Sviluppo di metodologie per l'analisi in tempo reale delle prestazioni di un motore automobilistico

Durante il periodo di dottorato, l’attività di ricerca di cui mi sono occupato è stata finalizzata allo sviluppo di metodologie per la diagnostica e l’analisi delle prestazioni di un motore automobilistico. Un primo filone di ricerca è relativo allo sviluppo di strategie per l’identificazione delle mancate combustioni (misfires) in un motore a benzina. La sperimentazione si è svolta nella sala prove della Facoltà di Ingegneria dell’Università di Bologna, nei quali è presente un motore Fiat 1.200 Fire, accoppiato ad un freno a correnti parassite, e comandato da una centralina virtuale, creata mediante un modello Simulink, ed interfacciata al motore tramite una scheda di input/output dSpace. Per quanto riguarda la campagna sperimentale, sono stati realizzati delle prove al banco in diverse condizioni di funzionamento (sia stazionarie, che transitorie), durante le quali sono stati indotti dei misfires, sia singoli che multipli. Durante tali test sono stati registrati i segnali provenienti sia dalla ruota fonica usata per il controllo motore (che, nel caso in esame, era affacciata al volano), sia da quella collegata al freno a correnti parassite. Partendo da tali segnali, ed utilizzando un modello torsionale del sistema motoregiunto-freno, è possibile ottenere una stima sia della coppia motrice erogata dal motore, sia della coppia resistente dissipata dal freno. La prontezza di risposta di tali osservatori è tale da garantirci la possibilità di effettuare una diagnosi misfire. In particolare, si è visto che l’indice meglio correlato ala mancata combustione risultaessere la differenza fra la coppia motrice e la coppia resistente; tale indice risulta inoltre essere quello più semplice da calibrare sperimentalmente, in quanto non dipende dalle caratteristiche del giunto, ma solamente dalle inerzie del sistema. Una seconda attività della quale mi sono occupato è relativa alla stima della coppia indicata in un motore diesel automobilistico. A tale scopo, è stata realizzata una campagna sperimentale presso i laboratori della Magneti Marelli Powertrain (Bologna), nella quale sono state effettuati test in molteplici punti motori, sia in condizioni di funzionamento “nominale”, sia variando artificiosamente alcuni dei fattori di controllo (quali Start of Injection, pressione nel rail e, nei punti ove è stato possibile, tasso di EGR e pressione di sovralimentazione), sia effettuando degli sbilanciamenti di combustibile fra un cilindro e l’altro. Utilizzando il solo segnale proveniente da una ruota fonica posta sul lato motore, e sfruttando un modello torsionale simile a quello utilizzato nella campagna di prove relativa alla diagnosi del misfire, è possibile correlare la componente armonica con frequenza di combustione della velocità all’armonica di pari ordine della coppia indicata; una volta stimata tale componente in frequenza, mediante un’analisi di tipo statistico, è possibile eseguire una stima della coppia indicata erogata dal motore. A completamento dell’algoritmo, sfruttando l’analisi delle altre componenti armoniche presenti nel segnale, è possibile avere una stima dello sbilanciamento di coppia fra i vari cilindri. Per la verifica dei risultati ottenuti, sono stati acquisiti i segnali di pressione provenienti da tutti e quattro i cilindri del motore in esame.

Environmental Assessment of the Agricultural Sector

One of the main problems recognized in sustainable development goals and sustainable agricultural objectives is Climate change. Farming contributes significantly to the overall Greenhouse gases (GHG) in the atmosphere, which is approximately 10-12 percent of total GHG emissions, but when taking in consideration also land-use change, including deforestation driven by agricultural expansion for food, fiber and fuel the number rises to approximately 30 percent (Smith et. al., 2007). There are two distinct methodological approaches for environmental impact assessment; Life Cycle Assessment (a bottom up approach) and Input-Output Analysis (a top down approach). The two methodologies differ significantly but there is not an immediate choice between them if the scope of the study is on a sectorial level. Instead, as an alternative, hybrid approaches which combine these two approaches have emerged. The aim of this study is to analyze in a greater detail the agricultural sectors contribution to Climate change caused by the consumption of food products. Hence, to identify the food products that have the greatest impact through their life cycle, identifying their hotspots and evaluating the mitigation possibilities for the same. At the same time evaluating methodological possibilities and models to be applied for this purpose both on a EU level and on a country level (Italy).

