Effects of modified atmosphere packaging on ripening of 'Douradão' peach related to pectolytic enzymes activities and chilling injury symptoms

The present study evaluated the effects of modified atmosphere packaging on inhibition of the development of chilling injury symptoms in 'Douradão' peach after cold storage and the possible involvement of cell wall enzymes. Fruits were harvested at the middle stadium of ripening, packed in polypropylene trays and placed inside low density polyethylene (LDPE) bags (30, 50, 60 and 75 µm of thickness) with active modified atmosphere (10 kPa CO2 + 1.5 kPa O2, balance N2). The following treatments were tested: Control: peaches held in nonwrapped trays; MA30: LDPE film - 30 µm; MA50: LDPE film - 50 µm; MA60: LDPE film - 60 µm and MA75: LDPE film - 75 µm. Fruits were kept at 1±1ºC and 90±5% relative humidity (RH) for 28 days. After 14, 21 and 28 days, samples were withdrawn from MAP and kept in air at 25±1ºC and 90±5% RH for ripening. On the day of removal and after 4 days, peaches were evaluated for woolliness incidence, pectolytic enzymes activities. The respiratory rate and ethylene synthesis were monitored during 6 days of ripening. The results showed that MA50 and MA60 treatments had positive effect on the inhibition of the development of woolly texture and reduced pectin methylesterase activity on the ripe fruits, keeping good quality of 'Douradão' peach during 28 days of cold storage. The treatments Control, MA30 and MA75 showed higher woolliness incidence and did not present marketable conditions after 14 days of cold storage.

Phyllochron estimation in intercropped strawberry and monocrop systems in a protected environment

The phyllochron is defined as the time required for the appearance of successive leaves on a plant; this characterises plant growth, development and adaptation to the environment. To check the growth and adaptation in cultivars of strawberry grown intercropped with fig trees, it was estimated the phyllochron in these production systems and in the monocrop. The experiment was conducted in greenhouses at the University of Passo Fundo (28º15'41'' S, 52º24'45'' W and 709 m) from June 8th to September 4th, 2009; this comprised the period of transplant until the 2nd flowering. The cultivars Aromas, Camino Real, Albion, Camarosa and Ventana, which seedlings were originated from the Agrícola LLahuen Nursery in Chile, as well as Festival, Camino Real and Earlibrite, originated from the Viansa S.A. Nursery in Argentina, were grown in white polyethylene bags filled with commercial substrate (Tecnomax®) and evaluated. The treatments were arranged in a randomised block design and four replicates were performed. A linear regression was realized between the leaf number (LN) in the main crown and the accumulated thermal time (ATT). The phyllochron (degree-day leaf-1) was estimated as the inverse of the angular coefficient of the linear regression. The data were submitted to ANOVA, and when significance was observed, the means were compared using the Tukey test (p < 0.05). The mean and standard deviation of phyllochrons of strawberry cultivars intercropped with fig trees varied from 149.35ºC day leaf-1 ± 31.29 in the Albion cultivar to 86.34ºC day leaf-1 ± 34.74 in the Ventana cultivar. Significant differences were observed among cultivars produced in a soilless environment with higher values recorded for Albion (199.96ºC day leaf-1 ± 29.7), which required more degree-days to produce a leaf, while cv. Ventana (85.76ºC day leaf-1 ± 11.51) exhibited a lower phyllochron mean value. Based on these results, Albion requires more degree-days to issue a leaf as compared to cv. Ventana. It was conclude that strawberry cultivars can be grown intercropped with fig trees (cv. Roxo de Valinhos).

Guavira emergence and seedling production with substrates containing organic compost and soil under different screen environments

This study aimed to evaluate different proportions of organic compost and soil as a substrate for the guavira emergence and seedling formation under different protected environments, in the high Pantanal region of the state of Mato Grosso do Sul. The seeds were placed in polyethylene bags (15 x 25 centimeters) filled with four percentages of organic compost (0%, 20%, 80%, and 100% of total volume) mixed with soil. These substrates were tested in agro-nurseries covered with black screen and 50% thermo-reflecting shade cloths. The substrate with 20% soil and 80% organic compost and the black screen shade cloth promote the best performance in the seedling production.

