Estudi i guia docent per a modelatge i simulació de sistemes mitjançant l'entron ARENA

Aquest projecte es basa en el modelatge i simulació de sistemes utilitzant un simulador digital, i pretén ser una guia docent com a eina d’ajuda per a una assignatura que, a priori, s’impartirà a la Universitat de Vic. La simulació és una tècnica que permet representar el comportament de processos (físics, productius, de serveis, etc.) sense necessitat d’accedir al sistema real. Per analitzar, estudiar i millorar el comportament d’un sistema mitjançant la tècnica de la simulació digital és necessari primer desenvolupar un model conceptual que descrigui les variables d’interès, i després implementar-lo en un simulador per poder analitzar els resultats. ARENA és el software de simulació que s’estudia en aquest projecte i es presenta com una eina que permet la descripció complerta de l’experiència que una entitat desenvolupa a l’interior del sistema mentre flueix a través d’aquest. En concret s’utilitza la versió ARENA 10.0. Pel que fa a l’estructura del projecte, primerament s’introdueixen conceptes teòrics referents a la simulació, així com avantatges i inconvenients i els camps d’aplicació de la simulació. Seguidament i ja centrats en l’Arena, s’analitza un exemple senzill per començar-ne a veure el funcionament. Posteriorment, es van estudiant varis exemples amb complexitat progressiva. Aquests exemples es desenvolupen pas a pas de manera que es puguin anar provant amb el simulador. En el transcurs del projecte es van estudiant les eines de l’Arena i les seves possibilitats, així com els resultats obtinguts i les interpretacions d’aquests. Aquest projecte pretén, doncs, donar conceptes introductoris en el camp de la simulació en general, i, en particular, descriure eines bàsiques sobre el funcionament de l’Arena.

Parametrització de contorns oberts

Un dels principals problemes quan es realitza un anàlisi de contorns és la gran quantitat de dades implicades en la descripció de la figura. Per resoldre aquesta problemàtica, s’aplica la parametrització que consisteix en obtenir d’un contorn unes dades representatives amb els mínims coeficients possibles, a partir dels quals es podrà reconstruir de nou sense pèrdues molt evidents d’informació. En figures de contorns tancats, la parametrització més estudiada és l’aplicació de la transformada discreta de Fourier (DFT). Aquesta s’aplica a la seqüència de valors que descriu el comportament de les coordenades x i y al llarg de tots els punts que formen el traç. A diferència, en els contorns oberts no es pot aplicar directament la DFT ja que per fer-ho es necessita que el valor de x i de y siguin iguals tan en el primer punt del contorn com en l’últim. Això és degut al fet que la DFT representa sense error senyals periòdics. Si els senyals no acaben en el mateix punt, representa que hi ha una discontinuïtat i apareixen oscil·lacions a la reconstrucció. L’objectiu d’aquest treball és parametritzar contorns oberts amb la mateixa eficiència que s’obté en la parametrització de contorns tancats. Per dur-ho a terme, s’ha dissenyat un programa que permet aplicar la DFT en contorns oberts mitjançant la modificació de les seqüencies de x i y. A més a més, també utilitzant el programari Matlab s’han desenvolupat altres aplicacions que han permès veure diferents aspectes sobre la parametrització i com es comporten els Descriptors El·líptics de Fourier (EFD). Els resultats obtinguts han demostrat que l’aplicació dissenyada permet la parametrització de contorns oberts amb compressions òptimes, fet que facilitarà l’anàlisi quantitatiu de formes en camps com l’ecologia, medicina, geografia, entre d’altres.

Efecto de los usos del suelo en la emisión de dióxido de carbono del suelo a la atmósfera en un agroecosistema semiárido del Valle del Ebro

