Governança democrática: por uma nova perspectiva de análise e construção das políticas de segurança pública no Brasil

Esta dissertação se dedica a fazer uma revisão da literatura sobre governança democrática, buscando contribuir com novos marcos conceituais na análise da gestão das políticas de segurança pública. Trata-se de apresentar uma nova perspectiva para analisar quais e como têm sido as políticas de segurança pública desenvolvidas no intuito de superar o problema da violência e da criminalidade de acordo com sua magnitude e complexidade. Para tanto, o trabalho destaca o papel do Estado na tarefa da governança, discutindo o exercício do monopólio legítimo da força visto da perspectiva da participação e inclusão de novos atores, da articulação entre órgãos e esferas de poder, da construção de novos padrões de autoridade e legitimidade, e da gestão integrada de políticas públicas em um ambiente democrático. A bibliografia sobre governança democrática tem o potencial de oferecer subsídios para esta análise, pois combina a abordagem política com a perspectiva administrativa, agregando às diretrizes gerais sobre a atuação do Estado indicações de critérios de formulação, monitoramento e avaliação de políticas públicas em uma sociedade cada vez mais dinâmica e multifacetada, cujas demandas prementes se colocam como desafio aos governos contemporâneos.

Modelos de gestão da inovação: um estudo de casos em empresas brasileiras do setor petroquímico

A inovação consiste em desafio premente para inúmeras organizações, de diferentes portes e missões. Dada sua relevância para as organizações públicas e privadas, de portes variados, assim como para as economias locais, regionais, nacionais e internacionais, a gestão da inovação constitui o cerne deste estudo de casos múltiplos. A gestão da inovação e seu alinhamento com a estratégia organizacional pode representar um diferencial competitivo significativo. Através de uma visão sistêmica sobre a gestão da inovação, é possível que as organizações gerem benefícios e externalidades que poderão atender a diversos atores envolvidos e públicos interessados no processo, tais como colaboradores, parceiros de negócios, fornecedores, usuários, clientes e agências do governo. A partir desta perspectiva, a estratégia de inovação é considerada uma abordagem central no que diz respeito à estratégia empresarial. Nossa intenção na realização desta pesquisa é compreender a complexidade e o valor de processos de inovação em organizações e seus efeitos enquanto consequências de estratégias deliberadas e emergentes. Esta pesquisa propõe um modelo referencial a ser utilizado pelos gestores para o mapeamento de processos de variados graus de complexidade, com vistas a prestar suporte na gestão da inovação de produtos, processos e administrativa, de forma estruturada, com especial ênfase ao modelo do funil de inovação e sua interface com tecnologias de informação, assim como em processos organizacionais e interorganizacionais, que podem contemplar parcerias externas em inovação aberta. Foram desenvolvidos três estudos de caso, os quais formam a base deste modelo referencial. Todos os casos abrangem empresas do setor petroquímico brasileiro, sendo um caso de empresa de grande porte, a Braskem S.A., e dois casos de empresas de pequeno porte, respectivamente a Hausthene Poliuretanos Ltda. e a Prorevest Revestimentos de Poliuretanos e Peças Especiais Ltda. O modelo referencial proposto busca identificar as condições necessárias – os determinantes da inovação – que possibilitam a gestão da inovação em produtos, processos e em gestão, e seus possíveis resultados.

Integrating open innovation in the social innovation process: an exploratory study

Inovação tem se tornado um fenômeno cada vez mais complexo e dinâmico, com a mudança de um paradigma focado na inovação industrial, onde a inovação acontecia no produto ou no processo de fabricação, para outro baseado no conhecimento, muito mais amplo. Além disso, o conhecimento e a competência técnica não são mais considerados como um monopólio do departamento de pesquisa e desenvolvimento. Isto trouxe mudanças nas práticas de inovação, que se tornaram mais abertas e levaram as empresas a interagir cada vez mais com o seu ambiente. Por outro lado, a inovação tecnológica, cujo primeiro objetivo é de criar valor para a empresa, tem experimentado alguns limites para resolver problemas sociais, como o aquecimento global. As novas tecnologias têm a capacidade de melhorar a qualidade de vida de muita gente, mas não é suficiente. É nesse contexto que surge outro tipo de inovação, cujo objetivo é de maximizar o impacto positivo na sociedade: a inovação social. Estes dois paradigmas de inovação, mais adequados aos desafios atuais, têm alguns pontos em comum na sua integração com o ambiente externo: a sociedade e outros atores da inovação. No entanto, praticamente não existem estudos integrando inovação aberta e inovação social. Este trabalho estuda a integração destes dois modelos a partir de uma pesquisa exploratória, realizando entrevistas em profundidade com 11 dirigentes de organizações sociais. As iniciativas sociais parecem atrair mais organizações externas para colaborar do que empresas com fins lucrativos, já que são mais altruístas. Parecem integrar essas pessoas e procurar por mais ajuda, especialmente no momento de escalar o negócio. Ainda que algumas organizações têm como prioridade institucionalizar a inovação aberta, outras veem isto como secundário ou simplesmente não sabem como fazer. Isto resulta em uma colaboração mais informal, que não é focada em atividades de pesquisa e desenvolvimento, prática ausente nas empresas da nossa amostra.

