Bond quality of cross-laminated timber from Irish Sitka spruce

The potential use of Irish-grown Sitka spruce for cross-laminated timber (CLT) manufacture is investigated as this would present new opportunities and novel products for Irish timber in the home and export markets. CLT is a prefabricated multilayer engineered wood product made of at least three orthogonally bonded layers of timber. In order to increase rigidity and stability, successive layers of boards are placed cross-wise to form a solid timber panel. Load-bearing CLT wall and floor panels are easily assembled on site to form multi-storey buildings. This improves construction and project delivery time, reduces costs,
and maximises efficiency on all levels.

The paper addresses the quality of the interface bond between the laminations making up the panels, which is of fundamental importance to the load bearing capacity. Therefore, shear tests were carried out on nine test bars of three glue lines each. Moreover, delamination tests were performed on samples subjected to accelerated aging, in order to assess the durability of bonds subjected to severe environmental conditions. In addition, this paper gives an indication on thickness tolerances of planed Irish Sitka spruce lamellas, which is likely to be a critical factor for bonding quality and adhesive selection. The test results of bond quality presented in this study were within requirements of prEN 16351:2013.

Changes in quality and safety attributes throughout long term storage of tomato juice processed by high pressure.

Tomato is the second most widely grown vegetable crop across the globe and it is one of widely cultivated crops in Sri Lanka. However, tomato industry in Sri Lanka facing a problem of high postharvest loss (54%) during the glut coupled with heavy revenue loss to the country by importing processed products. The aim of this work is to develop shelf-stable tomato product with maximum quality characteristics using high pressure processing (HPP). Tomato juice with altered and unaltered pH was processed using HPP at 600 MPa for 1 min after blanching (90 oC/2 min). As a control tomato juice was subjected to thermal processing (TP) at 95 oC /20 min. Processed samples were stored under 20oC and 28oC for 9 month period and analysed for total viable count (TVC) and instrumental colour (L, a, b) value at 0,1,2 3, and 4 week and 2, 3, 6 and 9 months interval. The raw juice sample had initial 6.69 log10 CFU/ml and both TP and HPP caused a more than 4.69 log10 reduction in the TVC of juice and microbial numbers remained low throughout the storage period even at 3 months after storage irrespective of the storage temperature. Both TP and HPP treated samples had the redness ⤘a value’ of 14.44-17.15 just after processing and showed non-significant reduction with storage in all the treatments after 3 months. The storage study results and discussed in relation to the end goal and compared with the literature.