Paperirullan kannatushihnan kestoiän pidentäminen

Työn tavoitteena oli selvittää kannatushihnapituusleikkurissa paperin rullaukseen käytettävän kannatushihnan kestoikään vaikuttavia tekijöitä ja ratkaisuja liian lyhyeen kestoikään liittyviin ongelmiin. Työssä selvitettiin ensin kannatushihnatyyppisen pituusleikkurin toimintaa ja tarkemmin sen rullausosaa ja rullausprosessin parametreja. Kannatushihnan kestoikään vaikuttavia tekijöitä on käsitelty kirjallisuuden ja kohdeyrityksessä olevan materiaalin perusteella. Seuraavaksi esitettiin ideoita kannatushihnan rakenteesta ja materiaaleista sekä vertailtiin niitä keskenään ja nykyiseen hihnan rakenteeseen. Työssä tehtiin nykyistä kannatushihnaa simuloiva kaksiulotteinen elementtimalli. Tämän elementtimallin mukaan pituusleikkurin telojen suunnassa epätasainen hihnan kuluminen johtuu hihnan paksuussuuntaisten jännitysten eroista. Hihnan kulkua arvioitiin kokeellisesti kahdella erityyppisellä hihnalla. Hihnan kulkuun eniten vaikutti esikiristysvoima, jota pienennettäessä kehänopeusero paperirullaa simuloivan kuormittavan telan ja hihnatelan välillä pieneni. Työssä löydettiin mahdollinen yhteys rullauksessa tulostietona saatavan datan sekä hihnan geometrian välille. Polyeteenivaahtomuovit ovat kitkansa puolesta lupaavia hihnan kitkapinnoitteen materiaaliksi. Toisaalta polyeteenivaahtomuovien mekaanisia ominaisuuksia ei juuri tunneta, eikä niitä ole käytetty kulutuskestoa vaativissa sovelluksissa. Hihnan ulkopinnan kulumismekanismia ei täysin tunneta.

PEN as substrate for new solar cell technologies

The possible use of polyethylene naphthalate as substrate for low-temperature deposited solar cells has been studied in this paper. The transparency of this polymer makes it a candidate to be used in both substrate and superstrate configurations. ZnO:Al has been deposited at room temperature on top of PEN. The resulting structure PEN/ZnO:Al presented good optical and electrical properties. PEN has been successfully textured (nanometer and micrometer random roughness) using hot-embossing lithography. Reflector structures have been built depositing Ag and ZnO:Al on top of the stamped polymer. The deposition of these layers did not affect the final roughness of the whole. The reflector structure has been morphologically and optically analysed to verify its suitability to be used in solar cells.

Ribavirin Concentrations Do Not Predict Sustained Virological Response in HIV/HCV-Coinfected Patients Treated with Ribavirin and Pegylated Interferon in the Swiss HIV Cohort Study.

BACKGROUND: Ribavirin (RBV) is an essential component of most current hepatitis C (HCV) treatment regimens and still standard of care in the combination with pegylated interferon (pegIFN) to treat chronic HCV in resource limited settings. Study results in HIV/HCV-coinfected patients are contradicting as to whether RBV concentration correlates with sustained virological response (SVR). METHODS: We included 262 HCV treatment naïve HIV/HCV-coinfected Swiss HIV Cohort Study (SHCS) participants treated with RBV and pegIFN between 01.01.2001-01.01.2010, 134 with HCV genotype (GT) 1/4, and 128 with GT 2/3 infections. RBV levels were measured retrospectively in stored plasma samples obtained between HCV treatment week 4 and end of therapy. Uni- and multivariable logistic regression analyses were used to evaluate the association between RBV concentration and SVR in GT 1/4 and GT 2/3 infections. The analyses were repeated stratified by treatment phase (week 4-12, 13-24, >24) and IL28B genotype (CC versus CT/TT). RESULTS: SVR rates were 35.1% in GT 1/4 and 70.3% in GT 2/3 infections. Overall, median RBV concentration was 2.0 mg/L in GT 1/4, and 1.9 mg/L in GT 2/3, and did not change significantly across treatment phases. Patients with SVR had similar RBV concentrations compared to patients without SVR in both HCV genotype groups. SVR was not associated with RBV levels ≥2.0 mg/L (GT 1/4, OR 1.19 [0.5-2.86]; GT 2/3, 1.94 [0.78-4.80]) and ≥2.5 mg/L (GT 1/4, 1.56 [0.64-3.84]; GT 2/3 2.72 [0.85-8.73]), regardless of treatment phase, and IL28B genotype. CONCLUSION: In HIV/HCV-coinfected patients treated with pegIFN/RBV, therapeutic drug monitoring of RBV concentrations does not enhance the chance of HCV cure, regardless of HCV genotype, treatment phase and IL28B genotype.