Improvisação na música contemporânea de concerto : parâmetros para execução da cadenza da peça "The days fly by" de Frederic Rzewski

A presente pesquisa apresenta uma proposta de treinamento para a improvisação de uma cadenza na peça “The Days Fly By” de Frederick Rzewski. A improvisação é um aspecto que se manifesta de várias maneiras no trabalho e na trajetória deste compositor, sendo ele próprio pianista reconhecido por seus improvisos de cadenzas em concertos tradicionais. Seu processo de composição está intimamente relacionado ao da improvisação. É comum em suas composições a inclusão de uma seção em aberto para ser improvisada pelo intérprete. Utilizo os conceitos de referente, base de conhecimento de Jeff Pressing e ponto de partida de Bruno Nettl associados a um modelo de aprendizagem da improvisação proposto por Barry J. Kenny & Martin Gellrich. Esta pesquisa apresenta proposta de exercícios de improvisação fundamentados nos elementos detectados em uma análise da peça.

Elementos da cultura que dificultam a entrega de resultados em um órgão público da administração direta

Esta dissertação se insere no campo dos debates que apontam para o impacto da cultura nacional sobre a cultura organizacional, oferecendo, por meio de um estudo de caso, especificidades de um órgão público brasileiro pertencente à administração direta. O trabalho é dedicado à realização de um diagnóstico, buscando compreender como elementos da cultura desse órgão dificultam a sua entrega de resultados. Partindo de um referencial teórico que caracteriza os traços da cultura nacional na maneira brasileira de administrar, assim como da abordagem dos chamados intangíveis na gestão, foi realizado um mergulho na dinâmica organizacional, procurando identificar os passivos intangíveis que dificultam a entrega de seus resultados. Por meio das lentes dos próprios servidores, obtidas a partir de vinte e uma entrevistas em profundidade, foram levantadas as especificidades de cultura e gestão no referido órgão, debatendo temas como: missão, planejamento estratégico, liderança, processos e tecnologia da informação, pessoas, treinamentos e alocação dos recursos. O resultado das análises conduziu para a visão de uma necessidade premente na organização de se tratar o fator humano em uma visão estratégica, criando-se um novo contexto capacitante em busca da excelência organizacional. Foram propostas alternativas para iniciar a pavimentação desse novo caminho, que tem como alicerces principais a integração e o envolvimento de pessoas na busca por resultados.

Combating shoulder-surfing: a hidden button gesture based scheme

This project describes an authentication technique that is shoulder-surfing resistant. Shoulder surfing is an attack in which an attacker can get access to private information by observing the user’s interaction with a terminal, or by using recording tools to record the user interaction and study the obtained data, with the objective of obtaining unauthorized access to a target user’s personal information. The technique described here relies on gestural analysis coupled with a secondary channel of authentication that uses button pressing. The thesis presents and evaluates multiple alternative algorithms for gesture analysis, and furthermore assesses the effectiveness of the technique.

Motivating sustainable goal choices and providing effective feedback

Overconsumption of natural resources and the associated environmental hazards are one of today’s most pressing global issues. In the western world, individual consumption in homes and workplaces is a key contributor to this problem. Reflecting the importance of individual action in this domain, this thesis focuses on studying and influencing choices related to sustainability and energy consumption made by people in their daily lives. There are three main components to this work. Firstly, this thesis asserts that people frequently make ineffective consumption reduction goal choices and attempts to understand the rationale for these poor choices by fitting them to goalsetting theory, an established theoretical model of behavior change. Secondly, it presents two approaches that attempt to influence goal choice towards more effective targets, one of which deals with mechanisms for goal priming and the other of which explores the idea that carefully designed toys can exert influence on children’s long term consumption behavior patterns. The final section of this thesis deals with the design of feedback to support the performance of environmentally sound activities. Key contributions surrounding goals include the finding that people choose easy sustainable goals despite immediate feedback as to their ineffectiveness and the discussion and study of goal priming mechanisms that can influence this choice process. Contributions within the design of value instilling toys include a theoretically grounded framework for the design of such toys and a completed and tested prototype toy. Finally, contributions in designing effective and engaging energy consumption feedback include the finding that negative feedback is best presented verbally compared with visually and this is exemplified and presented within a working feedback system. The discussions, concepts, prototypes and empirical findings presented in this work will be useful for both environmental psychologists and for HCI researchers studying eco-feedback.

