Standard Essential Patent in Telecommunication Standard: United States and China Comparison

Thesis (Ph.D.)--University of Washington, 2016-08

Opening Up Our Finding Aids: A Forum Discussion of © and CC Licenses

Presentation from the MARAC conference in Roanoke, VA on October 8–10, 2015. S13. “Un session” I: A MARAC Mini-Unconference.

Topographical map of Jersey City, Hoboken, and the adjacent country : describing minutely the courses of rivers and brooks, the township and original patent lines, railways, turnpike, carriage and bridle roads, the present farm boundaries with the names of their proprietors : a correct plan of public grounds and gentlemen's country seats, the position of farm houses, forests, swamps, and marshes, showing a complete view of the face of the country /

Shows cadastral and topographic data (land tracts with proprietors' names) in unurbanized areas.

Invención e innovación tecnológica en el ciclismo en España a través de la documentación de patentes : 1826-1929

El objetivo general de esta investigación consiste en sacar a la luz un conjunto de documentos, los documentos de patentes presentadas en España, sobre un tema concreto, la bicicleta y el ciclismo, y durante un periodo determinado, 1826-1929, presentes en la Oficina Española de Patentes y Marcas (OEPM), organizando esta documentación para su posterior utilización por la comunidad científica. Para ello se han identificado y sistematizado las patentes referidas a la bicicleta, presentadas entre 1826 y 1929, realizando tablas de frecuencia que permitan extraer datos de su incidencia en la invención en el periodo considerado. Ello ha permitido conocer una serie de datos de los inventores, que, en definitiva son los creadores del desarrollo tecnológico en este campo, extrayendo, ordenando y categorizando la información sobre lugar de origen, tipo de inventor (empresa o particular), sexo, práctica de colaboración y profesión. Finalmente se ha estudiado el tipo de inventos, mostrando los sectores en los que se producen las invenciones, identificando si se han puesto en práctica, y determinando aspectos tales como su carácter de invención incremental, su posible consideración como invento raro y curioso, y su coexistencia con una marca registrada. El trabajo se inicia con la introducción seguida de un apartado en el que se presenta el marco teórico en el que se desarrolla la investigación, en una doble vía: en primer lugar el contexto de los documentos de patente, su relación con la innovación y su utilidad como fuentes de información, y en segundo lugar el marco de la invención en el ciclismo, presentando las fases esenciales de la evolución de la bicicleta (capítulo 2). En el marco metodológico (capítulo 3) se explican fuentes y metodología, presentando a continuación el diseño de la investigación, que se resume como sigue: 1- Determinación del universo de datos, 2- Consulta en el Archivo Histórico de la OEPM, 3- Diseño y creación de la base de datos propia, 4- Consulta de los expedientes y toma de imágenes, 5- Tratamiento y análisis de los datos, 6- Búsqueda de información en fuentes para patentes extranjeras, y 7- Consulta a la base de datos de Marcas de la OEPM. El capítulo 4 está dedicado a la investigación propiamente dicha, estructurado en tres grandes bloques. El primero recoge las cuantificaciones tabuladas del total de patentes y el análisis de determinados aspectos generales como la cronología de la invención y diversas comparaciones con resultados obtenidos en otros trabajos. El segundo bloque está centrado en los estudios de solicitantes de patentes, protagonistas de las invenciones. De ellos se contemplan una serie de datos extraídos de los expedientes, y posteriormente tabulados y cuantificados: su procedencia geográfica, su adscripción como empresas o solicitantes particulares, y sus datos de colaboración, finalizando el bloque con un apartado que dedicamos a la innovación femenina, que consideramos una línea de investigación interés. El tercer bloque, el más amplio de todos, está dedicado a la descripción y análisis de los datos referidos a los propios inventos, puesto que es la aplicación de los inventos lo que marca el desarrollo tecnológico de la máquina bicicleta, y su consiguiente evolución histórica y social. Se estructura asimismo en varias secciones. La primera es la más amplia, donde se muestran y explican los datos que tienen que ver con la adscripción de los inventos a sectores temáticos, es decir, que desarrolla las funciones o componentes de la bicicleta que han sido objeto de invención. Los apartados siguientes muestran datos y consideraciones sobre las patentes puestas en práctica, las invenciones incrementales, los inventos curiosos, y las patentes con posible marca registrada de su nombre. Finalmente, las conclusiones del estudio, el establecimiento de posibles líneas abiertas de investigación, la relación de fuentes consultadas y los anexos cerrarán la exposición de esta tesis. ABSTRACT The main goal of this research thesis is to shed light on a specific documentary record: patents presented in Spain, regarding a specific theme: bicycles and cycling, within a given period: 1826-1929. This record is organized for the ulterior use by the scientific community. In order to carry out this goal, the mentioned patents have been identified and systematized, and analyzed for frequency in order to infer the incidence of its invention in the period under consideration. This has brought to light some information on the inventors which are, after all, the creators in the technological development of that field. Their bibliographical information: origin, type of inventor (company or individual), gender, collaboration behavior and profession. Finally, the type of inventions has been studied, showing the sectors in which inventions are produced, whether these were transferred to practice, and other key information like the incremental nature of their invention, their possible consideration as ‘rare or curious invention’, and their coexistence with a registered trademark. This thesis is organized with an initial introduction, after which a section outlines the theoretical framework for the research along two axes: first the context of the patent documents, their relation with innovation and their usefulness as information sources; second, the invention of cycling and the development phases of bicycles. In the methodological section the sources and methodology are explained and reasoned, followed by the research design: 1-determination of the data universe, 2-consultation at the historical archive of the OEPM (National Patent Office), 3-design and creation of a database, 3-analysis of the files and image catchment, 5-treatment and analysis of data, 6-browsing of source information for foreign patents, and 7-consultation of the trademark information at the OEPM. Chapter 4 is dedicated to research itself, in three main sections. The first one has the quantification of the patent total in tables and the analysis of specific overall chronological aspects of the invention, and some comparisons with the results obtained in other research. The second section is centered on the studies of patent requests and inventors. Some data extracted from the files has been systematized: geographical origin, adscriptions as companies or individuals, and their collaboration data, ending with a sub-section on women’s invention, which we consider an interesting research line. The third section, the biggest one of them all, is dedicated to the description and analysis of the data referred to the inventions themselves, because it is the application of the inventions which constitutes the technological development of the bicycle, and therefore its historical and social evolution. It is also structured in various sub-sections. The first one is the longest one, with information regarding the thematic typology of the inventions: functions and bicycle components which are innovated. The other ensuing subsections study patents which were actually incorporated and used, incremental inventions, curious inventions and patents with possible associated trademarks. Finally, the study conclusions, the establishment of lines of potential further research, the references used, and the annexes which culminate the thesis exposition.