Metabonomic studies to assess beer quality and stability

The work reported in this thesis aimed at applying the methodology known as metabonomics to the detailed study of a particular type of beer and its quality control, with basis on the use of multivariate analysis (MVA) to extract meaningful information from given analytical data sets. In Chapter 1, a detailed description of beer is given considering the brewing process, main characteristics and typical composition of beer, beer stability and the commonly used analytical techniques for beer analysis. The fundamentals of the analytical methods employed here, namely nuclear magnetic resonance (NMR) spectroscopy, gas-chromatography-mass spectrometry (GC-MS) and mid-infrared (MIR) spectroscopy, together with the description of the metabonomics methodology are described shortly in Chapter 2. In Chapter 3, the application of high resolution NMR to characterize the chemical composition of a lager beer is described. The 1H NMR spectrum obtained by direct analysis of beer show a high degree of complexity, confirming the great potential of NMR spectroscopy for the detection of a wide variety of families of compounds, in a single run. Spectral assignment was carried out by 2D NMR, resulting in the identification of about 40 compounds, including alcohols, amino acids, organic acids, nucleosides and sugars. In a second part of Chapter 3, the compositional variability of beer was assessed. For that purpose, metabonomics was applied to 1H NMR data (NMR/MVA) to evaluate beer variability between beers from the same brand (lager), produced nationally but differing in brewing site and date of production. Differences between brewing sites and/or dates were observed, reflecting compositional differences related to particular processing steps, including mashing, fermentation and maturation. Chapter 4 describes the quantification of organic acids in beer by NMR, using different quantitative methods: direct integration of NMR signals (vs. internal reference or vs. an external electronic reference, ERETIC method) and by quantitative statistical methods (using the partial least squares (PLS) regression) were developed and compared. PLS1 regression models were built using different quantitative methods as reference: capillary electrophoresis with direct and indirect detection and enzymatic essays. It was found that NMR integration results generally agree with those obtained by the best performance PLS models, although some overestimation for malic and pyruvic acids and an apparent underestimation for citric acid were observed. Finally, Chapter 5 describes metabonomic studies performed to better understand the forced aging (18 days, at 45 ºC) beer process. The aging process of lager beer was followed by i) NMR, ii) GC-MS, and iii) MIR spectroscopy. MVA methods of each analytical data set revealed clear separation between different aging days for both NMR and GC-MS data, enabling the identification of compounds closely related with the aging process: 5-hydroxymethylfurfural (5-HMF), organic acids, γ-amino butyric acid (GABA), proline and the ratio linear/branched dextrins (NMR domain) and 5-HMF, furfural, diethyl succinate and phenylacetaldehyde (known aging markers) and, for the first time, 2,3-dihydro-3,5-dihydroxy-6-methyl-4(H)-pyran-4-one xii (DDMP) and maltoxazine (by GC-MS domain). For MIR/MVA, no aging trend could be measured, the results reflecting the need of further experimental optimizations. Data correlation between NMR and GC-MS data was performed by outer product analysis (OPA) and statistical heterospectroscopy (SHY) methodologies, enabling the identification of further compounds (11 compounds, 5 of each are still unassigned) highly related with the aging process. Data correlation between sensory characteristics and NMR and GC-MS was also assessed through PLS1 regression models using the sensory response as reference. The results obtained showed good relationships between analytical data response and sensory response, particularly for the aromatic region of the NMR spectra and for GC-MS data (r > 0.89). However, the prediction power of all built PLS1 regression models was relatively low, possibly reflecting the low number of samples/tasters employed, an aspect to improve in future studies.

Microbiological quality of bivalves: relevance to food safety

Os moluscos bivalves constituem um recurso haliêutico de elevada importância na economia (inter)nacional pelas suas características organolépticas, valor nutritivo e relevância na gastronomia tradicional. Não obstante, representam um produto alimentar de elevado risco para a saúde pública. A contaminação microbiológica (autóctone e antropogénica), sendo crónica nos bancos de bivalves das zonas estuarino-lagunares, constitui uma das principais preocupações associadas à segurança alimentar. Aquando da filtração inerente aos processos de respiração e alimentação, os bivalves bioacumulam passivamente microrganismos incluindo os patogénicos. A sua colocação no mercado impõe pois, prévia salubrização para níveis microbiológicos compatíveis com a legislação em vigor, salvaguardando a saúde pública. Apesar da monitorização das áreas de apanha e produção, das medidas de prevenção e da depuração, a ocorrência de surtos associados ao consumo de bivalves tem aumentado. Tal deve-se à insuficiente monitorização da contaminação microbiológica dos bivalves, contribuindo para uma gestão ineficaz do produto e consequente sub-valorização. O presente trabalho pretendeu caracterizar o estado de desenvolvimento do sector de exploração de bivalves em Portugal do ponto de vista da segurança alimentar, e analisar os aspectos cruciais da monitorização e da depuração do produto apresentando alternativas abrangentes e aplicáveis ao sector. Assim, desenvolveu-se uma metodologia de base molecular passível de adaptação à monitorização dos bivalves das zonas conquícolas, como alternativa ao método de referência vigente do Número Mais Provável que é baseado apenas na quantificação de Escherichia coli. O mexilhão (Mytilus edulis) da Ria de Aveiro, bivalve de interesse comercial a nível (inter)nacional serviu de modelo para a comparação de protocolos de extração de DNA. Esta metodologia foi desenvolvida de modo a que os métodos de extração de DNA sejam passíveis de aplicação a outras matrizes biológicas ou ambientais. Para além da detecção e quantificação directa de bactérias patogénicas, esta metodologia poderá ser aplicada à monitorização da transferência vertical microbiana nos bancos de bivalves bem como à caracterização da dinâmica espacio-temporal das populações microbianas no ambiente e à monitorização dos processos de depuração. Foi ainda abordado o potencial da aplicação de bacteriófagos ou de enzimas líticas para a optimização dos processos de purificação. O trabalho realizado e as perspectivas futuras propostas pretendem contribuir para a dinamização e requalificação do sector de exploração de bivalves através da melhoria do nível de segurança alimentar dos moluscos bivalves comercializados para alimentação humana, valorizando este recurso.

