942 resultados para Medium access control
Resumo:
The Iowa Department of Transportation's Access Management Task Force was established as part of the Iowa Department of Transportation's overall Safety Management System (SMS) effort. The goal of the Access Management Task Force is to develop a program designed to educate and market the concept and benefits of access management to landowners and developers, professional planners and engineers, planning and zoning staff members, appointed and elected officials, and motorists. Access management is pursued through the design and control of driveways, curb cuts, turning movements, interior circulation of parking lots, and public street connections and intersections. Usually, state highways or major urban and suburban arterial streets are the targets of access management projects. Access management is also a concern on main county roads when there is a transition from a rural environment to a town or city.
Resumo:
BACKGROUND: The visceral (VAT) and subcutaneous (SCAT) adipose tissues play different roles in physiology and obesity. The molecular mechanisms underlying their expansion in obesity and following body weight reduction are poorly defined. METHODOLOGY: C57Bl/6 mice fed a high fat diet (HFD) for 6 months developed low, medium, or high body weight as compared to normal chow fed mice. Mice from each groups were then treated with the cannabinoid receptor 1 antagonist rimonabant or vehicle for 24 days to normalize their body weight. Transcriptomic data for visceral and subcutaneous adipose tissues from each group of mice were obtained and analyzed to identify: i) genes regulated by HFD irrespective of body weight, ii) genes whose expression correlated with body weight, iii) the biological processes activated in each tissue using gene set enrichment analysis (GSEA), iv) the transcriptional programs affected by rimonabant. PRINCIPAL FINDINGS: In VAT, "metabolic" genes encoding enzymes for lipid and steroid biosynthesis and glucose catabolism were down-regulated irrespective of body weight whereas "structure" genes controlling cell architecture and tissue remodeling had expression levels correlated with body weight. In SCAT, the identified "metabolic" and "structure" genes were mostly different from those identified in VAT and were regulated irrespective of body weight. GSEA indicated active adipogenesis in both tissues but a more prominent involvement of tissue stroma in VAT than in SCAT. Rimonabant treatment normalized most gene expression but further reduced oxidative phosphorylation gene expression in SCAT but not in VAT. CONCLUSION: VAT and SCAT show strikingly different gene expression programs in response to high fat diet and rimonabant treatment. Our results may lead to identification of therapeutic targets acting on specific fat depots to control obesity.
Resumo:
Abstract
Resumo:
White adipose tissue (WAT) produces lactate in significant amount from circulating glucose, especially in obesity;Under normoxia, 3T3L1 cells secrete large quantities of lactate to the medium, again at the expense of glucose and proportionally to its levels. Most of the glucose was converted to lactate with only part of it being used to synthesize fat. Cultured adipocytes were largely anaerobic, but this was not a Warburg-like process. It is speculated that the massive production of lactate, is a process of defense of the adipocyte, used to dispose of excess glucose. This way, the adipocyte exports glucose carbon (and reduces the problem of excess substrate availability) to the liver, but the process may be also a mechanism of short-term control of hyperglycemia. The in vivo data obtained from adipose tissue of male rats agree with this interpretation.
Resumo:
BACKGROUND: Classical disease phenotypes are mainly based on descriptions of symptoms and the hypothesis that a given pattern of symptoms provides a diagnosis. With refined technologies there is growing evidence that disease expression in patients is much more diverse and subtypes need to be defined to allow a better targeted treatment. One of the aims of the Mechanisms of the Development of Allergy Project (MeDALL,FP7) is to re-define the classical phenotypes of IgE-associated allergic diseases from birth to adolescence, by consensus among experts using a systematic review of the literature and identify possible gaps in research for new disease markers. This paper describes the methods to be used for the systematic review of the classical IgE-associated phenotypes applicable in general to other systematic reviews also addressing phenotype definitions based on evidence. METHODS/DESIGN: Eligible papers were identified by PubMed search (complete database through April 2011). This search yielded 12,043 citations. The review includes intervention studies (randomized and clinical controlled trials) and observational studies (cohort studies including birth cohorts, case-control studies) as well as case series. Systematic and non-systematic reviews, guidelines, position papers and editorials are not excluded but dealt with separately. Two independent reviewers in parallel conducted consecutive title and abstract filtering scans. For publications where title and abstract fulfilled the inclusion criteria the full text was assessed. In the final step, two independent reviewers abstracted data using a pre-designed data extraction form with disagreements resolved by discussion among investigators. DISCUSSION: The systematic review protocol described here allows to generate broad,multi-phenotype reviews and consensus phenotype definitions. The in-depth analysis of the existing literature on the classification of IgE-associated allergic diseases through such a systematic review will 1) provide relevant information on the current epidemiologic definitions of allergic diseases, 2) address heterogeneity and interrelationships and 3) identify gaps in knowledge.
