Risk-based decision making method for maintenance policy selection of thermal power plant equipment

This study presents a decision-making method for maintenance policy selection of power plants equipment. The method is based on risk analysis concepts. The method first step consists in identifying critical equipment both for power plant operational performance and availability based on risk concepts. The second step involves the proposal of a potential maintenance policy that could be applied to critical equipment in order to increase its availability. The costs associated with each potential maintenance policy must be estimated, including the maintenance costs and the cost of failure that measures the critical equipment failure consequences for the power plant operation. Once the failure probabilities and the costs of failures are estimated, a decision-making procedure is applied to select the best maintenance policy. The decision criterion is to minimize the equipment cost of failure, considering the costs and likelihood of occurrence of failure scenarios. The method is applied to the analysis of a lubrication oil system used in gas turbines journal bearings. The turbine has more than 150 MW nominal output, installed in an open cycle thermoelectric power plant. A design modification with the installation of a redundant oil pump is proposed for lubricating oil system availability improvement. (C) 2009 Elsevier Ltd. All rights reserved.

High Carbon Ferro-chromium Production by Self-reducing Process: Effects of Fe-Si and Fluxing Agent Additions

The technology of self-reducing pellets for ferro-alloys production is becoming an emerging process due to the lower electric energy consumption and the improvement of metal recovery in comparison with the traditional process. This paper presents the effects of reduction temperature, addition of ferro-silicon and addition of slag forming agents for the production of high carbon ferro-chromium by utilization of self-reducing pellets. These pellets were composed of Brazilian chromium ore (chromite) concentrate, petroleum coke, Portland cement, ferro-silicon and slag forming components (silica and hydrated lime). The pellets were processed at 1 773 K, 1 823 K and 1 873 K using an induction furnace. The products obtained, containing slag and metallic phases, were analyzed by scanning electron microscopy and chemical analyses (XEDS). A large effect on the reduction time was observed by increasing the temperature from 1 773 K to 1 823 K for pellets without Fe-Si addition: around 4 times faster at 1 823 K than at 1 773 K for reaction fraction close to one. However, when the temperature was further increased from 1 823 K to 1 873 K the kinetics improved by double. At 1 773 K, the addition of 2% of ferro-silicon in the pellet resulted in an increasing reaction rate of around 6 times, in comparison with agglomerate without it. The addition of fluxing agents (silica and lime), which form initial slag before the reduction is completed, impaired the full reduction. These pellets became less porous after the reduction process.

Larval activity levels and delayed metamorphosis affect post-larval performance in the colonial, ascidian Diplosoma listerianum

It is becoming widely recognized that extending the larval period of marine invertebrates, especially of species with non-feeding larvae, can affect post-larval performance. As these carry-over effects are presumed to be caused by the depletion of larval energy reserves, we predicted that the level of larval activity would also affect post-larval performance. This prediction was tested with the cosmopolitan colonial ascidian Diplosoma listerianum in field experiments in southern Australia. Diplosoma larvae, brooded in the parent colony, are competent to settle immediately after spawning, and they remain competent to metamorphose for > 15 h. Some larvae were induced to metamorphose 0 to 6 h after release, whilst others were induced to swim actively by alternating light and dark periods for up to 3 h prior to metamorphosis. Juvenile colonies were then transplanted to a subtidal field site in Port Phillip Bay and left to grow for up to 3 wk. Extending the larval period and increasing the amount of swimming both produced carry-over effects on post-larval performance. Colonies survived at different rates among experiments, but larval experience did not affect survival rates. Delays in metamorphosis and increased swimming activity did, however, reduce colony growth rates dramatically, resulting in 50% fewer zooids per colony. Moreover, such colonies produced initial zooids with smaller feeding structures, with the width of branchial baskets reduced by 10 to 15%. These differences in branchial basket size persisted and were still apparent in newly budded zooids 3 wk after metamorphosis. Our results suggest that, for D. listerianum, larval maintenance, swimming, and metamorphosis all use energy from a common pool, and increases in the allocation to maintenance or swimming come at the expense of post-larval performance.

