Strategies to reduce the number of variables and the combinatorial search space of the multistage transmission expansion planning problem

This paper proposes strategies to reduce the number of variables and the combinatorial search space of the multistage transmission expansion planning problem (TEP). The concept of the binary numeral system (BNS) is used to reduce the number of binary and continuous variables related to the candidate transmission lines and network constraints that are connected with them. The construction phase of greedy randomized adaptive search procedure (GRASP-CP) and additional constraints, obtained from power flow equilibrium in an electric power system are employed for more reduction in search space. The multistage TEP problem is modeled like a mixed binary linear programming problem and solved using a commercial solver with a low computational time. The results of one test system and two real systems are presented in order to show the efficiency of the proposed solution technique. © 1969-2012 IEEE.

Tumor-associated macrophages and the profile of inflammatory cytokines in oral squamous cell carcinoma

Objective: To evaluate and characterize macrophage populations (M1/M2) in the tumor microenvironment of oral cavity squamous cell carcinoma (OCSCC). The relationship between macrophages and clinicopathological factors, such as survival data, lymph node metastasis, tumoral proliferation, and WHO histological grading are also analyzed. Materials and methods: The samples consisted of surgically excised specimens from patients with non-metastatic and metastatic OCSCC and normal oral mucosa (control). Immunohistochemistry, flow cytometry, and qRT-PCR were used to evaluate macrophage populations and the expression of pro- (IL-12, IL-23, and INF-γ) and anti-inflammatory (IL-10 and TGF-β) cytokines. The level required for statistical significance was defined as p < 0.05. Results: The data showed a predominance of M2 phenotype (high percentage of IL-10+TGF-β+) macrophages in the tumor microenvironment of OCSCC. A higher percentage of macrophages expressing TGF-β was seen in the OCSCC group when compared with healthy individuals. The assessment of mRNA expression also presented a greater expression of anti-inflammatory cytokines TGFβ and IL10 in OCSCC when compared with the control group. The percentage of macrophages, demonstrated by immunohistochemistry, was significantly higher in the metastatic OCSCC group than in the non-metastatic and control groups. The log-rank test also showed that the mean survival time for patients with high levels of macrophages was less (44 months) when compared with patients with a low percentage of such cells (93 months). Conclusion: A predominance of the M2 phenotype in the tumor microenvironment of OCSCC could contribute to local immunosuppression, via TGF-β production, and consequently greater lymph node involvement and reduced patient survival time. © 2012 Elsevier Ltd. All rights reserved.

Extraoral alar base cinch. A modification for the technique

The alar base widening is directly related to the Le Fort I osteotomy which could lead to an undesirable facial change if not adequately controlled transoperatively. Several surgical techniques to control the lateralization and widening of the nasal base have been described in the literature. The extraoral technique, first described by Shams and Motamedi in 2002 seems to make this procedure more predictable and reliable. The authors preset a modification for that technique. © 2013 Asian AOMS, ASOMP, JSOP, JSOMS, JSOM, and JAMI.

Influence of the preparation method and the support on H2O 2electrogeneration using cerium oxide nanoparticles

This work describes the influence of the preparation method and the carbon support using a low contentof cerium oxide nanoparticles (CeO2/C 4%) on H2O2electrogeneration via the oxygen reduction reac-tion (ORR). For this purpose, the polymeric precursor (PPM) and sol-gel (SGM) methods with Vulcan XC72R (V) and Printex L6 (P) supports were employed. The materials were characterized by X-ray diffrac-tion (XRD), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). TheXRD analysis identified two phases comprising CeO2and CeO 2-x. The smallest mean crystallite size wasexhibited for the 4% CeO2/C PPM P material, which was estimated using the Debye-Scherrer equation tobe 6 nm and 4 nm for the CeO2and the CeO 2-xphases, respectively, and was determined by TEM to be5.9 nm. XPS analysis was utilized to compare the oxygen content of the 4% CeO2/C PPM P to Printex L6.The electrochemical analysis was accomplished using a rotating ring-disk electrode. The results showedthat the 4% CeO2/C specimen, prepared by PPM and supported on Printex L6, was the best electrocatalystfor H2O2production in 1 mol L -1NaOH. This material showed the highest ring current, producing 88%H2O2and transferring 2.2 electrons per O 2molecule via the ORR at the lowest onset potential. Addition-ally, the ring-current of the 4% CeO2/C PPM P material was higher than that of Vulcan XC 72R and PrintexL6, the reference materials for H2O 2production, indicating the highest electrocatalytic activity for the 4%CeO2/C PPM P material. © 2013 Elsevier Ltd. All rights reserved.

