Influence of Tapered and External Hexagon Connections on Bone Stresses Around Tilted Dental Implants: Three-Dimensional Finite Element Method With Statistical Analysis

Background: The purpose of this study is to analyze the tension distribution on bone tissue around implants with different angulations (0 degrees, 17 degrees, and 30 degrees) and connections (external hexagon and tapered) through the use of three-dimensional finite element and statistical analyses.Methods: Twelve different configurations of three-dimensional finite element models, including three inclinations of the implants (0 degrees, 17 degrees, and 30 degrees), two connections (an external hexagon and a tapered), and two load applications (axial and oblique), were simulated. The maximum principal stress values for cortical bone were measured at the mesial, distal, buccal, and lingual regions around the implant for each analyzed situation, totaling 48 groups. Loads of 200 and 100 N were applied at the occlusal surface in the axial and oblique directions, respectively. Maximum principal stress values were measured at the bone crest and statistically analyzed using analysis of variance. Stress patterns in the bone tissue around the implant were analyzed qualitatively.Results: The results demonstrated that under the oblique loading process, the external hexagon connection showed significantly higher stress concentrations in the bone tissue (P < 0.05) compared with the tapered connection. Moreover, the buccal and mesial regions of the cortical bone concentrated significantly higher stress (P < 0.005) to the external hexagon implant type. Under the oblique loading direction, the increased external hexagon implant angulation induced a significantly higher stress concentration (P = 0.045).Conclusions: The study results show that: 1) the oblique load was more damaging to bone tissue, mainly when associated with external hexagon implants; and 2) there was a higher stress concentration on the buccal region in comparison to all other regions under oblique load.

Influence of Three Types of Abutments on Preload Values Before and After Cyclic Loading with Structural Analysis by Scanning Electron Microscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Histometric analysis and topographic characterization of cp Ti implants with surfaces modified by laser with and without silica deposition

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Confirmatory factor analysis of different versions of the Body Shape Questionnaire applied to Brazilian university students

This study aimed at evaluating the validity, reliability, and factorial invariance of the complete (34-item) and shortened (8-item and 16-item) versions of the Body Shape Questionnaire (BSQ) when applied to Brazilian university students. A total of 739 female students with a mean age of 20.44 (standard deviation = 2.45) years participated. Confirmatory factor analysis was conducted to verify the degree to which the one-factor structure satisfies the proposal for the BSQ's expected structure. Two items of the 34-item version were excluded because they had factor weights (lambda)< 40. All models had adequate convergent validity (average variance extracted =.43-.58; composite reliability=.85-.97) and internal consistency (alpha =.85-.97). The 8-item B version was considered the best shortened BSQ version (Akaike information criterion = 84.07, Bayes information criterion = 157.75, Browne-Cudeck criterion= 84.46), with strong invariance for independent samples (Delta chi(2)lambda(7)= 5.06, Delta chi(2)Cov(8)= 5.11, Delta chi(2)Res(16) = 19.30). (C) 2014 Elsevier Ltd. All rights reserved.

Analysis of the procedures used to evaluate suicide crime scenes in Brazil: A statistical approach to interpret reports

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of Clinical and Inflammatory Markers of Nonalcoholic Fatty Liver Disease in Postmenopausal Women with Metabolic Syndrome

