Bateria de métricas para avaliação da verdura material de reações de síntese

The use of a battery of three mass metrics (atomic economy - AE, reaction mass efficiency - RME, and mass intensity - MI) for systemic evaluation of the material greenness of synthesis reactions is presented. Material greenness is discussed in terms of materialization/dematerialization of the reaction system and also according to the first two Principles of Green Chemistry, and is shown to involve two components: atomic greenness (incorporation of the atoms provided by reagents into the product, evaluated by AE and RME); and massic greenness (global mass of reagents and non-stoichiometric materials, evaluated by MI, related to the production of residues).

Theoretical investigations of the bulk modulus in the tetra-cubic transition of PbTiO3 material

Resulting from ion displacement in a solid under pressure, piezoelectricity is an electrical polarization that can be observed in perovskite-type electronic ceramics, such as PbTiO3, which present cubic and tetragonal symmetries at different pressures. The transition between these crystalline phases is determined theoretically through the bulk modulus from the relationship between material energy and volume. However, the change in the material molecular structure is responsible for the piezoelectric effect. In this study, density functional theory calculations using the Becke 3-Parameter-Lee-Yang-Parr hybrid functional were employed to investigate the structure and properties associated with the transition state of the tetragonal-cubic phase change in PbTiO3 material.

Dissulfeto de molibdênio, um material multifuncional e surpreendente: doze anos depois

In 2002, a review article was published in which molybdenum disulfide properties were discussed. The last sentence of the article read as follows: "Based on that described above, we can conclude that in spite of the vast applications of molybdenum disulfide in several industrial branches, many of the potential applications need to be investigated in the future". Since 2002, novel properties of molybdenum disulfide have been described which promise to revolutionize science. The objective of the present review paper was to provide an overview of the processes of 2H-MoS2 exfoliation and properties of the single layers, reported mainly in the last decade.

Sedimentação de nutrientes e material particulado em reservatório sob influência de atividades de piscicultura no semiárido do Rio Grande do Norte

Nutrient levels in water reservoirs have been increasing over the years worldwide and fish farming is one of the activities with the potential to cause negative impacts on these environments. Thus, the sedimentation of the main nutrients was evaluated in a reservoir as well as the contribution of aquaculture in raising these rates. The results indicated a significant difference for all nutrients, with higher concentrations in areas near the fish farming, and lower levels in more distant regions. Therefore, assessments that focus only on the water column do not reflect the true impact of this activity.

Potentiometric determination of Nickel (II) ion using 2-hydroxy-1-naphthylidene-N-cyanoacetohydrazone as electroactive material

A potentiometric Nickel sensor was prepared using 2-hydroxy-1-naphthylidene-N-cyanoacetohydrazone as electro-active material and epoxy resin as a binding material. A membrane composed of 40% Schiff's base and 60% epoxy resin exhibited the best performance. The membrane showed excellent response in the concentration range of 0.15 ppm to 0.1 mol L- 1 Ni+2 ions with non-Nernstian slope of 22.0 mV/decade, had a rapid response time (less than 10 s), and can be used for three months without any considerable loss of potential. The sensor was useful within the pH range of 1.3 to 9.6, and was able to discriminate between Ni2+ and a large number of alkaline earth and transition metal ions. The practical utility of the sensor has been demonstrated by using it successfully as an indicator electrode in the potentiometric titration of Ni2+ with EDTA and oxalic acid.