Comparative study of the life cycle assessment of particleboards made of residues from sugarcane bagasse (Saccharum spp.) and pine wood shavings (Pinus elliottii)

This paper presents a research on the environmental impacts of particleboards produced from wastes, based on a comparative Life Cycle Assessment study. The particleboards were manufactured in laboratorial scale from the following residues: sugarcane bagasse (Saccharum spp.) and pine wood shavings (Pinus elliottii). The study was developed following the methodological guidelines of ISO 14040. The functional unit adopted was the m2 of the particleboards produced and the impacts were evaluated by the Environmental Development of Industrial Products method. The results indicated that pine particleboard present the highest environmental impact potential. Our findings suggested that the factors that mostly aggravated the environmental impacts were: the distance between the raw materials and the production site, and formaldehyde emissions (FE). The first is related to the combustion of fossil fuel during the acquisition of raw material, which achieved the values of 2185.94 g/m2 for consumption of non-renewable resources for pine particleboard and 893.53 g/m2 for bagasse particleboard. The second is related to the use of urea-formaldehyde resin, responsible for the FE into the air during production. The FE is accountable for the contamination of approximately 7,800,000.00 m3 of air per m2 of particleboard produced, and was the factor with the greatest impact in human toxicity potential. © 2013 Elsevier Ltd. All rights reserved.

Production of biofilm by Listeria monocytogenes in different materials and temperatures

Listeria monocytogenes, considered as one of the most important foodborne pathogens, is easily found on surfaces, particularly in the form of a biofilm. Biofilms are aggregates of cells that facilitate the persistence of these pathogens in food processing environments conferring resistance to the processes of cleaning and may cause contamination of food during processing, thus, representing a danger to public health. Little is known about the dynamics of the formation and regulation of biofilm production in L.monocytogenes, but several authors reported that the luxS gene may be a precursor in this process. In addition, the product of the inlA gene is responsible for facilitating the entry of the microorganism into epithelial cells that express the receptor E-cadherin, also participates in surface attachment. Thus, 32 strains of L.monocytogenes isolated from different foods (milk and vegetables) and from food processing environments were analyzed for the presence of these genes and their ability to form biofilms on three different surfaces often used in the food industry and retail (polystyrene, glass and stainless steel) at different temperatures (4, 20 and 30°C). All strains had the ilnA gene and 25 out of 32 strains (78.1%) were positive for the presence of the luxS gene, but all strains produced biofilm in at least one of the temperatures and materials tested. This suggests that genes in addition to luxS may participate in this process, but were not the decisive factors for biofilm formation. The bacteria adhered better to hydrophilic surfaces (stainless steel and glass) than to hydrophobic ones (polystyrene), since at 20°C for 24h, 30 (93.8%) and 26 (81.3%) produced biofilm in stainless steel and glass, respectively, and just 2 (6.2%) in polystyrene. The incubation time seemed to be an important factor in the process of biofilm formation, mainly at 35°C for 48h, because the results showed a decrease from 30 (93.8%) to 20 (62.5%) and from 27 (84.4%) to 12 (37.5%), on stainless steel and glass, respectively, although this was not significant (. p=0.3847). We conclude that L.monocytogenes is capable of forming biofilm on different surfaces independent of temperature, but the surface composition may be important factor for a faster development of biofilm. © 2013 Elsevier Ltd.

