Zirconia needles synthesized inside hexagonal swollen liquid crystals

We report the synthesis of zirconia microneedles by the direct nucleation of particles inside a hexagonal swollen liquid crystal (SLC) (cell parameter a = 27 nm) prepared by mixing with the proper ratio, an aqueous solution of sulfated zirconium colloids, a cationic surfactant (cetylpyridinium chloride), cychlohexane as swelling agent with an oil over water ratio of 2.5 (vol.), and 1-pentanol as cosurfactant. After a slow crystallogenesis that can be enhanced by an initial induction step under moderate temperature, particles in the centimeter range can be obtained, with a very high shape ratio (over 100). These particles are made of crystalline octahydrate zirconium oxychloride containing pores of 20 nm diameter, aligned along the main axis of the liquid crystal, as the fingerprint of the oil cylinders present in the hexagonal phase. The morphology of these particles confirms that the shaping mechanism is based on true liquid crystal templating (TLCT). Further thermal treatment of these particles, after extraction from the SLC, leads to the crystallization of zirconia with the same needlelike morphology as the zirconium oxychloride.

Interface morphology snapshots of vertically segregated thin films of semiconducting polymer/polystyrene blends

We present atomic force microscopic images of the interphase morphology of vertically segregated thin films spin coated from two-component mixtures of poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylene-vinylene] (MEH-PPV) and polystyrene (PS). We investigate the mechanism leading to the formation of wetting layers and lateral structures during spin coating using different PS molecular weights, solvents and blend compositions. Spinodal decomposition competes with the formation of surface enrichment layers. The spinodal wavelength as a function of PS molecular weight follows a power-law similar to bulk-like spinodal decomposition. Our experimental results indicate that length scales of interface topographical features can be adjusted from the nanometer to micrometer range. The importance of controlled arrangement of semiconducting polymers in thin film geometries for organic optoelectronic device applications is discussed. (c) 2007 Elsevier Ltd. All rights reserved.

Seasonal presence of acicular calcium oxalate crystals in the cambial zone of Citharexylum myrianthum (Verbenaceae)

This study focuses on the seasonal presence of acicular crystals in the cambial zone of Citharexylum myrianthum Chain. (Verbenaceae). Specimens collected in different months from 1996 to 2000 were examined for the abundance of acicular crystals in the cambium. This information was correlated with the phenology of the species and the climate of the region. Acicular calcium oxalate crystals were found in cambial fusiform and ray cell initials, as well as in their daughter cells. An abundance of crystals was observed during periods of water deficit and leaf fall (July). Fewer crystals were found in the beginning of the wet season and bud swelling (September). When trees were flowering and the soil was wet (November and December), acicular crystals were rarely observed. During this period, acicular crystals were found in differentiating phloem and xylem parenchyma cells, in fully differentiated phloem cells, but not in fully differentiated xylem cells.

Effect of different surfactants on the shape, growth and photoluminescence behavior of MnWO4 crystals synthesized by the microwave-hydrothermal method

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Structural refinement, growth process, photoluminescence and photocatalytic properties of (Ba1-xPr2x/3)WO4 crystals synthesized by the coprecipitation method

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Microwave-assisted hydrothermal synthesis of nanocrystalline SnO powders

Tin oxide (SnO) powders were obtained by the microwave-assisted hydrothermal synthesis technique using SnCl2 center dot 2H(2)O as a precursor. By changing the hydrothermal processing time, temperature, the type of mineralizing agent (NaOH, KOH or NH4 OH) and its concentration, SnO crystals having different sizes and morphologies could be achieved. The powders were characterized by X-ray diffraction (X-ray), Field Emission Scanning Electron Microscopy (FE-SEM), High Resolution Transmission Electron Microscopy (HR-TEM) and Selected Area Electron Diffraction (SAED). The results showed that plate-like form is the characteristic morphology of growth and the TEM analyses indicate the growth direction as (200). (c) 2007 Elsevier B.V. All rights reserved.