Los cambios en los usos del suelo han contribuido de manera importante al incremento de gases de efecto invernadero en la atmósfera, especialmente de dióxido de carbono, aumentando sus emisiones desde 1970 en un 80%. Estos cambios causan la alteración de los suelos provocando un impacto sobre el ciclo del carbono, aumentando las tasas de descomposición de la fracción orgánica creando así un flujo de CO2 a la atmosfera. Entre las recomendaciones del Panel Intergubernamental de expertos sobre el Cambio Climático (IPCC, en inglés), y contemplado en el Protocolo de Kyoto, se encuentra el proceso de secuestro de carbono en suelos, que implica la eliminación del CO2 atmosférico por parte de las plantas y su almacenamiento como materia orgánica del suelo. Para poder favorecer dicho proceso, en un determinado tipo de ecosistema, es fundamental conocer cuáles son los factores que gobiernan la respiración del suelo y el impacto que tienen los diferentes usos en la emisión de CO2. En el presente trabajo se han estudiado 4 usos del suelo representativos del secano aragonés: un monocultivo de cebada en siembra directa (NT), un suelo abandonado labrado (AC), un suelo abandonado no alterado (AU) y un suelo forestal (FR) con el objetivo de conocer sus tasas de respiración, la influencia de diferentes parámetros edáficos en ellas, y proponer cambios en el uso del suelo que ayuden a mitigar estas emisiones. Además, se ha dedicado un apartado para conocer cómo influyen diferentes técnicas de fertilización nitrogenada (mineral y orgánica) en la respiración de un monocultivo de cebada en siembra directa. En cuanto a los usos, los resultados obtenidos tanto in situ como en laboratorio muestran una mayor respiración en AC, siendo los valores más bajos los de NT y FR. Una de las principales conclusiones es que la supresión del laboreo y del periodo de barbecho largo, así como la conversión de tierras abandonadas y marginales a cultivos y zonas forestales se presentan en este tipo de ecosistemas como prácticas de secuestro de carbono. En el estudio de aplicación de fertilizantes, no se observó ningún cambio en la respiración del suelo después de la aplicación de nitrógeno mineral. En cambio, el suelo fertilizado con purín sí que mostró picos de emisión durante las siguientes horas a la incorporación de éste, debido fundamentalmente a su alto contenido de carbono lábil.

Estudi sobre el perfil de persones grans amb dependència del servei d'ajuda a domicili del Consell Comarcal d'Osona i el tipus de suport formal i informal

The aim of this study is to determine the profile of dependent elderly people users of the home care services (SAD) of the regional council in Osona (Consell Comarcal d´Osona) , and the characteristics of formal and informal types of support they use. Methodology. An observational study of a transversal format has been carried out, with retrospective and descriptive purposes. The target population is 63 people (26 men and 37 women) included in the program of the regional SAD They have a recognized dependence grade approved by the law 39 /2006, December 14th , promoting the individual autonomy and care of elderly people in a dependent situation. The data were collected by social workers of basic social services, first with a home visit and followed by handed out questionnaires, specifically designed for this study, in order to obtain information on socio-demographic characteristics, and the type of support formal and informal. The obtained results on the SAD users are women in a 58.7% and a 41.3 % are men. The 84% of the total sampling are 80 years old and more, being the average age of 85.2 years old. 45% of them are married, 41% are widows and widowers and 14% are single. 54% are rated with severe dependence (grade II), 42.8% with high dependence (grade III). 86% live accompanied. 100% have an informal caregiver and a 95% of the times, the caregiver is a relative who in 73% of the cases the dedication time is permanent. The coverage of the SAD has an average of 4.27 hours per week and per user. The formal services most used are the technical (62%), also the assessment of an occupational therapist at home (57%) and the telecare service in a (56%). Conclusions. The SAD is used primarily for women in an advanced age and severe dependence. The informal assistance structures have an informal caregiver, being a member of the family mostly, living with the dependent, and mainly in a permanent dedication basis. The SAD has a varied intensity in each case. The formal support services complementary to the SAD, are largely used in all cases.

Treatment of oily wastewater by ultrafiltration: The effect of different operating and solution conditions

