The Flotation of Niobium Oxide Minerals from Carbonatite Ores

Global niobium production is presently dominated by three operations, Araxá and Catalão (Brazil), and Niobec (Canada). Although Brazil accounts for over 90% of the world’s niobium production, a number of high grade niobium deposits exist worldwide. The advancement of these deposits depends largely on the development of operable beneficiation flowsheets. Pyrochlore, as the primary niobium mineral, is typically upgraded by flotation with amine collectors at acidic pH following a complicated flowsheet with significant losses of niobium. This research compares the typical two stage flotation flowsheet to a direct flotation process (i.e. elimination of gangue pre-flotation) with the objective of circuit simplification. In addition, the use of a chelating reagent (benzohydroxamic acid, BHA) was studied as an alternative collector for fine grained, highly disseminated pyrochlore. For the amine based reagent system, results showed that while comparable at the laboratory scale, when scaled up to the pilot level the direct flotation process suffered from circuit instability because of high quantities of dissolved calcium in the process water due to stream recirculation and fine calcite dissolution, which ultimately depressed pyrochlore. This scale up issue was not observed in pilot plant operation of the two stage flotation process as a portion of the highly reactive carbonate minerals was removed prior to acid addition. A statistical model was developed for batch flotation using BHA on carbonatite ore (0.25% Nb2O5) that could not be effectively upgraded using the conventional amine reagent scheme. Results showed that it was possible to produce a concentrate containing 1.54% Nb2O5 with 93% Nb recovery in ~15% of the original mass. Fundamental studies undertaken included FT-IR and XPS, which showed the adsorption of both the protonized amine and the neutral amine onto the surface of the pyrochlore (possibly at niobium sites as indicated by detected shifts in the Nb3d binding energy). The results suggest that the preferential flotation of pyrochlore over quartz with amines at low pH levels can be attributed to a difference in critical hemimicelle concentration (CHC) values for the two minerals. BHA was found to be absorbed on pyrochlore surfaces by a similar mechanism to alkyl hydroxamic acid. It is hoped that this work will assist in improving operability of existing pyrochlore flotation circuits and help promote the development of niobium deposits globally. Future studies should focus on investigation into specific gangue mineral depressants and inadvertent activation phenomenon related to BHA flotation of gangue minerals.

Managing Rentals with Usage-Based Loss

Motivated by new and innovative rental business models, this paper develops a novel discrete-time model of a rental operation with random loss of inventory due to customer use. The inventory level is chosen before the start of a finite rental season, and customers not immediately served are lost. Our analysis framework uses stochastic comparisons of sample paths to derive structural results that hold under good generality for demands, rental durations, and rental unit lifetimes. Considering different \recirculation" rules | i.e., which rental unit to choose to meet each demand | we prove the concavity of the expected profit function and identify the optimal recirculation rule. A numerical study clarifies when considering rental unit loss and recirculation rules matters most for the inventory decision: Accounting for rental unit loss can increase the expected profit by 7% for a single season and becomes even more important as the time horizon lengthens. We also observe that the optimal inventory level in response to increasing loss probability is non-monotonic. Finally, we show that choosing the optimal recirculation rule over another simple policy allows more rental units to be profitably added, and the profit-maximizing service level increases by up to 6 percentage points.

Improving Wood Fuel Pellets for Household Use : Perspectives on Quality, Efficiency and Environment

Bioenergy is one of many contributors to reducing the use of fossil fuels in order to mitigate climate change by decreasing CO2-emissions, and the potential for biofuels are large. The wood fuel pellets are a refined biofuel made of sawdust, which is dried and compressed to achieve improved fuel and transportation properties. In 2007 the amount of wood fuel pellets used for heating purposes in Sweden was 1715000 tons. The aims of this work was: to examine the moisture content and emission of monoterpenes during the drying and pelletising steps of the pellets production (Paper I); to investigate how the recirculation of drying gases affects the energy efficiency of rotary dryers and how the energy efficiency is related to the capacity of the dryer. (Paper II); to analyse the causes of the problems encountered by household end-users of pellets and investigate whether an improved pellet quality standard could reduce these problems (Paper III); to investigate how the energy consumption of the pelletising machine and chosen pellet quality parameters were affected using an increased amount of rapeseed cake in wood fuel pellets (Paper IV); and to identify gaps of knowledge about wood fuel pellet technology and needs for further research on quality, environmental and health aspects throughout the wood fuel pellet chain, from sawdust to heat. (Paper V).