A Lead-In with Silibinin Prior to Triple-Therapy Translates into Favorable Treatment Outcomes in Difficult-To-Treat HIV/Hepatitis C Coinfected Patients.

BACKGROUND: The efficacy of first-generation protease inhibitor based triple-therapy against hepatitis C virus (HCV) infection is limited in HIV/HCV-coinfected patients with advanced liver fibrosis and non-response to previous peginterferon-ribavirin. These patients have a low chance of achieving a sustained virologic response (SVR) using first generation triple-therapy, with a success rate of only 20%. We investigated the efficacy and safety of lead-in therapy with intravenous silibinin followed by triple-therapy in this difficult-to-treat patient group. METHODOLOGY: Inclusion criteria were HIV/HCV coinfection with advanced liver fibrosis and documented previous treatment failure on peginterferon-ribavirin. The intervention was a lead-in therapy with intravenous silibinin 20 mg/kg/day for 14 days, followed by triple-therapy (peginterferon-ribavirin and telaprevir) for 12 weeks, and peginterferon-ribavirin alone for 36 weeks. Outcome measurements were HCV-RNA after silibinin lead-in and during triple-therapy, SVR data at week 12, and safety and tolerability of silibinin. RESULTS: We examined sixteen HIV/HCV-coinfected patients with previous peginterferon-ribavirin failure, of whom 14 had a fibrosis grade METAVIR ≥F3. All were on successful antiretroviral therapy. Median (IQR) HCV-RNA decline after silibinin therapy was 2.65 (2.1-2.8) log10 copies/mL. Fifteen of sixteen patients (94%) had undetectable HCV RNA at weeks 4 and 12, eleven patients (69%) showed end-of-treatment response (i.e., undetectable HCV-RNA at week 48), and ten patients (63%) reached SVR at week 12 (SVR 12). Six of the sixteen patients (37%) did not reach SVR 12: One patient had rapid virologic response (RVR) (i.e., undetectable HCV-RNA at week 4) but stopped treatment at week 8 due to major depression. Five patients had RVR, but experienced viral breakthroughs at week 21, 22, 25, or 32, or a relapse at week 52. The HIV RNA remained below the limit of detection in all patients during the complete treatment period. No serious adverse events and no significant drug-drug interactions were associated with silibinin. CONCLUSION: A lead-in with silibinin before triple-therapy was safe and highly effective in difficult-to-treat HIV/HCV coinfected patients, with a pronounced HCV-RNA decline during the lead-in phase, which translates into 63% SVR. An add-on of intravenous silibinin to standard of care HCV treatment is worth further exploration in selected difficult-to-treat patients. TRIAL REGISTRATION: ClinicalTrials.gov NCT01816490.