TRIPS and Special & Differential Treatment – Revisiting the Case for Derogations in Applying Patent Protection for Pharmaceuticals in Developing Count

In this paper we apply an implicit threshold approach, malleable to the principle of graduation, to identify countries that should benefit from derogations from WTO TRIPS commitments for pharmaceutical patents under the tenets of Special and Differential Treatment. This is based on the identification of four broad constraints loosely classified as; economic constraints; access topharmaceuticals; capacity constraints; and incidence of health outcomes. We identify these by means of analytical criteria and create a composite index that ranks countries according to the observed constraints which delimit the capabilities and desirability of implementing TRIPs disciplines. We discuss the use of negotiated weights and thresholds in determining participation and graduation into general provisions of the agreement. It follows that countries below the chosen threshold should be exempt from these hence receiving Special and Differential Treatment.

Is there a case to be made for a global patent system? The example of plant biotechnology

The assessment of patterns of patentability in plant biotechnology on the basis of existing statistics shows a considerable concentration of patents to a few countries, in particular the United States, Australia, Japan, China, Mexico, Brazil, Germany, Canada, New Zealand, South Korea, India, Spain and Hungary. These patterns suggest that there is a clear relationship between the choice of patent jurisdictions and the biotechnology regulatory framework. This observation of the geographic distribution of biotechnology patents lends credence to maintaining a system of territorial rights that allow for regulatory competition, but continuing the process of substantive patent law harmonization which potentially minimize trade barriers.