Increased Vascular Permeability, Angiogenesis and Wound Healing Induced by the Serum of Natural Latex of the Rubber Tree Hevea brasiliensis

Increases in vascular permeability and angiogenesis are crucial events to wound repair, tumoral growth and revascularization of tissues submitted to ischemia. An increased vascular permeability allows a variety of cytokines and growth factors to reach the damaged tissue. Nevertheless, the angiogenesis supply tissues with a wide variety of nutrients and is also important to metabolites clearance. It has been suggested that the natural latex from Hevea brasiliensis showed wound healing properties and angiogenic activity. Thus, the purpose of this work was to characterize its angiogenic activity and its effects on vascular permeability and wound healing. The serum fraction of the latex was separated from the rubber with reduction of the pH. The activity of the dialyzed serum fraction on the vascular permeability injected in subcutaneous tissue was assayed according Mile`s method. The angiogenic activity was determined using a chick embryo chorioallantoic membrane assay and its effects on the wound-healing process was determined by the rabbit ear dermal ulcer model. The serum fraction showed evident angiogenic effect and it was effective in enhancing vascular permeability. In dermal ulcers, this material significantly accelerated wound healing. Moreover, the serum fraction boiled and treated with proteases lost these activities. These results are in accordance with the enhancement of wound healing observed in clinical trials carried out with a biomembrane prepared with the same natural latex. Copyright (C) 2009 John Wiley & Sons, Ltd.

Ultrasonographic Evaluation of Achilles Tendon Repair After Percutaneous Sectioning for the Correction of Congenital Clubfoot Residual Equinus

Background: Most cases of congenital clubfoot treated with the Ponseti technique require percutaneous Achilles tenotomy to correct the residual equinus. Clinical evidence suggests that complete healing occurs between the cut tendon stumps, but there have not yet been any detailed studies investigating this reparative process. This study was performed to assess Achilles tendon repair after percutaneous section to correct the residual equinus of clubfoot treated with the Ponseti method. Method: A prospective study analyzed 37 tenotomies in 26 patients with congenital clubfoot treated with the Ponseti technique, with a minimum follow-up of 1 year after the section. The tenotomy was performed percutaneously with a large-bore needle bevel with patient sedation and local anesthesia. Ultrasonographic scanning was performed after section to ascertain that the tenotomy had been completed and to measure the stump separation. In the follow-up period, the reparative process was followed ultrasonographically and assessed at 3 weeks, 6 months, and 1 year posttenotomy. Results: The ultrasonography performed immediately after the procedure showed that in some cases, residual strands between the tendon ends persisted, and these were completely sectioned under ultrasound control. A mean retraction of 5.65 mm +/- 2.26 mm (range, 2.3 to 11.0 mm) between tendon stumps after section was observed. Unusual bleeding occurred in one case and was controlled by digital pressure, with no interference with the final treatment. After 3 weeks, ultrasonography showed tendon repair with the tendon gap filled with irregular hypoechoic tissue, and also with transmission of muscle motion to the heel. Six months after tenotomy, there was structural filling with a fibrillar aspect, mild or moderate hypoechogenicity, and tendon scar thickening when compared with a normal tendon. One year after tenotomy, ultrasound showed a fibrillar structure and echogenicity at the repair site that was similar to a normal tendon, but with persistent tendon scarring thickness. Conclusions: There is a fast reparative process after Achilles tendon percutaneous section that reestablishes continuity between stumps. The reparative tissue evolved to tendon tissue with a normal ultrasonographic appearance except for mild thickening, suggesting a predominantly intrinsic repair mechanism.

Audit and comprehensive health assessment programme in the primary healthcare of adults with intellectual disability: a pilot study

International research has demonstrated significant shortcomings in the health of adults with intellectual disability (ID). Because general practitioners (GPs) are the main providers of primary healthcare for this population, strategies to improve general practice care are an important aspect of rectifying these shortcomings. The present pilot study aimed to determine the effect of various interventions on health maintenance activities and to assess their acceptability to GPs, with a view to informing larger scale studies. The GPs were recruited through an earlier questionnaire-based postal survey. The GPs identified all their adult patients with ID, then obtained consent for participation from three patients randomly selected by the investigators. The GPs completed two self-evaluation forms and case note audits 12 months apart, read a synopsis of the relevant literature provided by the researchers, and completed a comprehensive health assessment (CHA) of their three patients. Forty-five GPs agreed to participate in the CHA programme (CHAP), and 15 completed the project. Thirty-eight patients completed the project. The number of patient-GP dyads who completed the project was too small to demonstrate statistically significant changes in health issues over time. The GPs found that the synopsis of the literature was the best intervention for increasing knowledge and was also the most practical to use in general practice. The CHAP was the intervention that prompted the most action from the GP which would not have been undertaken otherwise. The CHAP appeared to provide a superior review process compared to the other interventions used in the present study. The numbers of health maintenance activities found to be overdue and the number of health issues detected as a result of the process were considerable. The CHAP served as a communication tool and an educative instrument, providing a basis for future studies and strategies to improve the general practice care of adults with ID.

