Potentially bioavailable metals in sediment from a tropical polymictic environment-Rio Grande Reservoir, Brazil

Background, aim and scope Although many recent studies have focused on sediment potential toxicity, few of them were performed in tropical shallow aquatic environments. Those places can suffer short-time variations, especially due to water column circulations generated by changes in temperature and wind. Rio Grande reservoir is such an example; aside from that, it suffers various anthropogenic impacts, despite its multiple uses. Materials and methods This work presents the first screening step for understanding sediment quality from Rio Grande reservoir by comparing metal content using three different sediment quality guidelines. We also aimed at verifying any possible spatial heterogeneity. Results and discussion We found spatial heterogeneity varying according to the specific metal. Results showed a tendency for metals to remain as insoluble as metal sulfide (potentially not bioavailable), since sulfide was in excess and sediment physical-chemical characteristics contribute to sulfide maintenance (low redox potential, neutral pH, low dissolved oxygen, and high organic matter content). On the other hand, metal concentrations were much higher than suggested by Canadian guidelines and regional background values, especially Cu, which raises the risk of metal remobilization in cases of water circulation. Further study steps include the temporal evaluation of AVS/SEM, a battery of bioassays and the characterization of organic compounds.

Water quality assessment of Toledo River and determination of metal concentrations by using SR-TXRF technique

The region of Toledo River, Parana, Brazil is characterized by intense anthropogenic activities. Hence, metal concentrations and physical-chemical parameters of Toledo River water were determined in order to complete an environmental evaluation catalog. Samples were collected monthly during one year period at seven different sites from the source down the river mouth, physical-chemical variables were analyzed, and major metallic ions were measured. Metal analysis was performed by using the synchrotron radiation total reflection X-ray fluorescence technique. A statistical analysis was applied to evaluate the reliability of experimental data. The analysis of obtained results have shown that a strong correlation between physical-chemical parameters existed among sites 1 and 7, suggesting that organic pollutants were mainly responsible for decreasing the Toledo River water quality.

MPO Inhibitors Selected by Virtual Screening

The hemeprotein myeloperoxidase (MPO) participates in innate immune defense through its ability to generate potent microbicidal oxidants. However, these oxidants are also key mediators of the tissue damage associated with many inflammatory diseases. Thus, there is considerable interest in developing therapeutically useful MPO inhibitors. Here, we used structure-based drug design (SBDD) and ligand-based drug design (LBDD) to select for potentially new and selective MPO inhibitors. A pharmacophore model was developed based on the crystal structure of human MPO in complex with salicylhydroxamic acid (SHA), a known inhibitor of the enzyme. The pharmacophore model was used to screen the ZINC database for potential ligands, which were further filtered on the basis of their physical-chemical properties and docking score. The filtered compounds were visually inspected, and nine were purchased for experimental studies. Surprisingly, almost all of the selected compounds belonged to the aromatic hydrazide class, which had been previously described as MPO inhibitors. The compounds selected by virtual screening were shown to inhibit the chlorinating activity of MPO; the top four compounds displayed IC(50) values ranging from 1.0 to 2.8 mM. MPO inactivation by the most effective compound was shown to be irreversible. Overall, our results show that SBDD and LBDD may be useful for the rational development of new MPO inhibitors.

Synthesis and characterization of stable Co and Cd doped nickel hydroxide nanoparticles for electrochemical applications

The present paper describes the physical-chemical characterization and electrochemical behavior of a new nanomaterial formed by the addition of cadmium and cobalt atoms into the structure of nickel hydroxide nanoparticles, these ones synthesized by an easy sonochemical method. Particles of about 5 nm diameter were obtained and characterized by high resolution transmission electron microscopy (HRTEM), X-ray diffraction and Raman spectroscopy. Different nickel hydroxide nanoparticles were immobilized onto transparent conducting substrates by using electrostatic layer-by-layer providing thin films at the nanoscale and the electrochemical behavior was investigated. The formation of a mixed hydroxide was corroborated by observation of very interesting properties as redox potential shifting to less positive potentials and high stability when submitted to long electrochemical cycling or high times of ultrasonic synthesis, suggesting practical applications. (C) 2008 Elsevier B.V. All rights reserved.