Estudo da zircônia reforçado com alumina

Ceramics materials have good properties including chemical stability, high hardness and wear resistance. Moreover, due to its fragility, can suffer failure under relatively low levels of tension. Actually zirconia is the material of choice in metal free dental prostheses used in dentistry due its inertia in physiological environment, good bending strength, hardness and fracture toughness. The alumina and mixed tungsten and titanium carbides additions, acting as reinforcement elements in the zirconia matrix, have as their main objective the improvement of mechanical properties of this material. In this work, samples of zirconia, zirconia with 30% wt of alumina and zirconia with 30% wt mixed carbides were analyzed. The samples were sintered by uniaxial hot pressing on 30 MPa pressure, for 1 hour in an argon atmosphere. They were physically characterized by porosity and density measurements, and mechanically by 3-points bending strength and Vickers microhardness. The X-ray diffraction was used for the phase identifications and microstructure was examined by scanning electron microscopy (SEM). The addition of mixed carbides as reinforcement elements in zirconia matrix provides improvements in all properties analyzed in this work. The alumina addition has dropped the zirconia strength, although it caused improvement in other properties

Efeito da adição de carbonatos em formulação de massa para revestimento cerâmico utilizando matérias-primas do Piauí

Piauí state is a major producer of traditional red ceramic burning as bricks, tiles and ceramic tiles, with its main production center located in the city of Teresina. The state has large reserves of raw materials that can be used in the ceramic coating as clays, quartz, talc and carbonates. However, in the preparation of ceramic bodies using only a mixture of clays with different characteristics. The study aims to evaluate the effect of adding two types of carbonates in the ceramic semiporous mass coating produced in Piauí and then to verify the potential use of these carbonates as supplementary raw material product manufactured or the feasibility of obtaining a ceramic plate that meets the specifications for the porous coating. For this, were characterized the ceramic Piauí coating mass, a calcitic carbonate and a dolomitic, were made in the levels of 2, 4, 8, 16, and 32%. The masses were formed by pressing and burneds in two environments: a laboratory furnace (1080°C, 1120°C, 1140°C, and 1160°C) and an industrial furnace (1140°C). Then, following tests of linear shrinkage water absorption, apparent porosity, bulk density and flexural strength. Furthermore, the fired specimens were tested for their macrostructure and microstructure. The results showed the possibility of using the carbonate in ceramic mass flooring produced in Piauí, as added in small proportions improved dimensional stability and increased mechanical strength of ceramics pieces. It also proved itself possible to produce porous coating when added in higher levels

Obtenção de uma porcelana dielétrica a partir de matérias-primas do Rio Grande do Norte

The dielectric porcelain is usually obtained by mixing various raw materials proportions and is used in the production of electronic equipment for various applications, from capacitors of high and low Power to insulators for low, medium, high and extra high voltage, which are used in distribution lines and transmission of electricity.This work was directed to the s tudy of technological properties of technic porcelain, made from raw materials extracted from pegmatites found in the regions of Seridó and the Alto Oeste of Rio Grande do Norte, which are made of kaolin, quartz and feldspar, abundant and high quality in these regions. The technic ceramics were obtained by mixing in appropriate levels, kaolin, feldspar, quartz and clay, the last item from a pottery in the city of Sao Gonçalo do Amarante, Rio Grande do Norte. During the development the following characterizations correlated to raw materials were made: laser particle sizing, x-ray diffraction, DTA and TG. The compositions studied were formed by uniaxial pressing at a pressure of 50 MPa and sintered at temperatures ranging from 1150 to 1350ºC and levels (times) of sintering between 30, 60, 90 and 120 minutes. The characterization of the samples were taken from the analysis of weight loss, linear shrinkage, porosity, stoneware curve, bulk density, flexural strength of three points, SEM and X-ray diffraction, TMA, Dielectric and cross Resistivity. The studied materials can be employed in producing the objects used in electrical engineering such as: insulators for low, medium and high-voltage electrical systems, command devices, bushing insulation for transformers, power capacitors, spark plugs, receptacles for fluorescent and incandescent light bulbs and others