OBTENÇÃO E CARACTERIZAÇÃO DE MATERIAL HÍBRIDO ENTRE SÍLICA E CICLODEXTRINAS

The obtention of silica and cyclodextrin hybrid materials was accomplished by refluxing them in xylol using citric acid as a binding agent. The materials were characterized by infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, scanning electron microscopy, and elemental analysis. Evidence for the docking of cyclodextrins α and γ was substantiated based on the variation in band intensity for groups such as ≡Si-OH. Additional docking evidence includes the displacement of some of the bands that are related to cyclodextrin such as the deformation of the C-H axial bond. The α and γ-CDSi materials were characterized as amorphous compounds. The products obtained in the synthesis showed changes in the decomposition temperatures of their isolated constituents, in which the mass of α and γ-CD docked to the silica surface gave the estimated values of 41% and 47%, respectively. The elemental constituents were shown to be consistent and close to their relative theoretical values. ​Thermogravimetric analysis showed that a reduction in the percentage of the hybrids was proportional to the amount of lost mass. This new material is an improvement over synthesized organosilane materials because the operator and the environment benefit from a less toxic methodology. In addition, the material has several potential applications in complexation systems with cyclodextrin.

Desenvolvimento e aplicação de método GC-MS/MS para análise simultânea de 17 HPAs em material particulado atmosférico

Os hidrocarbonetos policíclicos aromáticos (HPAs) estão associados ao aumento da incidência de diversos tipos de cânceres no homem. Essas moléculas são formadas principalmente na queima incompleta de matéria orgânica, sendo encontradas em todos os compartimentos ambientais. Órgãos regulamentadores das áreas ambiental e de saúde ocupacional consideram 17 HPAs como contaminantes atmosféricos prioritários. Este trabalho apresenta um método para análise simultânea destes HPAs utilizando-se a cromatografia a gás acoplada à espectrometria de massas operando no modo tandem (GC-MS/MS). Os limites de detecção e quantificação do método mostraram-se até 5 vezes inferiores aos obtidos no método GC-MS (SCAN). O método mostrou-se seletivo para análise de HPAs em extratos de amostras de material particulado atmosférico. Uma análise comparativa de dois sistemas de solventes (diclorometano/metanol 4:1 v/v e hexano/acetona 1:1 v/v) para a extração de HPAs, utilizando amostras de material particulado atmosférico, revelou que ambas as misturas de solventes possuem poder de extração semelhante. Os resultados sugerem que é possível realizar extração de HPAs de material particulado atmosférico em ultra-som com a mistura hexano/acetona (1:1), que é menos tóxica em relação à mistura diclorometano/metanol (4:1), bastante utilizada nestas análises, sem perdas significativas na exatidão do método.

Aplicação de material zeolítico sintetizado de cinzas de carvão como adsorvente de poluentes em água

Cinzas leve de carvão tratadas pelo método hidrotérmico foram usadas como adsorvente de baixo custo para a remoção de íons metálicos e corante de solução aquosa. As isotermas de adsorção das cinzas leve tratadas foram estudadas e os resultados foram ajustados pelos modelos de Langmuir e Freundlich. A isoterma de Freundlich descreveu melhor o processo de adsorção do azul de metileno. Os dados de equilíbrio para a adsorção dos íons zinco e cádmio se ajustaram melhor á equação de Langmuir. O valor máximo de capacidade de adsorção obtido foi de 0,78 (mg g-1)(L mg)1/n para o azul de metileno, 38,1 mg g-1 para o Zn2+ e 67, 5 mg g-1 para o Cd2+. Os materiais sintetizados exibiram capacidades de adsorção muito maiores do que as das cinzas leves usadas como matéria-prima. O estudo mostrou que o material zeólitico pode efetivamente adsorver azul de metileno e íons metálicos com eficiências de remoção na faixa de 82-99%.

Effects of Silica Based Biomaterials on Bone Marrow Derived Cells - Material Aspects of Bone Regeneration

