Proceedings of the 2005 Australian Software Engineering Conference

Established in 1986, ASWEC is the premier technical meeting for the Australian software engineering community, and attracts a significant number of international participants. The major goal of the conference is to provide a forum for exchanging experience and new research results in software engineering. To increase the industry participation at ASWEC, we organized two separate paper tracks, which we have called Research Papers and Industry Experience Reports. These paper tracks had separate deadlines, separate program committees, separate review procedures, and separate proceedings. The Research Papers appear in these proceedings and the Industry Experience Reports will appear on a CD-Rom that will be distributed at the conference. The Research Papers track for ASWEC 2005 includes submissions from Australia and across the world. This year we received 79 submissions from 13 countries: 48 from Australia, 7 from New Zealand, 11 from Asia, 9 from Europe, and 2 each from North and South America. All papers were fully refereed by three Program Committee members. We accepted 34 papers to be presented at the conference. We are grateful to all authors who contributed to ASWEC.

An expert system for the development of a health and safety policy/risk assessment in the plastics industry

Health and safety policies may be regarded as the cornerstone for positive prevention of occupational accidents and diseases. The Health and Safety at Work, etc Act 1974 makes it a legal duty for employers to prepare and revise a written statement of a general policy with respect to the health and safety at work of employees as well as the organisation and arrangements for carrying out that policy. Despite their importance and the legal equipment to prepare them, health and safety policies have been found, in a large number of plastics processing companies (particularly small companies), to be poorly prepared, inadequately implemented and monitored. An important cause of these inadequacies is the lack of necessary health and safety knowledge and expertise to prepare, implement and monitor policies. One possible way of remedying this problem is to investigate the feasibility of using computers to develop expert system programs to simulate the health and safety (HS) experts' task of preparing the policies and assisting companies implement and monitor them. Such programs use artificial intelligence (AI) techniques to solve this sort of problems which are heuristic in nature and require symbolic reasoning. Expert systems have been used successfully in a variety of fields such as medicine and engineering. An important phase in the feasibility of development of such systems is the engineering of knowledge which consists of identifying the knowledge required, eliciting, structuring and representing it in an appropriate computer programming language.

Decompression illness and its regulation in contemporary UK tunnelling : an engineering perspective:an engineering perspective

This thesis records the findings of a retrospective study of decompression illness (DCI) in the UK compressed air tunnelling industry since the mid-1980s. The thesis describes how the study arose, its scope and objectives, along with an overview of tunnelling and shaft-sinking. The development of compressed air working techniques is reviewed along with a description of decompression practice and DCI, and an outline of relevant legislation and guidance. The acquisition and manipulation of data to form a number of databases and spreadsheets on which the analysis was performed is discussed. That analysis examined measures of DCI incidence and quantified that incidence using these measures. Also considered is the variation in tolerance and susceptibility to DCI in the workforce, and the phenomenon of acclimatisation. An examination of the extent to which men worked on multiple contracts and the variation in their susceptibility to DCI on these contracts is included. Options are then considered for reducing the incidence of DCI. The first retained air-only decompression through the application of restrictions on exposure. The second related to the use of oxygen decompression. Finally the adequacy of the existing Regulations and Guidance is considered and recommendations made for possible changes to them, arising from the study. The main conclusions are that a number of measures of DCI incidence were identified, some more appropriate than others and that the incidence of DCI when so measured was high, disproportionately so in shift workers. No reasonably practicable restrictions on exposure were identified which would have allowed the retention of air-only decompression. Oxygen decompression looked promising but had yet to be used sufficiently extensively to generate enough data for analysis. Recommendations included one that an alternative technique for monitoring the effectiveness of decompression should be developed. The thesis ends with recommendations for further research.