Uncovering false positives on a virtual screening search for cruzain inhibitors

Some unexpected promiscuous inhibitors were observed in a virtual screening protocol applied to select cruzain inhibitors from the ZINC database. Physical-chemical and pharmacophore model filters were used to reduce the database size. The selected compounds were docked into the cruzain active site. Six hit compounds were tested as inhibitors. Although the compounds were designed to be nucleophilically attacked by the catalytic cysteine of cruzain, three of them showed typical promiscuous behavior, revealing that false positives are a prevalent concern in VS programs. (C) 2007 Elsevier Ltd. All rights reserved.

A cultura do girassol como estratégia de competitividade para o agronegócio regional e nacional: importância para a agroenergia e a alimentação

Equacionar aquecimento global, escassez de alimentos e a crescente necessidade energética, tornou-se, atualmente, o grande desafio mundial. Existem diversas culturas agrícolas que podem ser exploradas de maneira estratégica e assim colaborar com a solução deste problema. Dentre elas, pode-se destacar a cultura do girassol (Helianthus Annuus). O girassol é uma das quatro maiores culturas oleaginosas no mundo, cultivado com sucesso nos cinco continentes, ocupando uma área de cultivo superior a 22 milhões de hectares. A participação do Brasil nesse montante é inferior a 1%. Acredita-se que essa pequena participação se deva a fatores sócio-econômicos e tecnológicos. Salienta-se, porém que o Brasil, por suas vantagens comparativas naturais e vantagens competitivas construídas possui condições favoráveis para seu desenvolvimento. Diante dos fatos, o objetivo deste trabalho é aprofundar o conhecimento da cadeia produtiva do girassol e através de sua utilização como estratégia de competitividade, avaliar de maneira sistêmica os impactos na matriz agrícola do País. Dentre as inúmeras vantagens dessa cultura, pode-se destacar: características agronômicas, físicas, químicas, organolépticas e versatilidade, que permitem a utilização e otimização dos fatores de produção já disponíveis; época de plantio (adaptabilidade a diferentes condições edafoclimáticas), podendo ser cultivado desde o Rio Grande do Sul até o Estado de Roraima; sistema radicular (raiz pode chegar a dois metros de profundidade), permitindo o melhor aproveitamento dos nutrientes e da água do solo e promovendo a reciclagem de nutrientes; alto teor de óleo nas sementes (30% a 55%) e; alto valor comercial dos co-produtos. Esse conjunto de características é analisado sob a ótica da teoria das vantagens competitivas e das economias de escala e escopo, demonstrando que com inteligência e pragmatismo, a cultura do girassol pode repetir, com vantagens, o que a soja representou para o agronegócio brasileiro.

Caracterização da mutagênese por inserção do retrotransposon Tos17 em genótipos de arroz

O aumento do potencial produtivo da cultura de arroz via melhoramento genético está principalmente relacionado ao rendimento, a qualidade de grãos e a obtenção de plantas resistentes a doenças e pragas. Neste caso, deve ser explorada a variabilidade genética natural ou induzida através de agentes mutagênicos físicos, químicos ou biológicos. A vantagem do uso de mutagênicos biológicos, como os transposons e os retrotransposons, é que ao serem inseridos podem interrompem um gene causando uma mutação. Esta retrotransposição deixa uma marca que possibilita a identificação molecular do local de inserção. No presente trabalho, foi utilizada a estratégia de mutagênese insercional através de eventos de transposição do retrotransposon Tos17, induzido por cultura in vitro. A análise de diferentes genótipos de arroz é muito importante para avaliar se a transposição ocorre de forma similar em genótipos distintos. Foram avaliados calos embriogênicos de cultivares que têm um histórico de variabilidade genética em homozigose, linhagens obtidas através de cruzamentos com espécies silvestres e ecótipos de arroz vermelho, submetidos a 6 meses de cultura in vitro. O método escolhido para avaliar o número de cópias de Tos17 em calos embriogênicos foi a quantificação relativa por PCR em tempo real. A identificação dos genes mutados pela inserção do retrotransposon foi feita através do isolamento e amplificação das seqüências que flanqueiam os insertos de Tos17. O resultado deste experimento indica um aumento no número de cópias de Tos17 em 8 dos 21 genótipos avaliados. O seqüenciamento dos fragmentos de DNA que flanqueiam os insertos do retrotransposon Tos17, indicaram alta similaridade com seqüências genômicas não codificantes de arroz.