In many industries, such as petroleum production, and the petrochemical, metal, food and cosmetics industries, wastewaters containing an emulsion of oil in water are often produced. The emulsions consist of water (up to 90%), oils (mineral, animal, vegetable and synthetic), surfactants and other contaminates. In view of its toxic nature and its deleterious effects on the surrounding environment (soil, water) such wastewater needs to be treated before release into natural water ways. Membrane-based processes have successfully been applied in industrial applications and are considered as possible candidates for the treatment of oily wastewaters. Easy operation, lower cost, and in some cases, the ability to reduce contaminants below existing pollution limits are the main advantages of these systems. The main drawback of membranes is flux decline due tofouling and concentration polarisation. The complexity of oil-containing systems demands complementary studies on issues related to the mitigation of fouling and concentration polarisation in membranebased ultrafiltration. In this thesis the effect of different operating conditions (factors) on ultrafiltration of oily water is studied. Important factors are normally correlated and, therefore, their effect should be studied simultaneously. This work uses a novel approach to study different operating conditions, like pressure, flow velocity, and temperature, and solution properties, like oil concentration (cutting oil, diesel, kerosene), pH, and salt concentration (CaCl2 and NaCl)) in the ultrafiltration of oily water, simultaneously and in a systematic way using an experimental design approach. A hypothesis is developed to describe the interaction between the oil drops, salt and the membrane surface. The optimum conditions for ultrafiltration and the contribution of each factor in the ultrafiltration of oily water are evaluated. It is found that the effect on permeate flux of the various factors studied strongly depended on the type of oil, the type of membrane and the amount of salts. The thesis demonstrates that a system containing oil is very complex, and that fouling and flux decline can be observed even at very low pressures. This means that only the weak form of the critical flux exists for such systems. The cleaning of the fouled membranes and the influence of different parameters (flow velocity, temperature, time, pressure, and chemical concentration (SDS, NaOH)) were evaluated in this study. It was observed that fouling, and consequently cleaning, behaved differently for the studied membranes. Of the membranes studied, the membrane with the lowest propensity for fouling and the most easily cleaned was the regenerated cellulose membrane (C100H). In order to get more information about the interaction between the membrane and the components of the emulsion, a streaming potential study was performed on the membrane. The experiments were carried out at different pH and oil concentration. It was seen that oily water changed the surface charge of the membrane significantly. The surface charge and the streaming potential during different stages of filtration were measured and analysed being a new method for fouling of oil in this thesis. The surface charge varied in different stages of filtration. It was found that the surface charge of a cleaned membrane was not the same as initially; however, the permeability was equal to that of a virgin membrane. The effect of filtration mode was studied by performing the filtration in both cross-flow and deadend mode. The effect of salt on performance was considered in both studies. It was found that salt decreased the permeate flux even at low concentration. To test the effect of hydrophilicity change, the commercial membranes used in this thesis were modified by grafting (PNIPAAm) on their surfaces. A new technique (corona treatment) was used for this modification. The effect of modification on permeate flux and retention was evaluated. The modified membranes changed their pore size around 33oC resulting in different retention and permeability. The obtained results in this thesis can be applied to optimise the operation of a membrane plant under normal or shock conditions or to modify the process such that it becomes more efficient or effective.

Determinação condutométrica de cloridrato de metformina em formulações farmacêuticas empregando nitrato de prata como titulante

A simple, precise, rapid and low-cost conductometric titration method for the determination of metformin hydrochloride (MET) in pharmaceuticals using silver nitrate as titrant is proposed. The method was based on the chemical reaction between the chloride of metformin hydrochloride molecule and Ag(I) ions, yielding the precipitate AgCl(s). The method was applied for MET determination in three pharmaceuticals and the obtained results with proposed method were in close agreement with those results obtained using an official method of the British Pharmacopoeia, at a 95% confidence level.

Estudo da sorção do corante catiônico violeta cristal por espuma de poliuretano em meio aquoso contendo dodecilsulfato de sódio

This work presents a detailed study about the sorption of crystal violet (CV) cationic dye onto polyether type polyurethane foam (PUF). The sorption process was based on the formation of an ionic-pair between cationic dye and dodecylsulfate anion (SDS), which presented high affinity by PUF. Set-up employed in the study was built up by adjusting a 200 mg cylinder of PUF to the arm of an overhead stirrer. The system was characterized in relation to equilibrium and kinetic aspects and it was modeled by employing Langmuir and Freundlich isotherms. Obtained results showed that the ratio between SDS and MB concentrations played an important role on the sorption process. According to results found it was possible to retain up to 3.4 mg of dye from 200 mL of a 5.0 x 10-5 mol L-1 CV solution containing 1.25 x 10-4 mol L-1 SDS, which represented a removal efficiency of around 92%.

O valor energético dos alimentos: exemplo de uma determinação experimental, usando calorimetria de combustão

The energies involved in the combustion, under atmosphere of oxygen, of breakfast cereals and dehydrate powdered whole milk samples, were determined by combustion calorimetry. This practical work, in the field of human nutrition, involved the characterization of the nutritional composition and the combustion of samples of the two foods that are part of the alimentary diet, namely, at breakfast. The obtained results allowed to assess the energy value printed in the foods labels and discuss the way those values are estimated.

Spectroscopic characterization of schiff base-copper complexes immobilized in smectite clays

Herein, the immobilization of some Schiff base-copper(II) complexes in smectite clays is described as a strategy for the heterogenization of homogeneous catalysts. The obtained materials were characterized by spectroscopic techniques, mostly UV/Vis, EPR, XANES and luminescence spectroscopy. SWy-2 and synthetic Laponite clays were used for the immobilization of two different complexes that have previously shown catalytic activity in the dismutation of superoxide radicals, and disproportionation of hydrogen peroxide. The obtained results indicated the occurrence of an intriguing intramolecular redox process involving copper and the imine ligand at the surface of the clays. These studies are supported by computational calculations.

Metodologias para reutilização do resíduo de terra diatomácea, proveniente da filtração e clarificação da cerveja

The earth diatomite is a material used by the industries in the filtration process and clarification of the beer. This material presents a reduced useful life due to the blockages of their pores during the filtration process. The objective of this work was to reactivate the properties of filtration of the earth diatomite, saturated with organic matter during the filtration stage, starting from a controlled thermal treatment. The obtained results demonstrated that the earth diatomite saturated with organic matter submitted to a controlled thermal treatment has their filtration properties reactivated, could be reused in the beer production process.

