Low severity Fischer-Tropsch synthesis for the production of synthetic hydrocarbon fuels

Currently, the main source for the production of liquid transportation fuels is petroleum, the continued use of which faces many challenges including depleting oil reserves, significant oil price rises, and environmental concerns over global warming which is widely believed to be due to fossil fuel derived CO2 emissions and other greenhouse gases. In this respect, lignocellulosic or plant biomass is a particularly interesting resource as it is the only renewable source of organic carbon that can be converted into liquid transportation fuels. The gasification of biomass produces syngas which can then be converted into synthetic liquid hydrocarbon fuels by means of the Fischer-Tropsch (FT) synthesis. This process has been widely considered as an attractive option for producing clean liquid hydrocarbon fuels from biomass that have been identified as promising alternatives to conventional fossil fuels like diesel and kerosene. The resulting product composition in FT synthesis is influenced by the type of catalyst and the reaction conditions that are used in the process. One of the issues facing this conversion process is the development of a technology that can be scaled down to match the scattered nature of biomass resources, including lower operating pressures, without compromising liquid composition. The primary aims of this work were to experimentally explore FT synthesis at low pressures for the purpose of process down-scaling and cost reduction, and to investigate the potential for obtaining an intermediate FT synthetic crude liquid product that can be integrated into existing refineries under the range of process conditions employed. Two different fixed-bed micro-reactors were used for FT synthesis; a 2cm3 reactor at the University of Rio de Janeiro (UFRJ) and a 20cm3 reactor at Aston University. The experimental work firstly involved the selection of a suitable catalyst from three that were available. Secondly, a parameter study was carried out on the 20cm3 reactor using the selected catalyst to investigate the influence of reactor temperature, reactor pressure, space velocity, the H2/CO molar ratio in the feed syngas and catalyst loading on the reaction performance measured as CO conversion, catalyst stability, product distribution, product yields and liquid hydrocarbon product composition. From this parameter study a set of preferred operating conditions was identified for low pressure FT synthesis. The three catalysts were characterized using BET, XRD, TPR and SEM. The catalyst selected was an unpromoted Co/Al2O3 catalyst. FT synthesis runs on the 20cm3 reactor at Aston were conducted for 48 hours. Permanent gases and light hydrocarbons (C1-C5) were analysed in an online GC-TCD/FID at hourly intervals. The liquid hydrocarbons collected were analyzed offline using GC-MS for determination of fuel composition. The parameter study showed that CO conversion and liquid hydrocarbon yields increase with increasing reactor pressure up to around 8 bar, above which the effect of pressure is small. The parameters that had the most significant influence on CO conversion, product selectivity and liquid hydrocarbon yields were reactor temperature and catalyst loading. The preferred reaction conditions identified for this research were: T = 230ºC, P = 10 bar, H2/CO = 2.0, WHSV = 2.2 h-1, and catalyst loading = 2.0g. Operation in the low range of pressures studied resulted in low CO conversions and liquid hydrocarbon yields, indicating that low pressure BTL-FT operation may not be industrially viable as the trade off in lower CO conversions and once-through liquid hydrocarbon product yields has to be carefully weighed against the potential cost savings resulting from process operation at lower pressures.

QoS guarantee with adaptive transmit power and message rate control for DSRC vehicle network based road safety applications

Quality of services (QoS) support is critical for dedicated short range communications (DSRC) vehicle networks based collaborative road safety applications. In this paper we propose an adaptive power and message rate control method for DSRC vehicle networks at road intersections. The design objective is to provide high availability and low latency channels for high priority emergency safety applications while maximizing channel utilization for low priority routine safety applications. In this method an offline simulation based approach is used to find out the best possible configurations of transmit power and message rate for given numbers of vehicles in the network. The identified best configurations are then used online by roadside access points (AP) according to estimated number of vehicles. Simulation results show that this adaptive method significantly outperforms a fixed control method. © 2011 Springer-Verlag.

Creating gusto through games and goals

Goal-based learning (GBL) has long been used for teaching (Schank and Kass, 1996) and training (Collins, 1994), and game playing is also very widely used (Fudenberg and Levine, 1998). When both are used together it can become a winning combination that focuses students? attention, dismisses precepts about a subject, lowers barriers to preferred learning-styles and open minds to new tools, ideas and concepts. The combination can be achieved using basic traditional physical props (e.g. pens and paper) or advanced internet technology. This report briefly describes an offline and online approach and then summarises some of the main benefits to be gained from combining games and goals to get students going in the right pedagogical direction.