Strange bedfellows: Green Hill Fort, archaeology and tourism

Green Hill Fort, Thursday Islalld was constructed between 1891-1893 to defend the Australian colonies against a feared Russian invasion. It retained an operational role until the 1920.'1 and played a minor role in World /t'ar 2. From 1954 to 1993 the site, but not the facilities, was used as a weather station. More recently it has been home ofthe Ton-es Strait Historical Society and Museum Association museum. It is a major attraction during the tourist season and an important local icon. For archaeologists it has sign~ficance as a relatively intact nineteenth-century military installation. Two 'Centenary of Federation' grants have proVided the impetus to undertake conservation and presentation works involving various task -spec~fic, archaeological activities. At the management level archaeologists play the lead role in the project. The project has demonstrated the value oJarchaeology and tourism joining forces. The danger ofa 'theme park 'presentation has been avoided. Technical accuracy and careful site planning has ensured a high degree ofaccuracy is retained. Provided these qualities can be assured then, it is argued, there is an opportunity for archaeology to be a majOl; long-term beneficiary. But to achieve that, the discipline must move from being entrenched in its academic mould and become Jar more receptive to the broader needs ofthe twentyfirst century.

Cidades sob clichê imagético imaginação espacial e experimentações em poesias visuais

Esse trabalho procurou caracterizar o clichê imagético, articulando-o a exemplos relacionados às cidades provindas de pesquisas iconográficas realizadas no Google Imagens, dando-se, a partir desse contexto, se deram as rasuras dos clichês imagéticos por poesias visuais. A pesquisa iconográfica específica para a palavra “cidades” direcionou o estudo viabilizando a constatação deste clichê, que, por sua vez, foi enunciado como intermediador de imaginação espacial. As constatações empíricas sobre esta temática fez a pesquisa ser conduzida a cinco nomes de capitais brasileiras, que foram contrastadas com as imagens destas cidades caracterizadas fora do clichê imagético, sendo o formato padrão e estático da propagação das imagens foi o universo sobre o qual orbitou este estudo. Uma vez realizadas as observações sobre esta temática, passou-se à discussão poética referente às imagens captadas, e a partir de então foi feito um diálogo com artistas e poetas ao ponto de se delimitar uma justificativa para que poesias visuais fossem elaboradas rumando para outras grafias de mundo, passando, assim, a enfatizar novas possibilidades, para essas imagens identificadas como clichês. Então, este estudo visa possibilitar novas versões a serem produzidas sobre o mundo, optando pela temática “cidade” para melhor categorizar e referenciar a pesquisa iconográfica, direcionando a discussão acerca de espaços e paisagens urbanas. Para tanto, foram adotados os autores Deleuze e Guatarri, articulando seus diálogos com McLuhan e Watson, adentrando-se à dimensão do clichê e aparando-se na iconografia Google e na sua configuração repetida que então passa a evidenciar as características opostas das considerações elaboradas por Doreen Massey, para a imaginação espacial em seu processo fluídico, e não engessado. Pensando nas reverberações de dizeres que se contradizem dessas versões, a imaginação foi evidenciada para além desses processos, atentando-se, assim, às obras poéticas e artísticas de Manoel de Barros ou Valdelino Gonçalves, em que foram verificadas possibilidades de abertura de canais de diálogos com tais clichês, com poesias visuais, em um lançamento para a imaginação, rompendo-os. Em conclusão, foram observadas possibilidades de construções poéticas como dizeres de uma Geografia constituída no imaginário, mas que também possui suas significações perante a realidade, formuladas em rupturas com o dizer totalizante, repetido e homogêneo. Foram evidenciadas, então, essas características como contribuição aos estudos que tangem à temática “Geografia e Imagens”, possibilitando novas reverberações em universos de estudos para essa linha de pesquisa, que procura inovar nas percepções sobre o entendimento das imagens como canal de construção dos espaços geográficos de uma maneira geral.