High-Dose Oral Ibuprofen in Treatment of Patent Ductus Arteriosus in Full-Term Neonates

Background: Patent ductus arteriosus (PDA) is an important risk for heart failure due to left to right shunt in term neonates. Objectives: In this study, we evaluated the effect of high dose ibuprofen in closure of PDA in term neonates. Patients and Methods: We used double dose ibuprofen (20 mg/kg, 10 mg/kg, and 10 mg/kg) for 3 - 30 day old term neonates with PDA who were admitted in the neonatal wards of Shiraz University of Medical Sciences. The results of this study were compared to the data of the previous study in our center which used the low dose of ibuprofen (10 mg/kg, 5 mg/kg, and 5 mg/kg). Results: 29 full term neonates received high-dose ibuprofen, in 18 neonates, PDA was closed after 4 days (62.1% versus 43.3% for the standard dose and 4.7% for the control group in the previous study) (P = 0.001). The results showed no significant correlation between the closure rate and gestational age, postnatal age, sex, and weight. In the 4th day of treatment, size of the pulmonic end of ductus arteriosus decreased from 2.09 mm to 0.77 mm compared to 1.68 mm to 0.81 mm in the standard dose of oral ibuprofen and 2.1 mm to 1.4 mm in the control group (P = 0.046). Conclusions: This study indicated that high-dose oral ibuprofen was more effective in closing or decreasing the size of PDA.

Treatment trials for neonatal seizures: the effect of design on sample size

Neonatal seizures are common in the neonatal intensive care unit. Clinicians treat these seizures with several anti-epileptic drugs (AEDs) to reduce seizures in a neonate. Current AEDs exhibit sub-optimal efficacy and several randomized control trials (RCT) of novel AEDs are planned. The aim of this study was to measure the influence of trial design on the required sample size of a RCT. We used seizure time courses from 41 term neonates with hypoxic ischaemic encephalopathy to build seizure treatment trial simulations. We used five outcome measures, three AED protocols, eight treatment delays from seizure onset (Td) and four levels of trial AED efficacy to simulate different RCTs. We performed power calculations for each RCT design and analysed the resultant sample size. We also assessed the rate of false positives, or placebo effect, in typical uncontrolled studies. We found that the false positive rate ranged from 5 to 85% of patients depending on RCT design. For controlled trials, the choice of outcome measure had the largest effect on sample size with median differences of 30.7 fold (IQR: 13.7–40.0) across a range of AED protocols, Td and trial AED efficacy (p<0.001). RCTs that compared the trial AED with positive controls required sample sizes with a median fold increase of 3.2 (IQR: 1.9–11.9; p<0.001). Delays in AED administration from seizure onset also increased the required sample size 2.1 fold (IQR: 1.7–2.9; p<0.001). Subgroup analysis showed that RCTs in neonates treated with hypothermia required a median fold increase in sample size of 2.6 (IQR: 2.4–3.0) compared to trials in normothermic neonates (p<0.001). These results show that RCT design has a profound influence on the required sample size. Trials that use a control group, appropriate outcome measure, and control for differences in Td between groups in analysis will be valid and minimise sample size.

In step

In Step was a wearable artwork consisting of a pair of embroidered foot bandages and an actuator ‘cushion’ embedded with 15 electromechanical actuator pistons. The bandage was embedded with woven, soft and flexible fabric sensors - interconnected with metallic connecting threads, fasteners and a wireless interface (in a final form). When wrapped around a foot and lower leg the sensors sat on the ball of the toes and heel. This ‘wearable interface’ was then connected wirelessly to a soft sculptural form, which employed actuators to tap gently in response to the qualities of the walk detected by the soft sensors. In this way the ‘tread qualities’ of the walker could then be felt by someone else holding this device against their stomach – thereby allowing pairs of participants to ‘feel’ the tactile qualities of the other's walk. The work was presented both as a working object and via a short videorecorded performance.----- In Step generated innovative new approaches to interface and sensor embedded clothing/footware whilst also creating an evocative vehicle to comment upon contemporary Post Colonial theories of weight and groundedness – particularly the psycho-geographical ‘separation’ from the landscape that inspired Paul Carter’s “environmentally grounded poetics”. The work’s final form also suggested critical new directions for responsive clothing and footwear for the emerging genre of smart textiles.