Victims of cyberstalking:an exploratory study of harassment perpetrated via the Internet

This paper describes the first study to focus exclusively on the prevalence and impact of cyberstalking. A Web-based questionnaire was used to collect data from a group of respondents who were recruited by snowball sampling via e-mail. A total of 169 respondents completed the questionnaire. The results of the study found that approximately a third of respondents might be considered victims of cyberstalking. Furthermore, when asked to indicate the level of distress felt as a result of their experiences, almost a quarter of respondents chose a value of ten on a ten-point scale. The study also suggests a number of differences between cyberstalking and offline stalking, for instance cyberstalking tends to take place over a shorter period of time than offline stalking and cyberstalking victims are less likely to know the identify of their harassers. These differences add weight to the argument that cyberstalking should be seen as a new form of deviant behaviour that can be distinguished from offline stalking. The work concludes by emphasising a need for further research.

An exploration of predatory behaviour in cyberspace:towards a typology of cyberstalkers

Over the last few years governments, law enforcement agencies, and the media have noted increases of online harassment. Although there has been a great deal of research into 'offline stalking', at this moment in time there has been no formal research that attempts to classify cyberstalkers. This study aimed to identify a classification of cyberstalkers by interviewing victims. Twenty-four participants were interviewed and their responses logged on a 76-item Cyberstalking Incident Checklist. A typology of cyberstalkers was developed.

TEST:a tropic, embodied, and situated theory of cognition

TEST is a novel taxonomy of knowledge representations based on three distinct hierarchically organized representational features: Tropism, Embodiment, and Situatedness. Tropic representational features reflect constraints of the physical world on the agent's ability to form, reactivate, and enrich embodied (i.e., resulting from the agent's bodily constraints) conceptual representations embedded in situated contexts. The proposed hierarchy entails that representations can, in principle, have tropic features without necessarily having situated and/or embodied features. On the other hand, representations that are situated and/or embodied are likely to be simultaneously tropic. Hence, although we propose tropism as the most general term, the hierarchical relationship between embodiment and situatedness is more on a par, such that the dominance of one component over the other relies on the distinction between offline storage versus online generation as well as on representation-specific properties. © 2013 Cognitive Science Society, Inc.

Triggering trust:to what extent does the question influence the answer when evaluating the perceived importance of trust triggers?

Trust is a critical component of business to consumer (B2C) e-Commerce success. In the absence of typical environmental cues that consumers use to assess vendor trustworthiness in the offline retail context, online consumers often rely on trust triggers embedded within e-Commerce websites to contribute to the establishment of sufficient trust to make an online purchase. This paper presents and discusses the results of a study which took an initial look at the extent to which the context or manner in which trust triggers are evaluated may exert influence on the importance attributed to individual triggers.

Cyberstalking:the technology of hate

This article discusses the emergence of cyberstalking as a means of victimising individuals and minority groups. However, rather than focusing on the activities of far-right groups, we discuss how technology can encourage individuals to harass others. The central argument made is that technology both enables and invites participation in criminal or antisocial behaviour from individuals who would not normally take part in such activities. One way in which this can be explained is by suggesting that some of the social and technological characteristics of the Internet act together in order to lower inhibitions and establish new norms. For instance, the anonymity offered by the Internet enables people to participate in activities such as encouraging violence against others with little fear of retaliation. In addition, by allowing a cyberstalker to harm another person at a distance, the victim is effectively depersonalised. In this way it can be argued that some of those who sympathise with the goals of far-right organisations may be reluctant to act in the offline world but more willing to act in the online world.

How does personality affect trust in B2C e-commerce?

Trust is a critical component of successful e-Commerce. Given the impersonality, anonymity, and automation of transactions, online vendor trustworthiness cannot be assessed by means of body language and other environmental cues that consumers typically use when deciding to trust offline retailers. It is therefore essential that the design of e-Commerce websites compensate by incorporating circumstantial cues in the form of appropriate trust triggers. This paper presents and discusses the results of a study which took an initial look at whether consumers with different personality types (a) are generally more trusting and (b) rely on different trust cues during their assessment of first impression vendor trustworthiness in B2C e-Commerce.

Center of shelf attention:understanding the role of visual attention on product choice

Two eye-tracking studies and an offline experiment explored the effect of central shelf location on attention and choice. Investigation of the attention process revealed that the central gaze cascade effect, progressively increasing attention focused on the central option predicted choice.