Beneficiamentos da cinza de casca de arroz residual com vistas à produção de cimento composto e/ou pozolânico

A cinza de casca de arroz é um resíduo agro-industrial decorrente do processo de queima da casca de arroz, sendo largamente encontrada no Rio Grande do Sul, pois, historicamente, este Estado é o maior produtor de arroz no Brasil, com cerca de 45% da produção nacional. Empregada como fonte de energia, a casca de arroz é queimada em diversas empresas; algumas, devido à sua natureza, incorporam a cinza ao produto, mas a maioria não encontra outro destino que não o descarte em forma de aterro, criando, assim, um problema ambiental de poluição do solo, do ar e de rios e córregos. No entanto, devido à presença de elevado percentual de sílica (SiO2) na sua constituição, a cinza de casca de arroz pode ter vários empregos. Na construção civil, pode ser empregada como pozolana, conforme vários estudos já vêm demonstrando. Porém, encontra restrições por motivos como sua cor escura, que confere aos cimentos, argamassas e concretos aos quais é adicionada, uma coloração também escura, e a falta de uniformidade apresentada em termos de características químicas e, principalmente, mineralógicas. A cor escura não é um problema de ordem técnica, mas estética e de aceitação no mercado. Já a composição mineralógica está associada à atividade pozolânica e a falta de uniformidade do material disponível implica na incerteza do grau de reatividade. Este trabalho teve o objetivo de verificar a viabilidade técnica do emprego de cinzas de casca de arroz residuais na confecção de cimentos Portland composto e/ou pozolânico, a partir de beneficiamentos das mesmas, que associam tratamentos físicos, químicos e/ou térmicos, os quais têm como finalidade reverter e/ou minimizar os aspectos negativos citados. Para tanto, foram empregadas três cinzas de casca de arroz, oriundas de diferentes processos de produção e com composições mineralógicas distintas. Após definidos os tratamentos a serem aplicados, através de seleção pelos critérios de cor e composição mineralógica, as cinzas tratadas foram avaliadas quanto à sua pozolanicidade, pelo Índice de Atividade Pozolânica (IAP) da NBR 5752 e também por um IAP alterado, proposto neste trabalho. A produção de cimentos com CCA beneficiada se deu a partir de um cimento base com substituição por CCA, em massa e em diferentes percentuais. Tais cimentos foram avaliados quanto à resistência à compressão, aos tempos de pega, à pozolanicidade e à expansibilidade a quente. A análise dos dados obtidos indica que os tratamentos propostos e/ou a associação deles resultam em beneficio no desempenho das cinzas, em pelo menos um dos vários aspectos considerados. A presente pesquisa permite concluir que as CCA residuais têm potencial para serem empregadas na produção de cimentos, tanto aquelas menos cristalinas, quanto as mais cristalinas. Para tanto, devem ser beneficiadas, sendo pelo menos submetidas a tratamento físico para redução de sua granulometria. Se outros objetivos forem pretendidos, como coloração clara, os tratamentos térmico ou químico podem ser empregados.