Efeito da adição de feldspato e/ou resíduo de caulin em formulações à base de argila ilítica

The red pottery industry in Piauí state is well developed and stands out at the national context for the technical quality of its products. The floor and wall tile industry, however, is little developed since the state has only one company that produces red clay-based ceramic tiles. This thesis aims at using the predominantly illitic basic mass of the above mentioned industry, with the addition of feldspar and/or kaolin residue in order to obtain products of higher technical quality. Kaolin residue consists basically of kaolinite, muscovite mica and quartz; the feldspar used was potassic. In this experiment, basic mass (MB) was used for experimental control and fifteen formulations codified as follows: F2, F4, F8, F16, F32, FR2, FR4, FR8, FR16, FR32, R2, R4, R8, R16 and R32. All raw materials were dry-milled, classified, formulated and then humidified to 10% water. Thereafter, test samples were produced by unixial pressing process in a rectangular steel matrix (60.0 x 20.0 x 5.0) mm3 at (25 MPa). They were fired at four temperatures: 1080°C, 1120°C, 1160°C, with a heating rate of 10°C/min during up to 10 min in an electric oven, and the last one in an industrial oven with a peak of 1140°C, aim ing to confirm the results found in laboratory and, finally, technological tests were performed: MEA, RL, AA, PA, TRF and PF. The results revealed that the residue under study can be considered a raw material with large potential in the industry of red clay-based ceramic tiles, since the results found both in laboratory and in the industry have shown that the test samples produced from the formulations with up to 4% feldspar and those produced with up to 8% feldspar and residue permitted a reduction in the water absorption rate and an increase in the mechanical resistance while those samples produced with up to 4% residue had an increase in the mechanical resistance when compared to those produced from the basic mass and that the formulation with 2% feldspar and residue presented the best technological properties, lowering the sintering temperature down to 1120°C

Formulação de bloco intertravado cerâmico com adição de resíduos urbanos e industriais

The production of waste from urban and industrial activities is one of the factors of environmental contamination and has aroused attention of the scientific community, in the sense of its reuse. On the other hand, the city of Salvador/Ba, with approximately 262 channels, responsible for storm water runoff, produces every year, by the intervention of cleaning and clearing channels, a significant volume of sediments (dredged mud), and thus an appropriate methodology for their final destination. This study aims to assess the influence of incorporation of these tailings in arrays of clay for production of interlocked block ceramic, also known as ceramic paver. All the raw materials from the metropolitan region of Salvador (RMS) were characterized by x-ray fluorescence, x-ray diffraction, thermal analysis (TG and TDA), particle size analysis and dilatometry. With the use of statistical experimental planning technique, ternary diagram was defined in the study region and the analyzed formulations. The specimens were prepared with dimensions of 60x20x5mm³, by uniaxial pressing of 30 MPa and after sintering at temperatures of 900°, 1000º and 1100ºC the technological properties were evaluated: linear shrinkage, water absorption, apparent porosity, apparent specifies mass, flexural rupture and module. For the uniaxial compression strength used cylindrical probe body with Ø 50 mm. The standard mass (MP) was prepared with 90% by weight of clay and 10% by weight of Channel sediment (SCP), not being verified significant variations in the properties of the final product. With the incorporation of 10% by weight of manganese residue (PFM) and 10% by weight of the Ceramic waste (RCB) in the mass default, in addition to adjusting the plasticity due to less waste clay content, provided increased linear firing shrinkage, due the significant concentration of K2O, forming liquid phase at low temperature, contributing to decreased porosity and mechanical resistance, being 92,5 MPa maximum compressive strength verified. After extract test leachate and soluble, the piece containing 10% of the PFM, was classified as non-hazardous and inert material according to NBR10004/04 ABNT. The results showed the feasibility on using waste, SCP, RCB and PFM clay mass, at temperatures above 900ºC, paver ceramic production, according to the specifications of the technical standards, so that to exceed the 10% of the PFM, it becomes imperative to conduct studies of environmental impacts

Estudo da viabilidade do processo de reciclagem do material descartado do sistema Zirkonzanh® de produção de próteses dentárias