Polymeerien erotus ultrasuodatuksella

Työssä selvitettiin suodatusolosuhteiden vaikutusta neutraalien polymeerien pidättymiseen niiden vesiliuoksia suodatettaessa. Suodatuksissa käytettiin kahta regeneroidusta selluloosasta valmistettua ultrasuodatuskalvoa (Microdyn-Nadir UC 030T ja JSC STC Vladipor C 30V). Malliaineina käytettiin polyetyleeniglykolia ja dekstraania. Kirjallisuusosassa esiteltiin aluksi lyhyesti ultrasuodatus erotusmenetelmänä. Lisäksi käsiteltiin ultrasuodatuskalvojen huokoskoon karakterisointimenetelmiä ja selvitettiin polymeerien erottumiseen ultrasuodatuksen aikana vaikuttavia tekijöitä. Työn kokeellisessa osassa tutkittiin paineen ja virtausnopeuden vaikutusta malliaineiden pidättymiseen ultrasuodatuskalvoilla. Lisäksi pyrittiin löytämään suodatusolosuhteet, joissa toinen aineista läpäisisi suodatuskalvon lähes täydellisesti toisen konsentroituessa syöttöliuokseen. Työssä myös määritettiin tutkimuksissa käytetyille kalvoille katkaisukoko, joka kuvaa kalvon kykyä pidättää moolimassaltaan erikokoisia molekyylejä. Lisäksi kokeellisessa osassa selvitettiin työssä käytettyjen kalvojen tasalaatuisuutta vertailemalla keskenään samanlaisissa suodatusolosuhteissa eri kalvopaloilla tehtyjen suodatusten tuloksia. Työssä saatiin erotettua kaksi lähes samankokoista malliaineeksi valittua neutraalia polymeeriä toisistaan siten, että toinen aine pidättyi kalvolla huomattavasti toista ainetta paremmin. Parhaimpaan erotustulokseen päästiin, kun permeaattivuo kalvon läpi oli noin 400 l/(m2 h). Tällöin suodatuspaine oli noin 2 bar ja virtausnopeus alle 2 m/s. Työn aikana määritettyjen katkaisukokojen havaittiin poikkeavan huomattavasti kalvojen valmistajien ilmoittamista arvoista, mutta olevan kuitenkin samaa suuruusluokkaa kuin muiden tutkimusryhmien vastaaville ultrasuodatuskalvoille esittämät arvot. Työn tulosten perusteella C 30V olisi hieman tasalaatuisempi kalvo kuin UC 030T.

Comparison of differential gene expression to water stress among bacteria with relevant pollutant-degradation properties.

Resistance to semi-dry environments has been considered a crucial trait for superior growth and survival of strains used for bioaugmentation in contaminated soils. In order to compare water stress programmes, we analyse differential gene expression among three phylogenetically different strains capable of aromatic compound degradation: Arthrobacter chlorophenolicus A6, Sphingomonas wittichii RW1 and Pseudomonas veronii 1YdBTEX2. Standardized laboratory-induced water stress was imposed by shock exposure of liquid cultures to water potential decrease, induced either by addition of solutes (NaCl, solute stress) or by addition of polyethylene glycol (matric stress), both at absolute similar stress magnitudes and at those causing approximately similar decrease of growth rates. Genome-wide differential gene expression was recorded by micro-array hybridizations. Growth of P. veronii 1YdBTEX2 was the most sensitive to water potential decrease, followed by S. wittichii RW1 and A. chlorophenolicus A6. The number of genes differentially expressed under decreasing water potential was lowest for A. chlorophenolicus A6, increasing with increasing magnitude of the stress, followed by S. wittichii RW1 and P. veronii 1YdBTEX2. Gene inspection and gene ontology analysis under stress conditions causing similar growth rate reduction indicated that common reactions among the three strains included diminished expression of flagellar motility and increased expression of compatible solutes (which were strain-specific). Furthermore, a set of common genes with ill-defined function was found between all strains, including ABC transporters and aldehyde dehydrogenases, which may constitute a core conserved response to water stress. The data further suggest that stronger reduction of growth rate of P. veronii 1YdBTEX2 under water stress may be an indirect result of the response demanding heavy NADPH investment, rather than the presence or absence of a suitable stress defence mechanism per se.

Suitability of human and mammalian cells of different origin for the assessment of genotoxicity of metal and polymeric engineered nanoparticles.