Segurança e gestão de riscos na atividade pericial

Os riscos fazem parte da vida das pessoas quaisquer que sejam suas profissões ou atividades. No caso dos policiais estes riscos são ampliados devido às situações as quais estão sujeitos e em particular no caso dos peritos criminais federais, que além dos relacionados às suas atividades policiais tem outras que são inerentes à perícia. Esta dissertação teve como objetivo identificar os principais riscos de segurança no ambiente de trabalho dos peritos criminais da Polícia Federal. A pesquisa, sob seu ponto de vista metodológico foi classificada quanto à sua natureza como aplicada; no tocante à abordagem do problema se classifica como qualitativa e quanto aos seus objetivos trata-se de pesquisa descritiva. A respeito dos procedimentos técnicos a pesquisa foi classificada como bibliográfica, pesquisa de levantamento e estudo de caso com aplicação na perícia criminal federal. Para tanto foram utilizados instrumentos de coleta de dados online os quais foram disponibilizados para peritos criminais de todas as áreas e unidades de federação. Os dados demonstraram que apesar de existirem diversos riscos relacionados com a atividade-fim pericial há outros com potencial para se transformarem em acidentes, principalmente os relacionados com questões policiais como abordagens, missões e operações. Os riscos foram mapeados por áreas da perícia utilizando-se como base a NR-5 que trata dos mapas de riscos. Com a pesquisa provocou-se a discussão a respeito dos riscos a que estão sujeitos os peritos e com isso criou-se uma conscientização da necessidade de tratamento dos mesmos. Com a participação dos peritos de todas as áreas de formação e unidades da federação, conseguiu-se numa perspectiva qualitativa identificar os principais riscos por grupos (físicos, químicos, biológicos, ergonômicos e de acidentes). Conclui-se que se faz necessário, em caráter de urgência, maior aprofundamento e discussões a respeitos dos riscos, bem como a criação de procedimentos mínimos a serem adotados para que os mesmos não se concretizem. A visão necessária para tratar estes riscos não pode ficar restrita a área pericial, mas precisa ser estendida para toda a Polícia Federal, e precisa ser inserida na filosofia, práticas e processos que permitam criar uma verdadeira cultura de gestão estratégica de riscos.

Avaliação ecotoxicológica de efluentes industriais utilizando Danio rerio Hamilton-Buchanan, 1822 (TELEOSTEI, CYPRINIDAE)

The industrial effluents are one of the main sources of water pollution. For an appropriate characterization and control of their discharges, the most efficient strategy is the integrated use of chemical, physical and ecotoxicological analyses. The aims of this study were to asses the efficiency of the treatment plant of a textile industry performing acute toxicity tests and physical-chemical analyses of the effluents before and after the treatment, besides evaluate the toxicity of the effluents of the Treatment System of Liquids Effluents (Sistema de Tratamento de Efluentes Líquidos - SITEL) of Distrito Industrial de Natal (DIN) and some of their physical-chemical variables. The species used in the ecotoxicological tests was the fish Danio rerio. The results showed that the treatment plant reduced significantly (around 50%) the toxicity of the raw textile effluent in only three of the seven tests but, in general, it promoted the reduction of the physical-chemical parameters analyzed. The toxicity and the physical-chemical factors of the effluents of SITEL of DIN varied among the tests and show the importance of monitoring their discharges in the Potengi river, one of the most important rivers of the Rio Grande do Norte state

Avaliação da qualidade da água do Rio Piranhas-Açu/RN utilizando a comunidade de macroinvertebrados bentônicos