Improvement of friable callus production of Boerhaavia paniculata Rich and the investigation of its lipid profile by GC/MS

Neste estudo, um protocolo para induzir maiores quantidades de calos friáveis de Boerhaavia paniculata RICH e uma técnica de lipidômica foram aplicados para investigar o perfil dos lipídios e serem comparados com aqueles presentes nas raízes desta planta, os quais apresentaram atividade anti-inflamatória no extrato hexânico bruto. A cultura de calo foi induzida a partir de sementes em meio sólido contendo sais de Murashige e Skoog com diferentes quantidades de glicose e diferentes concentrações de ácido 2,4-diclorofenoxiacético. Os frascos foram mantidos em câmara de germinação a 30 ± 2°C, com fotoperíodo de 16h sob intensidade luminosa de 27 µmol m^–2 s^–1 durante 4 semanas. Os melhores resultados para a formação de calo friável e desenvolvimento da biomassa foram obtidos no tratamento contendo 2,26 µM de 2,4-D e de glicose (1,5 %; m/v). Técnica de lipidômica foi aplicada na fração hexânica mostrando as concentrações mais elevadas de esteróides β-sitosterol (3,53 mg/100 g de cs - células seca ), e ácidos graxos; especialmente o ácido 2-hidroxi-tetracosanóico (0,34 mg/100 g cs), ácido eicosanoico (86,25 mg/100 g cs), ácido esteárico (420,83 mg/100 g cs), ácido tetradecanóico (10,74 mg/100 g cs) e ácido linoléico (100,61 mg/100 g cs). O perfil lipídico do calo versus aquele encontrado nas raízes da planta silvestre é descrito neste trabalho.

Spatial Distribution of the Risk of Dengue and the Entomological Indicators in Sumare, State of Sao Paulo, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Type-2 diabetes mellitus and the frequency of the G22A polymorphism of the adenosine deaminase gene in a mixed population in Brazil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Analysing the fate of nanopesticides in soil and the applicability of regulatory protocols using a polymer-based nanoformulation of atrazine

For the first time, regulatory protocols defined in the OECD guidelines were applied to determine the fate properties of a nanopesticide in two agricultural soils with contrasting characteristics. The nanoformulation studied had no effect on the degradation kinetics of atrazine indicating that (1) the release of atrazine from the polymer nanocarriers occurred rapidly relative to the degradation kinetics (half-lives 36-53 days) and/or that (2) atrazine associated with the nanocarriers was subject to biotic or abiotic degradation. Sorption coefficients, derived from a batch and a centrifugation technique at a realistic soil-to-solution ratio, were higher for the nanoformulated atrazine than for the pure active ingredient. Results indicate that the nanoformulation had an effect on the fate of atrazine. However, since the protocols applied were designed to assess solutes, conclusions about the transport of atrazine loaded onto the nanocarriers should be made extremely cautiously. The centrifugation method applied over time (here over 7 days) appears to be a useful tool to indirectly assess the durability of nanopesticides under realistic soil-to-solution ratios and estimate the period of time during which an influence on the fate of the active ingredient may be expected. More detailed investigations into the bioavailability and durability of nanopesticides are necessary and will require the development of novel methods suitable to address both the "nano" and "organic" characteristics of polymer-based nanopesticides.

Economic growth and the quality labour market of jobs created: a Brazilian case and some implications to Latin America

An outcome of economic growth is increased employment, but this should not be the only measure to assess a country's labour market, it is also important to verify whether the jobs created are considered good jobs. Thus, this study analyses the Brazilian labour market from 2000 to 2009, in terms of the quantity and quality of jobs generated in this period. To this end, a descriptive analysis was performed, in addition to an evaluation using econometrics and the data envelopment analysis (DEA) technique. The results of the research indicated that the Brazilian labour market is growing in terms of its quality.

Glycerol dehydration catalyzed by MWW zeolites and the changes in the catalyst deactivation caused by porosity modification

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Zirconium-methacrylate oxoclusters as new hybrid materials for the modification of epoxy systems

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Conventional and whitening toothpastes: Cytotoxicity, genotoxicity and effect on the enamel surface

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The changes on microstructure and electrical properties of Bi:2223/Ag composite as a function of the granulation and the content of the added silver powder

The Bi-Sr-Ca-Cu-O system has been one of the most studied superconducting ceramic materials for industry applications. The most of the studies with this aim are on silver/ceramic composites, due to the benefits and great compatibility of this metal with the oxide. In this paper we describe a systematic and comparative study on Ag/BSCCO composite, made by the citrate route, in which the ceramic pellets are sintered in the presence of silver powder using several proportions and having several granulations. It was observed that the introduction of fine (0.5 and 2 μm) silver powder in the proportions of 5 wt. % always implies in a better critical current density compared to the no silver pellet. According to the results, the silver powder in excess of 5 wt.% may not promote best electrical properties, depending on the size of the silver particles.