Nanogenotoxicity is a crucial endpoint in safety testing of nanomaterials as it addresses potential mutagenicity, which has implications for risks of both genetic disease and carcinogenesis. Within the NanoTEST project, we investigated the genotoxic potential of well-characterised nanoparticles (NPs): titanium dioxide (TiO2) NPs of nominal size 20 nm, iron oxide (8 nm) both uncoated (U-Fe3O4) and oleic acid coated (OC-Fe3O4), rhodamine-labelled amorphous silica 25 (Fl-25 SiO2) and 50 nm (Fl-50 SiO) and polylactic glycolic acid polyethylene oxide polymeric NPs - as well as Endorem® as a negative control for detection of strand breaks and oxidised DNA lesions with the alkaline comet assay. Using primary cells and cell lines derived from blood (human lymphocytes and lymphoblastoid TK6 cells), vascular/central nervous system (human endothelial human cerebral endothelial cells), liver (rat hepatocytes and Kupffer cells), kidney (monkey Cos-1 and human HEK293 cells), lung (human bronchial 16HBE14o cells) and placenta (human BeWo b30), we were interested in which in vitro cell model is sufficient to detect positive (genotoxic) and negative (non-genotoxic) responses. All in vitro studies were harmonized, i.e. NPs from the same batch, and identical dispersion protocols (for TiO2 NPs, two dispersions were used), exposure time, concentration range, culture conditions and time-courses were used. The results from the statistical evaluation show that OC-Fe3O4 and TiO2 NPs are genotoxic in the experimental conditions used. When all NPs were included in the analysis, no differences were seen among cell lines - demonstrating the usefulness of the assay in all cells to identify genotoxic and non-genotoxic NPs. The TK6 cells, human lymphocytes, BeWo b30 and kidney cells seem to be the most reliable for detecting a dose-response.

Compostos organolantanídeos contendo o ligante pirazinamida: síntese, caracterização e atividade catalítica na polimerização do etileno

In this work we report the synthesis of some organolanthanide compounds which were identified as LnCl2Cp(PzA)2, Ln = Nd, Sm, Eu and Tb, Cp = cyclopentadienyl and PzA = pirazinamide, by elemental analyses, complexometric titration with EDTA, thermal analyses and IR spectra. Thermal analysis and infrared spectra indicated that the coordination of the pyrazinamide to the lanthanide ions was made by the O atom of the carbonyl group and by one or both N atoms of the pyrazinamide ring. This class of compound showed catalytic activity of ca. 4.0 to 6.4 kgPE molLn-1 h-1 bar-1, in ethylene polymerization, using methylaluminoxane as cocatalyst. The resulting polyethylene presented low crystallinity (20%).

Um experimento de análise em fluxo envolvendo reações enzimáticas e quimiluminescência

An experiment is proposed to introduce some fundamentals of flow analysis, chemiluminescence and kinetic monitoring of enzymatic reactions in undergraduate courses. Chemiluminescence detection is performed with a simple spectrophotometer equipped with a lab-made spiral flow cell constructed from a polyethylene tube. The hydrogen peroxide produced by the glucose oxidation in the presence of glucose oxidase is continuously monitored by the reaction with luminol in alkaline media in a flow injection system. The exercise allows also the discussion of important analytical features and the comparison with different optical methods of analysis.

Synthesis and NMR characterization of aliphatic-aromatic copolyesters by reaction of poly(ethylene terephthalate) post-consumer and poly(ethylene adipate)

An aliphatic-aromatic copolyester of poly(ethylene terephthalate), PET, and poly(ethylene adipate), PEA, PET-co-PEA, was synthesized by the high temperature melt reaction of post-consumer PET and PEA. As observed by NMR spectroscopy, the reaction yielded random copolyesters in a few minutes through ester-interchange reactions, even without added catalyst. The copolyesters obtained in the presence of a catalyst presented higher intrinsic viscosity than that obtained without the addition of catalyst, due to simultaneous polycondensation and ester-interchange reactions. The structure of the aliphatic-aromatic copolyesters obtained in different PET/PEA ratio is random as observed by NMR analysis.