Morphology and incidence of torus palatinus and mandibularis in Brazilian Indians

The incidence and morphology of torus platinus and mandibularis was verified in 200 Indians, residents of two Brazilian Indian Reserves in Sao Paulo State, Brazil. A low incidence of both types of exostoses was observed, with torus palatinus occurring more frequently than mandibularis. These structures did not occur in individuals less than 10 years of age. Flattened torus palatinus predominated in relation to the other forms.

Structural and surface morphology characterizations of oriented LiNbO3 thin films grown by polymeric precursor method

Polymeric precursor solution was used to deposit LiNbO3 thin films by dip coating on sapphire substrates. The effects of processing variables, such as heat treatment conditions and number of deposited layers, on crystallinity and morphology of the final films were investigated. X-ray diffraction patterns show the oriented growth of the films. The rocking curves, obtained around the (006) LiNbO3 peak, revealed that the shape peak and the FWHM value were influenced by the processing variables. According to these parameters, some films presented very homogeneous dense and smooth surfaces, as shown by the SEM and AFM studies.

Effect of air-powder system on titanium surface on fibroblast adhesion and morphology.

PURPOSE: To evaluate the number and morphology of fibroblasts grown on machined titanium healing abutments treated with an airpowder system. MATERIALS AND METHODS: Twenty-six abutments were assigned to two experimental groups: control (no treatment) and treated (exposed to the Prophy-Jet for 30 seconds). The specimens were incubated for 24 hours with fibroblastic cells in multiwell plates, followed by routine laboratory processing for scanning electron microscope analysis. The specimens were photographed at x 350, and the cell number was counted on an area of approximately 200 um2. RESULTS: No significant differences were found on morphology between the groups (P > 0.05); however, the control group presented a significantly greater amount of cells (71.44 +/- 31.93, mean +/- SD) in comparison with treated group (35.31 +/- 28.14), as indicated by a nonpaired t test (P = 0.001). CONCLUSION: The use of an air-abrasive prophylaxis system on the surface of titanium healing abutments reduced the cells proliferation but did not influence cell morphology.

Morphology and protein patterns of honey bee drone accessory glands.

We used light and transmission electron microscopy to examine the morphology of the accessory glands of immature and mature adult males of Apis mellifera L. We also made an electrophoretic analysis of the protein content of the mature gland. The glands of the immature male actively secrete a mucous substance that can be seen in the lumen of the gland of the mature male. This secretion stains with mercury bromophenol blue and with periodic acid-Schiff reaction, which stain glyconjugates. The protein content was higher in the lumen secretion than in the gland wall extracts. The electrophoresis patterns of the wall extracts were different from those of the secretion found in the gland lumen.

Cranial morphology and karyotypic analysis of Ceratophrys joazeirensis (Anura: Ceratophryidae, Ceratophrynae): Taxonomic considerations

The frog species Ceratophrys joazeirensis Mercadal, 1986 is only known from the Caatinga (semi-arid savanna) and, until recently, from the type locality of Juazeiro, State of Bahia, Brazil. It has now also been found in the States of Paraíba and Rio Grande do Norte, in environments of hypoxerophylic Caatinga. Cytogenetic and comparative analysis of the cranial morphology of C. joazeirensis and C. aurita (Raddi, 1823) were undertaken. The karyotype of the species is also shown for the first time. The results show important differences in the cranial morphology between C. joazeirensis (8n) and C. aurita (8n), species whose areas of distribution (Caatinga and Northeast Atlantic forest, respectively) are contiguous. The chromosomes of C. joazeirensis show similar size and morphology to the ones of C. aurita (C. dorsata), C. ornata Bell, 1843 (8n) and C. cranwelli Barrio, 1980 (2n). Such data would be in agreement with the opinion of some authors who consider these species to constitute a monophyletic group. Copyright © 2006 Magnolia Press.

