Influence of pH on the incorporation and growth of Pb2CrO5 crystallites in silica matrix

Pb2CrO5 nanoparticles were embedded in an amorphous SiO2 matrix by the sol-gel process. The pH and heat treatment effects were evaluated in terms of structural, microstructural and optical properties from Pb2CrO5/SiO2 compounds. X-ray diffraction (XRD), high resolution transmission electron microscopy (HR-TEM), energy dispersive spectroscopy (EDS), and diffuse reflectance techniques were employed. Kubelka-Munk theory was used to calculate diffuse reflectance spectra that were compared to the experimental results. Finally, colorimetric coordinates of the Pb2CrO5/SiO2 compounds were shown and discussed. In general, an acid pH initially dissolves Pb2CrO5 nanoparticles and following heat treatment at 600 A degrees C crystallized into PbCrO4 composition with grain size around 6 nm in SiO2 matrix. No Pb2CrO5 solubilization was observed for basic pH. These nanoparticles were incorporated in silica matrix showing a variety of color ranging from yellow to orange.

Growth of silver nano-particle embedded in tellurite glass: Interaction between localized surface plasmon resonance and Er3+ ions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Emergence and initial growth of rambutan seedlings as a function of seed storage conditions

Introduction. Rambutan is a tropical fruit species with recalcitrant seeds. Despite the expansion of exotic fruit cultivation in Brazil, lots of which fruit species, including rambutan, need basic information, especially in relation to propagation and storage of seeds, which are important for genetic improvement studies, maintenance of genetic sources and seedling production. Materials and methods. A completely randomized design was adopted with treatments distributed in a factorial arrangement, 3 x 4, referring to three seed storage conditions [room temperature conditions; a dry chamber with (18 +/- 2) degrees C and 60% relative humidity; and a cold chamber with (10 +/- 2) degrees C and 70% relative humidity] and four storage times ( 0, 7, 14 and 21 d). Each treatment of 10 seeds was replicated five times. Data on seedling emergence, emergence rate, plant height, number of leaves and length of main root were submitted to variance analysis and means were separated using Tukey's test. Correlation analysis between seed moisture and seedling emergence was performed. Results and discussion. Our results indicated that dry chamber conditions promoted the statistically significantly highest seedling emergence after 7 d of storage. Cold chamber conditions promoted an extremely low seedling emergence independently of time. Conclusion. Rambutan seeds can be stored in a dry chamber for 7 d without losing viability; after 14 d of storage the loss of emergence is 60%.

Effect of calcium and magnesium silicate on the growth of the castor oil plant subjected to salinity levels

Salt stress decreases the osmotic potential of soil solution causing water stress, causing toxic effects in the plants resulting in injuries on the metabolism and nutritional disorders, thus compromising the plant growth, resulting in lower production. The calcium silicate and magnesium can perform the same function as limestone, besides providing silicon to plants, may also contribute to the resistance of plants to salt stress. Thus, the objective of this study was to evaluate the effect of calcium and magnesium silicate on the growth of the castor oil plant BRS Energia cultivated under saline conditions. This study evaluated plant height, stem diameter, number of leaves, leaf area, dry weight of shoot and root, and soil chemical characteristics. There was no interaction between factors of salinity level and of silicate level regarding the evaluated variables. There was a direct relationship between salinity levels and plant growth in height and stem diameter. The K concentration in soil were affected by salinity levels.

The effect of gene tubC on the vegetative growth of benomyl-resistant strains of Aspergillus nidulans

Two benomyl-resistant mutants, benD3 tubC41 and benD4 tubC42, of Aspergillus nidulans were isolated after UV treatment. The tubC mutations permitted good conidiation of these strains in culture media containing benomyl and were responsible for increasing their benomyl resistance levels. This implies that β3-tubulin, a product of the tubC gene, in addition to being involved in fungal conidiation, participates in the vegetative growth of the fungus. The tubC gene was located in linkage group I.

Effects of stocking density on growth of channel catfish, Ictalurus punctatus, fingerlings in Southern Brazil

Channel catfish, Ictalurus punctatus, fingerlings (mean length: 4.0±0.5 cm) were stocked into sixteen 16-m2 tanks with cement walls and earth bottoms. Four stocking densities were used: 10, 15, 20, and 25 fish/m2. Fish were fed a prepared diet containing 36% protein according to a fish size/water temperature-dependant chart for 120 days. Fish were stocked on January 20, 1992. Average water temperature varied from 19.7°C to 28.5°C. Final mean values of individual fish length and weight were significantly higher (P < 0.05) for the density of 10 fish/m2 and averaged 19.4±2.6 cm and 70.0±16.9 g, respectively. Food conversion ratio was significantly higher (P < 0.05) for fish stocked at rate of 25 fish/m2. Survival rates averaged 91.4%, with no significant differences (P > 0.05) found among treatments. These results demonstrate the viability of channel catfish fingerling growth in southern Brazil.

