Fever response induced by intravenous and intracerebrovascular injection of pyrogen in thyroidectomised and protein-calorie malnourished rabbits

The development of a fever in response to intravenous (IV, 1.5 μg/kg body mass) and intracerebroventricular (ICV, 1.5 μg/animal) injections of Escherichia coli lipopolysaccharide (LPS) was studied in control, thyroidectomised and protein-calorie malnourished rabbits (New Zealand Whites, n = 55). ICV injection of LPS is control rabbits produced a fever response, the characteristics of which differed from those obtained after IV pyrogen injection. Thyroid deficiency caused an attenuated fever response, irrespective of whether LPS had been administered by IV or ICV injection. Protein-calorie malnourished rabbits showed a smaller fever response after IV or ICV pyrogen injections. Malnourished rabbits, refed over a period of 15 days, showed a typical biphasic fever response, but with lower magnitude than controls. The results of these experiments suggest that ICV injection of LPS is not an appropriate model for the study of fever mechanisms in disease states, and that the attenuated fever response observed in protein-calorie malnourished rabbits may be related, at least in part, to a decreased ability to produce the endogenous pyrogen interleukin-1.

Natriuresis induced by cholinergic stimulation of the locus coeruleus in the rat

Carbachol injected into the locus coeruleus (LC) induced a dose-dependent natriuresis in the rat. This natriuresis was maintained above control levels during the 120 min of urine sampling. Seizures and arterial blood pressure increase were also observed but they disappeared within 20 min after carbachol injection. Natriuresis was not obtained with either injections of carbachol outside the LC or with hypertonic solutions injected into the LC. Injection of atropine into the LC blocked the natriuresis induced by carbachol. In summary, our data show that carbachol induces natriuresis by an action on muscarinic receptors located in the LC region. © 1990.

Fine structure of the boundary tissue of the seminiferous tubuli of the vampire bat (Desmodus rotundus, G.; Microchiroptera).

Structurally the boundary tissue of the vampire bat seminiferous tubuli showed 2 to 5 layers of connective tissue in which elongated contractile cells and lamellar and/or fibrillar collagen were noticed. This boundary tissue forms the seminiferous tubular lamina propria. Its structure was more complex around the seminiferous tubuli near the Capsula testicularis than between the adjacent and contiguous tubuli into the testicular lobuli. The whole ultrastructural organization of the seminiferous lamina propria was described here.

Rabbit antibody responses to experimental infestation with Dermatobia hominis.

The three larval stages of Dermatobia hominis (Linnaeus) have been evaluated for their immunogenicity by ELISA and immunodiffusion (ID) using sera from experimentally infested rabbits. During a primary infestation, first instar D. hominis were found to cause most reaction and allowed the earliest diagnosis by ELISA. An inhibition of the antibody response against second and third instars was observed. The inhibition disappeared after departure of the larvae from the host. In experimentally immunized hosts the antibody response, following challenge, was highest against second and third instar antigens. Antibody remained elevated during the infestation but fell immediately after the larvae had left the host.

Pancreas damage and intratracheal NiCl2 administration. Effects of nickel chloride.

Changes in activities of Cu-Zn superoxide dismutase (SOD- E.C.1.15.1.1.) and lactate dehydrogenase (LDH- E.C.1.1.1.27.) and levels of copper, total protein, triglycerides, phospholipids and total lipids were investigated in pancreas of rats after intratracheal administration of NiCl2 (8.4 mumol/kg). Nickel chloride induced increased SOD activity in pancreas and erythrocytes. This elevation was related to increased copper and decreased phospholipid content in pancreas of these animals. In conclusion, the ability of an animal to tolerate nickel chloride induced damage was governed by a delicate balance between the generation of cytotoxic agents and the various pancreas defense capabilities.

