Assessment of a strategy for the control of respiratory diseases in children

A programme for the control of respiratory diseases in children was conceived for the State of S. Paulo, Brazil, in 1986. Its progress thereafter and the epidemiology of the diseases concerned are examined. Apart from an inquiry into the 64 existing State local health authorities, a sample of 18,255 cases of children assisted by the programme at different levels, including both in-patient and outpatient care, is analysed. Each case record included information about identification (child, doctor and health facility), reasons for calling, diagnoses made and outcome of treatment. Further data were also sought from hospitals and from State mortality records. The programme was found to be poorly implemented in the State but, where implemented, it showed itself capable of resolving problems (only 0.5% of the cases could not be handled) as also of changing ongoing trends (more than 50% reduction in hospital admission rates). Individual assessment of each item of the programme indicated its bottlenecks. Regarding the epidemiology of respiratory diseases, it is observed that the major burden to health services comes from children aged less than five, and that the most important diseases are wheezing illnesses and pneumonia. Morevoer, they were found to be significantly associated (p = 0.000) so that a child in the community presenting wheezing diseases is 5 times more likely to develop pneumonia than a child with any other respiratory diagnosis. Similarly, among the under five deaths it was found that the risk for pneumonia is 3 times greater for children who died presenting wheezing diseases than it is for children with any other sort of diagnosis. In conclusion, the programme is deemed to be efficient and effective but its efficacy is marred by administrative flaws. The successful control of respiratory problems in childhood is related to a proper appreciation of the importance of wheezing diseases.

Toxicological Assessment of Coated versus Uncoated Rubber Granulates Obtained from Used Tires for Use in Sport Facilities

Reuse of tire crumb in sport facilities is currently a very cost-effective waste management measure. Considering that incorporation of the waste materials in artificial turf would be facilitated if the rubber materials were already colored green, coatings were specifically developed for this purpose. This paper presents an experimental toxicological and environmental assessment aimed at comparing the obtained emissions to the environment in terms of polycyclic aromatic hydrocarbons (PAHs), heavy metals, and ecotoxicity for coated and noncoated rubber granulates. This study is a comprehensive evaluation of the major potential critical factors related with the release of all of these classes of pollutants because previous studies were not systematically performed. It was concluded that between the two types of coatings tested, one is particularly effective in reducing emissions to the environment, simultaneously meeting the requirements of adherence and color stability.

Environmental life cycle assessment of concrete made with fine recycled concrete aggregates

The majority of worldwide structures use concrete as its main material. This happens because concrete is economically feasible, due to its undemanding production technology and case Of use. However, it is widely recognized that concrete production has a strong environmental impact in the planet. Natural aggregates use is one of the most important problems of concrete production nowadays, since they are obtained from limited, and in some countries scarce, resources. In Portugal, although there are enough stone quarries to cover coarse aggregates needs for several more years, Supplies of fine aggregates are becoming scarcer, especially in the northern part of the country. On the other hand, as concrete structures' life cycle comes to an end, an urgent need emerges to establish technically and economically viable solutions for demolition debris, other than for use as road base and quarry fill. This paper presents a partial life cycle assessment (LCA) of concrete made with fine recycled concrete aggregates performed with EcoConcrete tool. EcoConcrete is a tailor-made, interactive, learning and communications tool promoted by the Joint Project Group (JPG) on the LCA of concrete, to qualify and quantify the overall environment impact of concrete products. It consists of an interactive Excel-spreadsheet in which several environmental inputs (material quantities, distances from origin to production Site, production processes) and outputs (material, energy, emissions to air, water, soil or waste) are collected in a life cycle inventory, and are then processed to determine the environmental impact (assessment) of the analysed concrete, in terms of ozone layer depletion, smog or "greenhouse" effect.