Development of variable displacement oil pump for internal combustion engines

In the last years the need to develop more environmentally friendly and efficient cars as led to the development of several technologies to improve the performance of internal combustion engines, a large part of the innovations are focused in the auxiliary systems of the engine, including, the oil pump, this is an element of great importance in the dynamics of the engine as well a considerable energy consumer. Most solutions for oil pumps to this day are fixed displacement, for medium and high speeds, the pump flow rate is higher than the needs of the engine, this excess flow leads to the need for recirculation of the fluid which represents a waste of energy. Recently, technological advances in this area have led to the creation of variable displacement oil pumps, these have become a 'must have' due to the numerous advantages they bring, although the working principle of vane or piston pumps is relatively well known, the application of this technology for the automotive industry is new and brings new challenges. The focus of this dissertation is to develop a new concept of variable displacement system for automotive oil pumps. The main objective is to obtain a concept that is totally adaptable to existing solutions on the market (engines), both dimensionally as in performance specifications, having at the same time an innovative mechanical system for obtaining variable displacement. The developed design is a vane pump with variable displacement going in line with existing commercial solutions, however, the variation of the eccentricity commonly used to provide an variable displacement delivery is not used, the variable displacement is achieved without varying the eccentricity of the system but with a variation of the length of the pumping chamber. The principle of operation of the pump is different to existing solutions while maintaining the ability to integrate standard parts such as control valves and mechanical safety valves, the pump is compatible with commercial solutions in terms of interfaces for connection between engine systems and pump. A concept prototype of the product was obtained in order to better evaluate the validity of the concept. The developed concept represents an innovation in oil pumps design, being unique in its mechanical system for variable displacement delivery.

Étude expérimentale de l'écoulement en entrée d'aspirateur d'une turbine bulbe

Ce mémoire présente l’étude expérimentale de l’écoulement d’entrée d’un aspirateur d’une turbine bulbe présentant une chute abrupte de performance. Des mesures par vélocimétrie laser à effet Doppler (LDV) ont été réalisées sur deux axes soit en aval des pales de la roue et en aval du moyeu de la roue. Une particularité de cette étude est la conception d’un montage permettant de mesurer la vitesse axiale proche de la paroi du cône. De plus, une méthode d’estimation de la vitesse radiale moyenne a été développée. Ces mesures ont permis de caractériser l’écoulement primaire et les écoulements secondaires et d’analyser leur évolution entre les deux axes. De plus, l’évolution de ces écoulements est analysée en fonction de la chute de performance de la turbine. Les principales particularités de l’écoulement sont la présence d’une recirculation sous le moyeu, d’une zone contrarotative, des sillages des directrices et des tourbillons de bout de pale.

Reator de leito estruturado com recirculação submetido à aeração intermitente no tratamento de esgoto sanitário

The release of nitrogen compounds in water bodies can result in many environmental problems, so treat wastewater, such as sewage in order to remove not only organic matter but also nitrogen has been studied a few decades. From the above, the objective of this study was to evaluate the performance of a structured bed reactor, continuous flow, with recirculation, in removing organic matter and nitrogen present in wastewater under different cycles of intermittent aeration (AI) and to evaluate the influence of these cycles in the development of nitrifying bacteria (Oxidizing Bacteria Ammonia - BOA and Bacteria Oxidizing Nitrite - BON) and denitrifying (DESN) adhered (Support Material - MS) and suspension (Effluent - EF and sludge - LD). The reactor used has usable volume of 9.4 L. As support materials (MS) polyurethane foam was used, cut and fixed in PVC rods. 3 were worked aeration phases (AE) and non-aeration (AN) at different stage: Stage 1 (4 h EA / AN 2H); Stage 2 (2H EA / AN 1 h) and Phase 3 (2H EA / AN 2 h). During all hydraulic detention time phases was kept at 16 h and the effluent recirculated at a rate of 3 times the inflow. Were analyzed: pH, total alkalinity, temperature, chemical oxygen demand (COD), Biochemical Oxygen Demand (BOD), nitrogen Kjeldhl Total (NKT), ammonia-N-N-NH4+, nitrito-N-NO2+andnitrato-NO3-. The concentration of BOA, BON and DESN was determined using the number More Provável.gSSV-1 (NMP.gSSV-1). In phase 1 the percentage removal NTK N-NH4+ and NT was 76±10%, 70±21% and 67±10% respectively. In Phase 2 80±15% of removel NKT, 86±15% of N-NH4+ e 68±9% of removel NT e na Fase 3 de 58±20%, 72±28% and 41±6% of NKT, N-NH4+ of NT, respectively. The denitrification efficiency in stage 3 was over 70%, indicating that occurred in the reactor the process of simultaneous nitrification and denitrification (NDS). DQOT the removal percentages were 88 ± 4% in Phase 1, 94 ± 7 in Phase 2 and 90± 11% in Phase 3. The multivariate ANOVA applied to NMP.gSSV-1, it indicated that there was significant (F: 20,2, p <0,01) between the analyzed concentration of organisms AI in different cycles, but the differences between NMP.gSSV-1 depends not only isolated factors but of which means, and phase groups being analysis. From the results it is concluded that the working system is efficient in terms of nitrogen removal and organic matter, and that the stage with the highest availability of Dissolved Oxygen (DO) and C/N ratio (Step 2), was the one obtained the lower concentrations of organic matter effluents and N-NH4+. Hinted that there was a significant difference between the concentration (NMP.100mL-1) of the analyzed organizations (BOA, BON and DESN), but this difference does not depend on factors alone but of which means (MS, EF or LD), stages (1, 2 or 3) and groups (BOA, BON and DESN) is being considered.