Modeling and simulation of spray drying processes based on quality by design principles

Tese de doutoramento, Farmácia (Tecnologia Farmacêutica), Universidade de Lisboa, Faculdade de Farmácia, 2014

Impact of energy-using product policies

Energy-using products (EuPs), such as domestic appliances, audio-visual and ICT equipment contribute significantly to CO2 emissions, both in the domestic and non-domestic sectors. Policies that encourage the use of more energy efficient products can therefore generate significant reductions in overall energy consumption and hence, CO2 emissions. To the extent that these policies cause an increase the average production cost of EuPs, they may impose economic costs on producers, or on consumers, or on both. In this theoretical paper, an adaptation of a simple vertical product differentiation model – in which products are characterised in terms of their quality and their energy consumption – is used to analyse the impact of the different EuP polices on product innovation and to assess the resultant economic impacts on producers and consumers. It is shown that whereas the imposition of a binding product standard for energy efficiency unambiguously reduces aggregate profit and increases the average market price in the absence of any learning effects, the introduction or strengthening of demand-side measures (such as energy labelling) may reduce, or increase, aggregate profit. Even in the case where the overall impact is unambiguously negative, the effects of product innovation and learning can be in either direction.

Adulteration and Poor Quality of Ginkgo biloba Supplements

Adulteration of Ginkgo products sold as unregistered supplements within the very large market of Ginkgo products (reputedly £650 million annually) through the post-extraction addition of cheaper (e.g. buckwheat derived) rutin is suspected to allow sub-standard products to appear satisfactory to third parties, e.g. secondary buyers along the value chain or any regulatory authorities. This study was therefore carried out to identify products that did not conform to their label specification and may have been actively adulterated to enable access to the global markets. 500 MHz Bruker NMR spectroscopy instrumentation combined with Topspin version 3.2 and a CAMAG HPTLC system (HPTLC Association for the analysis of Ginkgo biloba leaf) were used to generate NMR spectra (focusing on the 6–8 ppm region for analysis) and chromatograms, respectively. Out of the 35 samples of Ginkgo biloba analysed, 33 were found to contain elevated levels of rutin and/or quercetin, or low levels of Ginkgo metabolites when compared with the reference samples. Samples with disproportional levels of rutin or quercetin compared with other gingko metabolites are likely to be adulterated, either by accident or intentionally, and those samples with low or non-existent gingko metabolite content may have been produced using poor extraction techniques. Only two of the investigated samples were found to match with the High-Performance Thin-Layer Chromatography (HPTLC) fingerprint of the selected reference material. All others deviated significantly. One product contained a 5-hydroxytryptophan derivative, which is not a natural constituent of Ginkgo biloba. Overall, these examples either suggest a poor extraction technique or deliberate adulteration along the value chain. Investigating the ratio of different flavonoids e.g. quercetin and kaempferol using NMR spectroscopy and HPTLC will provide further evidence as to the degree and kind of adulteration of Gingko supplements. From a consumer perspective the equivalence in identity and overall quality of the products needs to be guaranteed for supplements too and not only for products produced according to a quality standard or pharmacopoeial monograph.

The importance of quality in the consolidation of textile in Minho

The textile industry has a long tradition in Portugal and it is one of the most important sectors, despite the current economic crisis. It has always assumed a prominent role in terms of employment and a relevant position within the Portuguese economy. The lack of quality and the lower prices that other countries offer causes the loss of clients. Quality is a main tool to survive nowadays in the textile sector. To undertake our analysis, we made use of an existing database where 55 firms belonged to the textile industry, namely to the manufacturing sector. A new survey was created based on the original survey and was sent to 5 firms. Besides the survey, we also sent a few questions to the firms in order to retract more information about the actually situation in our country, concerning the textile industry. Several tables, graphs and pie charts were made to help shed light on our findings. This research was conducted in order to determine the importance of quality in the consolidation of textile firms in the north of Portugal. Most firms in our sample feel that quality improvement, business benefits, mobilizing employees’ knowledge and business image were important and that competition is very intense and is mainly by price and not by differentiation of product or service. The quality program has contributed to improve their competitive position and the improvement of their overall performance. The majority of the firms in our sample undertake TQM measures for quality purposes to meet customer expectations and prevent errors. Of all firms surveyed, the quality is certainly very important for its survival.

