IntelliChair: a non-intrusive sitting posture and sitting activity recognition system

Current Ambient Intelligence and Intelligent Environment research focuses on the interpretation of a subject’s behaviour at the activity level by logging the Activity of Daily Living (ADL) such as eating, cooking, etc. In general, the sensors employed (e.g. PIR sensors, contact sensors) provide low resolution information. Meanwhile, the expansion of ubiquitous computing allows researchers to gather additional information from different types of sensor which is possible to improve activity analysis. Based on the previous research about sitting posture detection, this research attempts to further analyses human sitting activity. The aim of this research is to use non-intrusive low cost pressure sensor embedded chair system to recognize a subject’s activity by using their detected postures. There are three steps for this research, the first step is to find a hardware solution for low cost sitting posture detection, second step is to find a suitable strategy of sitting posture detection and the last step is to correlate the time-ordered sitting posture sequences with sitting activity. The author initiated a prototype type of sensing system called IntelliChair for sitting posture detection. Two experiments are proceeded in order to determine the hardware architecture of IntelliChair system. The prototype looks at the sensor selection and integration of various sensor and indicates the best for a low cost, non-intrusive system. Subsequently, this research implements signal process theory to explore the frequency feature of sitting posture, for the purpose of determining a suitable sampling rate for IntelliChair system. For second and third step, ten subjects are recruited for the sitting posture data and sitting activity data collection. The former dataset is collected byasking subjects to perform certain pre-defined sitting postures on IntelliChair and it is used for posture recognition experiment. The latter dataset is collected by asking the subjects to perform their normal sitting activity routine on IntelliChair for four hours, and the dataset is used for activity modelling and recognition experiment. For the posture recognition experiment, two Support Vector Machine (SVM) based classifiers are trained (one for spine postures and the other one for leg postures), and their performance evaluated. Hidden Markov Model is utilized for sitting activity modelling and recognition in order to establish the selected sitting activities from sitting posture sequences.2. After experimenting with possible sensors, Force Sensing Resistor (FSR) is selected as the pressure sensing unit for IntelliChair. Eight FSRs are mounted on the seat and back of a chair to gather haptic (i.e., touch-based) posture information. Furthermore, the research explores the possibility of using alternative non-intrusive sensing technology (i.e. vision based Kinect Sensor from Microsoft) and find out the Kinect sensor is not reliable for sitting posture detection due to the joint drifting problem. A suitable sampling rate for IntelliChair is determined according to the experiment result which is 6 Hz. The posture classification performance shows that the SVM based classifier is robust to “familiar” subject data (accuracy is 99.8% with spine postures and 99.9% with leg postures). When dealing with “unfamiliar” subject data, the accuracy is 80.7% for spine posture classification and 42.3% for leg posture classification. The result of activity recognition achieves 41.27% accuracy among four selected activities (i.e. relax, play game, working with PC and watching video). The result of this thesis shows that different individual body characteristics and sitting habits influence both sitting posture and sitting activity recognition. In this case, it suggests that IntelliChair is suitable for individual usage but a training stage is required.

Outer crust of a cold non-accreting magnetar

The outer-crust structure and composition of a cold, non-accreting magnetar are studied. We model the outer crust to be made of fully equilibrated matter where ionized nuclei form a Coulomb crystal embedded in an electron gas. The main effects of the strong magnetic field are those of quantizing the electron motion in Landau levels and of modifying the nuclear single-particle levels producing, on average, an increased binding of nucleons in nuclei present in the Coulomb lattice. The effect of a homogeneous and constant magnetic field on nuclear masses has been predicted by using a covariant density functional in which induced currents and axial deformation due to the presence of a magnetic field that breaks time-reversal symmetry have been included self-consistently in the nucleon and meson equations of motion. Although not yet observed, for Ba 1016 G both effects contribute to produce different compositions - odd-mass nuclei are frequently predicted - and to increase the neutron-drip pressure as compared to a typical neutron star. Specifically, in such a regime, the magnetic-field effects on nuclei favor the appearance of heavier nuclei at low pressures. As B increases, such heavier nuclei are also preferred up to larger pressures. For the most extreme magnetic field considered, B=1018 G, and for the models studied, almost the whole outer crust is made of 4092Zr52.