Processing traits of European catfish (Silurus glanis Linnaeus, 1758) from outdoor flow-through and indoor recycling aquaculture units

The quality of fish cultured using recycling units may differ from that of fish from outdoor farming units due to a range of deviating environmental determinants. This applies not only to flesh quality but also to morphological (processing) traits. This study evaluates processing yields of sibling fish cultured in two different farming units: (i) an outdoor pond aquaculture system with a flow-through regime (24.6 ± 0.2°C), and (ii) indoor tanks using a recirculation aquaculture system (RAS; 26.0 ± 1.0°C). Clear differences were observed in the most important processing traits, i.e. skinned trunk and fillet yields, which were both significantly higher (P < 0.01) in RAS fish due to significantly smaller (P < 0.05) head weight in fish of the flow-through system. Skin represented a significantly higher (P < 0.01) proportion of total weight in both RAS males and females. The most obvious difference was in the deposited fat weight, which was significantly higher (P < 0.01) in RAS fish. Visceral fat deposits were significantly higher (P < 0.01) in females and ventral and dorsal fat deposits higher (P > 0.05) in males.

Optimisation de l'extraction, en réacteur "batch", de biomasse énergétique à l'aide d'émulsions ultrasoniques de solvants verts

L’industrie des biocarburants de deuxième génération utilise, entre autre, la biomasse lignocellulosique issue de résidus forestiers et agricoles et celle issue de cultures énergétiques. Le sorgho sucré [Sorghum bicolor (L.) Moench] fait partie de ces cultures énergétiques. L’intérêt croissant de l’industrie agroalimentaire et des biocarburants pour cette plante est dû à sa haute teneur en sucres (jusqu’à 60% en masse sèche). En plus de se développer rapidement (en 5-6 mois), le sorgho sucré a l’avantage de pouvoir croître sur des sols pauvres en nutriments et dans des conditions de faibles apports en eau, ce qui en fait une matière première intéressante pour l’industrie, notamment pour la production de bioéthanol. Le concept de bioraffinerie alliant la production de biocarburants à celle de bioénergies ou de bioproduits est de plus en plus étudié afin de valoriser la production des biocarburants. Dans le contexte d’une bioraffinerie exploitant la biomasse lignocellulosique, il est nécessaire de s’intéresser aux différents métabolites extractibles en plus des macromolécules permettant la fabrication de biocarburants et de biocommodités. Ceux-ci pouvant avoir une haute valeur ajoutée et intéresser l’industrie pharmaceutique ou cosmétique par exemple. Les techniques classiques pour extraire ces métabolites sont notamment l’extraction au Soxhlet et par macération ou percolation, qui sont longues et coûteuses en énergie. Ce projet s’intéresse donc à une méthode d’extraction des métabolites primaires et secondaires du sorgho sucré, moins coûteuse et plus courte, permettant de valoriser économiquement l’exploitation industrielle du de cette culture énergétique. Ce travail au sein de la CRIEC-B a porté spécifiquement sur l’utilisation d’une émulsion ultrasonique eau/carbonate de diméthyle permettant de diminuer les temps d’opération (passant à moins d’une heure au lieu de plusieurs heures) et les quantités de solvants mis en jeu dans le procédé d’extraction. Cette émulsion extractive permet ainsi de solubiliser à la fois les métabolites hydrophiles et ceux hydrophobes. De plus, l’impact environnemental est limité par l’utilisation de solvants respectueux de l’environnement (80 % d’eau et 20 % de carbonate de diméthyle). L’utilisation de deux systèmes d’extraction a été étudiée. L’un consiste en la recirculation de l’émulsion, en continu, au travers du lit de biomasse; le deuxième permet la mise en contact de la biomasse et des solvants avec la sonde à ultrasons, créant l’émulsion et favorisant la sonolyse de la biomasse. Ainsi, en réacteur « batch » avec recirculation de l’émulsion eau/DMC, à 370 mL.min[indice supérieur -1], au sein du lit de biomasse, l’extraction est de 37,91 % en 5 minutes, ce qui est supérieur à la méthode ASTM D1105-96 (34,01 % en 11h). De plus, en réacteur « batch – piston », où la biomasse est en contact direct avec les ultrasons et l’émulsion eau/DMC, les meilleurs rendements sont de 35,39 % en 17,5 minutes, avec 15 psig de pression et 70 % d’amplitude des ultrasons. Des tests effectués sur des particules de sorgho grossières ont donné des résultats similaires avec 30,23 % d’extraits en réacteur « batch » avec recirculation de l’émulsion (5 min, 370 mL.min[indice supérieur -1]) et 34,66 % avec le réacteur « batch-piston » (30 psig, 30 minutes, 95 % d’amplitude).