Growth of Channel Catfish, Ictalurus punctatus, in Southern Brazil

Despite successful introduction of channel catfish into Brazil in 1980, no studies have been conducted to assess the performance of channel catfish, Ictalurus punctatus, farming in southern Brazil. Fingerlings (27.0 ± 2.2 g) were stocked in sixteen 16-m2 tanks with cement walls and earthen bottoms. Four stocking densities were used: 0.5, 0.75, 1.0, and 1.25 fish/m2. Fish were fed a diet containing 32% protein according to a feeding chart for 257 days (from April to December). Water temperature ranged from 16.4°C to 30°C during the study. Final average weight (727.1 ± 70.6 g) was significantly higher (P < 0.05) for fish raised at 0.5 fish/m2. Food conversion ratio (FCR) was significantly higher (P < 0.05) for fish stocked at 1.25 fish/ m2. Survival averaged 95.4%, and no significant differences (P > 0.05) were found among treatments. There was no significant difference (P > 0.05) in tank production among the densities of 0.75, 1.0, and 1.25 fish/m2, but they were higher (P < 0.05) than the density of 0.5 fish/ m2. These results demonstrate the viability of channel catfish growth in southern Brazil.

Effect of atmosphere on the sintering and grain growth of tin oxide

High purity SnO 2 powder (>99.9%) was compacted in cylindrical pellets and sintered in atmospheres of dry argon, argon with water vapor, oxygen and CO 2 using 10 °C/min up to 1200 °C or isotherms in the range of 1000 to 1200 °C. Time, temperature and sintering atmosphere have large influence on grain growth and low influence on densification of this oxide. Surface diffusion is the dominant mechanism up to 1200 °C and evaporation-condensation is dominant above 1200 °C. The maximum linear shrinkage observed was about 2.0% and attributed to structural rearrangement of particles due to high capillary stresses developed with neighboring particles. © 1999 Trans Tech Publications.

Growth of Dendrobium nobile Lindl. as related with nutrient concentration in the growing media

Dendrobium nobile orchids were grown for three years in different substrates (tree fern fiber, blocks of pressed coconut bark, bark of Eucalyptus grandis, mixtures with coconut bark blocks and eucalyptus bark and mixtures with the latter materials and charcoal. Plant growth increased with higher concentrations of S (up to 1.6 g/kg), Cu (up to 46 mg/kg) and Zn (up to 147 mg/kg), and decreased with higher concentrations of Ca (up to 13.2 g/kg), Mg (up to 6.6 g/kg) and B (up to 19 mg/kg). High Mo (up to 5.3 mg/kg) caused a more intense loss of leaves after planting. Relations between nutrient concentrations also affected plant growth. With exception of eucalyptus bark, all growing media under study were suitable for plant growth.

Effect of temperature on development and population growth of Acarophenax lacunatus (Cross and Krantz) (Prostigmata: Acarophenacidae) on Rhyzopertha dominica (F.) (Coleoptera: Bostrichidae)

The parasitic mite Acarophenax lacunatus kills the eggs upon which it feeds and seems to have potential as a biological control agent of stored grain pests. The lack of biological studies on this mite species led to the present study carried out in laboratory conditions at eight different temperatures (ranging from 20 to 41°C) and 60% relative humidity using Rhyzopertha dominica as host. The higher the temperature, the faster: (1) the attachment of female mites to the host egg (varying from 1 to 5 h); (2) the increase in body size of physogastric females (about twice faster at 40°C than at 20°C); and (3) the generation time (ranging from 40 to 220 h). In addition, the higher the temperature, the shorter the maximum female longevity (ranging from about 75 to 300 h). The two estimated temperature thresholds for development of A. lacunatus on R. dominica were 18 and 40°C. The average number of female and male offspring per gravid mite were 12.8 and 1.0, respectively, with sex ratios (females/total) ranging from 0.91 to 0.94 (maximum at 30°C). The net reproductive rate and intrinsic rate of increase also presented maximum values at 30°C (12.1 and 0.04, respectively).

An improved three-dimensional model for growth of oxide films induced by laser heating

In this paper we consider a three-dimensional heat diffusion model to explain the growth of oxide films which takes place when a laser beam is shined on and heats a metallic layer deposited on a glass substrate in a normal atmospheric environment. In particular, we apply this model to the experimental results obtained for the dependence of the oxide layer thickness on the laser density power for growth of TiO2 films grown on Ti-covered glass slides. We show that there is a very good agreement between the experimental results and the theoretical predictions from our proposed three-dimensional model, improving the results obtained with the one-dimensional heat diffusion model previously reported. Our theoretical results also show the occurrence of surface cooling between consecutive laser pulses, and that the oxide track surface profile closely follows the spatial laser profile indicating that heat diffusive effects can be neglected in the growth of oxide films by laser heating. © 2001 Elsevier Science B.V.