The biomonitoring technique for water quality in water bodies has been incorporated increasingly in management of the natural resources, using mainly indices of its aquatic community characteristics. In Brazil the first efforts to use this technique was restricted to the South and the Midwest region of this country. Located in the northeast region, this study was conducted at Rio Grande do Norte state and had as main objective the assessment of water quality in the Piranhas-Açu river using benthic macroinvertebrates community as biological indicators. Thus, were applied two biotic indices, the BMWP (Biological Monitoring Working Party score system) and the IBF (Family Biotic Index). According the requirements of these indices, two periods of sampling were determined as basic methodology, in dry seasons of 2006 and 2007. The sampling sites were around the municipalities of Açu, Ipanguaçu, Alto do Rodrigues and Pendências. Physical-chemical measurements; a protocol of rapid assessment of diversity of habitats, and determination of the degree of tolerance of each taxon to organic pollution were also performed. The most abundant organisms found in the river were tolerant with the prevalence of Chironomidae (Diptera) and Melanoides tuberculata. This results, together with those ones got in indices application, showed a considerable organic pollution in the four sample places and the reaches were classified as modified to impacted. According to the used indices, this study suggest that this river have significant alteration in the biotic community and water quality on the organic pollution, and this fact, occurs in the reach of the river further downstream, where were expected a good water quality. Considering these results, measures aiming the conservation of this water body are needed regarding as it is inserted into a fragile ecosystem with dry season phenomenon, and the water of this river has extremely importance for the local economy

Demanda química de oxigênio, clorofila a e comunidade fitoplanctônica como indicadores da qualidade da água no Canal do Pataxó/RN

The current study examined spatial-temporal modifications and water quality through chemical and biotic indicators during both dry (January, February and November 2006) and wet seasons (March to June 2006). This study was carried out in Armando Ribeiro Gonçalves Reservoir, RN, Canal do Pataxó and after the water station treatment (WST). The physical-chemical parameters were measured in situ and inorganic nutrients, chlorophyll a and Free Oxygen Demand (FOD) were analyzed in laboratory conditions. Quali quantitative analyses of phytoplankton were carried out utilizing Sedgwick-Rafter camera. Results indicate that DQO concentrations were low. FOD concentrations in the reservoir were comparatively higher in the dry season (5.21 mgL-1; 5.64 mgL-1 e 6.05 mgL-1) in relation to the wet season (4.52 mgL-1; 4.12 mgL-1 e 4.92 mgL-1), in surface, intermediate and bottom waters, respectively. FOD values were inferior to 1.0mgL-1in both Canal do Pataxó and after WST, which is considered adequate for public use reservoirs. Although FOD concentrations were low, Armando Ribeiro Gonçalves Reservoir, Canal do Pataxó and WST were classified as euthophizied, mesotrophic ad oligotrophic, respectively, considering the Index of Trophic State Criteria. Chlorophyll a concentrations in the study reservoir were higher in the surface (199.2 µgL-1) during the wet season, whereas in Canal do Pataxó concentrations decreased from 1.56 µgL-1 to 0.028 µgL-1, and after WST values were low (0.059 µgL-1). Dominance of cianobacterias, such as Planktotrhix agardhii (dry season) and Microcystis sp (wet season) was registered in all three areas. In the reservoir and Canal do Pataxó, density of cianobacterias, such as P. agardhii and Microcistys sp., was superior to the values allowed by the Health ministry (HM). However, after WST, density values of cianobacteria were inferior to values established by the HM

Influência das espécies ativas na absorção de intersticiais durante a carbonitretação a plasma do TI

Physical-chemical properties of Ti are sensible to the presence of interstitial elements. In the case of thermochemical treatments plasma assisted, the influence of different active species is not still understood. In order to contribute for such knowledge, this work purposes a study of the role played by the active species atmosphere into the Ar N2 CH4 carbonitriding plasma. It was carried out a plasma diagnostic by OES (Optical Emission Spectroscopy) in the z Ar y N2 x CH4 plasma mixture, in which z, y and x indexes represent gas flow variable from 0 to 4 sccm (cm3/min). The diagnostic presents abrupt variations of emission intensities associated to the species in determined conditions. Therefore, they were selected in order to carry out the chemical treatment and then to investigate their influences. Commercial pure Ti disks were submitted to plasma carbonitriding process using pre-established conditions from the OES measurements while some parameters such as pressure and temperature were maintained constant. The concentration profiles of interstitial elements (C and N atoms) were determined by Resonant Nuclear Reaction Analysis (NRA) resulting in a depth profile plots. The reactions used were 15N(ρ,αγ)12C and 12C(α,α)12C. GIXRD (Grazing Incidence X-Ray Diffraction) analysis was used in order to identify the presence of phases on the surface. Micro-Raman spectroscopy was used in order to qualitatively study the carbon into the TiCxN1 structure. It has been verified which the density species effectively influences more the diffusion of particles into the Ti lattice and characteristics of the layer formed than the gas concentration. High intensity of N2 + (391,4 nm) and CH (387,1 nm) species promotes more diffusion of C and N. It was observed that Hα (656,3 nm) species acts like a catalyzer allowing a deeper diffusion of nitrogen and carbon into the titanium lattice.