Assessment of fungal contamination in a group of Lisbon's gymnasiums with a swimming pool

The study’s main purpose was the assessment of the environmental fungal contamination, the exploration of possible associations between related environmental variables and the study of the relationship between fungal contamination of air and surfaces. A descriptive study was developed based upon air and surfaces monitoring for fungal contamination in ten indoor gymnasiums with a swimming pool located in Lisbon’s urban area. Fifty 200 litres air samples and 120 surface swabs were collected. Surfaces samples were collected before and after cleaning and disinfection and temperature and relative humidity values were registered during the collection period. Twenty five different species of fungi were identified in the air samples, being the three most commonly isolated genera the following: Cladosporium (36.6%), Penicillium (19.0%) and Aspergillus (10.2%). Thirty-seven different species of fungi were identified in the surface samples. Fusarium sp. was the most frequent genera before (19.1%) and after (17.2%) cleaning and disinfection. There was a significant association between the numbers of visitors and the fungal contamination determined in the surface samples (p<0.05). There was no significant association (p>0.05) between the contamination encountered in the air samples and the one registered in the surface samples and between the fungal contamination and the temperature or relative humidity measured on location. The data obtained enabled the assessment of the establishment’s fungal contamination and led the authors to conclude, consequently, that physical activity, which generally promotes health, can in fact be challenged by this factor.

Overview of the tuning template for radiography in Europe

HENRE II (Higher Education Network for Radiography in Europe)

Risk assessment in occupational exposure to formaldehyde: differences between anatomy and pathology laboratories and formaldehyde-resins production

Formaldehyde (CH2O), the most simple and reactive of all aldehydes, is colorless, and readily polymerizing gas at normal temperature. The most extensive use is in production of resins and has an important application as a disinfectant and preservative, reason why relevant workplace exposure may also occur in pathology and anatomy laboratories and in mortuaries. A study was carried out in Portugal, in a formaldehyde production resins factory and in 10 pathology and anatomy laboratories. It was applied a risk assessment methodology based on Queensland University proposal that permitted to perform risk assessment for each activity developed in a work station. This methodology was applied in 83 different activities developed in the laboratories and in 18 activities of the factory. Also, Micronucleus Test was performed in lymphocytes from 30 factory workers and 50 laboratories workers.

Risk assessment of exposure to multiple mycotoxins in food

Moulds may produce a diversity of toxins such as aflatoxins, ochratoxins, trichothecenes, zearalenone, fumonisins and others. Although toxicological, environmental and epidemiological studies have addressed the problem of these toxins one by one, more than one mycotoxin are found usually in the same contaminated food. Risk assessment for humans potentially exposed to multimycotoxins suffers very much from the lack of adequate food consumption data. Furthermore, for a given mycotoxin, synergism and antagonism with other mycotoxins, found in the same food commodities, are not taken into account. Aflatoxin B1 and ochratoxin A belong to the most frequently occurring mycotoxins. This has repeatedly been demonstrated, however, normally, the risk resulting from their simultaneous occurrence is not considered. A descriptive study was developed to monitor air fungal contamination in one hospital food unit.

Exposure assessment: the influence of environmental monitoring methodology

Exposure assessment is an important step of risk assessment process and has evolved more quickly than perhaps any aspect of the four-step risk paradigm (hazard identification, exposure assessment, dose-response analysis, and risk characterization). Nevertheless, some epidemiological studies have associated adverse health effects to a chemical exposure with an inadequate or absent exposure quantification. In addition to the metric used, the truly representation of exposure by measurements depends on: the strategy of sampling, random collection of measurements, and similarity between the measured and unmeasured exposure groups. Two environmental monitoring methodologies for formaldehyde occupational exposure were used to assess the influence of metric selection in exposure assessment and, consequently, in risk assessment process.

On the moroccan tsunami catalogue

A primary tool for regional tsunami hazard assessment is a reliable historical and instrumental catalogue of events. Morocco by its geographical situation, with two marine sides, stretching along the Atlantic coast to the west and along the Mediterranean coast to the north, is the country of Western Africa most exposed to the risk of tsunamis. Previous information on tsunami events affecting Morocco are included in the Iberian and/or the Mediterranean lists of tsunami events, as it is the case of the European GITEC Tsunami Catalogue, but there is a need to organize this information in a dataset and to assess the likelihood of claimed historical tsunamis in Morocco. Due to the fact that Moroccan sources are scarce, this compilation rely on historical documentation from neighbouring countries (Portugal and Spain) and so the compatibility between the new tsunami catalogue presented here and those that correspond to the same source areas is also discussed.