Quality Measurement of Business Web Application

With the development of the Internet culture applications are becoming simpler and simpler, users need less IT knowledge than earlier; from the ‘reader’ status they have reached that of the content creator and editor. In our days, the effects of the web are becoming stronger and stronger— computer-aided work is conventional almost everywhere. The spread of the Internet applications has several reasons: first of all, their accessibility is widespread; second, their use is not limited to only one computer or network on which they have been installed. Also, the quantity of accessible information now and earlier is not even comparable. Not counting the applications which need high broadband or high counting capacity (for example video editing), Internet applications are reaching the functionality of the thick clients associates. The most serious disadvantage of Internet applications – for security reasons — is that the resources of the client computer are not fully accessible or accessible only to a restricted extent. Still thick clients do have some advantages: better multimedia perdormance with more flexibility due to local resources and the possibility for offline working.

Mitigation of pattern sensitivity in full-field electronic dispersion compensation

We investigate the pattern-dependent decoding failures in full-field electronic dispersion compensation (EDC) by offline processing of experimental signals, and find that the performance of such an EDC receiver may be degraded by an isolated "1" bit surrounded by long strings of consecutive "0s". By reducing the probability of occurrence of this kind of isolated "1" and using a novel adaptive threshold decoding method, we greatly improve the compensation performance to achieve 10-Gb/s on-off keyed signal transmission over 496-km field-installed single-mode fiber without optical dispersion compensation.

Foveation time measure in Congenital Nystagmus through second order approximation of the slow phases

Congenital Nystagmus (CN) is an ocular-motor disorder characterised by involuntary, conjugated ocular oscillations, and its pathogenesis is still unknown. The pathology is de fined as "congenital" from the onset time of its arise which could be at birth or in the first months of life. Visual acuity in CN subjects is often diminished due to nystagmus continuous oscillations, mainly on the horizontal plane, which disturb image fixation on the retina. However, during short periods in which eye velocity slows down while the target image is placed onto the fovea (called foveation intervals) the image of a given target can still be stable, allowing a subject to reach a higher visual acuity. In CN subjects, visual acuity is usually assessed both using typical measurement techniques (e.g. Landolt C test) and with eye movement recording in different gaze positions. The offline study of eye movement recordings allows physicians to analyse nystagmus main features such as waveform shape, amplitude and frequency and to compute estimated visual acuity predictors. This analytical functions estimates the best corrected visual acuity using foveation time and foveation position variability, hence a reliable estimation of this two parameters is a fundamental factor in assessing visual acuity. This work aims to enhance the foveation time estimation in CN eye movement recording, computing a second order approximation of the slow phase components of nystag-mus oscillations. About 19 infraredoculographic eye-movement recordings from 10 CN subjects were acquired and the visual acuity assessed with an acuity predictor was compared to the one measured in primary position. Results suggest that visual acuity measurements based on foveation time estimation obtained from interpolated data are closer to value obtained during Landolt C tests. © 2010 IEEE.

Adaptive power and rate control for QoS guarantee of DSRC based collaborative road safety applications

In this paper we propose an adaptive power and message rate control method for safety applications at road intersections. The design objectives are to firstly provide guaranteed QoS support to both high priority emergency safety applications and low priority routine safety applications and secondly maximize channel utilization. We use an offline simulation based approach to find out the best possible configurations of transmit power and message rate for given numbers of vehicles in the network with certain safety QoS requirements. The identified configurations are then used online by roadside access points (AP) adaptively according to estimated number of vehicles. Simulation results show that this adaptive method could provide required QoS support to safety applications and it significantly outperforms a fixed control method. © 2013 International Information Institute.

Preparation of a poly(L-lactide-co-caprolactone) copolymer using a novel tin(II) alkoxide initiator and its fiber processing for potential use as an absorbable monofilament surgical suture

A poly(L-lactide-co-caprolactone) copolymer, P(LL-co-CL), of composition 75:25 mol% was synthesized via the bulk ring-opening copolymerization of L-lactide and ε-caprolactone using a novel bis[tin(II) monooctoate] diethylene glycol coordination-insertion initiator, OctSn-OCH2CH2OCH2CH2O-SnOct. The P(LL-co-CL) copolymer obtained was characterized by a combination of analytical techniques, namely nuclear magnetic resonance spectroscopy, gel permeation chromatography, dilute-solution viscometry, differential scanning calorimetry, and thermogravimetric analysis. For processing into a monofilament fiber, the copolymer was melt spun with minimal draw to give a largely amorphous and unoriented as-spun fiber. The fiber's oriented semicrystalline morphology, necessary to give the required balance of mechanical properties, was then developed via a sequence of controlled offline hot-drawing and annealing steps. Depending on the final draw ratio, the fibers obtained had tensile strengths in the region of 200–400 MPa.