Estimates of covariance functions for growth of Nelore cattle applying a parametric correlation structure to model within-animal correlations

A total of 20,065 weights recorded on 3016 Nelore animals were used to estimate covariance functions for growth from birth to 630 days of age, assuming a parametric correlation structure to model within-animal correlations. The model of analysis included fixed effects of contemporary groups and age of dam as quadratic covariable. Mean trends were taken into account by a cubic regression on orthogonal polynomials of animal age. Genetic effects of the animal and its dam and maternal permanent environmental effects were modelled by random regressions on Legendre polynomials of age at recording. Changes in direct permanent environmental effect variances were modelled by a polynomial variance function, together with a parametric correlation function to account for correlations between ages. Stationary and nonstationary models were used to model within-animal correlations between different ages. Residual variances were considered homogeneous or heterogeneous, with changes modelled by a step or polynomial function of age at recording. Based on Bayesian information criterion, a model with a cubic variance function combined with a nonstationary correlation function for permanent environmental effects, with 49 parameters to be estimated, fitted best. Modelling within-animal correlations through a parametric correlation structure can describe the variation pattern adequately. Moreover, the number of parameters to be estimated can be decreased substantially compared to a model fitting random regression on Legendre polynomial of age. © 2004 Elsevier B.V. All rights reserved.

Morphometric study of the postnatal growth of the parotid gland of the mouse

The growth of the mouse parotid glands during 7 and 35 days of postnatal life was studied by morphometric methods. The mass of the gland, the volume of each morphological compartment, and the cell number in each compartment were evaluated. The data obtained for each evaluated dimension were adjusted by an exponential equation, of the type Y = a.e KX, thus permitting the calculation of their mean duplication time (T D), i.e., an estimation of their growth rate. Analysis of the results showed a marked 1,424% increase in the gland mass during the whole studied period, with T D = 7.10 days. This growth occurred by increases in absolute volume of acini, intercalated ducts, striated ducts, excretory ducts and stroma, with percentual increases of 3,048%, 417%, 2,662%, 2,594% and 367%, respectively, and T Ds of 5.62, 11.71, 5.55, 5.47 and 14.45 days, respectively. Analysis of the cell number growth in each compartment showed increases of 1,904%, 285%, 1,228%, 1,090% and 286%, respectively, and T Ds of 6.62, 20.40, 7.19, 7.26 and 14.51 days, respectively. Based on the present results, we concluded that the growth of the mouse parotid glands from day 7 to day 35 of age occurred by intense cell accumulation, mainly in the acini, striated ducts and excretory ducts, with a growth rate sensibly higher than that of the intercalated ducts and stroma.

Relative growth of the mangrove crab Ucides cordatus (Linnaeus, 1763) (Crustacea, Brachyura, Ocypodidae) at Iguape, São Paulo, Brazil

A total of 2,130 individuals of Ucides cordatus (1,255 males and 875 females) were captured in a mangrove forest at Iguape, São Paulo, Brazil. For each crab, the following body structures were measured: carapace (width = CW; length = CL; depth = CD), 5th abdominal somite (AW), major chelar propodus (length = PL; width = PW; depth = PD), and 1st and 2 nd gonopod pairs (length = GL1 and GL2). The Student t and Snedecor F tests were used to verify any changes in growth allometric rates during ontogeny. The relationships CLxCW, PLxCW (for both sexes), GL1xCW and GL2xCW (males) and AWxCW (females), showed a better fit by two equations for the juvenile and adult phases (p<0.01). The inflexion point size between regression lines, indicated by each morphometric relationship, allowed to propose four morphotypes for U. cordatus. Males were classified in juvenile (CW le; 32 mm), pre-puberty (32 ≤ CW ≤ 51 mm), sub-adult (51 ≤ CW ≤ 59 mm) and adult (CW > 59 mm). Females showed a similar size interval: (juvenile CW ≤ 39 mm, pre-puberty 39 ≤ CW ≤ 53 mm, sub-adult 53 ≤ CW ≤ 58 mm, adult CW > 58 mm).

Isolation and growth of the symbiotic fungus of Atta capiguara (Hymenoptera: Formicidae)

This work's objectives were to isolate and evaluate the growth of the symbiotic fungus of Atta capiguara Gonçalves on artificial medium, under different pH and temperature conditions. Isolation was accomplished using the following media: Sabouraud, oat-agar, PDA, and PDA with the addition of extracts from the grasses Paspalum sp. Flügge and Hyparrhenia rufa (Nees) Stapf.. The medium used in the growth study was PDA with the addition of a Paspalum sp. (0.22%, w/v) extract at initial pH values of 4.5, 6.0, and 7.5. Mycelium disks were transferred to plates containing the culture medium. The plates were maintained at temperatures of 20, 23, and 26 ± 1°C. Mycelial radial growth evaluations were performed at 7, 14, 21, 28, and 35 days of incubation. Fungus isolation was obtained in all media studied. The highest radial means were obtained at initial pH values of 6.0 and 7.5 and temperatures of 23 and 26± 1°C. Greater plot losses occurred at the initial pH condition of 7.5. In general, A. capiguara fungi can be grown in the medium studied, at an initial pH of 6.0 and temperatures of 23 or 26± 1°C. Radial growth evaluations at 14 and 28 days of incubation can be recommended for substrate studies involving the symbiotic fungus.