Revision of the portuguese catalog of tsunamis

Catastrophic tsunamis are described in historical sources for all regions around the Gulf of Cadiz, at least since 60 BC. Most of the known events are associated with moderate to large earthquakes and among them the better studied is 1 November 1755. We present here a review of the events which effects, on the coasts of the Portuguese mainland and Madeira Island, are well described in historical documents or have been measured by tide gauges since the installation of these instruments. For a few we include new relevant information for the assessment of the tsunami generation or effects, and we discard events that are included in existing compilations but are not supported by quality historical sources or instrumental records. We quote the most relevant quantitative descriptions of tsunami effects on the Portuguese coast, including in all pertinent cases a critical review of the coeval sources, to establish a homogenous event list. When available, instrumental information is presented. We complement all this information with a summary of the conclusions established by paleo-tsunami research.

Assessment of the impact of the European CO2 emissions trading scheme on the Portuguese chemical industry

This paper describes an assessment of the impact of the enforcement of the European carbon dioxide (CO2) emissions trading scheme on the Portuguese chemical industry, based on cost structure, CO2 emissions, electricity consumption and allocated allowances data from a survey to four Portuguese representative units of the chemical industry sector, and considering scenarios that allow the estimation of increases on both direct and indirect production costs. These estimated cost increases were also compared with similar data from other European Industries, found in the references and with conclusions from simulation studies. Thus, it was possible to ascertain the impact of buying extra CO2 emission permits, which could be considered as limited. It was also found that this impact is somewhat lower than the impacts for other industrial sectors.

Psychiatric assessment in transplantation

The implementation of the presumptive donor law in Brazil is expected to increase the availability of organs for transplantation. As medical management of end-stage organ dysfunction continues to improve, increasing numbers of potential transplant recipients will be available to meet this supply. There is mounting evidence that supports the involvement of skilled psychiatric practitioners in the selection of transplant candidates. Data supporting the influence of psychosocial factors on compliance and therefore medical outcomes continues to grow. The literature review allows delineating the components and rationale for comprehensive psychosocial evaluations as a component of preoperative transplantation evaluation.

Equivalência semântica da versão em português do instrumento Abuse Assessment Screen para rastrear a violência contra a mulher grávida

INTRODUÇÃO: Programas de investigação epidemiológica e de ação no âmbito da violência familiar estão em franca ascensão, requerendo instrumentos de aferição adaptados e vertidos para o português. O objetivo do estudo é avaliar a equivalência semântica entre o original em inglês e duas versões para o português do instrumento Abuse Assessment Screen (AAS) usado no rastreamento de casos de violência contra a mulher grávida e recomendar uma versão-síntese para uso corrente. MÉTODOS: O processo de avaliação de equivalência semântica envolveu quatro etapas: tradução, retradução, apreciação formal de equivalência e crítica final através de consultas com especialista na área temática. RESULTADOS: Para cada item do instrumento apresentam-se os resultados relativos às quatro etapas. O texto cobre cada passo do processo que levou à versão final. As duas versões mostraram-se bastante semelhantes, com 14 das 15 assertivas similares, embora a segunda versão tenha se mostrado mais adequada, ainda que para alguns itens tenha sido decidido juntar as duas versões ou mesmo utilizar um item oriundo da versão um. CONCLUSÃO: É importante usar mais de uma versão no processo, em várias etapas de avaliação e de crítica, e discutir a pertinência de se acrescentar uma etapa adicional de interlocução do instrumento com membros da população-alvo.

The role of discriminant analysis in the refinement of customer satisfaction assessment