Problem solving competency and the mathematical kangaroo

The goal of the study was to investigate differences in how two groups of students activated mathematical competencies in the mathematical kangaroo (MK). The two groups, group 1 and 2, were identified from a sample of 264 students (grade 7, age 13) through high achievement (top 20 %) in only one of the tests: the MK or a curriculum bounded test (CT). Analysis of mathematical competencies showed that the high achievers in the MK, activated the problem solving competency to a greater extent than the high achievers in the CT, when doing the MK. The results indicate the importance of using non-traditional tests in the assessment process of students to be able to find students that might possess good mathematical competencies although they do not show it on curriculum bounded tests.

Surgical results and survival of older patients with unsuspected N2 (stage IIIA) non-small cell lung cancer

Purposes. The optimal treatment of N2 non-small cell lung cancer (NSCLC) in older patients is still debate and represent an important treatment and ethical problem. Patients and methods. Between January 2000 to December 2010, 273 older patients underwent lung resection for (NSCLC). Results. The overall-operative mortality was 9.5%. Risk factors for in-hospital mortality were pneumonectomy and poli-vasculopathy. One, 3 and 5-year survival were 73%, 23% and 16% respectively. Conclusions. In potentially operable older patients with NSCLC we need to make every effort to exclude N2 involvement because very poor long-term survival. Pneumonectomy in older patients gains prohibitive in-hospital mortality.

Oceans of energy? The non-linear trajectory of the emerging wave energy technology

This paper addresses the construction and structuring of a technological niche – i.e. a protected space where promising but still underperforming technologies are stabilized and articulated with societal needs – and discusses the processes that influence niche development and may enable niche breakout. In theoretical terms the paper is grounded on the multi-level approach to sustainability transitions, and particularly on the niche literature. But it also attempts to address the limitations of this literature in what concerns the spatial dimension of niche development. It is argued that technological niches can transcend the narrow territorial boundaries to which they are often confined, and encompass communities and actions that span several spatial levels, without losing some territorial embeddedness. It is further proposed that these features shape the niche trajectory and, therefore, need to be explicitly considered by the niche theoretical framework. To address this problem the paper builds on and extends the socio-cognitive perspective to technology development, introducing a further dimension – space – which broadens the concept of technological niche and permits to better capture the complexity of niche behaviour. This extended framework is applied to the case of an emerging renewable energy technology – wave energy - which exhibits a particularly slow and non-linear development trajectory. The empirical analysis starts by examining how an “overall niche space” in wave energy was spatially constructed over time. Then it investigates in greater detail the niche development processes that took place in Portugal, a country that was among the pioneers in the field, and whose actors have been, from very early stages, engaged in the activities conducted at various spatial levels. Through this combined analysis, the paper seeks to understand whether and how niche development is shaped by processes taking place at different spatial levels. More specifically it investigates the interplay between territorial and relational elements in niche development, and how these different dynamics influence the performance of the niche processes and impact on the overall niche trajectory. The results confirm the niche multi-spatial dynamics, showing that it is shaped by the interplay between a niche relational space constructed by actors’ actions and interactions on/across levels, and the territorial effects introduced by these actors’ embeddedness in particular geographical and institutional settings. They contribute to a more precise understanding of the processes that can accelerate or slow down the trajectory of a technological niche. In addition, the results shed some light into the niche activities conducted in/originating from a specific territorial setting - Portugal - offering some insights into the behaviour of key actors and its implications for the positioning of the country in the emerging field, which can be relevant for the formulation of strategies and policies for this area.