The study of histopathological damage in heart and bulbus arteriosus in rainbow trout

This study investigated the pathological changes of heart and bulbus artrius of rainbow trout breeders in several group of ages and density. The aim of study was to consider the process and the intensity of the heart and bulbus arteriosus damages in accordance to gender, age and stocking density of trout in three fish culture center (Zarghezel, Niyak in Haraz Region,Mazandaran and Espiran in Tabriz city environs). In field research, the all records the feed and feeding type, rate of mortality, stocking density of spawners and per spawners fishes, water chemical and physical specification was screened. Stocking density was considered as the most important stressor. 10 fish specimens from 7 weight groups (less than 90g, 90 to 300g, 300 to 500 g, 500 to 1000g, 1 to 3 kg, 3 to 5 kg, over 5 kg), totally 210 specimens were sampled and heart and bulbus arteriosus were taken. Samples were fixed in 10 % formalin and transferred to pathology laboratory of veterinary faculty of Tabriz Azad University. Histopathological slides and H&E staining were prepared from these samples. In total, 47 male and 73 female samples showed cardiovascular injury (29 cases in extensive system, 41 cases in semi intensive system, 50 cases in intensive system). The most important was damages, edema and hyperemia in spongy layer of atrium and ventricle muscles, but degeneration the muscle fibers, moderate edema , minor vascular damage. Hemorrhage as the effect of severs vascular damage, thrombus, sever inflammation, sever degeneration in muscle fiber, necrosis and fibrose were further pathological changed. The results of this study showed that the severity of damage increased by increasing the age (weight) of fishes. This situation was seen in all three culturing system (extensive system, semi intensive system, recirculation system). Histopathological changes is obviously seen in samples over 500g, therefore the damages were found to be important (P<0.05). Pathological effects and its severity in recirculation system was significantly high (P<0.05). Comparison with two other culturing system, histopathological changed in heart and bulbus arterius between male and female was significantly different.

Evaluation Of An Extended Duct Air Delivery System For Spaces Conditioned By Rooftop Units

Traditional air delivery to high-bay buildings involves ceiling level supply and return ducts that create an almost-uniform temperature in the space. Problems with this system include potential recirculation of supply air and higher-than-necessary return air temperatures. A new air delivery strategy was investigated that involves changing the height of conventional supply and return ducts to have control over thermal stratification in the space. A full-scale experiment using ten vertical temperature profiles was conducted in a manufacturing facility over one year. The experimental data was utilized to validated CFD and EnergyPlus models. CFD simulation results show that supplying air directly to the occupied zone increases stratification while holding thermal comfort constant during the cooling operation. The building energy simulation identified how return air temperature offset, set point offset, and stratification influence the building’s energy consumption. A utility bill analysis for cooling shows 28.8% HVAC energy savings while the building energy simulation shows 19.3 – 37.4% HVAC energy savings.