Eliminação do Cr(VI) na fase de neutralização de um efluente industrial proveniente de processos de galvanoplastia

A presente tese teve por base a identificação e resolução de um problema existente no tratamento de efluentes provenientes dos processos de tratamento de superfícies por galvanoplastia, na OGMA – Indústria Aeronáutica de Portugal S.A.. Observou-se a ocorrência, esporádica, de crómio hexavalente, (Cr (VI)), em valor superior ao valor limite de emissão (VLE). Os resultados foram monitorizados e os dados recolhidos no decorrer da actividade de tratamento de efluentes, durante o período de, aproximadamente, 5 anos (2006 a 2011). A recolha de resultados decorreu no âmbito da actividade profissional da mestranda, que, para além da responsabilidade técnica dos processos de galvanoplastia na empresa, é também responsável pelo suporte técnico ao processo de tratamento de efluentes resultantes da actividade de tratamento de superficies por processos de galvanoplastia. A empresa OGMA – Indústria Aeronáutica de Portugal S.A., é uma empresa de actividade aeronáutica dedicada à Fabricação e Manutenção de aeronaves, nomeadamente a prestação de serviços de Manutenção, Revisão e Modernização de, Aeronaves, Motores e Componentes, bem como Fabricação e Montagem de Aeroestruturas. Integrada na OGMA, S.A. encontra-se a área de tratamentos electroquímicos, onde são realizados processos de tratamento de materiais metálicos por electrodeposição, deposição química e conversão química. Desta actividade resulta uma quantidade considerável de efluentes líquidos que necessitam de tratamento adequado previamente à sua descarga em cursos de água. Devido ao tipo de contaminantes que estes efluentes possuem, o tratamento dos mesmos é realizado em várias etapas, passando pela oxidação de cianetos, a redução de cromatos e a neutralização. Posteriormente segue-se uma sedimentação e a remoção de lamas. De modo a garantir um controlo dos parâmetros de descarga dos efluentes tratados, de acordo com a legislação ambiental em vigor, o efluente obtido é analisado periodicamente em laboratório acreditado. Na perspectiva de solucionar o problema em questão, procedeu-se à realização de ensaios experimentais utilizando os efluentes provenientes dos tanques de reacção da redução de cromatos e da oxidação de cianetos da linha com cádmio, com especial incidência na variação dos intervalos de pH recomendados para cada uma das fases do tratamento de efluentes, e observação do comportamento das misturas em termos de presença de Cr (VI), quando sujeitos a variações de pH. Após análise dos dados disponíveis e realização de todos os ensaios, conclui-se que, o processo de oxidação de cianeto da linha com cádmio e o processo de redução de cromatos na mesma linha estão a funcionar adequadamente. Concluiu-se que o reaparecimento de Cr (VI) ocorre devido à existência de hipoclorito de sódio, em excesso, no tanque de oxidação de cianeto que, quando passa para o tanque de neutralização e entra em contacto com o efluente proveniente do tanque de redução de cromatos, oxida parte do crómio trivalente, (Cr (III)), existente, a Cr (VI). Para impedir a ocorrência deste fenómeno separou-se todo o efluente contendo crómio que passou a ser tratado na linha de tratamento de efluentes isenta de cádmio, não entrando assim em contacto com o efluente que contém hipoclorito não reagido, evitando a oxidação do Cr (III) a Cr (VI).

Projecto de reabilitação e reforço de um túnel ferroviário

As obras de arte e as demais estruturas, são dimensionadas para um tempo de vida útil em serviço. Com o passar do tempo as estruturas começam a apresentar patologias e assim sendo há que intervir em serviços de manutenção ou, no limite, de recuperação e reforço. Estas intervenções servem para beneficiar ou reforçar as estruturas, com o intuito de evitar acidentes, pois estes, levariam a grandes prejuízos e contratempos, principalmente quando estas obras se situam em meios urbanos. Os problemas patológicos que surgem numa estrutura são ocasionados pela sua antiguidade, por manutenção inadequada ou mesmo ausência de total de manutenção, têm na sua origem o desconhecimento técnico e/ou problemas financeiros. Este trabalho consiste num projecto de beneficiação e reforço de um túnel ferroviário, fazendo uma abordagem das patologias existentes nos vários elementos construtivos e uma apresentação das técnicas de reabilitação e reforço utilizadas.