Leptospirosis in northern Tanzania: exploring the role of rodents and ruminant livestock in a neglected public health problem

Leptospirosis is an important but neglected zoonotic disease that is often overlooked in Africa. Although comprehensive data on the incidence of human disease are lacking, robust evidence of infection has been demonstrated in people and animals from all regions of the continent. However, to date, there are few examples of direct epidemiological linkages between human disease and animal infection. In East Africa, awareness of the importance of human leptospirosis as a cause of non-malarial febrile illness is growing. In northern Tanzania, acute leptospirosis has been diagnosed in 9% of patients with severe febrile illness compared to only 2% with malaria. However, little is known about the relative importance of different potential animal hosts as sources of human infection in this area. This project was established to investigate the roles of rodents and ruminant livestock, important hosts of Leptospira in other settings, in the epidemiology of leptospirosis in northern Tanzania. A cross-sectional survey of rodents living in and around human settlements was performed alongside an abattoir survey of ruminant livestock. Unusual patterns of animal infection were detected by real-time PCR detection. Renal Leptospira infection was absent from rodents but was detected in cattle from several geographic areas. Infection was demonstrated for the first time in small ruminants sub-Saharan Africa. Two major Leptospira species and a novel Leptospira genotype were detected in livestock. L. borgpetersenii was seen only in cattle but L. kirschneri infection was detected in multiple livestock species (cattle, sheep and goats), suggesting that at least two distinct patterns of Leptospira infection occur in livestock in northern Tanzania. Analysis of samples from acute leptospirosis in febrile human patients could not detect Leptospira DNA by real-time PCR but identified social and behavioural factors that may limit the utility of acute-phase diagnostic tests in this community. Analysis of serological data revealed considerable overlap between serogroups detected in cattle and human leptospirosis cases. Human disease was most commonly attributed to the serogroups Mini and Australis, which were also predominant reactive serogroups in cattle. Collectively, the results of this study led to the hypothesis that livestock are an important reservoir of Leptospira infection for people in northern Tanzania. These results also challenge our understanding of the relationship between Leptospira and common invasive rodent species, which do not appear to maintain infection in this setting. Livestock Leptospira infection has substantial potential to affect the well-being of people in East Africa, through direct transmission of infection or through indirect effects on food production and economic security. Further research is needed to quantify the impact of livestock leptospirosis in Africa and to develop effective interventions for the control of human and animal disease.

Optimization of the Ion Source-Mass Spectrometry Parameters in Non-Steroidal Anti-Inflammatory and Analgesic Pharmaceuticals Analysis by a Design of Experiments Approach

The flow rates of drying and nebulizing gas, heat block and desolvation line temperatures and interface voltage are potential electrospray ionization parameters as they may enhance sensitivity of the mass spectrometer. The conditions that give higher sensitivity of 13 pharmaceuticals were explored. First, Plackett-Burman design was implemented to screen significant factors, and it was concluded that interface voltage and nebulizing gas flow were the only factors that influence the intensity signal for all pharmaceuticals. This fractionated factorial design was projected to set a full 2(2) factorial design with center points. The lack-of-fit test proved to be significant. Then, a central composite face-centered design was conducted. Finally, a stepwise multiple linear regression and subsequently an optimization problem solving were carried out. Two main drug clusters were found concerning the signal intensities of all runs of the augmented factorial design. p-Aminophenol, salicylic acid, and nimesulide constitute one cluster as a result of showing much higher sensitivity than the remaining drugs. The other cluster is more homogeneous with some sub-clusters comprising one pharmaceutical and its respective metabolite. It was observed that instrumental signal increased when both significant factors increased with maximum signal occurring when both codified factors are set at level +1. It was also found that, for most of the pharmaceuticals, interface voltage influences the intensity of the instrument more than the nebulizing gas flowrate. The only exceptions refer to nimesulide where the relative importance of the factors is reversed and still salicylic acid where both factors equally influence the instrumental signal. Graphical Abstract ᅟ.

Biochemical parameters response to weight loss in patients with non-alcoholic steatohepatitis.