Resumo:
Este proyecto consiste en diseñar el algoritmo de control de un autogiro no tripulado. Su aplicación principal es llevar a cabo tareas rutinarias o peligrosas para el piloto como, por ejemplo, extinción de incendios, evaluación de riesgo químico o vigilancia de lugares de acceso restringido. Se realiza un estudio del movimiento del vehículo para obtener su modelo dinámico. A partir de las ecuaciones que describen su movimiento, se realiza una simulación numérica del vehículo. Se incorpora el controlador diseñado y se evalúa su funcionamiento. Finalmente, se implementa el sistema en un microcontrolador.
Resumo:
Environmentally harmful consequences of fossil fuel utilisation andthe landfilling of wastes have increased the interest among the energy producers to consider the use of alternative fuels like wood fuels and Refuse-Derived Fuels, RDFs. The fluidised bed technology that allows the flexible use of a variety of different fuels is commonly used at small- and medium-sized power plants ofmunicipalities and industry in Finland. Since there is only one mass-burn plantcurrently in operation in the country and no intention to build new ones, the co-firing of pre-processed wastes in fluidised bed boilers has become the most generally applied waste-to-energy concept in Finland. The recently validated EU Directive on Incineration of Wastes aims to mitigate environmentally harmful pollutants of waste incineration and co-incineration of wastes with conventional fuels. Apart from gaseous flue gas pollutants and dust, the emissions of toxic tracemetals are limited. The implementation of the Directive's restrictions in the Finnish legislation is assumed to limit the co-firing of waste fuels, due to the insufficient reduction of the regulated air pollutants in the existing flue gas cleaning devices. Trace metals emission formation and reduction in the ESP, the condensing wet scrubber, the fabric filter, and the humidification reactor were studied, experimentally, in full- and pilot-scale combustors utilising the bubbling fluidised bed technology, and, theoretically, by means of reactor model calculations. The core of the model is a thermodynamic equilibrium analysis. The experiments were carried out with wood chips, sawdust, and peat, and their refuse-derived fuel, RDF, blends. In all, ten different fuels or fuel blends were tested. Relatively high concentrations of trace metals in RDFs compared to the concentrations of these metals in wood fuels increased the trace metal concentrations in the flue gas after the boiler ten- to hundred-folds, when RDF was co-fired with sawdust in a full-scale BFB boiler. In the case of peat, lesser increase in trace metal concentrations was observed, due to the higher initial trace metal concentrations of peat compared to sawdust. Despite the high removal rate of most of the trace metals in the ESP, the Directive emission limits for trace metals were exceeded in each of the RDF co-firing tests. The dominat trace metals in fluegas after the ESP were Cu, Pb and Mn. In the condensing wet scrubber, the flue gas trace metal emissions were reduced below the Directive emission limits, whenRDF pellet was used as a co-firing fuel together with sawdust and peat. High chlorine content of the RDFs enhanced the mercuric chloride formation and hence the mercury removal in the ESP and scrubber. Mercury emissions were lower than theDirective emission limit for total Hg, 0.05 mg/Nm3, in all full-scale co-firingtests already in the flue gas after the ESP. The pilot-scale experiments with aBFB combustor equipped with a fabric filter revealed that the fabric filter alone is able to reduce the trace metal concentrations, including mercury, in the flue gas during the RDF co-firing approximately to the same level as they are during the wood chip firing. Lower trace metal emissions than the Directive limits were easily reached even with a 40% thermal share of RDF co-firing with sawdust.Enrichment of trace metals in the submicron fly ash particle fraction because of RDF co-firing was not observed in the test runs where sawdust was used as the main fuel. The combustion of RDF pellets with peat caused an enrichment of As, Cd, Co, Pb, Sb, and V in the submicron particle mode. Accumulation and release oftrace metals in the bed material was examined by means of a bed material analysis, mass balance calculations and a reactor model. Lead, zinc and copper were found to have a tendency to be accumulated in the bed material but also to have a tendency to be released from the bed material into the combustion gases, if the combustion conditions were changed. The concentration of the trace metal in the combustion gases of the bubbling fluidised bed boiler was found to be a summary of trace metal fluxes from three main sources. They were (1) the trace metal flux from the burning fuel particle (2) the trace metal flux from the ash in the bed, and (3) the trace metal flux from the active alkali metal layer on the sand (and ash) particles in the bed. The amount of chlorine in the system, the combustion temperature, the fuel ash composition and the saturation state of the bed material in regard to trace metals were discovered to be key factors affecting therelease process. During the co-firing of waste fuels with variable amounts of e.g. ash and chlorine, it is extremely important to consider the possible ongoingaccumulation and/or release of the trace metals in the bed, when determining the flue gas trace metal emissions. If the state of the combustion process in regard to trace metals accumulation and/or release in the bed material is not known,it may happen that emissions from the bed material rather than the combustion of the fuel in question are measured and reported.