Tecniche di inserimento e visualizzazione di formule matematiche

La tesi enuncia e spiega i vari metodi e le varie tecnologie utilizzate dalle applicazioni web per inserire i dati e visualizzare i risultati. Per ciò che concerne i metodi vengono considerati l'input dei dati (come tastiera, fotocamera, disegni geometrici e scrittura a mano) e la loro renderizzazione (visuale, testuale, grafico, ecc). Vengono infine evidenziate le principali tecnologie relative all'input dei dati (come tastiere virtuali, OCR e inchiostro digitale) e all'output (LaTeX, MathML, MathJax, ecc).

Progetto di un sistema di collaudo per un tag RFID uwb integrato

La tesi è incentrata sul progetto di un PCB in grado di testare il corretto funzionamento del chip GRETA, un integrato dedicato, che implementa un nodo intelligente basato su harvesting RF. L'integrato implementa un sistema innovativo di comunicazione per RFID, che sfrutta la metodologia Green Tagging, per la trasmissione di sequenze RF. Vengono elaborate le diverse fasi di progettazione e di design pcb attraverso un programma di cad. Lo scopo è quello di realizzare un unico sistema perfettamente controllabile dall'utente, che attraverso i componenti messi a disposizione dalla scheda di testing, permetta di ricevere, inviare o escludere i segnali che afferiscono ai pin di Input/output del chip integrato. E' stata introdotta la possibilità di pilotare/testare separatamente le sottoparti interne al chip, con lo scopo di isolare eventuali malfunzionamenti.

Integration of computational models and experimental characterization to study internal frost damage in cementitious materials

The objective of this doctoral research is to investigate the internal frost damage due to crystallization pore pressure in porous cement-based materials by developing computational and experimental characterization tools. As an essential component of the U.S. infrastructure system, the durability of concrete has significant impact on maintenance costs. In cold climates, freeze-thaw damage is a major issue affecting the durability of concrete. The deleterious effects of the freeze-thaw cycle depend on the microscale characteristics of concrete such as the pore sizes and the pore distribution, as well as the environmental conditions. Recent theories attribute internal frost damage of concrete is caused by crystallization pore pressure in the cold environment. The pore structures have significant impact on freeze-thaw durability of cement/concrete samples. The scanning electron microscope (SEM) and transmission X-ray microscopy (TXM) techniques were applied to characterize freeze-thaw damage within pore structure. In the microscale pore system, the crystallization pressures at sub-cooling temperatures were calculated using interface energy balance with thermodynamic analysis. The multi-phase Extended Finite Element Modeling (XFEM) and bilinear Cohesive Zone Modeling (CZM) were developed to simulate the internal frost damage of heterogeneous cement-based material samples. The fracture simulation with these two techniques were validated by comparing the predicted fracture behavior with the captured damage from compact tension (CT) and single-edge notched beam (SEB) bending tests. The study applied the developed computational tools to simulate the internal frost damage caused by ice crystallization with the two dimensional (2-D) SEM and three dimensional (3-D) reconstructed SEM and TXM digital samples. The pore pressure calculated from thermodynamic analysis was input for model simulation. The 2-D and 3-D bilinear CZM predicted the crack initiation and propagation within cement paste microstructure. The favorably predicted crack paths in concrete/cement samples indicate the developed bilinear CZM techniques have the ability to capture crack nucleation and propagation in cement-based material samples with multiphase and associated interface. By comparing the computational prediction with the actual damaged samples, it also indicates that the ice crystallization pressure is the main mechanism for the internal frost damage in cementitious materials.

MARVIN: a medical research application framework based on open source software

This paper describes the open source framework MARVIN for rapid application development in the field of biomedical and clinical research. MARVIN applications consist of modules that can be plugged together in order to provide the functionality required for a specific experimental scenario. Application modules work on a common patient database that is used to store and organize medical data as well as derived data. MARVIN provides a flexible input/output system with support for many file formats including DICOM, various 2D image formats and surface mesh data. Furthermore, it implements an advanced visualization system and interfaces to a wide range of 3D tracking hardware. Since it uses only highly portable libraries, MARVIN applications run on Unix/Linux, Mac OS X and Microsoft Windows.

Focal white matter changes in spasmodic dysphonia: a combined diffusion tensor imaging and neuropathological study.