Sounds of the suburb

Sounds of the Suburb was a commissioned public art proposal based upon a brief set by Queensland Rail for the major redevelopment at their Brunswick Street Railway Station, Fortitude Valley, Brisbane. I proposed a large scale, electronic artwork to be distributed across the glass fronted structure of their station’s new concourse building. It was designed as a network of LED based ‘tracking’ - along which would travel electronically animated, ‘trains’ of text synchronised to the actual train timetables. Each message packet moved endlessly through a complex spatial network of ‘tracks’ and ‘stations’ set both inside, outside and via the concourse. The design was underpinned by large scale image of sound waves etched onto the architecture’s glass and was accompanied by two inset monitors each presenting ghosted images of passenger movements within the concourse, time-delay recorded and then cross-combined in realtime to form new composites.----- Each moving, reprogrammable phrase was conceived as a ‘train of thought’ and ostensibly contained an idea or concept about popular cultures surrounding contemporary music – thereby meeting the brief that the work should speak to the diverse musical cultures central to Fortitude Valley’s image as an entertainment hub. These cultural ‘memes’, gathered from both passengers and the music press were situated alongside quotes from philosophies of networking, speed and digital ecologies. These texts would continually propagate, replicate and cross fertlise as they moved throughout the ‘network’, thereby writing a constantly evolving ‘textual soundcape’ of that place. This idea was further cemented through the pace, scale and rhythm of passenger movements continually recorded and re-presented on the smaller screens.

Whisper our futures

Whisper Our Futures was an invited design proposal to produce a major public artwork for the State of Queensland’s 150th Anniversary Celebrations. It involved a network of 100 individual scrolling digital text boxes each with individual audio systems arranged together in a tessellated format. This form (specified by the originating brief) both mimicked the soaring gothic arches typical of Queensland cathedrals and was also suggestive of their stained glass windows. Each text module presented a message in both visual and audible forms for Queenslanders living 150 years hence - spoken both by the general public aw well as prominent figures. In this way the work was designed as a focus of future hope, historical reflection and inspiration to visitors to Queensland cathedrals throughout the entire year of celebrations (2009). The work was planned to premiere at Brisbane’s main Anglican Cathedral and then tour to nine other state cathedrals throughout 2009.---- Two staged proposals and budgets were invited throughout 2007. After the second successful proposal stage the State Premier and cabinet changed, ultimately leading the public art components to be dropped from the program. The proposal currently remains on file at the Queensland Premiers Office.

Access all

Access All was performance produced following a three-month mentorship in web-based performance that I was commissioned to conduct for the performance company Igneous. This live, triple-site performance event for three performers in three remote venues was specifically designed for presentation at Access Grid Nodes - conference rooms located around the globe equipped with a high end, open source computer teleconferencing technology that allowed multiple nodes to cross-connect with each other. Whilst each room was setup somewhat differently they all deployed the same basic infrastructre of multiple projectors, cameras, and sound as well as a reconfigurable floorspace. At that time these relatively formal setups imposed a clear series of limitations in terms of software capabilities and basic infrastructure and so there was much interest in understanding how far its capabilities might be pushed.----- Numerous performance experiments were undertaken between three Access Grid nodes in QUT Brisbane, VISLAB Sydney and Manchester Supercomputing Centre, England, culminating in the public performance staged simultaneously between the sites with local audiences at each venue and others online. Access All was devised in collaboration with interdisciplinary performance company Bonemap, Kelli Dipple (Interarts curator, Tate Modern London) and Mike Stubbs British curator and Director of FACT (Liverpool).----- This period of research and development was instigated and shaped by a public lecture I had earlier delivered in Sydney for the ‘Global Access Grid Network, Super Computing Global Conference’ entitled 'Performance Practice across Electronic Networks'. The findings of this work went on to inform numerous future networked and performative works produced from 2002 onwards.