Research on the suitability of organosolv semi-chemical triticale fibers as reinforcement for recycled hdpe composites

The main objective of this research was to study the feasibility of incorporating organosolv semi-chemical triticale fibers as the reinforcing element in recycled high density polyethylene (HDPE). In the first step, triticale fibers were characterized in terms of chemical composition and compared with other biomass species (wheat, rye, softwood, and hardwood). Then, organosolv semi-chemical triticale fibers were prepared by the ethanolamine process. These fibers were characterized in terms of its yield, kappa number, fiber length/diameter ratio, fines, and viscosity; the obtained results were compared with those of eucalypt kraft pulp. In the second step, the prepared fibers were examined as a reinforcing element for recycled HDPE composites. Coupled and non-coupled HDPE composites were prepared and tested for tensile properties. Results showed that with the addition of the coupling agent maleated polyethylene (MAPE), the tensile properties of composites were significantly improved, as compared to non-coupled samples and the plain matrix. Furthermore, the influence of MAPE on the interfacial shear strength (IFSS) was studied. The contributions of both fibers and matrix to the composite strength were also studied. This was possible by the use of a numerical iterative method based on the Bowyer-Bader and Kelly-Tyson equations

Kaukojäähdytysverkon rakennevaihtoehdot

Kaukojäähdytyksellä tarkoitetaan keskitetysti tuotetun jäähdytysenergian jakamista kiinteistöihin jakeluverkossa kiertävän kylmän veden välityksellä, eli kaukojäähdytys on ulkoistettu jäähdytysratkaisu. Jäähdytysenergiaa tarvitaan työtehon, viihtyisyyden ja sisäilman laadun parantamiseksi, sekä joidenkin prosessien tarpeisiin. Siinä missä perinteinen kiinteistökohtainen jäähdytysjärjestelmä tuottaa jäähdytysenergian sähköllä, käytetään kaukojäähdytyksessä jäähdytysenergian tuottamiseen sellaisia resursseja, jotka muuten jäisivät käyttämättä. Tästä syystä kaukojäähdytys vähentää merkittävästi hiilidioksidipäästöjä, jonka lisäksi kaukojäähdytys vähentää kylmäkoneissa käytettävien kylmäaineiden aiheuttamia kasvihuonekaasupäästöjä. Kaukolämpöverkkoa muistuttavan kaukojäähdytysverkon rakentaminen vaatii suuria investointeja. Nykyisin jakeluverkon rakenteena käytetään 2Mpuk- rakennetta, jonka todettiin olevan teknistaloudellisesti soveltuvin vaihtoehto Helsingin Energian kaukojäähdytysverkkoon. Myös PE 100 putkia voitaisiin käyttää PN 16 paineluokassa alle DN 300 kokoluokkaa vastaavissa johdoissa, ja PN 10 paineluokassa alle DN 400 johdoissa. Kaukolämpöverkon paineluokan valinta vaikuttaa oleellisesti investointikustannuksiin PE- putkilla ja joillekin alueille kannattanee rakentaa alemman paineluokan omaava erillisverkko PE- putkista. Happidiffuusion kautta PE- putkista pääsee jonkin verran happea verkkoon, mutta määrät ovat melko pieniä, eikä muitakaan teknisiä esteitä hyvin korroosiota kestävien PE- putkien käytölle ole. 2Mpuk- rakenteelle suurimman riskin aiheuttaa elementtien liitoskohdista teräsputken pinnalle pääsevä ulkopuolinen vesi. Koska kaukojäähdytysjohdot ovat lisäksi yleensä ympäristöä kylmempiä, kondensoivat ne vettä pinnallensa kaukolämpöjohdoista poiketen. Ulkopuolisen veden aiheuttamaa riskiä voitaisiin pienentää eristämällä liitoskohdat sähkömuhveilla. Verkoston rakentamiskustannuksia ja liikenteelle aiheutuvia haittoja voidaan vähentää ojattomia rakentamismenetelmiä, kuten suuntaporausta käyttämällä.