Lucuma as an exotic high quality fruit imported into Portugal and the UE

This project has two different goals, one of them is to promote the consumption of exotic fruits with high quality. The other goal of the project is to look for the viability of turning this work project into a real business, focusing in two different channels to diversify its revenues: B2B and B2C. In order to achieve this second goal, this project aims to see the best way to commercialize this product (Lucuma powder and Pulp of Lucuma) and how to make it in an efficient way with right companies. Therefore, the project aims to create a company to commercialize the product between the producers in Peru and possibly small businesses interested in acquire the processed fruit and also individuals interested in own consumption in small quantities. This project, if successful, tries to diversify the consumption into other good organic healthy products in the long-term.

Crowdfunding campaigns: Perceived quality and success

Research in Crowdfunding is an emerging priority within the field of Entrepreneurship. Hundreds of platforms provide nowadays multiple Crowdfunding schemes which are intended to make it easier for entrepreneurs and others to collect money from the crowd. However, only a few campaigns become successful as others don’t reach the pre-established funding goal. It is thus necessary to keep on understanding the dynamics of these platforms and the factors which justify success. The asymmetry of information has been shown to be a delicate issue as people perceive quality in different manners. As so, this research aims to understand which components of perceived quality mostly influence investments decisions. Mainly Entrepreneurship and Marketing theories were explored along the way. This is research follows a causal approach where nineteen hypotheses are tested. An experimental survey was conducted and data was collected from 127 people who were asked to evaluate one of the most important pieces of any Crowdfunding campaign – the pitch video – and consequently invest on the presented products.

The relationship between product design and business models in the context of sustainability

Dans les sphères du développement durable, des modèles d’affaires et du design de produit, certains leviers rendent le croisement de ces trois sphères de plus en plus pertinent. Au croisement de ces trois sphères se trouve une opportunité de comprendre les relations existantes entre le design de produit et les modèles d’affaires afin d’aider les décideurs à développer des solutions davantage durables. L’approche méthodologique de cette recherche utilise un système complexe et est basée sur un paradigme pragmatique. En vue de répondre à la question « Dans quelle mesure des modèles d’affaires et le design de produit sont liés dans un contexte de développement durable? », cette recherche a soigneusement analysé trois cas: Better Place, une compagnie californienne ayant développé une infrastructure permettant le chargement des voitures électriques; Interface Inc., un manufacturier mondial de tuiles de tapis commerciales établi à Atlanta; et Métacycle, un concept d’entreprise développé par une équipe de chercheurs en design à Montréal. Chaque cas a été analysé en corrélant des aspects du design de produit à des éléments de leur modèle d’affaires. Les résultats montrent que dans le contexte du développement durable, le design de produit et les modèles d’affaires sont interdépendants. Les résultats peuvent être résumés en six points: il existe des relations applicables universellement; les innovations de design substantielles jouent un rôle important dans le développement durable; la « durabilité » peut être une qualité émergente d’un modèle d’affaires; les partenariats peuvent être vitaux pour l’intégration des systèmes; un modèle de services a des bénéfices et des limitations considérables; le design peut agir comme levier à l’utilisation d’énergies renouvelables. Pratiquer simultanément l’innovation du modèle d’affaires et du produit peut apporter une valeur ajoutée, susciter des opportunités et augmenter l’efficience sur plusieurs facettes. Toutefois, les risques et les coûts de tels procédés sont souvent très élevés. En aidant à comprendre et définir comment les trois sphères mentionnées plus tôt sont interdépendantes, cette recherche pourrait idéalement inspirer des recherches supplémentaires sur le sujet. L’application par des organisations de la méthodologie et des apprentissages résultant de cette recherche peut permettre à d’autres d’utiliser le croisement entre l’innovation de produit et l’innovation du modèle d’affaires afin de résoudre des enjeux sociaux et environnementaux complexes.

