Influência da angulação do implante e tipo de intermediário na distribuição das tensões

The aim of this study was to evaluate the influence of implant angulation and abutment type (UCLA and Estheticone) on stress distribution in screw-retained implant-supported prostheses through photoelasticity. Three models were fabricated with photoelastic resin PL-2 (Vishay, Micro-Measurements Group, Inc Raleigh, N.C., USA) containing one external hexagon implant with 3.75x10mm (Master screw, Conexão Sistemas de Prótese Ltda., Arujá, São Paulo) with 0°, 17° and 30° degrees and a screw-retained prostheses with UCLA and Estheticone abutments. The assembly was positioned in a circular polariscope; axial and oblique (45° degrees) loads of 100N were applied in fixed points on the occlusal crown surfaces by a universal testing machine. The stress generated was photographed and analyzed qualitatively with appropriate software (Adobe Photoshop®). The results demonstrated the same number of fringes for both abutment types for each angulation, with fringes increasing in the same way. A higher number of fringes were closer in the oblique loading mode. It was concluded that there was no significant difference in stress distribution in prostheses with UCLA and Estheticone abutments. Higher stress concentrations were observed with increased implant angulation. Stress concentration and intensity were higher in the oblique load than in axial load application.

Deslocamento de implante dentário para o seio maxilar: relato de caso

The residual alveolar ridges may be unfavorable for implant placement. The edentulous maxilla is often challenging for the oral surgeon because of the lack of bone as a consequence of alveolar ridge resorption and/or maxillary sinus pneumatization. Accidents or complications may occur when some of these issues are not being known. This article reports one case of implant displaced into the maxillary sinus, 27 days after sinus bone augmentation with simultaneous dental implant installation, causing moderated sinusitis symptoms. The implant was removed through oral cavity access to maxillary sinus.

Influência do formato do rebordo alveolar sagital em reabilitações com associação de prótese parcial removível de extremidade livre e implante ósseo integrado

The association of mandibular distal extension removable partial dentures with an osteointegrated implant is a treatment option at hasn't been fully explored by modern rehabilitation dentistry yet. The objective of this study is to evaluate, by means of the bidimensional method of finite elements, the distribution of tension on the structures supporting the distal extension removable partial denture (DERPD), associated to a 10.0 x 3.75 mm osteointegrated implant with an ERA retention system, in alveolar ridges of different shapes. Eight models were created, representing, from a sagittal perspective: Model A (MA) – a half arch with a horizontal ridge without posterior support, with the presence of the lower left canine, and a conventional DERPD, with metallic support in the incisal aspect of this canine, as replacement for the first and second pre-molars and the first and second molars of the lower left half arch; Model B (MB) – similar to MA, but different because of the presence of a 3.75 x 10.00 mm implant with an associated ERA retention system in the posterior region of the DERPD base; Model C (MC) - similar to MA, however with a distally ascending ridge format; Model D (MD) – similar to MC, but different because there is an implant associated to a retention system; Model E (ME) - similar to MA, however with a distally descending ridge format; Model F (MF) – similar to ME, but ditfferent in the sense that there is an implant with an associated ERA retention system; Model G (MG) – similar to MA, however with a distally descending-ascending ridge format; Model H (MH) – similar to MG, but different in the sense that there is an implant with an associated ERA retention system. The finite element program ANSYS 9.0 was used to load the models with vertical forces of 50 N, on each cuspid tip. The format of distal descending edge (ME and MF) was that presented worse results, so in the models with conventional RPD as in the models with RPD associated to the implant and ERA system of retention, for the structures gingival mucosa and tooth support. 1) the distally descending ridge presented the most significant stress in the model with the conventional RPD (ME) or with a prosthesis associated to an implant (MF) and 2) the horizontal ridge (MB) provided more relief to the support structures, such as the tooth and the spongy bone, when there was an implant associated to an ERA retention system. The incorporation of the implants with the ERA system retention, in the posterior area of the toothless edge, it promotes larger stability and retention to PPREL, improving the patient's masticatory acting and, consequently, its comfort and function.

Influencia del nivel de inserción ósea del diente soporte en el desplazamiento de PPR de extremidad libre mandibular asociada al implante oseointegrado

The rehabilitation with mandibular distal extension removable partial dentures (DERPD) is complex and the use of implants has been improving the functioning of this approach. The insertion bony level around of the last support tooth is an aggravating factor, since it can harm the longevity of the treatment. Thus, the aim of this research was to evaluate the displacement tendency of a mandibular DERPD associated to an implant, with different insertion bony levels and different connections between the RPD and the support tooth, by finite element analysis. Eight models were made: MA - DERPD, incisal rest, no bony loss; MB - DERPD, distal plate, no bony loss; MC - DERPD, incisal rest, no bony loss, with implant and ERA system; MD - DERPD, distal plate, no bony loss, with implant and ERA system; ME - DERPD, incisal rest, bony loss; MF - DERPD, distal plate, bony loss; MG - DERPD, incisal rest, bony loss, with implant and ERA system; MH - DERPD, distal plate, bony loss, with implant and ERA system. Loads of 50 N in each peak were applied. Displacement maps were obtained and showed that implant favors this association and the bony loss harms the prognostic of the prosthesis. It is concluded that: the introduction of the implant with ERA system reduced the displacement tendency of the tooth and supporting structures; introduction of distal plate reduced the movement tendency of the support tooth; the decrease of the periodontal support didn't influence significantly the displacement tendency of the models with distal plate distal, but it influenced the models with distal incisal rest.