Hydration-dependent conformational states of hemoglobin. Equilibrium and kinetic behavior

The equilibrium and kinetics of methemoglobin conversion to hemichrome induced by dehydration were investigated by visible absorption spectroscopy. Below about 0.20 g water per g hemoglobin only hemichrome was present in the sample; above this value, an increasing proportion of methemoglobin appeared with the increase in hydration. The transition between the two derivatives showed a time-dependent biphasic behavior and was observed to be reversible. The rates obtained for the transition of methemoglobin to hemichrome were 0.31 and 1.93 min-1 and for hemichrome to methemoglobin 0.05 and 0.47 min-1. We suggest that hemichrome is a reversible conformational state of hemoglobin and that the two rates observed for the transition between the two derivatives reflect the α- and β-chains of hemoglobin.

Antibody response to the 43 kDa glycoprotein of Paracoccidioides brasiliensis as a marker for the evaluation of patients under treatment

Sera of patients with paracoccidioidomycosis contained IgG-, IgA-, and IgM-specific antibodies to a 43 kDa antigen contained in the filtrate of a culture of Paracoccidioides brasiliensis. IgG- and IgA-specific antibodies were present in all observed patients. The IgM response was more frequent in acute cases, and the mean titers of IgG- and IgM-specific antibodies were higher in the acute forms. By the fourth month of chemotherapy, there was a decay of IgG, IgA, and IgM antibody titers to this antigen in acute cases, correlating with clinical improvement. The detection of IgG and IgA antibodies and the sequential determination of antibodies to the 43 kDa glycoprotein may be useful tools for serodiagnosis and evaluation of therapeutic efficacy.

Estudo histológico comparativo entre dois métodos de obtenção de cortes de alvéolos de ratos.

The chronology of the wound healing process following tooth extraction was studied by means of two kinds of histological cuts. Two groups of 42 albino rats were employed. In the first one, the sockets were cut in a transversal way. In the second one the cuts were performed in a longitudinal way. The rats were sacrificed after 3, 6, 9, 15, 21, 24, and 28 days following the surgeries. After laboratorial outline the obtained pieces were stained by hematoxylin and eosin for histological purposes. It way be concluded that: 1. The results got from longitudinal cuts were in agreement to those described by other authors; 2. The transversal cuts allow us to detect intensive resorption of the lateral alveolar wall at the cervical thirs; 3. On the 21st day following dental extraction the incisor socket of the rat shows a great deal of areas not ossified; 4. The healing process of dental extraction wounds of the upper incisor of the rat is completed between 24 and 28 post operative days.

Rugosidade superficial de ligas com alto conteúdo de cobre, em função do aquecimento acima da temperatura de fusão.

Being the surface roughness a fundamental property in the fit of the castings, it was determined the roughness of 5 high-copper casting alloys, according to the heating over their melting temperature. That way, the specimens made with smooth plastic in the shape of a rectangular plate, 2 mm x 7 mm x 11 mm were invested into a cristobalite investment. After heating and elimination on the plastic, the molds were filled by 3 g of molten alloy, casted in a electrical casting machine at the casting temperature at 25 degrees C and 50 degrees C overheating. The surface roughness was measured in a roughness analyser, Talysurf. As a result, it was verified that there is a variation of surface roughness among the alloys tested, and the heating of the alloys until 50 degrees C over the melting temperature does not interfere in the roughness.

Determinação de dureza de ligas de cobre, na forma como são recebidas e após a fundição, em função das técnicas de fusão.

It was evaluated the Vickers hardness of five high-copper casting alloys, in their original package form and after casting, according to the casting method used. That way, ten ingots, supplied by the manufacturers of each alloy, were included in self-curing acrylic resin, polished, numerated and submitted to Vickers hardness test at load of 200 g during 30 seconds. Afterwards the numerated ingots were removed from the acrylic resin and five of those were cast in an electrical casting machine and the other five in a centrifugal casting machine with an air/gas torch. The specimens obtained were included in self-curing acrylic resin, polished and submitted to Vickers hardness test. As a result it was verified that there is a variation of hardness among the alloys tested, and the use of the electrical casting machine produced lower hardness values than those produced when used the centrifugal casting machine with an air/gas torch. Also, there is a decrease of hardness of the cast alloys when they are tested in their original form and after casting.