Resumo:
Present book collects some of the thoughts developed during the 5 years (2004-2009) of work in the frame of the CHALLENGE project, "The Changing Landscape of European Liberty and Security". The project has related academic knowledge and research with the analysis of the policies and practices of the member States of the European Union [EU] around the couple liberty and security
Resumo:
Se llevó a cabo un experimento de 406 días en macetas para evaluar el nuevo inhibidor de la nitrificación, 3,4-dimetilpirazol fosfato (DMPP), añadido a purines de cerdo. Se utilizaron macetas que contenían tierra franca calcárea que fueron sujetas a los siguientes tratamientos: sin purín, 73,7; 147,3 y 221 cm3 de purín por maceta, todas con o sin tratamiento de DMPP. A los 18 días las macetas fueron sembradas con Lolium perenne L. El mayor rendimiento (36,3 g maceta-1) se obtuvo para el tratamiento con la dosis superior de purín y DMPP, siendo un 7,4% superior al mismo tratamiento sin inhibidor y un 46,1% superior al tratamiento control. Las plantas tratadas con dosis alta y mediana, más el DMPP, absorbieron el 70% del total del N durante la primera fase del experimento (104 días) mientras que sin inhibidor absorbieron el 55,3 y el 62% respectivamente. Se observó una reducción significativa del 17% en el N lixiviado en los tratamientos sin cultivo al aplicar DMPP. El inhibidor aumentó significativamente la eficiencia agronómica del purín (g materia seca g-1 N aplicado).
Resumo:
Lolium rigidum Gaud. is one of the most common weed species in winter cereals in Northeastern Spain. Herbicide resistance has been growing since the mid 90's and exclusive herbicide use is not enough in many cases, so that it is necessary to combine as many control tools as possible. Six field trials have been conducted during the cropping seasons 2001-02, 2002-03 and 2003-04 on winter cereal infested with herbicide resistant L. rigidum in Northeastern Spain testing different cultural control strategies. Sowing delay was conducted at five fields, mouldboard ploughing at four fields, the combination of sowing delay and ploughing at two fields, increasing the cereal sowing density and combined with sowing delay at one field. Sowing delay was confirmed to have an irregular efficacy depending on the L. rigidum emergence during the delay period. In the trials, weed emergence was reduced up to 88% in the best case but there was no effect in two cases. Ploughing had a more constant efficacy and reduced weed emergence between 50 and 80% although stoniness impeded in one occasion a correct soil inversion causing a very low efficacy. Increasing the cereal sowing rate did not reduce the weed population. The combination of the different methods did not increase significantly the individual efficacy, and one method was clearly more effective than the other, depending on the trial. In fields with high L. rigidum density, these methods are not effective enough and need to be combined with other methods, which are discussed in the text.
Resumo:
Actualmente se estudian diversos métodos alternativos a los procedimientos habituales de control de plagas y enfermedades de la fruta en post-cosecha, algunos de los cuales se utilizan ya a nivel comercial, como el empleo de microorganismos antagónicos, método en el que se centra el presente artículo. La fruta almacenada en cámaras frigoríficas supone una buena oportunidad para emplear sistemas de lucha biológica en el control de las enfermedades de post-cosecha, puesto que la fruta se encuentra bajo condiciones ambientales controladas, tanto de humedad relativa y temperatura como por la concentración de gases.
