a ativação do mecanismo de defesa.

Desenvolvimento de nanosistemas farmacêuticos para terapia gênica

Gene therapy is one of the major challenges of the post-genomic research and it is based on the transfer of genetic material into a cell, tissue or organ in order to cure or improve the patient s clinical status. In general, gene therapy consists in the insertion of functional genes aiming substitute, complement or inhibit defective genes. The achievement of a foreigner DNA expression into a population of cells requires its transfer to the target. Therefore, a key issue is to create systems, vectors, able to transfer and protect the DNA until it reaches the target. The disadvantages related to the use of viral vectors have encouraged efforts to develop emulsions as non-viral vectors. In fact, they are easy to produce, present suitable stability and enable transfection. The aim of this work was to evaluate two different non-viral vectors, cationic liposomes and nanoemulsions, and the possibility of their use in gene therapy. For the two systems, cationic lipids and helper lipids were used. Nanoemulsions were prepared using sonication method and were composed of Captex® 355; Tween® 80; Spam® 80; cationic lipid, Stearylamine (SA) or 1,2-dioleoyl-3-trimethylammoniumpropane (DOTAP) and water (Milli-Q®). These systems were characterized by average droplet size, Polidispersion Index (PI) and Zeta Potential. The stability of the systems; as well as the DNA compaction capacity; their cytotoxicity and the cytotoxicity of the isolated components; and their transfection capacity; were also evaluated. Liposomes were made by hydration film method and were composed of DOTAP; 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), containing or not Rhodaminephosphatidylethanolamine (PE- Rhodamine) and the conjugate Hyaluronic Acid DOPE (HA-DOPE). These systems were also characterized as nanoemulsions. Stability of the systems and the influence of time, size of plasmid and presence or absence of endotoxin in the formation of lipoplexes were also analyzed. Besides, the ophthalmic biodistribution of PE-Rhodamine containing liposomes was studied after intravitreal injection. The obtained results show that these systems are promising non-viral vector for further utilization in gene therapy and that this field seems to be very important in the clinical practice in this century. However, from the possibility to the practice, there is still a long way

Desempenho produtivo de Pseudoplatystoma corruscans estocados em sistemas de criação: semi-intensivo (viveiro escavado) e intensivo (tanque-rede)

Objetivou-se comparar o desempenho produtivo e custos de produção de exemplares de pintado, Pseudoplatystoma corruscans, estocados em dois sistemas de criação: semi-intensivo (viveiro escavado, VE) e intensivo (tanque-rede, TR). Trezentos (300) peixes, com um ano de idade, foram estocados, sendo 150 em um VE (médias de peso e comprimento: 1,48±0,46kg e 57,31±6,42cm) e 150 divididos em três TR (médias de peso e comprimento: 1,27±0,34kg e 55,05±4,11cm). Foram alimentados com ração extrusada de 15mm (diâmetro) 40% PB e 3110kcal ED kg-1, ajustada mensalmente à quantidade de ração. Os parâmetros físico-químicos da água, observados durante o experimento, foram temperatura = 24,08°C±3,23; pH=6,89±0,39 e oxigênio dissolvido = 7,57±0,97mg L-1. Os reultados obtidos dos valores médios finais dos comprimentos (VE=74,07±4,34cm; TR=70,33±5,02cm) e pesos dos peixes (VE=3,41±0,58kg e TR=2,94±0,60kg) indicaram desempenho semelhante nos dois sistemas. As médias do fator de condição (0,09-0,036); ganho em peso diário (9,29g dia-1 - 8,95g dia-1); conversão alimentar (3,09-4,15); consumo total de ração (29,60g dia-1 - 74,16g dia-1); índice de crescimento (0,219-0,215) e sobrevivência (97,33-90,67%) para VE e TR, respectivamente. Houve interação significativa entre os sistemas de criação e mês (P<0,05). O quilo de peixe produzido foi de R$ 8,76 (US$ 2,85) e R$ 8,73 (US$ 2,33) para o VE e TR, respectivamente. Embora o VE tenha demonstrado melhor desenvolvimento durante o período e uma vantagem econômica, o índice de crescimento mostrou que ambos os sistemas tiveram desempenhos semelhantes.