Sistema de divulgação dos serviços e produtos da Porto Santo Line na plataforma Android

A Porto Santo Line é a empresa responsável pela ligação marítima entre as ilhas Madeira e Porto Santo, oferecendo, para além do transporte, um conjunto de serviços e produtos que estão associado à sua actividade principal. A sua base de clientes inclui não só os residentes de ambas as ilhas, mas também muitos dos turistas que visitam o arquipélago. O posicionamento desta empresa no mercado é feito das formas tradicionais, onde se inclui uma rede de balcões e um site através do qual os clientes podem aceder aos produtos e serviços que constitui a oferta da Porto Santo Line. Num esforço de reforçar a sua presença no mercado e de intensificar a sua aposta na inovação, a empresa tem procurado encontrar novas formas e novos canais para chegar aos seus clientes. Este projecto visa dotar a Porto Santo Line de uma aplicação que estenda a sua presença no mercado, oferecendo aos seus clientes a possibilidade de aceder aos seus produtos e serviços através de equipamentos móveis. Este relatório documenta a realização deste projecto, dando principal enfase ao processo adoptado, assim como ao desenho do sistema e sua avaliação. Procurou-se igualmente evidenciar ao longo do relatório, as considerações mais relevantes na elaboração de um projecto com estas características.

Desenvolvimento de sistemas de aditivos químicos para aplicação em cimentações de poços de petróleo

The primary cementing is an important step in the oilwell drilling process, ensuring the mechanical stability of the well and the hydraulic isolation between casing and formation. For slurries to meet the requirements for application in a certain well, some care in the project should be taken into account to obtain a cement paste with the proper composition. In most cases, it is necessary to add chemicals to the cement to modify its properties, according to the operation conditions and thus obtain slurries that can move inside the jacket providing a good displacement to the interest area. New technologies of preparation and use of chemicals and modernization of technological standards in the construction industry have resulted in the development of new chemical additives for optimizing the properties of building materials. Products such as polycarboxylate superplasticizers provide improved fluidity and cohesion of the cement grains, in addition to improving the dispersion with respect to slurries without additives. This study aimed at adapting chemical additives used in civil construction to be used use in oilwell cement slurries systems, using Portland cement CPP-Special Class as the hydraulic binder. The chemical additives classified as defoamer, dispersant, fluid loss controller and retarder were characterized by infrared absorption spectroscopy, thermogravimetric analyses and technological tests set by the API (American Petroleum Institute). These additives showed satisfactory results for its application in cement slurries systems for oil wells. The silicone-based defoamer promoted the reduction of air bubbles incorporated during the stirring of the slurries. The dispersant significantly reduced the rheological parameters of the systems studied. The tests performed with the fluid loss controller and the retarder also resulted in suitable properties for application as chemical additives in cement slurries

Desenvolvimento de equipamento motorizado para aplicação líquida de produtos fitossanitários na cultura do café

O trabalho teve como objetivo desenvolver um protótipo aplicador de líquidos na superfície do solo para cafezais localizados em regiões de topografia acidentada ou cultivados em sistema de plantio adensado. O protótipo do aplicador construído é um trator de rabiças acionado por um motor de dois tempos a gasolina, de 2,61 kW (3,5 cv), com duas rodas motrizes com bitola de 0,60 m e uma terceira roda direcional, equipado com sistema de pulverização dotado de depósito de 40 L, bomba centrífuga, filtros de linha, regulador de pressão, manômetro, mangueiras, válvulas e suporte de bicos. Para avaliar a eficiência do protótipo, foram instalados dois experimentos de campo em São Sebastião do Paraíso - MG (2003 e 2004), onde foram aplicados inseticidas sistêmicos para o controle da cigarra. Os métodos de aplicação avaliados foram: aplicação em faixa, filete, drench contínuo e drench intermitente. O protótipo aplicador de líquidos à superfície do solo atendeu aos objetivos propostos, visto que conseguiu realizar o controle químico de cigarras com destaque para a aplicação em drench contínuo. O protótipo, se equipado para aplicar simultaneamente nos dois lados da planta, apresentará capacidade de campo operacional semelhante à do equipamento tratorizado.

Avaliação de doses e produtos corretores da acidez em variáveis biométricas na produção de mudas de maracujazeiro

A utilização de produtos corretores da acidez do solo e a crescente busca por novos insumos agrícolas são de suma importância para uma agricultura sustentável e ecologicamente viável. O presente trabalho foi conduzido no viveiro de mudas do Setor de Fruticultura da Universidade Federal de Lavras (UFLA), Lavras, Estado de Minas Gerais. O delineamento experimental utilizado foi blocos casualizados em esquema fatorial 3 x 4, sendo três produtos, quatro doses e três repetições, as doses foram calculadas de modo que se atingisse a saturação estabelecida, de acordo com a concentração de cada produto. As doses foram: zero, metade, completa e o dobro da dose recomendada. A incubação foi realizada para o silício e calcário, e o Lithothamnium, pela liberação rápida, foi apenas incorporado ao solo. As características avaliadas foram: crescimento da parte aérea (mm), tamanho do sistema radicular (mm), número de folhas, matéria seca da parte aérea (mg), matéria seca da raiz (mg) e matéria seca total (mg). Os três produtos em questão proporcionaram mudas de qualidade, sendo a dose de 1,4 vezes a recomendada, a melhor para formação de mudas de maracujazeiro.