Protocolo radiográfico para a instalação de mini-implantes: descrição da técnica

In the last decade mini-screws have gained popularity in orthodontics field and a correct placement of mini-screws is a critical point to the success of the skeletal anchorage. A careful clinical and radiographic diagnostic before insertion mini-screw is an essential requirement to achieve the central point of the radicular septum. The correct application of these pre-surgical procedures should avoid possible iatrogenic damages in periodontal ligament, dental roots, nasomaxillary cavities, or even important vascular tissues. As of today, periapical radiographs is a regular pre surgical procedure during mini-screw insertion technique. Nevertheless, accurate execution of the radiographic parallax technique can offer to us useful and precise radiographic images, to decide the right local insertion of mini-screws in to the septum bone. The purpose of this paper is to describe the ¬application of new positioning circular guides in conjunction with a ¬parallax radiographic protocol before placement of orthodontic mini-screws.

A mini review of Candida species in hospital infection: epidemiology, virulence factor and drugs resistance and prophylaxis

The introduction of more efficient diagnostic methods, new techniques in surgery and transplantation, antibiotics and chemotherapeutics more potent and novel materials for prostheses, catheters and probes significantly increased the life expectancy and quality of life of critically ill patients, on the other hand, hospital-acquired infections emerged as important iatrogenic complications. Invasive infections are a growing problem in public health hospitals in Brazil and worldwide. Among the various etiological agents found in the hospital environment, the genus Candida has been the third most frequently isolated pathogen. In general, invasive fungal infections are associated with high morbidity and mortality, difficulties in diagnosis, antimicrobial resistance, length of hospital stay and increased hospital costs. This mini review of the literature describes about epidemiology of hospital infection of Candida species, as well as its virulence factors and drugs resistance

Oclusão em prótese sobre implante - parte I

Osseointegrated implants have specific nature distinguish them from natural teeth making them more susceptible to the efforts generated by mastication. The absence of periodontal ligament, which absorbs the masticatory forces and allows the movement of the teeth interfere with the reception of occlusal loads and therefore the predictability of implants. In the boneimplant interface did not occur the phenomena of dissipation of impact, even the movement induced. Thus, during planning and installation of implant prosthesis, the type and characteristics of occlusal pattern adopted should be established with criteria to be no grounds for future failures. In this regard we highlight the occlusal overload generated by several reasons like the presence of premature contacts, interference during motion excursive, deleterious habits and inappropriate extensions on cantilevers. Thus, the objective is to provide a review of the literature regarding the importance of occlusion in oral rehabilitation with implants. Factors to be considered in establishing a favorable occlusion, consistent with prostheses on implants will be described

Oclusão em prótese sobre implante - parte II

In part I of this article, the factors related to the establishment of a favourable occlusion for the implant prosthodontics as well as its real importance in this kind of rehabilitation were showed up. However, it is known that the occlusal characteristics adopted in implant prosthodontics show specific patterns which must be different between each other in accordance to the type of prosthesis installed. The objective of the second part of this work is to present to the reader, by a literature review, those characteristics, justifying the reason because they must be associated to specific kind of prosthesis for favor the treatment established.

Análise das tensões em próteses implantossuportadas esplintadas, variando o tipo de conexão protética e a inclinação do implante: estudo pelo método dos elementos finitos tridimensionais não linear

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O brincar para conhecer o desenvolvimento de crianças com implante coclear

This research analyses the development of children presented with profound deafness and benefited by the cochlear implant, discovery of great significance in hearing health. The work is based, theoretically, on Winnicott, and methodologically, in anamnesis data and playing on a set of ludic scenes, systematically organized. Ten pre-school children with implants, selected by hospital and homogenization eligibility criteria participate in this study encompassing interviews with parents and playful observation sessions with the children, besides Lynn´s Dolls Structured Game. In the children, the results show immaturity, regression to earlier stages of their development, dependency and behavioral disorders, in particular, those related to language, interrelationship and anxiety. In the parents, family disorientation, partly overcome. The children and family participating are assisted by a multidisciplinary health team, at the hospital where they are attended.