New Neotropical species of Hygronemobius Hebard, 1913 (Orthoptera: Grylloidea: Nemobiinae), including a brief discussion of male genitalia morphology and preliminary biogeographic considerations of the genus

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Morphology and biometric of the vesicular and bulbourethral glands in castrated and non-castrated Santa Ines breed sheep

Introduction: The purpose of this paper is to determine the topography, biometry and light microscopy image of the vesicular and bulbourethral glands in order to analyze morphologic features of the accessory sexual glands in castrated and non-castrated animals. Materials and Methods: The morphology of the accessory sexual glands was investigated in 14 adult Santa Ines breed sheep, weighing 32 kg, on average. Six of them were castrated, and eight, non-castrated. For macroscopic study, the description of these two glands was carried out, as well as dissection and biometry study. Moreover, weight, length, height and width measurements were evaluated. For histological analysis, the vesicular and bulbourethral glands were sampled. Results: The topography of the reproductive glands was similar to bovine species. However, lower macroscopic measurements (p < 0,05) in the glands of the castrated sheep were evidenced when compared with the non-castrated ones. Characteristics such as shape of the glands, composition of the layer mucosa, the lamina propria, muscular, the excretory ducts and the adventitia were determined. Conclusion: Sheep castration promoted changes in the biometric measures of the glands, which were lower in castrated animals. The morphological and biometric characteristics of the vesicular and bulbourethral glands in sheep were determined.

Pollen morphology in Brazilian species of Codonanthe (Mart.) Hanst. and Nematanthus Schrader (Gesneriaceae)

Pollen morphology of 24 Brazilian species of Codonanthe and Nematanthus (Gesneriaceae) was investigated by means of light microscopy, scanning and transmission electron microscopy, in search of new characters that might contribute to taxonomic characterisation of the genera. The pollen grains are tricolpate or tricolporate, semitectate, reticulate, with simplicolumellate muri, sometimes with microreticulum and perforations, or duplicolumellate muri ring-shaped around lumina. The species studied were grouped into five pollen types on the basis of aperture characteristics and details of surface ornamentation. Sub-types were defined with reference to presence or absence of microreticulum and perforations around the lumina. Based on analysis of the morphology and measurements of pollen grains, we verified a close relationship among the genera, but can nevertheless discriminate their species. © 2013 Copyright Collegium Palynologicum Scandinavicum.

Morphology and anatomy of the diaspores and seedling of Paspalum (Poaceae, Poales)

RESUMO O conhecimento relativo ao diásporo e ao desenvolvimento pós-seminal de Paspalum L. é importante para a conservação da biodiversidade dos campos, devido sua importância na representatividade e no melhoramento genético de pastagens. A morfologia do diásporo e do desenvolvimento pós-seminal de Paspalum dilatatum Poir. (rizomatosa); P. mandiocanum Trin. var. subaequiglume Barreto (estolonífera), P. pumilum Nees. (cespitosa decumbente) e P. urvillei Steud. (cespitosa ereta) foi descrita procurando distinguir as espécies com diferentes formas de crescimento, e levantar características úteis para a taxonomia. P. dilatatum se diferencia por apresentar diásporo oval, de maior tamanho que as demais, com cinco nervuras salientes e tricomas; P. urvillei por apresentar diásporo com uma nervura central mais desenvolvida do que as duas nervuras laterais e tricomas; P. mandiocanum var. subaequiglume por apresentar diásporo com tricomas apenas na margem; e P. pumilum por apresentar diásporo glabro. A cariopse envolve a semente que apresenta embrião diferenciado, disposto lateralmente; apresenta hilo elíptico em todas as espécies estudadas e rostelo em P. dilatatum e P. mandiocanum var. subaequiglume. O desenvolvimento pós-seminal é semelhante nas quatro espécies e se inicia com a germinação, que é marcada pela emergência da coleorriza, seguida pelo coleóptilo. Essas características são comuns às demais Poaceae já estudadas, indicando um padrão para a família e não diferenciam as formas de crescimento.