OBJECTIVE: To test discriminant analysis as a method of turning the information of a routine customer satisfaction survey (CSS) into a more accurate decision-making tool. METHODS: A 7-question, 10-multiple choice, self-applied questionnaire was used to study a sample of patients seen in two outpatient care units in Valparaíso, Chile, one of primary care (n=100) and the other of secondary care (n=249). Two cutting points were considered in the dependent variable (final satisfaction score): satisfied versus unsatisfied, and very satisfied versus all others. Results were compared with empirical measures (proportion of satisfied individuals, proportion of unsatisfied individuals and size of the median). RESULTS: The response rate was very high, over 97.0% in both units. A new variable, medical attention, was revealed, as explaining satisfaction at the primary care unit. The proportion of the total variability explained by the model was very high (over 99.4%) in both units, when comparing satisfied with unsatisfied customers. In the analysis of very satisfied versus all other customers, significant relationship was identified only in the case of the primary care unit, which explained a small proportion of the variability (41.9%). CONCLUSIONS: Discriminant analysis identified relationships not revealed by the previous analysis. It provided information about the proportion of the variability explained by the model. It identified non-significant relationships suggested by empirical analysis (e.g. the case of the relation very satisfied versus others in the secondary care unit). It measured the contribution of each independent variable to the explanation of the variation of the dependent one.

Corporeidade e fisicidade : o treinamento do clown enquanto instrumental técnico e artístico na formação do ator

A presente dissertação configurou-se no estudo dos procedimentos metodológicos de treinamento e elaboração do clown: uma reflexão sobre o conceito de clown e a exposição de processos de criação e formação na prática do clown, enfocando princípios técnicos e didáticos que possam servir de orientação para o clown/aprendiz em sua formação, a partir do contato com a literatura. É possível ensinar a um ator o ofício do clown? Que princípios esse ator precisa dominar para dar início ao processo de criação e elaboração do seu clown? Do que consiste esse processo? Muitos atores ainda carregam dúvidas sobre a arte do clown, concluíram sua formação técnica e/ou acadêmica sem um mínimo contato com as teorias e práticas clownescas, ou seja, não vivenciaram um treinamento, não passaram por um processo de iniciação de elaboração e criação do clown, e não tiveram contato com práticas circenses. Despreparados e sem orientação, apostam no trabalho de “representação” de um clown, constroem “personagens clownescos”, e acabam por se tornarem pouco eficazes artisticamente, apelando para fórmulas já prontas, pré-fabricadas (piadas, estórias, personagens, gestual estereotipado). “Num primeiro olhar, poder-se-ia pensar que o clown é um personagem, e, como tal, criado por um ator que o desempenha como caricatura separada de si, submetida ao crivo e coordenação deste sujeito pensante que está por trás das ações que desenvolve (DORNELES, 2003, p. 17).” Segundo Luís Otávio Burnier (2001, p. 209): “O clown não representa, ele é. Não se trata de um personagem, ou seja, uma entidade externa a nós, mas da ampliação e dilatação dos aspectos ingênuos, puros e humanos, portanto ‘estúpidos’, do nosso próprio ser.” Muitos atores, recém formados, desejosos de aprender o ofício do clown, se matriculam em Oficinas, Workshops ou Cursos de formação. Todavia, esses contatos “provisórios” com a linguagem do clown, oferecidos como “cursos intensivos”, nem sempre garantem o crescimento pessoal, acima e além do nível profissional, ou seja, o tempo de aprendizado assegura a qualidade de um treinamento. Ainda assim, esse primeiro contato com a linguagem do clown pode representar o “pontapé inicial”, o “despertar de uma paixão” e, consequentemente, um importante acréscimo na construção desse ator. No entanto, o autoaperfeiçoamento, num treinamento específico e contínuo, seria a estratégia ideal para o entendimento do clown. Pretendemos que este material venha servir de “bússola” para nortear o ator aprendiz na busca do seu clown, e servir também de estímulo criativo e criador, para que o mesmo, a partir do contato com este estudo, se sinta em condições de se auto-gerir e dar continuidade às suas pesquisas, adaptando o que pode ser útil aos seus trabalhos pessoais. Não temos a pretenção de sugerir um “manual de trabalho” e sim, propor uma reflexão sobre o conceito de clown e expor procedimentos de criação e formação na prática do clown, enfocando princípios técnicos e didáticos que sirvam de orientação e de “trampolim” para um clown/aprendiz. Esta dissertação não pretende esgotar as reflexões acerca da temática, tampouco dar respostas ou tirar conclusões definitivas. O estudo, ora proposto, deve servir como um “primeiro olhar” para aqueles que desejarem fazer uma reflexão sobre a linguagem do clown.