At present, the material of choice for performing aesthetic dental prosthetic work is in the ceramic. Among them, the ceramic base of stabilized zirconia with 3% yttria (3Y - TZP) stand out for having excellent physical and mechanical properties. During the machining of blocks of zirconia in the laboratory to prepare the various types of prostheses, much of the material is given off in the form of powder, which is subsequently discarded. The waste of this material results in financial loss, reflecting higher final cost treatment for patients, as well as damage to the environment, thanks to the processes involved in the manufacture and disposal of the ceramic. This research, pioneered the recycling of zirconium oxide powder obtained during milling of dental crowns and bridges, we highlight the social and environmental aspects and aims to establish a protocol for the reuse of waste (powder of zirconia Zirkonzahn® system) discarded to obtain a new block of compacted zirconia to maintain the same mechanical and microstructural properties of commercial high-cost imported material. To compare with the commercial material, samples were uniaxially (20 MPa) and isostatically (100 MPa), and its mechanical and microstructural characterization was performed through tests of density, porosity, dilatometry, X-ray diffraction (XRD), hardness, fracture toughness, resistance to fracture electron microscopy (SEM) and analysis of grain size. The results observed in the samples were isostatically pressed similiares those obtained with samples from the commercial material demonstrating the viability of the process

Efeito da velocidade de aquecimento nas propriedades de produtos da cerâmica estrutural

Heating rate is one of the main variables that determine a fire cycle. In industrial processes that use high temperatures, greater fire great can reduce the cost of production and increase productivity. The use of faster and more efficient fire cycles has been little investigated by the structural ceramic industry in Brazil. However, one of the possibilities that aims at modernizing the sector is the use of roller kilns and the inclusion of natural gas as fuel. Thus, the purpose of this study is to investigate the effect of heating rate on the technological properties of structural ceramic products. Clay raw materials from the main ceramic industries in the state of Rio Grande do Norte were characterized. Some of the raw materials characterized were formulated to obtain the best physical and mechanical properties. Next, raw materials and formulations were selected to study the influence of heating rate on the final properties of the ceramic materials. The samples were shaped by pressing and extrusion and submitted to rates of 1 °C/min, 10 °C/min and 20 °C/min, with final temperatures of 850 °C, 950 °C and 1050 °C. Discontinuous cycles with rates of 10 °C/min or 15 °C/min up to 600 °C and a rate of 20 °C/min up to final temperature were also investigated. Technological properties were determined for all the samples and microstructural analysis was carried out under a number of fire conditions. Results indicate that faster and more efficient fire cycles than those currently in practice could be used, limiting only some clay doughs to certain fire conditions. The best results were obtained for the samples submitted to slow cycles up to 600 °C and fast fire sinterization up to 950 °C. This paper presents for the first time the use of a fast fire rate for raw materials and clay formulations and seeks to determine ideal dough and processing conditions for using shorter fire times, thus enabling the use of roller kilns and natural gas in structural ceramic industries

Aplicação da metodologia de planejamento de experimentos para formulação de massas cerâmicas para telhas

Rio Grande do Norte State stands out as one great producer of structural clay of the brazilian northeastern. The Valley Assu ceramic tiles production stands out obtained from ilitics ball clays that abound in the region under study. Ceramics formulation and the design of experiments with mixture approach, has been applied for researchers, come as an important aid to decrease the number of experiments necessary to the optimization. In this context, the objective of this work is to evaluate the effects of the formulation, temperature and heating rate in the physical-mechanical properties of the red ceramic body used for roofing tile fabrication of the Valley Assu, using design of mixture experiments. Four clays samples used in two ceramics industry of the region were use as raw material and characterized by X-ray diffraction, chemical composition, differential thermal analysis (DTA), thermogravimetric analysis (TGA), particle size distribution analysis and plasticity techniques. Afterwards, they were defined initial molded bodies and made specimens were then prepared by uniaxial pressing at 25 MPa before firing at 850, 950 and 1050 ºC in a laboratory furnace, with heating rate in the proportions of 5, 10 e 15 ºC/min. The following tecnologicals properties were evaluated: linear firing shrinkage, water absorption and flexural strength. Results show that the temperature 1050 ºC and heating rate of 5 ºC/min was the best condition, therefore presented significance in all physical-mechanical properties. The model was accepted as valid based of the production of three new formulations with fractions mass diferents of the initial molded bodies and heated with temperature at 1050 ºC and heating rate of 5 ºC/min. Considering the formulation, temperature and heating rate as variables of the equations, another model was suggested, where from the aplication of design of experiments with mixtures was possible to get a best formulation, whose experimental error is the minor in relation to the too much formulations