Mean structure of the North Atlantic subtropical permanent pycnocline from in-situ observations

In the north Atlantic subtropical gyre, the oceanic vertical structure of density is characterized by a region of rapid increase with depth. This layer is called the permanent pycnocline. The permanent pycnocline is found below a surface mode water ,which are ventilated every winter when penetrated locally by the mixed layer. Assessing the structure and variability of the permanent pycnocline is of a major interest in the understanding of the climate system because the pycnocline layer delimits important heat and anthropogenic reservoir. Moreover, the heat content structure translate into changes in the large scale stratification feature, such as the permanent pycnocline. We developed a new objective algorithm for the characterization of the large scale structure of the permanent pycnocline (OAC-P). Argo data have been used with OAC-P to provide a detailed description of the mean structure of the North-Atlantic subtropical pycnocline (e.g.: depth, thickness, temperature, salinity, density, potential vorticity). Results reveal a surprisingly complex structure with inhomogeneous properties. While the classical bowl shape of the pycnocline depth is captured, much more complex pycnocline structure emerges at the regional scale. In the southern recirculation gyre of the Gulf Stream Extension, the pycnocline is deep, thick, the maximum of stratification is found in the middle on the layer and follow an isopycnal surface. But local processes influence and modify this textbook description and the pycnocline is characterized by a vertically asymmetric structure and gradients in thermohaline properties. T/S distribution along the permanent pycnocline depth is complex and reveals a diversity of water masses resulting from mixing of different source waters. We will present the observed mean structure of the North-Atlantic subtropical permanent pycnocline and relate it to physical processes that constraint it.

Simulação de um sistema de tratamento de águas residuais de lamas ativadas

A modelação matemática de Estações de Tratamento de Águas Residuais (ETAR) tem sido uma ferramenta de enorme utilidade nas fases de projeto e de exploração destas estruturas de tratamento. O presente estudo teve por objetivo principal construir um modelo matemático da ETAR de Bragança, em particular do seu tratamento biológico de lamas ativadas, com vista a avaliar, compreender e otimizar o seu desempenho. A construção do modelo foi efetuada com recurso ao ambiente de simulação WRc STOAT 5.0. O processo de lamas ativadas foi descrito pelo modelo de referência ASAL3. O modelo construído foi calibrado e validado com base em dados experimentais de 2015, obtidos no âmbito do programa de controlo analítico da ETAR. O modelo foi ainda utilizado para avaliar a qualidade do efluente em resposta a alterações do caudal e composição do afluente, a alterações de condições operacionais e a outras alternativas de tratamento. O modelo mostrou-se bastante adequado na descrição da evolução mensal da qualidade do efluente final da ETAR relativamente aos parâmetros Sólidos Suspensos Totais (SST) e Carência Bioquímica de Oxigénio (CBO5), embora apresente uma tendência para os subestimar em 1,5 e 3,5 mg/L, respetivamente. Em relação ao azoto total, os valores simulados aproximaram-se dos valores reais, quando se aumentaram as taxas de recirculação interna para 400%, um fator de cerca de 4 vezes superior. Os resultados do modelo e dos cenários mostram e reforçam o bom desempenho e a operação otimizada da ETAR em relação a remoção de SST e CBO5. Em relação ao azoto total, a ETAR não assegura de forma sistemática uma eficiência elevada, mas apresenta um bom desempenho, face ao que o modelo consegue explicar para as mesmas condições operacionais. Através do estudo de cenários procurou-se encontrar alternativas de tratamento eficientes e viáveis de remoção de azoto total, mas não se identificaram soluções que assegurassem decargas de azoto abaixo dos limites legais. Os melhores resultados que se alcançaram para a remoção deste contaminante estão associados ao aumento das taxas de recirculação interna do sistema pré-anóxico existente e a uma configuração do tipo Bardenpho de quatro estágios com alimentação distribuída, em proporções iguais, pelos dois estágios anóxicos. Outras soluções que envolvam tecnologias distintas podem e devem ser equacionadas em projetos futuros que visem a melhoria de eficiência de remoção de azoto da ETAR.