Knowmore (House of Commons)

Knowmore (House of Commons) is a large scale generative interactive installation that incorporates embodied interaction, dynamic image creation, new furniture forms, touch sensitivity, innovative collaborative processes and multichannel generative sound creation. A large circular table spun by hand and a computer-controlled video projection falls on its top, creating an uncanny blend of physical object and virtual media. Participants’ presence around the table and how they touch it is registered, allowing up to five people to collaboratively ‘play’ this deeply immersive audiovisual work. Set within an ecological context, the work subtly asks what kind of resources and knowledges might be necessary to move us past simply knowing what needs to be changed to instead actually embodying that change, whilst hinting at other deeply relational ways of understanding and knowing the world. The work has successfully operated in two high traffic public environments, generating a subtle form of interactivity that allows different people to interact at different paces and speeds and with differing intentions, each contributing towards dramatic public outcomes. The research field involved developing new interaction and engagement strategies for eco-political media arts practice. The context was the creation of improved embodied, performative and improvisational experiences for participants; further informed by ‘Sustainment’ theory. The central question was, what ontological shifts may be necessary to better envision and align our everyday life choices in ways that respect that which is shared by all - 'The Commons'. The methodology was primarily practice-led and in concert with underlying theories. The work’s knowledge contribution was to question how new media interactive experience and embodied interaction might prompt participants to reflect upon the kind of resources and knowledges required to move past simply knowing what needs to be changed to instead actually embodying that change. This was achieved through focusing on the power of embodied learning implied by the works' strongly physical interface (i.e. the spinning of a full size table) in concert with the complex field of layered imagery and sound. The work was commissioned by the State Library of Queensland and Queensland Artworkers Alliance and significantly funded by The Australia Council for the Arts, Arts Queensland, QUT, RMIT Centre for Animation and Interactive Media and industry partners E2E Visuals. After premiering for 3 months at the State Library of Queensland it was curated into the significant ‘Mediations Biennial of Modern Art’ in Poznan, Poland. The work formed the basis of two papers, was reviewed in Realtime (90), was overviewed at Subtle Technologies (2010) in Toronto and shortlisted for ISEA 2011 Istanbul and included in the edited book/catalogue ‘Art in Spite of Economics’, a collaboration between Leonardo/ISAST (MIT Press); Goldsmiths, University of London; ISEA International; and Sabanci University, Istanbul.

Through the clock's workings

Through the Clock’s Workings is a world first: a remixed and remixable anthology of literature.----- Prominent Australian authors have written new short stories and released them under a Creative Commons Attribution Non-Commercial ShareAlike licence. What that means is you can remix the stories, but only if you acknowledge the author, the remix is not for commercial use, and your new work is available for others to remix. The authors’ stories were made available on our website and new and emerging writers were invited to create their own remixes to be posted on the website and considered for publication in the print anthology alongside the original stories.----- The result is a world first: a remixed and remixable anthology of literature. Buy your copy now from the Sydney University Press eStore or download the electronic version.----- So how do you use a remixable anthology? Simple.----- Step 1 - Read. Thumb your way through the pages at will. Find the stories you love, the ones you hate, the ones that could be better.----- Step 2 - Re/create. Each story is yours to share and to remix. Use only one paragraph or character or just make subtle changes. Change the genre, alter its formal or stylistic characteristics, or revise its message. Use as little or as much as you like - as long as it works.----- Step 3 - Share. Be part of a growing community of literature remixing. Email your remix to us and start sharing. The entire anthology can be remixed - the original stories, the remixes, and even the fonts.----- Through the Clock’s Workings is Read&Write!