Silica based biomaterials, such as melt-derived bioactive glasses and sol-gel glasses, have been used for a long time in bone healing applications because of their ability to form hydroxyapatite and to stimulate stem cell proliferation and differentiation. In this study, bone marrow derived cells were cultured with bioactive glass and sol-gel silica, and seeded into porous polymer composite scaffolds that were then implanted femorally and subcutaneously in rats to monitor their migration inside host tissue. Bone marrow derived cells were also injected intraperitoneally. Transplanted cells migrated to various tissues inside the host, including the lung, liver spleen, thymus and bone marrow. The method of transplantation affected the time frame of cell migration, with intraperitoneal injection being the fastest and femoral implantation the slowest, but not the target tissues of migration. Transplanted donor cells had a limited lifetime in the host and were later eliminated from all tested tissues. Bioactive glass, however, affected the implanted cells negatively. When it was present in the scaffold no donor cells were found in any of the tested host tissues. Bioactive glass S53P4 was found to support both osteoblastic and osteoclastic phenotype of bone marrow derived cells, but it was resistant to the resorbing effect of osteoclastic bone marrow derived cells, showing that bioactive glass is rather dissolved through physicochemical reactions than resorbed by cells. Fast-dissolving silica sol gel in microparticulate form was found to increase collagen formation by bone marrow derived cells, while slow dissolving silica microparticles enhanced their proliferation, suggesting that the dissolution rate of silica controls the response of bone marrow derived cells.

Uso de material didático sobre embriologia do sistema nervoso: avaliação dos estudantes

A Embriologia Humana é de extrema importância na formação de profissionais de saúde, porém seu estudo, muitas vezes, é considerado desestimulante, decorativo e sem significado prático para muitos estudantes, tornando-se pouco efetivo. Este trabalho objetivou produzir material didático interativo com modelos embrionários representativos do desenvolvimento embrionário do sistema nervoso. Para avaliar de forma qualitativa a real efetividade e capacidade de facilitar o processo de ensino-aprendizagem no contexto da Aprendizagem Baseada em Problemas, o material foi aplicado aos estudantes da primeira série de Medicina e Enfermagem da Faculdade de Medicina de Marília. Os estudantes consideraram que o material contribuiu para o entendimento do tema e facilitou a visualização dos eventos embrionários, além de despertar o interesse pelo estudo da disciplina. O material serviu como recurso para sedimentar o conhecimento e suscitou nos estudantes a integração dos conhecimentos com outras disciplinas. Em termos qualitativos, a análise dos questionários dos estudantes indicou que o material didático produzido foi efetivo na aprendizagem e funcionou como recurso na aprendizagem autodirigida, favorecendo a diversificação de fontes de busca e sendo complementar a livros-texto e outros materiais teóricos.

Inclusão de material herborizado em metacrilato para estudos de anatomia vegetal

As técnicas usuais empregadas no processamento de materiais herborizados são limitantes porque não permitem reproduzir um laminário permanente e porque o registro dos resultados é temporário. Em estudos de anatomia aplicada à taxonomia, muitas vezes, é necessário utilizar exsicatas. Este trabalho teve como objetivo testar a utilização de metacrilato (Historesin, Leica) na preparação e inclusão de material herborizado, visando a obtenção de laminário permanente. Foram utilizadas folhas de plantas herborizadas do gênero Senecio Tourn. ex L. (Asteraceae), previamente reidratadas em H2O e armazenadas em etanol 70%. As amostras foram desidratadas em série etanólica e submetidas à (1v:1v) mistura de AE 95% e resina pura. Durante a infiltração, com resina pura, o material foi submetido a vácuo durante 72 horas. Os blocos foram cortados em micrótomo de avanço automático, com navalhas de aço descartáveis, e os cortes foram corados com azul-de-toluidina (pH 4,0). As lâminas foram montadas em Permount. O laminário permanente obtido apresentou qualidade superior à dos produzidos pelas técnicas usuais, pois foi possível obter cortes seriados, com espessura determinada. Essa técnica possibilitou otimizar a obtenção de cortes, a partir de pequenos fragmentos de exsicatas.