Síntese de pigmentos cerâmicos inorgânicos nanométricos e encapsulados com estrutura core-shell pela rota dos precursores poliméricos

The present work has as objective the development of ceramic pigments based in iron oxides and cobalt through the polymeric precursor method, as well as study their characteristics and properties using methods of physical, chemical, morphological and optical characterizations.In this work was used iron nitrate, and cobalt citrate as precursor and nanometer silica as a matrix. The synthesis was based on dissolving the citric acid as complexing agent, addition of metal oxides, such as chromophores ions and polymerization with ethylene glycol. The powder obtained has undergone pre-ignition, breakdown and thermal treatments at different calcination temperatures (700 °C, 800 °C, 900 °C, 1000 °C and 1100 °C). Thermogravimetric analyzes were performed (BT) and Differential Thermal Analysis (DTA), in order to evaluate the term decomposition of samples, beyond characterization by techniques such as BET, which classified as microporous materials samples calcined at 700 ° C, 800 º C and 900 º C and non-porous when annealed at 1000 ° C and 1100 º C, X-ray diffraction (XRD), which identified the formation of two crystalline phases, the Cobalt Ferrite (CoFe2O4) and Cristobalite (SiO2), Scanning Electron Microscopy (SEM) revealed the formation of agglomerates of particles slightly rounded;and Analysis of Colorimetry, temperature of 700 °C, 800 °C and 900 °C showed a brown color and 1000 °C and 1100 °C violet

Influência da adição de cálcio nas propriedades de pastas geopoliméricas destinadas a cimentação de poços de petróleo

Nowadays, the search for new technologies that are able to follow the upcoming challenges in oil industry is a constant. Always trying properties improvements of the used materials, looking for the best performance and greater life time. Besides the search for technologies that show an improvement of performance, the search for materials environmentally correct along the whole production process. In Oil well cementing, this search for new technologies passes through the development of slurry systems that support these requests and that are also environmentally friendly. In this context, the use of geopolymer slurries is a great alternative route to cementing oil wells. Besides having good properties, comparable to Portland cement slurries, this alternative material releases much less CO2 gas in the production of their root materials when compared the production of Portland cement, which releases tons of CO2. In order to improve the properties of geopolymer slurries has been added Calcium Oxide, as observed in other studies that slurries where the Calcium is present the values of compressive strength is greater. The addition has been realized based in the CaO/SiO2 molar ratio of 0.05, 0.10 and 0.15. Have been performed compressive strength tests, thickening time, rheology and fliud loss control test of the slurries, following NBR 9831, as well as the physical chemical characterization of XRD, SEM and TG. Has been observed in most of the tests the slurries follow a tendency until the ratio of 0.10, which inverses in the ratio 0.15. This behavior can be explained by two phenomena that occur simultaneously, the first one is the break of the polymer chains and a consequent increase in molucules mobility, which prevails until the ratio of 0.1, and the second is possible approach of the chains due to the capacity of the calcium ions stabilize the charges of two different aluminum. There is only one linearity in the mechanical behavior that can be attributed to the appereance of the C-S-H phase. Based on this, it is concluded that the phenomenon of breaking the polymer chains predominates until the ratio of 0.1, causing an increase of the filtrate volume, lower rheological parameters and increasing thickening time. From the ratio of 0.15 the approach of the chains predominates, and the behavior is reversed