Studies on the Rheology and the Mechanical Properties of Thermoplastic Elastomer from Latex Product Waste and High Density Polyethylene

Latex waste products contain rubber hydrocarbon of very high quality, which is only lightly cross linked. Selected wastes such as thread waste and glove waste were modified into processable materials by a novel economic process and thermoplastic elastomers were prepared by blending these modified waste materials with high density polyethylene in various proportions. The mechanical properties as well as the rheological behaviour of these blends were evaluated and compared with those of the natural rubber-high density polyethylene blends.

Influence of Processing Variables on Protein Quality and Frozen Storage Stability of Two Commercially Important Species of Squid (Loligo duvaucelii and Doryteuthis sibogae )

Cephalopods are utilized as an important food item in various countries because of its delicacy as raw consumed food. Mainly sepia and loligo are consumed raw by Japanese and Russians. The freshness of the products is very important when the product is consumed raw. The major species that dominate our squid catch are Loligo duvaucelii and Doryteuthis sibogae. There is a noticeable difference in the quality of both the species. The needle squid (Doryteuthis sibogae ) contributes about 35% of the total squid landing. Due to the fast deterioration , a major portion of the needle squid, which is caught during the first few hauls, is thrown back to sea. The catch in the last hauls only are taken to the landing centers. At present the needle squid is processed as blanched rings and the desired quality is not obtained if it is processed as whole, whole cleaned or as tubes. In this study an attempt is made to investigate the biochemical characteristics in both the species of squid in relation to their quality and, the process control measures to be adopted. The effect of various treatments on their quality and the changes in proteolytic and lysosomal enzymes under various processing conditions are also studied in detail.Thus this study can provide the seafood industry with relevant suggestions and solutions for effective utilization of both the species of squid with emphasis on needle squid.

Computer vision techniques in seafood quality control

The application of computer vision based quality control has been slowly but steadily gaining importance mainly due to its speed in achieving results and also greatly due to its non- destnictive nature of testing. Besides, in food applications it also does not contribute to contamination. However, computer vision applications in quality control needs the application of an appropriate software for image analysis. Eventhough computer vision based quality control has several advantages, its application has limitations as to the type of work to be done, particularly so in the food industries. Selective applications, however, can be highly advantageous and very accurate.Computer vision based image analysis could be used in morphometric measurements of fish with the same accuracy as the existing conventional method. The method is non-destructive and non-contaminating thus providing anadvantage in seafood processing.The images could be stored in archives and retrieved at anytime to carry out morphometric studies for biologists.Computer vision and subsequent image analysis could be used in measurements of various food products to assess uniformity of size. One product namely cutlet and product ingredients namely coating materials such as bread crumbs and rava were selected for the study. Computer vision based image analysis was used in the measurements of length, width and area of cutlets. Also the width of coating materials like bread crumbs was measured.Computer imaging and subsequent image analysis can be very effectively used in quality evaluations of product ingredients in food processing. Measurement of width of coating materials could establish uniformity of particles or the lack of it. The application of image analysis in bacteriological work was also done

Influence of collagen content on the texture andstorage quality of fish mince basedproducts

Objectives of the present study are to find out the proximate composition of 20 commercially important tropical fish species on the west coast of India. To determine the collagen content in these commercially important fish species and fractionation of collagen into acid soluble collagen (ASC) and hot water soluble (insoluble) collagen (ISC). To classify fishes according to its collagen content and To study the different storage characteristics in the mince based product—surimi, from different species of fishes. The researcher tries to find out a suitable collagen source to incorporate in surimi. and studies the different storage qualities in the mince based product, surimi at different levels of collagen in different species of fishes. The optimum collagen level to get desirable texture and storage quality for mince based product. The researcher aims to develop some products from surimi with desirable level of collagen. And compare the products prepared from surimi of lesser collagen content fish containing desirable level of collagen with surimi prepared with high collagen content fish without collagen. This study gains in importance as there is littleinformation on the collagen content of different species of fishes in India. So far no attempt was made to classify fishes according to its collagen content.