Spasmodic dysphonia is a neurological disorder characterized by involuntary spasms in the laryngeal muscles during speech production. Although the clinical symptoms are well characterized, the pathophysiology of this voice disorder is unknown. We describe here, for the first time to our knowledge, disorder-specific brain abnormalities in these patients as determined by a combined approach of diffusion tensor imaging (DTI) and postmortem histopathology. We used DTI to identify brain changes and to target those brain regions for neuropathological examination. DTI showed right-sided decrease of fractional anisotropy in the genu of the internal capsule and bilateral increase of overall water diffusivity in the white matter along the corticobulbar/corticospinal tract in 20 spasmodic dysphonia patients compared to 20 healthy subjects. In addition, water diffusivity was bilaterally increased in the lentiform nucleus, ventral thalamus and cerebellar white and grey matter in the patients. These brain changes were substantiated with focal histopathological abnormalities presented as a loss of axonal density and myelin content in the right genu of the internal capsule and clusters of mineral depositions, containing calcium, phosphorus and iron, in the parenchyma and vessel walls of the posterior limb of the internal capsule, putamen, globus pallidus and cerebellum in the postmortem brain tissue from one patient compared to three controls. The specificity of these brain abnormalities is confirmed by their localization, limited only to the corticobulbar/corticospinal tract and its main input/output structures. We also found positive correlation between the diffusivity changes and clinical symptoms of spasmodic dysphonia (r = 0.509, P = 0.037). These brain abnormalities may alter the central control of voluntary voice production and, therefore, may underlie the pathophysiology of this disorder.

Mapping material distribution in a heterogeneous sand tank by image analysis

Water flow and solute transport through soils are strongly influenced by the spatial arrangement of soil materials with different hydraulic and chemical properties. Knowing the specific or statistical arrangement of these materials is considered as a key toward improved predictions of solute transport. Our aim was to obtain two-dimensional material maps from photographs of exposed profiles. We developed a segmentation and classification procedure and applied it to the images of a very heterogeneous sand tank, which was used for a series of flow and transport experiments. The segmentation was based on thresholds of soil color, estimated from local median gray values, and of soil texture, estimated from local coefficients of variation of gray values. Important steps were the correction of inhomogeneous illumination and reflection, and the incorporation of prior knowledge in filters used to extract the image features and to smooth the results morphologically. We could check and confirm the success of our mapping by comparing the estimated with the designed sand distribution in the tank. The resulting material map was used later as input to model flow and transport through the sand tank. Similar segmentation procedures may be applied to any high-density raster data, including photographs or spectral scans of field profiles.

Internet-based exercises and mini-exams for production and operations management

The purpose of the internet-based teachware mySCM is that students of economics, informatics and industrial engineering get familiar with quantitative methods for supply chain management. Input-output-relationships of various optimization methods can be detected by sampling input values, parameters, and alternative methods for the same problem. Students can gain extra benefits by passing so-called mini-exams that motivate active learning. mySCM can be used for free, round-the-clock, and any place where access to the Internet is available.

Measuring the promise of open data: Development of the Impact Monitoring Framework

It is a challenge to measure the impact of releasing data to the public since the effects may not be directly linked to particular open data activities or substantial impact may only occur several years after publishing the data. This paper proposes a framework to assess the impact of releasing open data by applying the Social Return on Investment (SROI) approach. SROI was developed for organizations intended to generate social and environmental benefits thus fitting the purpose of most open data initiatives. We link the four steps of SROI (input, output, outcome, impact) with the 14 high-value data categories of the G8 Open Data Charter to create a matrix of open data examples, activities, and impacts in each of the data categories. This Impact Monitoring Framework helps data providers to navigate the impact space of open data laying out the conceptual basis for further research.

Shadow Profit Maximization and a Generalized Measure of Inefficiency

Determining the profit maximizing input-output bundle of a firm requires data on prices. This paper shows how endogenously determined shadow prices can be used in place of actual prices to obtain the optimal input-output bundle where the firm.s shadow profit is maximized. This approach amounts to an application of the Weak Axiom of Profit Maximization (WAPM) formulated by Varian (1984) based on shadow prices rather than actual prices. At these prices the shadow profit of a firm is zero. Thus, the maximum profit that could have been attained at some other input-output bundle is a measure of the inefficiency of the firm. Because the benchmark input-output bundle is always an observed bundle from the data, it can be determined without having to solve any elaborate programming problem. An empirical application to U.S. airlines data illustrates the proposed methodology.