Desempenho de crianças com deficiência auditiva e implante coclear em tarefas de seleção de e de nomeação de figuras

The aim of this study was to investigate the development of specific domains of Numerical Cognition (Number Sense – NS, Number Comprehension – NC, Number Production – NP, and Calculation – CA) in Brazilian children with Specific Learning Disorders. The study included 72 children (36 boys), from 9-to 10-years-old, enrolled in 4th and 5th years of elementary school of public schools at countryside of Sao Paulo State, Brazil. They were divided into three groups: control (CT, N = 42), Developmental Dyslexia (DL, N = 11) and Developmental Dyscalculia combined with dyslexia (DDc, N = 19). All participants had intellectual level within the normal range, however, children from the last two groups had Learning Disorders classified by School Achievement Test - TDE (Stein, 1994) and DDc children received necessarily classification as 'inferior' in Arithmetic Test of TDE. The children did not differ in NS. DL and DDc children showed slight deficits in NC. However, DDc children had moderate in NP and mild to moderate deficits in CA, which indicates a more generalized impairment in Numerical Cognition. Furthermore, DDc children showed discrepancy in Numerical Cognition performance when compared to the other groups. Thus, children with Learning Disorders showed different performances in Numerical Cognition, although both groups had preserved SN, DDc children showed higher deficits and discrepancy in relation DL and typically developing children.

Aprendizagem após via exclusão e formação de classes de equivalência em crianças com deficiência auditiva e implante coclear (aceito condicionalmente)

Studies on learning by exclusion have shown that participants tend to select a new object or a new figure when a new word is dictated, rejecting the objects and figures they already know or that were associated with other words. This study aimed at training conditional relations between dictated word-picture and between picture-printed word, by exclusion, and verify whether this training would be a condition for the emergence of relations between dictated word-printed word, printed word-figure, picture naming and reading. We also investigated whether responding to the words dictated with a female voice generalized to other frequencies such as male and child voices. Participants were five children between five and nine years old, with acute neurosensorial bilateral hearing impairment, users of cochlear implant Nucleus 24k®. They were exposed, individually, to tasks that consisted in selecting a comparison stimulus (either picture or printed word) related to the sample (either dictated word or picture). Words with lowest scores on a pre-test were used. The relations between dictated word-figure (AB) and figure-printed word (BC) were taught by exclusion. We assessed the emergence of the relations between dictated and printed words (AC), printed word and picture (CB), male and child voices generalization (A’C and A’’C), naming (BD) and reading (CD). All the children responded by exclusion and learned relations AB and BC, showing receptive vocabulary; AC and CB relations also were learned, consistent with class formation. Responding generalized to male and child voices, but data on naming were not systematic. Learning by exclusion was similar to that of children with typical hearing and these results describe some conditions that can improve receptive verbal repertoire.

Ecóico e nomeação de figuras em crianças com deficiência auditiva pré-lingual com implante coclear

The aim of this work was to verify the effect of teaching the echoic behavior over the pictures naming in four children between eight and nine years old with prelingual hearing impaired, users of cochlear implants. The design adopted was: (a) pre-training that taught the matching-to-sample task; (b) pre-tests that selected three words to teach; (c) teaching of auditory-visual conditional relations; (d) naming pos-test; (e) the teaching of echoic with orofacial clues and, (f) the second naming pos-test. In the pre-test all participants achieved smaller percentage of correct on naming (60%-80%) and echoic (20%-50%) when compared to percentages word recognition (86%-93%). All participants learned the auditory-visual relations. The improvement on naming test occurred after auditory training select based for two participants; for other two participants the improvement on naming test occurred just after the training of echoic. Analysis of data showed that the listening and speaking performances are independent in their establishment and require specific conditions of teaching; in the case of this study, even though the result is not generalized to all participants, the highest correspondence into point to point naming was obtained following the teaching of echoic.

Cinquenta anos do Mini Cooper: uma viagem pelo tempo por meio da Ilustração

The use of images as a mean of human knowledge transmission dates from the earliest records of visual communication with the cave paintings. Throughout history, the communicating function remained and was extended for a variety of approaches, including illustration, which plays an important role by transmitting a content to be communicated on a creative and unique way. The advertising area relies largely on the communicative power of illustration, using it as a visual aid on different ways and medias. The advertising pieces aimed at the automotive sector – especially those developed by BMW for the Mini Cooper model – broadly employs illustrations to spread the word about the product and its attributes, seeking to communicate it using an original way. With a qualitative approach to the case study, this article analyzes the illustrations produced by the South African design studio Am I Collective as part of a video prepared by South African advertising agency Blackriver FC as a celebration campaign for the fifty years of vehicle Mini Cooper, celebrated on 2009, and it aims to identify the illustrations visuals and compositions used in the construction of the covered temporal panorama.

Avaliação do reparo ósseo na interface osso/implante em ratos pinealectomizados: análise histológica, imunoistoquimica, histométrica, biomecânica e por microct

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)