Avaliação do processo produtivo de uma indústria de manufatura de painéis por meio do balanço de material e do rendimento da matéria-prima

O trabalho foi desenvolvido no setor de manufatura de painéis da Battistella Indústria e Comércio Ltda., localizada em Santa Catarina, e teve como objetivo a avaliação do processo produtivo de painéis, utilizando-se os princípios do balanço de material e do rendimento da matéria-prima. Além disso, pretendeu-se estabelecer uma metodologia para aplicação em outras indústrias madeireiras. Os dados foram obtidos através de visitas, aplicação de questionários e dados de escritório, e elaboraram-se equações e um fluxograma para representar o balanço de material. Concluiu-se que a indústria é integrada, representando vantagem competitiva. O balanço de material indicou que a atividade com maior potencial gerador de resíduos foi a preparação de sarrafos de madeira (55,71% do total de resíduos gerados). As atividades com maiores rendimentos foram a prensagem (97,44%), o seccionamento (93,92%), o esquadrejamento (93,51), o lixamento (90,97%) e a preparação de sarrafos (54,51%). O rendimento geral da manufatura foi de 63,16%, sendo os valores encontrados no trabalho similares aos da literatura. A metodologia desenvolvida para o trabalho é simples e pode ser aplicada em outras indústrias do setor madeireiro.

Determinação do fator de conversão em colônias de Atta sexdens rubropilosa (Hymenoptera: Formicidae) e sua relação com a qualidade do material vegetal cortado

As formigas cortadeiras (Atta e Acromyrmex) são consideradas importantes pragas na agricultura e silvicultura, mas pouco se sabe sobre os reais danos dessas espécies. Uma forma bastante difundida de avaliação do dano é por meio do cálculo da taxa de conversão, dividindo-se o peso do material cortado pelo peso de lixo produzido pelas colônias. Foi levantada a hipótese de que a qualidade do substrato cortado pode influenciar no forrageamento das operárias, alterando a taxa de conversão e dificultando as estimativas de dano. A taxa de conversão de oito colônias de Atta sexdens rubropilosa Forel (Hymenoptera: Formicidae) foi calculada com duas espécies vegetais com diferentes concentrações de lignina e celulose, para testar essa hipótese. Colônias mantidas com folhas de baixa qualidade (razão lignina/celulose elevada) tiveram maior forrageamento e produziram mais lixo. Entretanto, a taxa de conversão das colônias foi semelhante com essas duas plantas (média = 1,54). Esse valor está dentro da variação encontrada para outras espécies no campo (1,5-1,8), indicando um fator semelhante de conversão entre os gêneros Atta e Acromyrmex. O consumo médio de material vegetal, em termos de pesos seco e fresco, de uma colônia de A. sexdens rubropilosa com 4.500 operárias, foi estimado em 520 e 1.100 g/ano, respectivamente.

Wood as a model material for medical biomaterials. In vivo and in vitro studies with bone and Betula pubescens Ehrh

Novel biomaterials are needed to fill the demand of tailored bone substitutes required by an ever‐expanding array of surgical procedures and techniques. Wood, a natural fiber composite, modified with heat treatment to alter its composition, may provide a novel approach to the further development of hierarchically structured biomaterials. The suitability of wood as a model biomaterial as well as the effects of heat treatment on the osteoconductivity of wood was studied by placing untreated and heat‐treated (at 220 C , 200 degrees and 140 degrees for 2 h) birch implants (size 4 x 7mm) into drill cavities in the distal femur of rabbits. The follow‐up period was 4, 8 and 20 weeks in all in vivo experiments. The flexural properties of wood as well as dimensional changes and hydroxyl apatite formation on the surface of wood (untreated, 140 degrees C and 200 degrees C heat‐treated wood) were tested using 3‐point bending and compression tests and immersion in simulated body fluid. The effect of premeasurement grinding and the effect of heat treatment on the surface roughness and contour of wood were tested with contact stylus and non‐contact profilometry. The effects of heat treatment of wood on its interactions with biological fluids was assessed using two different test media and real human blood in liquid penetration tests. The results of the in vivo experiments showed implanted wood to be well tolerated, with no implants rejected due to foreign body reactions. Heat treatment had significant effects on the biocompatibility of wood, allowing host bone to grow into tight contact with the implant, with occasional bone ingrowth into the channels of the wood implant. The results of the liquid immersion experiments showed hydroxyl apatite formation only in the most extensively heat‐treated wood specimens, which supported the results of the in vivo experiments. Parallel conclusions could be drawn based on the results of the liquid penetration test where human blood had the most favorable interaction with the most extensively heat‐treated wood of the compared materials (untreated, 140 degrees C and 200 degrees C heat‐treated wood). The increasing biocompatibility was inferred to result mainly from changes in the chemical composition of wood induced by the heat treatment, namely the altered arrangement and concentrations of functional chemical groups. However, the influence of microscopic changes in the cell walls, surface roughness and contour cannot be totally excluded. The heat treatment was hypothesized to produce a functional change in the liquid distribution within wood, which could have biological relevance. It was concluded that the highly evolved hierarchical anatomy of wood could yield information for the future development of bulk bone substitutes according to the ideology of bioinspiration. Furthermore, the results of the biomechanical tests established that heat treatment alters various biologically relevant mechanical properties of wood, thus expanding the possibilities of wood as a model material, which could include e.g. scaffold applications, bulk bone applications and serving as a tool for both mechanical testing and for further development of synthetic fiber reinforced composites.