Desenvolvimento de um modelo de gestão do conhecimento para a melhoria do processo de desenvolvimento de produtos

The knowledge management has received major attention from product designers because many of the activities within this process have to be creative and, therefore, they depend basically on the knowledge of the people who are involved in the process. Moreover, Product Development Process (PDP) is one of the activities in which knowledge management manifests in the most critical form once it had the intense application of the knowledge. As a consequence, this thesis analyzes the knowledge management aiming to improve the PDP and it also proposes a theoretical model of knowledge management. This model uses five steps (creation, maintenance, dissemination, utilization and discard) through the verification of the occurrence of four types of knowledge conversion (socialization, externalization, combination and internalization) that it will improve the knowledge management in this process. The intellectual capital in Small and Medium Enterprises (SMEs) managed efficiently and with the participation of all employees has become the mechanism of the creation and transference processes of knowledge, supporting and, consequently, improving the PDP. The expected results are an effective and efficient application of the proposed model for the creation of the knowledge base within an organization (organizational memory) aiming a better performance of the PDP. In this way, it was carried out an extensive analysis of the knowledge management (instrument of qualitative and subjective evaluation) within the Design department of a Brazilian company (SEBRAE/RN). This analysis aimed to know the state-of-the-art of the Design department regarding the use of knowledge management. This step was important in order to evaluate in the level of the evolution of the department related to the practical use of knowledge management before implementing the proposed theoretical model and its methodology. At the end of this work, based on the results of the diagnosis, a knowledge management system is suggested to facilitate the knowledge sharing within the organization, in order words, the Design department

Avaliação da interação universidade - empresas - governo no desenvolvimento de projetos inovadores no RN por micro e pequenas empresas

Knowledge and innovation were seen as major forces, both for survival, as the acquisition of competitive advantages in the Brazilian economy, as well as adding value to the product as a market differentiator. The Triple Helix model is directed toward the knowledge-based economy. Over the past six years, the Federal Government through the Financier of Studies and Projects ( FINEP ) invested in technological innovation projects, economic subsidies, about U.S. $ 1 billion supporting more than 800 projects with these resources. According to the MCTI , the Northeast, over the years 2000 to 2010 increased spending on Science and Technology (considering the activities of research and development more scientific and related activities) of the State Government in relation to its total revenue In 2000, 0.51% of total revenues were invested in Science & Technology, while in 2010 this figure increased to 1.31%. Among the nine Northeast states, Paraíba is highlighted. In 2000, 0.33% of its total revenues were directed to innovation, reaching 2.04% in 2010, the largest increase in the region while the RN invested 0.24% in 2000 and in 2010 reached the level of 1.42 %. According to IBGE, in the period 2000-2011, the micro and small enterprises surpassed the barrier of 6 million establishments. In 2000, there were 4.2 million establishments while in 2011 were 6.3 million active establishments. Therefore, throughout the period, there was a creation of approximately 2.1 million new establishments. Between 2000 and 2011, micro and small businesses have created 7.0 million formal jobs, 8.6 million jobs in 2000 to 15.6 million in 2011. This scenario shows the importance of this study in relation to the investment of governments in RD & I in micro and small enterprises. This study aims to analyze the interaction Universities - Business - Government in the development of innovation in micro and small companies in Rio Grande do Norte participants of the edicts of Inova FAPERN. We chose to adopt as a research method case study concerning the procedure of the research, exploratory, descriptive, and on documents with engineers and researchers of innovation projects approved by PAPPE Subsidy (Inova -RN I, II and III). Data collection was done through the report made by FAPERN entitled: " Evaluation of companies financed and supported by the Grant Program for Technological Innovation for Micro and Small Enterprises RN - INOVA -RN " (2010) and a questionnaire with 40 closed questions and 1 opened to 30 affirmative composed based on a 5-point Likert scale. The analysis of data was qualitative and quantitative. The study provided to identify the importance and barriers arising from the relation between Government Enterprise (micro and small) and University as essential to the economic development of the region. It was also identified that, in the innovation projects, 70% of the goods or services originating from research were to market these, 50% resulted in a patent for the company and 80% publications of scientific articles

Desenvolvimento de métodos construtivos e de novos materiais empregados na confecção de cartuchos de próteses de membros inferiores