Study of nephrocalcinosis in rainbow trout (Oncorhynchus mykiss), from fry to brood stock

For survey incidence of nephrocalcinosis in rainbow trout fish, during winter 1385, samplings were performed in three fish farm with different water source: river, spring and recirculation system by using well water. In this survey 5 specimens from each 8 groups and in general 120 specimens of this fish were caught by random sampling, and also amounts of O2, CO2, pH and temperature of water were measured. Then blooding and renal tissue sampling performed that renal samples were fixed in 10% buffered formalin and blood samples after separating serum stored in -200C. Renal specimens transferred to pathology laboratory, pathological slides were prepared and stained by hematoxylin & Eosin method. From 120 specimens, 6 cases of fish represent nephrocalcinosis. Pathologic signs include: renal epithelial necrosis, dilated ureters, dense basophilic materials inside the dilated tubules and cast formation in some renal tubules. From 6 cases of nephrocalcinosis, 3 cases (7/5%) were related to recirculation system and 2 (5%) case were related to river water and 1 (2/5%) case was related to spring water. In survey amount of urea, creatinine and Uric acid between different weight groups, distinguished that difference between creatinine middling in different weight groups were significant and also in between healthy and afflicted fish, significant statistical difference were only in creatinine amount between healthy and afflicted fish in each farm. Amounts of O2, pH and temperature of water in three farms were in normal range and only rate of water CO2 in ponds of recirculatory system were very higher (25 mg/lit) than other farms. May be, this reason led to high number of nephrocalcinosis in recirculatory system, than other farms, nemley 7/5% of fish that caught from this farm .This subject is related to the role of CO2 in creating nephrocalcinosis which is descript in references.

Assessing land–ocean connectivity via submarine groundwater discharge (SGD) in the Ria Formosa Lagoon (Portugal): combining radon measurements and stable isotope hydrology

Natural radioactive tracer-based assessments of basin-scale submarine groundwater discharge (SGD) are well developed. However, SGD takes place in different modes and the flow and discharge mechanisms involved occur over a wide range of spatial and temporal scales. Quantifying SGD while discriminating its source functions therefore remains a major challenge. However, correctly identifying both the fluid source and composition is critical. When multiple sources of the tracer of interest are present, failure to adequately discriminate between them leads to inaccurate attribution and the resulting uncertainties will affect the reliability of SGD solute loading estimates. This lack of reliability then extends to the closure of local biogeochemical budgets, confusing measures aiming to mitigate pollution. Here, we report a multi-tracer study to identify the sources of SGD, distinguish its component parts and elucidate the mechanisms of their dispersion throughout the Ria Formosa – a seasonally hypersaline lagoon in Portugal. We combine radon budgets that determine the total SGD (meteoric + recirculated seawater) in the system with stable isotopes in water (δ2H, δ18O), to specifically identify SGD source functions and characterize active hydrological pathways in the catchment. Using this approach, SGD in the Ria Formosa could be separated into two modes, a net meteoric water input and another involving no net water transfer, i.e., originating in lagoon water re-circulated through permeable sediments. The former SGD mode is present occasionally on a multi-annual timescale, while the latter is a dominant feature of the system. In the absence of meteoric SGD inputs, seawater recirculation through beach sediments occurs at a rate of  ∼  1.4  ×  106 m3 day−1. This implies that the entire tidal-averaged volume of the lagoon is filtered through local sandy sediments within 100 days ( ∼  3.5 times a year), driving an estimated nitrogen (N) load of  ∼  350 Ton N yr−1 into the system as NO3−. Land-borne SGD could add a further  ∼  61 Ton N yr−1 to the lagoon. The former source is autochthonous, continuous and responsible for a large fraction (59 %) of the estimated total N inputs into the system via non-point sources, while the latter is an occasional allochthonous source capable of driving new production in the system.

Routines in a European aquaculture company and the development of a Flavobacterium psychrophilum dose response pre-model in adult Rainbow Trout

An internship in a European company dealing with aquaculture and biotechnology - AquaBioTech Group, Malta - was undertaken to complete the Master Degree of Science in Aquaculture of the School of Tourism and Maritime Technology of the Polytechnic Institute of Leiria. Biotechnology and aquaculture are two areas that have been synergistically used to contribute for the progress and improvement of fish production. The AquaBioTech Group is an example of a company able to integrate these areas to maximizing their services. Located in Mosta (Malta) the company operates in a sustainable way using Recirculation Aquaculture Systems (RAS) to maintain aquaculture species. In collaboration with several companies and institutions, the AquaBioTech Group is involved and supports the development of important international research projects. The present report focuses on two important parts of the internship performed during 6 months. Initially, it will cover the operation and constitution of the company, describing the routines and techniques acquired. Then, it will describe a pathology trial that forms the practical and scientific component of this report. Despite the limitation to describe some confidential assays, this trial consisted in the infection of Rainbow Trout (Oncorhynchus mykiss) with the bacterium Flavobacterium psychrophilum in order to evaluate the mortality rates over time. The internship served to solidify theoretical knowledge acquired during the academic training, develop professional skills and provide an understanding of jobs available on the market.