Role of entorhinal cortical plasticity in spatial and contextual memory

It is well accepted that the hippocampus (HIP) is important for spatial and contextual memories, however, it is not clear if the entorhinal cortex (EC), the main input/output structure for the hippocampus, is also necessary for memory storage. Damage to the EC in humans results in memory deficits. However, animal studies report conflicting results on whether the EC is necessary for spatial and contextual memory. Memory consolidation requires gene expression and protein synthesis, mediated by signaling cascades and transcription factors. Extracellular-signal regulated kinase (ERK) cascade activity is necessary for long-term memory in several tasks, including those that test spatial and contextual memory. In this work, we explore the role of ERK-mediated plasticity in the EC on spatial and contextual memory. ^ To evaluate this role, post-training infusions of reversible pharmacological inhibitors specific for the ERK cascade that do not affect normal neuronal activity were targeted directly to the EC of awake, behaving animals. This technique provides spatial and temporal control over the inhibition of the ERK cascade without affecting performance during training or testing. Using the Morris water maze to study spatial memory, we found that ERK inhibition in the EC resulted in long-term memory deficits consistent with a loss of spatial strategy information. When animals were allowed to learn and consolidate a spatial strategy for solving the task prior to training and ERK inhibition, the deficit was alleviated. To study contextual memory, we trained animals in a cued fear-conditioning task and saw an increase in the activation of ERK in the EC 90 minutes following training. ERK inhibition in the EC over this time point, but not at an earlier time point, resulted in increased freezing to the context, but not to the tone, during a 48-hour retention test. In addition, animals froze maximally at the time the shock was given during training; similar to naïve animals receiving additional training, suggesting that ERK-mediated plasticity in the EC normally suppresses the temporal nature of the freezing response. These findings demonstrate that plasticity in the EC is necessary for both spatial and contextual memory, specifically in the retention of behavioral strategies. ^

Proceedings of the 23rd Annual Biochemical Engineering Symposium

The 23rd Annual Biochemical Engineering Symposium was held at the University of Oklahoma on April 17, 1993. The objectives of the symposium were to provide 1) a forum for informal discussion of biochemical engineering research being carried at the participating universities and 2) an opportunity for students to present and publish their work. Thirteen papers presented at the symposium are included in the proceedings. Because final publication usually takes place in refereed journals, the articles included here are typically brief and often cover work in progress. The program of the symposium and a list of participants are included in the proceedings. ContentsA Low-Cost Bioreactor Strategy for RNA Synthesis, H. Anthony Marble, Eleni Chrisikos, and Robert H. Davis Development of a CELSS Bioreactor: Oxygen Transfer and Micromixing in Parabolic Flight, P.E. Villeneuve, K.S. Wenger, B.G. Thompson, T. Kedar, and E.H. Dunlop Scale-up of Dexter Murine Bone Marrow Cultures Utilizing a Three-Dimensional Fiberglass Support Matrix, John G. Highfill, Paul Todd, Steve Haley, and Dhinaker Kompala Modeling and Estimation of States of Recombinant Fermentations Using Nonlinear Input/Output Models, Vicotr M. Saucedo and M. Nazmul Karim Deadent Microfiltration of Bovine Serum Albumin Suspension Through Yeast Cake Layers and Assymetric Polymeric Membranes, Naveen Arora and Robert H. Davis Monitoring the Fate of Toluene and Phenol in the Rhizosphere, N. Muralidharan, Lawrence C. Davis, and Larry E. Erickson Hydrodynamic Motions Associated with Bubble Coalescence and Breakup, T.Y. Yiin, L.A. Glasgow, and L.E. Erickson Expression and Purification of a-Human Atrial Natriuretic Peptide in Escherichia coli by Fusion with L-Asparaginase, Nien-Tung Ma and Roger G. Harrison High Pressure Crystallization of Proteins, Mungara V. Saikumar, Charles E. Glatz, and Maurice A. Larson Structure/Function Relationships in the Catalytic and Starch Binding Domains of Glucoamylase, Pedro M. Coutinho, Clark Ford, Peter J. Reilly Cellular Responses of Insect Cell Spodoptera frugiperda to Environmental Stresses, Paul Yeh, Grace Y. Sun, Gary A. Weisman, Rakesh Bajpai A Novel Approach to Understanding the Antimicrobial Activity of Peptides, Naveen Pathak, Marie-Helene Janna, Gael Ruche, David McCarthy, and Roger Harrison Mass Transfer in the Bioremediation of Soils Contaminated with Trapped Non-Aqueous Phase Liquids, Xiaoqing Yang, Larry E. Jacobson, and L.T. Fan