Background: Non-alcoholic steatohepatitis (NASH) is a chronic liver disease that is capable of progressing to end-stage liver disease, but generally has a benign course. Non-alcoholic steatohepatitis (NASH) is a growing public health problem with no approved therapy. NASH projected to be the leading cause of liver transplantation in the United States by 2020. Obesity, non-insulin-dependent diabetes mellitus and hyperlipidaemia are the most common associations of the disease. Global prevalence of NASH is 10-24% amongst general population but increases to 25-75% in obese diabetic individuals. Objective: There is an urgent need for efficient therapeutic options as there is still no approved medication. The aim of this study was to detect changes in biochemical parameters including insulin resistance, cytokines, blood lipid profile and liver enzymes following weight loss in patients with non-alcoholic steatohepatitis. Materials and methods: One hundred obese patients with NASH, their age between 35-50 years, body mass index (BMI) from 30 to 35 Kg/m2 were included in the study in two subgroups; the first group (A) received moderate aerobic exercise training in addition to diet regimen , where the second group (B) received no treatment intervention. Results: The mean values of leptin, TNF-α, IL6, IL8, Alanine Aminotransferase (ALT), Aspartate Aminotransferase (AST), Homeostasis Model Assessment-Insulin Resistance- index (HOMA-IR), Total Cholesterol (TC), Low Density Lipoprotein Cholesterol (LDL-c) , Triglycerides (TG) and BMI were significantly decreased in group (A), where the mean value of Adiponectin and High Density Lipoprotein Cholesterol (HDL-c) were significantly increased, while there were no significant changes in group (B). Also, there was a significant difference between both groups at the end of the study. Conclusion: Weight loss modulates insulin resistance, adiponectin, leptin, inflammatory cytokine levels and markers of hepatic function in patients with nonalcoholic steatohepatitis.

Finding the set of k-additive dominating measures viewed as a flow problem

n this paper we deal with the problem of obtaining the set of k-additive measures dominating a fuzzy measure. This problem extends the problem of deriving the set of probabilities dominating a fuzzy measure, an important problem appearing in Decision Making and Game Theory. The solution proposed in the paper follows the line developed by Chateauneuf and Jaffray for dominating probabilities and continued by Miranda et al. for dominating k-additive belief functions. Here, we address the general case transforming the problem into a similar one such that the involved set functions have non-negative Möbius transform; this simplifies the problem and allows a result similar to the one developed for belief functions. Although the set obtained is very large, we show that the conditions cannot be sharpened. On the other hand, we also show that it is possible to define a more restrictive subset, providing a more natural extension of the result for probabilities, such that it is possible to derive any k-additive dominating measure from it.

Observed Social Problem Solving and Friendship Quality in Children with a Traumatic Brain Injury

Children who have experienced a traumatic brain injury (TBI) are at risk for a variety of maladaptive cognitive, behavioral and social outcomes (Yeates et al., 2007). Research involving the social problem solving (SPS) abilities of children with TBI indicates a preference for lower level strategies when compared to children who have experienced an orthopedic injury (OI; Hanten et al., 2008, 2011). Research on SPS in non-injured populations has highlighted the significance of the identity of the social partner (Rubin et al., 2006). Within the pediatric TBI literature few studies have utilized friends as the social partner in SPS contexts, and fewer have used in-vivo SPS assessments. The current study aimed to build on existing research of SPS in children with TBI by utilizing an observational coding scheme to capture in-vivo problem solving behaviors between children with TBI and a best friend. The current study included children with TBI (n = 41), children with OI (n = 43), and a non-injured typically developing group (n = 41). All participants were observed completing a task with a friend and completed a measure of friendship quality. SPS was assessed using an observational coding scheme that captured SPS goals, strategies, and outcomes. It was expected children with TBI would produce fewer successes, fewer direct strategies, and more avoidant strategies. ANOVAs tested for group differences in SPS successes, direct strategies and avoidant strategies. Analyses were run to see if positive or negative friendship quality moderated the relation between group type and SPS behaviors. Group differences were found between the TBI and non-injured group in the SPS direct strategy of commands. No group differences were found for other SPS outcome variables of interest. Moderation analyses partially supported study hypotheses regarding the effect of friendship quality as a moderator variable. Additional analyses examined SPS goal-strategy sequencing and grouped SPS goals into high cost and low cost categories. Results showed a trend supporting the hypothesis that children with TBI had fewer SPS successes, especially with high cost goals, compared to the other two groups. Findings were discussed highlighting the moderation results involving children with severe TBI.