Resumo:
El objetivo de este trabajo fue comparar la eficacia de diversos productos químicos en el control del muérdago (Viscum album var austriacum) sobre Pinus halepensis. La experiencia consistió en la aplicación mediante tratamiento aéreo de diversas concentraciones de etefon, ácido giberélico y glifosato. Las combinaciones de ácido giberélico y glifosato obtuvieron las mayores eficacias, especialmente la que aplicó 7,8 g/ha de ácido giberélico y 540 g/ha de glifosato.
Resumo:
Se describen los métodos de muestreo, los umbrales de tolerancia y los métodos de control utilizados en un programa de control integrado de plagas de manzano basado en el control biológico de Panonychus ulmi Koch mediante Amblyseius andersoni Chant y en el empleo de productos selectivos cuando existen, contra el resto de las plagas, en Lleida. El programa se ha llevado a cabo en 6 fincas en las campañas 1989-90 y 1990-91. Sólo en un caso no se produjo control biológico de P. ulmi, siendo necesario un tratamiento acaricida. En general, los métodos de control del resto de las plagas han funcionado correctamente, aunque en algunos casos son tácticas conservadoras. Se discuten finalmente los distintos componentes del programa de control integrado y se señalan los objetivos del plan de trabajo futuro.
Resumo:
Se ha aplicado el Control Integrado de Plagas en unas 40 parcelas comerciales de manzano de Girona y de Lleida desde 1991 a 1993 con el objetivo de controlar biológicamente la araña roja (P. ulmi) mediante ácaros Phytoseiidae. Así mismo, se ha evaluado la estrategia de control de esta plaga, se han evaluado los factores principales que pueden influir en el éxito del control biológico y se ha diseñado una estrategia de defensa sencilla. En la mayoría de los casos, el control biológico se ha debido a la acción de Amblyseius andersoni o a la acción combinada de A. andersoni y A. californicus. A. andersoni impide el desarrollo de poblaciones elevadas de araña roja y la aparición de daños por decoloración. En las parcelas de Girona se ha producido la sustitución paulatina de A. californicus por A. andersoni. Los factores determinantes del éxito del control biológico fueron el nivel de actividad de P. ulmi y la presencia de A. andersoni, lo que plantea nuevas cuestiones relativas a cómo se puede favorecer la implantación de esta especie en parcelas comerciales. Finalmente, se propone una estrategia de defensa sencilla, basada en la época de aparición de la plaga y de los fitoseidos y en la relación que se establece entre ambas poblaciones durante el ciclo vegetativo.
Resumo:
Se ha aplicado la técnica de la tinción con el fluorocromo DAPI (4'-6- diamidino- 2-fenilindol) a la detección de organismos del tipo micoplasma («mycoplasma-like organisms» o MLOs) y al seguimiento, a lo largo de un año, de la distribución de MLOs en albaricoqueros enfermos de enrollamiento clorótico («apricot chloroiic leaf roll» o ACLR). Los resultados obtenidos confirman la poca fiabilidad de esta técnica para la detección precoz de micoplasmosis en árboles frutales, a causa de la baja concentración e irregular distribución de MLOs dentro de los árboles enfermos. Én cambio, la tinción con DAPI es útil para la observación a lo largo del año de la distribución de MLOs en diferentes partes de los árboles infectados por ACLR. A lo largo del invierno y la primavera, los MLOs fueron detectados solamente en las raíces y en los ramos formados el año anterior. La presencia de MLOs en los nuevos brotes no pudo ser detectada hasta el principio del verano. En trabajos previos se observaron grandes variaciones en la difusión natural del ACLR, incluso entre áreas próximas de la misma provincia de Valencia. Las investigaciones efectuadas ahora sobre las poblaciones de cicadélidos han mostrado que tanto el número de especies como el de individuos capturados son superiores en un área con una importante difusión natural del ACLR que en otra zona donde la difusión de la enfermedad es prácticamente nula. Las diferencias entre los cicadélidos capturados en estas dos áreas han proporcionado indicaciones acerca de las especies que tienen más probabilidades de ser vectores del ACLR. Se ha estudiado también, durante tres años, la influencia de tratamientos insecticidas y herbicidas sobre la difusión natural del ACLR en una plantación de albaricoqueros. En la mitad de la plantación que se dejó sin tratar, el número de cicadélidos capturados, así como el de nuevos árboles con síntomas de ACLR fue mayor que en la parte de la plantación que había sido tratada.