Spectrometrical Monitoring of Laser Sintering Process of Ceramic Material

This thesis is done as a part of project called FuncMama that is a project between Technical Research Centre of Finland (VTT), Oulu University (OY), Lappeenranta University of Technology (LUT) and Finnish industrial partners. Main goal of the project is to manufacture electric and mechanical components from mixed materials using laser sintering. Aim of this study was to create laser sintered pieces from ceramic material and monitor the sintering event by using spectrometer. Spectrometer is a device which is capable to record intensity of different wavelengths in relation with time. In this study the monitoring of laser sintering was captured with the equipment which consists of Ocean Optics spectrometer, optical fiber and optical lens (detector head). Light from the sintering process hit first to the lens system which guides the light in to the optical fibre. Optical fibre transmits the light from the sintering process to the spectrometer where wavelengths intensity level information is detected. The optical lens of the spectrometer was rigidly set and did not move along with the laser beam. Data which was collected with spectrometer from the laser sintering process was converted with Excel spreadsheet program for result’s evaluation. Laser equipment used was IPG Photonics pulse fibre laser. Laser parameters were kept mainly constant during experimental part and only sintering speed was changed. That way it was possible to find differences in the monitoring results without fear of too many parameters mixing together and affecting to the conclusions. Parts which were sintered had one layer and size of 5 x 5 mm. Material was CT2000 – tape manufactured by Heraeus which was later on post processed to powder. Monitoring of different sintering speeds was tested by using CT2000 reference powder. Moreover tests how different materials effect to the process monitoring were done by adding foreign powder Du Pont 951 which had suffered in re-grinding and which was more reactive than CT2000. By adding foreign material it simulates situation where two materials are accidently mixed together and it was studied if that can be seen with the spectrometer. It was concluded in this study that with the spectrometer it is possible to detect changes between different laser sintering speeds. When the sintering speed is lowered the intensity level of light is higher from the process. This is a result of higher temperature at the sintering spot and that can be noticed with the spectrometer. That indicates it could be possible to use spectrometer as a tool for process observation and support the idea of having system that can help setting up the process parameter window. Also important conclusion was how well the adding of foreign material could be seen with the spectrometer. When second material was added a significant intensity level raise could be noticed in that part where foreign material was mixed. That indicates it is possible to see if there are any variations in the material or if there are more materials mixed together. Spectrometric monitoring of laser sintering could be useful tool for process window observation and temperature controlling of the sintering process. For example if the process window for specific material is experimentally determined to get wanted properties and satisfying sintering speed. It is possible if the data is constantly recorded that the results can show faults in the part texture between layers. Changes between the monitoring data and the experimentally determined values can then indicate changes in the material being generated by material faults or by wrong process parameters. The results of this study show that spectrometer could be one possible tool for monitoring. But to get in that point where this all can be made possible much more researching is needed.