Kinetics of oxidation of biodiesel from soybean oil mixed with TBHQ: determination of storage time

Synthetic antioxidants are an alternative to prevent or retard the degradation of biofuels made from vegetable oils. In this study, it was evaluated the oxidative stability of B100 soybean oil biodiesel, in the presence of tercbutylhydroquinone (TBHQ). The results showed that the induction period, that precedes the seeding process, was delayed in the presence of the antioxidant. Moreover, the obtained results suggest that the B100 biodiesel containing TBHQ can present a storage time at 25 ºC, three times longer than the estimated time for the pure B100.

In vitro trypanocidal evaluation of pinane derivatives from essential oils of ripe fruits from Schinus terebinthifolius Raddi (Anacardiaceae)

Essential oils of ripe fruits from Schinus terebinthifolius (Anacardiaceae), obtained using a pilot extractor and a Clevenger apparatus were chemically characterized. Due the high amount of (-)- α-pinene in both oils, this monoterpene was tested against the protozoan parasite Trypanosoma cruzi, showing a moderate potential (IC50 63.56 µg/mL) when compared to benznidazole (IC50 43.14 µg/mL). Otherwise, (-)- α-pinene oxide did not showed anti-trypanosomal activity (IC50 > 400 µg/mL) while (-)-pinane showed an IC50 of 56.50 µg/mL. The obtained results indicated that the epoxydation of α-pinene results to the loss of the anti-parasitic activity while its hydrogenation product, contributed slightly to the increased activity.

AVALIAÇÃO DE MÉTODOS DE SOLUBILIZAÇÃO PARA DETERMINAÇÃO DE METAIS EM GLICERINA PROVENIENTE DA PRODUÇÃO DE BIODIESEL POR TÉCNICAS DE ESPECTROMETRIA ATÔMICA

This paper describes the evaluation of simple and fast solubilization methods for the determination of Ca, Mg, and K in glycerin samples from biodiesel production by atomic spectrometry. The solubilization in water was compared with two other methods: solubilization in formic acid and solubilization in ethanol. Using solubilization in water, determination of the three analytes was possible; the values of limits of detection for Ca, K, Mg were 0.31, 0.06, and 0.16 mg kg−1, respectively. Because no adequate reference material was available, the accuracy was evaluated by assessing the recoveries tests with both solubilization methods; the evaluation ranged from 90% to 115%, with values of relative standard deviation >8%, indicating good accuracy of the measure. Four crude glycerin samples obtained from biodiesel plants of Rio Grande do Sul were analyzed after treatment with the different methods of solubilization, and the obtained results of Ca, Mg, and K concentration were in agreement with the values obtained from both solubilization methods. Therefore, solubilization in water is concluded to be a simpler, faster, and viable method for sample preparation of glycerin.

THOMÉ RODRIGUES SOBRAL (1759-1829) E A VIRTUDE FEBRÍFUGA DE UM GRANDE NÚMERO DE QUINAS

AbstractIn the beginning of the 19th century, Portugal received from Brazil several barks that were used as cure for fevers for the purpose of chemical analysis. These analyses were intended to determine the principle compositional components responsible for the febrifuge power of these barks. At the University of Coimbra, the samples were analyzed under the supervision of Thomé Rodrigues Sobral, the Director of the university's Chemical Laboratory. In the interpretation of the obtained results, Sobral put forward his own ideas about the febrifuge principles of the analyzed barks in relation to their chemical composition. Here, we refer to both Rodrigues Sobral's reported results and his ideas about the febrifuge principle.

COMPARAÇÃO DE PROCESSAMENTOS MATEMÁTICOS DE DADOS VOLTAMÉTRICOS: APLICAÇÃO NA DETERMINAÇÃO SIMULTÂNEA DE FLUOROQUINOLONAS

This paper describes a comparative study between the procedures of deconvolution and the second-order derivative of square wave voltammograms to achieve separation of the voltammetric peaks of levofloxacin (LEVO) and norfloxacin (NOR), for their simultaneous quantification in urine samples. The obtained results indicate that the use of second-derivative voltammograms coupled with carbon screen-printed electrodes is the most efficient approach for completely separating the voltammetric peaks of LEVO and NOR. In addition, this approach has produced detection limits lower than 1.0 µmol L-1 and a wide linear range for both drugs. The proposed method was successfully used to simultaneously determine LEVO and NOR in spiked human and bovine urine samples with recovery percentages close to 100% for all analyzed samples.