Background: The aim of this study was to assess clinical and inflammatory markers in nonalcoholic fatty liver disease (NAFLD) in postmenopausal women with metabolic syndrome.Methods: This cross-sectional study included 180 Brazilian women (age >= 45 years and amenorrhea >= 12 months). Metabolic syndrome was diagnosed by the presence of at least three of the following indicators: Waist circumference (WC) > 88 cm, triglycerides (TGs) >= 150 mg/dL, high-density lipoprotein (HDL) < 50 mg/dL; blood pressure >= 130/85 mmHg; and glucose >= 100 mg/dL. NAFLD was diagnosed by abdominal ultrasound. Participants were divided into three groups: Metabolic syndrome alone (n = 53); metabolic syndrome + NAFLD (n = 67); or absence of metabolic syndrome or NAFLD (control, n = 60). Clinical, anthropometric, and biochemical variables were quantified. The inflammatory profile included adiponectin, interleukin-6 (IL-6) and tumor necrosis factor-alpha (TNF-alpha). Data were submitted to statistical analysis using a Tukey test, analysis of variance (ANOVA), chi-squared, Pearson correlation, and logistic regression (odds ratio, OR).Results: Women with metabolic syndrome + NAFLD, abdominal obesity, high glucose, and insulin resistance by HOMA-IR were compared to women with metabolic syndrome alone and controls (P < 0.05). High values of IL-6 and TNF-alpha and low values of adiponectin were observed among women with metabolic syndrome alone or metabolic syndrome + NAFLD when compared to controls (P < 0.05). In multivariate analysis, the variables considered as risk of NAFLD development were: High systolic blood pressure (SBP) [(OR 1.02, 95% confidence interval (CI) 1.0-1.04]; large WC (OR 1.07, 95% CI 1.01-1.13); insulin resistance (OR 3.81, 95% CI 2.01-7.13); and metabolic syndrome (OR 8.68, 95% CI 3.3-24.1). Adiponectin levels reduced NAFLD risk (OR 0.88, 95% CI 0.80-0.96).Conclusion: In postmenopausal women, metabolic syndrome, abdominal obesity, and insulin resistance were risk markers for the development of NAFLD, whereas higher adiponectin values indicated a protection marker.

Genetic analysis of feet and legs in Nelore cattle

Pós-graduação em Genética e Melhoramento Animal - FCAV

Surface roughness analysis of dental ceramics treated with hydrofl uoric acid and aluminum oxide jet

The aim of this study was to evaluate the surface roughness of 5 indirect restorative materials treated with hydrofluoric acid to 10%, with aluminum oxide jet and a combination of both. The specimens was prepared with 10 mm in diameter and 2 mm thickness, divided into fi ve groups: (1) Ceromer (CeseadII-Kuraray), (2) Leucite crystals ceramics (IPS EmpressIIIvoclarforcasket), (3) glass ceramic with fluorapatite (IPS D. Sign-Ivoclar), (4) lithium disilicate ceramic (IPS Empress II-Ivoclar restorations), (5) ceramics (Cergogold-Degussa). For all groups were performed the controls, and the surfaces with the 3 types of treatment. For testing roughness used the rugosimeter Taylor/Hobson-Precision, model form tracerSV-C525 high sensitivity. After confi rmation of variance analysis with a signifi cance level of 1% (p < 0.01), there was equality between the average roughness of materials from groups 1, 3 and 5, and the group 2 was different from the others. It was also found that the ceramics of the group 5 behaved similar to group 4. However the lowest average roughness was observed in group 2 ceramic. In the evaluation between the types of treatment, the aluminum oxide jet and associations and blasting with hydrofl uoric acid were similar, and different isolated hydrofl uoric acid, and 3 types of treatment signifi cantly higher than the control group. All treatments promoted superfi cial alterations in all tested materials.

In vitro study of color stability of polycrystalline and monocrystalline ceramic brackets

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Meta-analysis of the response of broilers to the digestible lysine intake

Pós-graduação em Zootecnia - FCAV

Evaluation of the Atibaia River water quality using Lecane bulla as a test organism

In view of the diversity of environments found in the Brazilian territory, it is understandable that the use of native species can provide more relevant information for ecotoxicological studies. The purpose of this work was to evaluate the quality of water samples from the Atibaia River in an area that is under the influence of petroleum refinery using a native test-organism and submitting the data to PCA statistical analysis. Therefore, acute toxicity assays with Lecane bulla (Rotifera) were performed in four locations of the river, as well as physical-chemical analyses. Sampling was drawn in the dry and rainy seasons. The bioassays were static and lasted 48 hours; dead organisms were quantified at the end of the tests. Toxicological differences among the samples/per location and control were compared by means of the Analysis of Variance. Physical-chemical and mortality variables were simultaneously analyzed by multivariate analysis of the principal components and the Pearson correlation coefficient. Water samples from the exit of the refinery stabilization pond (location S.1) were toxic to L. bulla in both seasons, with significant differences in relation to the control and between the seasons. The statistical treatment of data showed that mortality was strong and positively correlated with total hardness, chlorides and EC, which together with pH presented higher values in location S.1, in the dry and in the rainy seasons. Due to its sensibility to the quality of the Atibaia river water samples, the potential use of L. bulla for ecotoxicological studies as an alternative test organism could be demonstrated.