Automorphism groups of non-orientable elliptic-hyperelliptic Klein surfaces with boundary

A classical study about Klein and Riemann surfaces consists in determining their groups of automorphisms. This problem is very difficult in general,and it has been solved for particular families of surfaces or for fixed topological types. In this paper, we calculate the automorphism groups of non-orientable bordered elliptic-hyperelliptic Klein surfaces of algebraic genus p> 5.

Distance and overcurrent relay coordination considering non standardized inverse time curves

Protective relaying comprehends several procedures and techniques focused on maintaining the power system working safely during and after undesired and abnormal network conditions, mostly caused by faulty events. Overcurrent relay is one of the oldest protective relays, its operation principle is straightforward: when the measured current is greater than a specified magnitude the protection trips; less variables are required from the system in comparison with other protections, causing the overcurrent relay to be the simplest and also the most difficult protection to coordinate; its simplicity is reflected in low implementation, operation, and maintenance cost. The counterpart consists in the increased tripping times offered by this kind of relays mostly before faults located far from their location; this problem can be particularly accentuated when standardized inverse-time curves are used or when only maximum faults are considered to carry out relay coordination. These limitations have caused overcurrent relay to be slowly relegated and replaced by more sophisticated protection principles, it is still widely applied in subtransmission, distribution, and industrial systems. In this work, the use of non standardized inverse-time curves, the model and implementation of optimization algorithms capable to carry out the coordination process, the use of different levels of short circuit currents, and the inclusion of distance relays to replace insensitive overcurrent ones are proposed methodologies focused on the overcurrent relay performance improvement. These techniques may transform the typical overcurrent relay into a more sophisticated one without changing its fundamental principles and advantages. Consequently a more secure and still economical alternative can be obtained, increasing its implementation area

Lot production size problem and simulation of urban transport

OBJECTIVES AND STUDY METHOD: There are two subjects in this thesis: “Lot production size for a parallel machine scheduling problem with auxiliary equipment” and “Bus holding for a simulated traffic network”. Although these two themes seem unrelated, the main idea is the optimization of complex systems. The “Lot production size for a parallel machine scheduling problem with auxiliary equipment” deals with a manufacturing setting where sets of pieces form finished products. The aim is to maximize the profit of the finished products. Each piece may be processed in more than one mold. Molds must be mounted on machines with their corresponding installation setup times. The key point of our methodology is to solve the single period lot-sizing decisions for the finished products together with the piece-mold and the mold-machine assignments, relaxing the constraint that a single mold may not be used in two machines at the same time. For the “Bus holding for a simulated traffic network” we deal with One of the most annoying problems in urban bus operations is bus bunching, which happens when two or more buses arrive at a stop nose to tail. Bus bunching reflects an unreliable service that affects transit operations by increasing passenger-waiting times. This work proposes a linear mathematical programming model that establishes bus holding times at certain stops along a transit corridor to avoid bus bunching. Our approach needs real-time input, so we simulate a transit corridor and apply our mathematical model to the data generated. Thus, the inherent variability of a transit system is considered by the simulation, while the optimization model takes into account the key variables and constraints of the bus operation. CONTRIBUTIONS AND CONCLUSIONS: For the “Lot production size for a parallel machine scheduling problem with auxiliary equipment” the relaxation we propose able to find solutions more efficiently, moreover our experimental results show that most of the solutions verify that molds are non-overlapping even if they are installed on several machines. We propose an exact integer linear programming, a Relax&Fix heuristic, and a multistart greedy algorithm to solve this problem. Experimental results on instances based on real-world data show the efficiency of our approaches. The mathematical model and the algorithm for the lot production size problem, showed in this research, can be used for production planners to help in the scheduling of the manufacturing. For the “Bus holding for a simulated traffic network” most of the literature considers quadratic models that minimize passenger-waiting times, but they are harder to solve and therefore difficult to operate by real-time systems. On the other hand, our methodology reduces passenger-waiting times efficiently given our linear programming model, with the characteristic of applying control intervals just every 5 minutes.

An expert model approach to assess the potential of non-wood forest products for forest owners

Mestrado em Engenharia Florestal e dos Recursos Naturais - Instituto Superior de Agronomia - UL

Injuries of non-lethal child physical abuse to the crania and orofacial regions: a scientific review

This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.