Simulação, em software adequado, da sintomatologia vibracional de avarias mecânicas de máquinas rotativas

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica na Área de Manutenção e Produção

Manutenção ferroviária

Relatório de Estágio para obtenção do grau de Mestre em Engenharia Civil

Contribuição para o conhecimento das propriedades pozolânicas da fracção fina resultante da produção de areia de origem granítica

O presente estudo diz respeito a um trabalho de pesquisa no âmbito de uma Tese de Mestrado incluída no segundo ciclo de estudos do curso de Engenharia Geotécnica e Geoambiente, realizado sobre as condições de desidroxilação para a obtenção de metacaulino com propriedades cimentíceas, a partir da fracção argilosa proveniente dos finos residuais da produção de areias de natureza granítica. O produto resultante da alteração e desintegração dos feldspatos constituintes dos granitos são ricos em caulinite. Na natureza e em particular no Norte de Portugal, existem significativos depósitos cauliníticos com características potenciadoras para a produção de metacaulino. O metacaulino utilizado neste estudo foi obtido de uma amostra de argila submetida a 750oC, por um período de tempo de 30 minutos, processo que permitiu a desidroxilação quase total da matéria-prima, transformando esta numa fase amorfa e irreversível, com propriedades pozolânicas. Os metacaulinos, também conhecidos por geopolímeros, são produtos de fácil produção utilizando uma matéria-prima abundante e proporcionam a obtenção de novos produtos que permitem a substituição parcial do cimento Portland normal na composição das pastas de betão, com vantagens significativas no comportamento mecânico e na resistência aos agentes atmosféricos. Neste estudo são apresentados os resultados dos ensaios de caracterização da matéria-prima, das condições de calcinação e do produto resultante da desidroxilação, nomeadamente a determinação da pozolanicidade e das características fundamentais para a aplicabilidade do produto. No âmbito da especialidade de Georrecursos, consideramos que este trabalho está perfeitamente adequado, já que, para além do estudo para o conhecimento das propriedades da matéria-prima, foi possível, através das alterações introduzidas com o tratamento térmico, obter um novo produto, cuja utilização terá importantes reflexos na sustentabilidade dos recursos naturais e sua utilização.

Invisible cities: the table of contents and the labyrinths of reality

In Invisible Cities (1972), Italo Calvino contrasts a rigid outline structure with a flexible textual content. The tension comprised by the numerical structure proposed in the table of contents stands out against the set of polissemic texts which make up the subject matter of the book. The opposition between form and content point to a fruitful dichotomy in the conception of the novel linked to the theories of the open and closed work. This essay will investigate the structural construction of Invisible Cities by looking at its table of contents, seeking to discuss some models of formalistic representation proposed by the criticism and the specific contribution they may, or may not, provide. The objective is to analyse the pertinence of such theories in the light of historical and cultural approaches. Aiming to uncover possible meanings which arise from the debate, this essay will question to what extent structural complexities can be considered literary if they are not ultimately related to the culture in which a text is found.

Position paper on time and event-triggered communication services in the context of e-manufacturing

Modern factories are complex systems where advances in networking and information technologies are opening new ways towards higher efficiency. Such move is being driven by market rules with ever-increasing competition levels, in search for faster time-to-market, improved process yield, non-stop operations, flexible manufacturing and tighter supply-chain coupling. All these aims present a common requirement, i.e. a realtime flow of information, from the plant-floor up to the management, maintenance, suppliers and clients, to support accurate monitoring and control of the factory. This stresses the importance achieved by the communication infrastructure in modern manufacturing industry. This paper presents the authors view concerning the current trends in modern factory communication systems. It addresses the problems of seamlessly integrating different information flows with diverse requirements, mainly in terms of timeliness. In this aspect, the debate between event-triggered and time-triggered communication is revisited as well as the joint support for both types of traffic. Finally, a view of where factory communication systems are moving to is also presented, showing the impact of open and widely available technologies.