Biomechanical influence of crown-to-implant ratio on stress distribution over internal hexagon short implant: 3-D finite element analysis with statistical test

The study of short implants is relevant to the biomechanics of dental implants, and research on crown increase has implications for the daily clinic. The aim of this study was to analyze the biomechanical interactions of a singular implant-supported prosthesis of different crown heights under vertical and oblique force, using the 3-D finite element method. Six 3-D models were designed with Invesalius 3.0, Rhinoceros 3D 4.0, and Solidworks 2010 software. Each model was constructed with a mandibular segment of bone block, including an implant supporting a screwed metal-ceramic crown. The crown height was set at 10, 12.5, and 15 mm. The applied force was 200 N (axial) and 100 N (oblique). We performed an ANOVA statistical test and Tukey tests; p < 0.05 was considered statistically significant. The increase of crown height did not influence the stress distribution on screw prosthetic (p > 0.05) under axial load. However, crown heights of 12.5 and 15 mm caused statistically significant damage to the stress distribution of screws and to the cortical bone (p <0.001) under oblique load. High crown to implant (C/I) ratio harmed microstrain distribution on bone tissue under axial and oblique loads (p < 0.001). Crown increase was a possible deleterious factor to the screws and to the different regions of bone tissue. (C) 2014 Elsevier Ltd. All rights reserved.

Genetic analysis of the temperament of Nellore cattle using linear and threshold models

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Analysis of relevant factors in patients with oral and pharyngeal cancers

This study presented an epidemiological data of 177 medical records of patients affected by oral and pharyngeal cancers with prosthesis indication. The gender, age, sun exposure, disease diagnosis, cancer anatomic site, radiation treatment and type of prosthesis, death from oral and pharyngeal cancers were collected. Data were analyzed by summary measures and logistic regression analysis. The mean age of the patients was 62.7 years, and 46.8％ died between 52 and 62 years old. Most of the patients were male (74％), and 42％ died among them. Squamous cell carcinoma was the most prevalent cancer (75.1％) and 42.1％ of these patients died. The age, gender, diagnosis and the interaction of these factors exhibited strong association with the patients’ death (P<.05, Chi-square test). The multivariate odds ratios (OR) of the death were 0.40 for women and 0.39 for other pathologies versus male and squamous cell carcinoma, respectively. It was concluded that age, gender and diagnosis of cancer had significant effect on patients’ death.

The effects of 2 mg chlormadinone acetate/30 mcg ethinylestradiol, alone or combined with spironolactone, on cardiovascular risk markers in women with polycystic ovary syndrome

Background: Polycystic ovary syndrome (PCOS) is an endocrine disorder associated with metabolic dysfunction and changes in cardiovascular risk markers, and using oral contraceptives (OCs) may exert a further negative effect on these alterations in patients with PCOS. Thus, the primary objective of this study was to assess the effects on arterial function and structure of an OC containing chlormadinone acetate (2 mg) and ethinylestradiol (30 mcg), alone or combined with spironolactone (OC+SPL), in patients with PCOS. Study Design: This was a randomized, controlled clinical trial. Fifty women with PCOS between 18 and 35 years of age were randomized by a computer program to use OC or OC+SPL. Brachial artery flow-mediated vasodilation, carotid intima-media thickness and the carotid artery stiffness index were evaluated at baseline and after 6 and 12 months. Serum markers for cardiovascular disease were also analyzed. The intragroup data were analyzed using analysis of variance with Tukey's post hoc test. A multivariate linear regression model was used to analyze the intergroup data. Results: At 12 months, the increase in mean total cholesterol levels was greater in the OC+SPL group than in the OC group (27% vs. 13%, respectively; p=.02). The increase in mean sex hormone-binding globulin levels was greater in the OC group than in the OC+SPL group (424% vs. 364%, respectively; p=.01). No statistically significant differences between the groups were found for any of the other variables. Conclusion: The addition of spironolactone to an OC containing chlormadinone acetate and ethinylestradiol conferred no cardiovascular risk-marker advantages in young women with PCOS. (C) 2012 Elsevier Inc. All rights reserved.