The manufacture of prostheses for lower limb amputees (transfemural and transtibial) requires the preparation of a cartridge with appropriate and custom fit to the profile of each patient. The traditional process to the patients, mainly in public hospitals in Brazil, begins with the completion of a form where types of equipment, plugins, measures, levels of amputation etc. are identified. Currently, such work is carried out manually using a common metric tape and caliper of wood to take the measures of the stump, featuring a very rudimentary, and with a high degree of uncertainty geometry of the final product. To address this problem, it was necessary to act in two simultaneously and correlated directions. Originally, it was developed an integrated tool for viewing 3D CAD for transfemoral types of prostheses and transtibial called OrtoCAD I. At the same time, it was necessary to design and build a reader Mechanical equipment (sort of three-dimensional scanner simplified) able to obtain, automatically and with accuracy, the geometric information of either of the stump or the healthy leg. The methodology includes the application of concepts of reverse engineering to computationally generate the representation of the stump and/or the reverse image of the healthy member. The materials used in the manufacturing of prostheses nor always obey to a technical scientific criteria, because, if by one way it meets the criteria of resistance, by the other, it brings serious problems mainly due to excess of weight. This causes to the user various disorders due to lack of conformity. That problem was addressed with the creation of a hybrid composite material for the manufacture of cartridges of prostheses. Using the Reader Fitter and OrtoCAD, the new composite material, which aggregates the mechanical properties of strength and rigidity on important parameters such as low weight and low cost, it can be defined in its better way. Besides, it brings a reduction of up steps in the current processes of manufacturing or even the feasibility of using new processes, in the industries, in order to obtain the prostheses. In this sense, the hybridization of the composite with the combination of natural and synthetic fibers can be a viable solution to the challenges offered above

Obtenção de sistemas microemulsionados e estudo de simulação por dinâmica molecular de sistemas micelares objetivando a veiculação de produtos naturais bioativos

Among the new drugs launched into the market since 1980, up to 30% of them belong to the class of natural products or they have semisynthetic origin. Between 40-70% of the new chemical entities (or lead compounds) possess poor water solubility, which may impair their commercial use. An alternative for administration of poorly water-soluble drugs is their vehiculation into drug delivery systems like micelles, microemulsions, nanoparticles, liposomes, and cyclodextrin systems. In this work, microemulsion-based drug delivery systems were obtained using pharmaceutically acceptable components: a mixture Tween 80 and Span 20 in ratio 3:1 as surfactant, isopropyl mirystate or oleic acid as oil, bidistilled water, and ethanol, in some formulations, as cosurfactants. Self-Microemulsifying Drug Delivery Systems (SMEDDS) were also obtained using propylene glycol or sorbitol as cosurfactant. All formulations were characterized for rheological behavior, droplet size and electrical conductivity. The bioactive natural product trans-dehydrocrotonin, as well some extracts and fractions from Croton cajucara Benth (Euphorbiaceae), Anacardium occidentale L. (Anacardiaceae) e Phyllanthus amarus Schum. & Thonn. (Euphorbiaceae) specimens, were satisfactorily solubilized into microemulsions formulations. Meanwhile, two other natural products from Croton cajucara, trans-crotonin and acetyl aleuritolic acid, showed poor solubility in these formulations. The evaluation of the antioxidant capacity, by DPPH method, of plant extracts loaded into microemulsions evidenced the antioxidant activity of Phyllanthus amarus and Anacardium occidentale extracts. For Phyllanthus amarus extract, the use of microemulsions duplicated its antioxidant efficiency. A hydroalcoholic extract from Croton cajucara incorporated into a SMEDDS formulation showed bacteriostatic activity against colonies of Bacillus cereus and Escherichia coli bacteria. Additionally, Molecular Dynamics simulations were performed using micellar systems, for drug delivery systems, containing sugar-based surfactants, N-dodecylamino-1-deoxylactitol and N-dodecyl-D-lactosylamine. The computational simulations indicated that micellization process for N-dodecylamino-1- deoxylactitol is more favorable than N-dodecyl-D-lactosylamine system.

Um método para desenvolvimento de abordagens generativas com composição de linguagens específicas de domínio

The software systems development with domain-specific languages has become increasingly common. Domain-specific languages (DSLs) provide increased of the domain expressiveness, raising the abstraction level by facilitating the generation of models or low-level source code, thus increasing the productivity of systems development. Consequently, methods for the development of software product lines and software system families have also proposed the adoption of domain-specific languages. Recent studies have investigated the limitations of feature model expressiveness and proposing the use of DSLs as a complement or substitute for feature model. However, in complex projects, a single DSL is often insufficient to represent the different views and perspectives of development, being necessary to work with multiple DSLs. In order to address new challenges in this context, such as the management of consistency between DSLs, and the need to methods and tools that support the development with multiple DSLs, over the past years, several approaches have been proposed for the development of generative approaches. However, none of them considers matters relating to the composition of DSLs. Thus, with the aim to address this problem, the main objectives of this dissertation are: (i) to investigate the adoption of the integrated use of feature models and DSLs during the domain and application engineering of the development of generative approaches; (ii) to propose a method for the development of generative approaches with composition DSLs; and (iii) to investigate and evaluate the usage of modern technology based on models driven engineering to implement strategies of integration between feature models and composition of DSLs