Infiltración y erosión

Esta monografía se enmarca en el manejo de los recursos hídricos en grandes redes de riego. En ella se describe el caso del río Mendoza, en la provincia homónima, el que fuera regulado en el año 2002. Este río nace en la Cordillera de los Andes, y presenta un importante arrastre de sólidos en suspensión, los que actualmente son retenidos en gran medida por el embalse Potrerillos. Las “aguas claras" que se erogan del embalse producen problemas erosivos, los que a su vez estarían ocasionando una mayor infiltración en los canales, y con ello un incremento en la recarga de acuíferos en ciertas zonas, así como problemas derivados del ascenso de la freática en otras. Se citan procesos ocurridos en otros distritos de riego frente a la regulación de los ríos, para concluir que el del río Mendoza es un caso susceptible de sufrir ciertos per-juicios, ya señalados en la Manifestación General de Impacto Ambiental del embalse Potrerillos, los que actualmente se están presentando en la red de riego. A partir de los estudios de sedimentología en el río Mendoza, se hace un análisis técnico de los fenómenos asociados al cambio de las características físicas del agua. Luego se describen los procesos erosivos, de acuerdo con la hidráulica clásica. Se define la Eficiencia de conducción (Ec), la infiltración en canales y su importancia en distintos distritos de riego, para luego mencionar los estudios realizados en el área del río Mendoza. Se analiza el desarrollo espacial que ha tenido el oasis, la escasa programación que tuvo su traza y la antigüedad de la misma. La descripción de los suelos permite concluir acerca de la importancia de su estructura y del papel que juegan las porciones finas, aún en minoría, que integran las distintas clases texturales con respecto a la Ec. Se describen los criterios con que se distribuye el agua en Mendoza, analizándose los caudales distribuidos actualmente, para relacionarlos con los niveles freáticos. Se mencionan además distintas acciones encaradas por la provincia para mitigar los efectos de las aguas claras. El análisis de los métodos utilizados para medir la Ec, permite apreciar el estado de la ciencia al respecto. Un análisis de las ventajas y de las desventajas de los distintos métodos, y de los resultados que con ellos se obtienen, permite concluir que el método de entradas y salidas es el que mejor se adapta en Mendoza, incluyendo además aspectos metodológicos de la medición. También se concluye en que la Ec. está insuficientemente evaluada; las fracciones finas de los suelos en muchos casos gravitan más que la textura frente a la Ec; por ello, se considera que el estudio de la Ec en las distintas áreas de manejo es necesario para entender los procesos de revenición y recarga de acuíferos, y que las pérdidas administrativas pueden gravitar más que la Ec. Se recomienda continuar con los trabajos de evaluación de Ec, al ser necesarios para todas las actividades en la cuenca; se desaconseja en este río el ajuste de modelos de predicción de Ec; las características de los suelos obligan a interpretar y aplicar con criterio la bibliografía internacional, pero aún así no se pueden hacer generalizaciones acerca de de la Ec en Mendoza.

Analysis and visualization of the dynamics of research groups in terms of projects and co-authored publications : A case study of library and information science in Argentina

Objective: The present study offers a novel methodological contribution to the study of the configuration and dynamics of research groups, through a comparative perspective of the projects funded (inputs) and publication co-authorships (output). Method: A combination of bibliometric techniques and social network analysis was applied to a case study: the Departmento de Bibliotecología (DHUBI), Universidad Nacional de La Plata, Argentina, for the period 2000-2009. The results were interpreted statistically and staff members of the department, were interviewed. Results: The method makes it possible to distinguish groups, identify their members and reflect group make-up through an analytical strategy that involves the categorization of actors and the interdisciplinary and national or international projection of the networks that they configure. The integration of these two aspects (input and output) at different points in time over the analyzed period leads to inferences about group profiles and the roles of actors. Conclusions: The methodology presented is conducive to micro-level interpretations in a given area of study, regarding individual researchers or research groups. Because the comparative input-output analysis broadens the base of information and makes it possible to follow up, over time, individual and group trends, it may prove very useful for the management, promotion and evaluation of science