Microcomputers for civil engineering consultancy in developing countries

The civil engineering industry generally regards new methods and technology with a high amount of scepticism, preferring to use traditional and trusted methods. During the 1980s competition for civil engineering consultancy work in the world has become fierce. Halcrow recognised the need to maintain and improve their competitive edge over other consultants. The use of new technology in the form of microcomputers was seen to be one method to maintain and improve their repuation in the world. This thesis examines the role of microcomputers in civil engineering consultancy with particular reference to overseas projects. The involvement of civil engineers with computers, both past and present, has been investigated and a survey of the use of microcomputers by consultancies was carried out, the results are presented and analysed. A resume of the state-of-the-art of microcomputer technology was made. Various case studies were carried out in order to examine the feasibility of using microcomputers on overseas projects. One case study involved the examination of two projects in Bangladesh and is used to illustrate the requirements and problems encountered in such situations. Two programming applications were undertaken, a dynamic programming model of a single site reservoir and the simulation of the Bangladesh gas grid system. A cost-benefit analysis of a water resources project using microcomputers in the Aguan Valley, Honduras was carried out. Although the initial cost of microcomputers is often small, the overall costs can prove to be very high and are likely to exceed the costs of traditional computer methods. A planned approach for the use of microcomputers is essential in order to reap the expected benefits and recommendations for the implementation of such an approach are presented.

Rationalisation and improvement of a company's engineering design procedures

There is a great deal of literature about the initial stages of innovative design. This is the process whereby a completely new product is conceived, invented and developed. In industry, however, the continuing success of a company is more often achieved by improving or developing existing designs to maintain their marketability. Unfortunately, this process of design by evolution is less well documented. This thesis reports the way in which this process was improved for the sponsoring company. The improvements were achieved by implementing a new form of computer aided design (C.A.D.) system. The advent of this system enabled the company to both shorten the design and development time and also to review the principles underlying the existing design procedures. C.A.D. was a new venture for the company and care had to be taken to ensure that the new procedures were compatible with the existing design office environment. In particular, they had to be acceptable to the design office staff. The C.A.D. system produced guides the designer from the draft specification to the first prototype layout. The computer presents the consequences of the designer's decisions clearly and fully, often by producing charts and sketches. The C.A.D. system and the necessary peripheral facilities were implemented, monitored and maintained. The system structure was left sufficiently flexible for maintenance to be undertaken quickly and effectively. The problems encountered during implementation are well documented in this thesis.

State-of-the-art of ‘Lean’ in the aviation maintenance, repair, and overhaul industry

The increasing need for maintenance, repair, and overhaul (MRO) organizations to meet customers' demands in quality and reduced lead times is key to its survival within the aviation industry. Furthermore, with the unpredictability in the global market and difficulties with forecasting characteristic of the MRO industry there is an increased need for the reevaluation of the operation models of organizations within this sector. However, severe economic turmoil and ever-increasing global competition introduce the opportunity for the adoption of a resilient, tried, and tested business operation model such as 'Lean'. In order to understand this concept, its long-term viability, and its application within the aerospace MRO sector fully, this paper presents the state-of-the-art in terms of the adoption of Lean within the MRO industry by carrying out a systematic review of the literature. This paper establishes the common perception of Lean by the MRO industry and the measurable progress that has been made on the subject. Some issues and challenges are also highlighted including the misconceptions that arise from the direct transference of the perception of Lean from other industrial sectors into the aerospace MRO industry. The 'enablers and inhibitors' of Lean within the aviation industry are also discussed. This paper exposes the scarcity of the literature and the general lagging behind of the industry to the adoption of the Lean paradigm and thus highlights areas where further research is required. © 2011 Authors.

Student input in the development of a marking scheme for improved engineering logbooks

Engineers logbooks are an important part of the CDIO process, as a prequel to the logooks they will be expected to keep when in industry. Previously however, students logbooks were insufficient and students did not appear to appreciate the importance of the logbooks or how they would be assessed. In an attempt to improve the students understanding and quality of logbooks, a group of ~100 1st year CDIO students were asked to collaboratively develop a marking matrix with the tutors. The anticipated outcome was that students would have more ownership in, and a deeper understanding of, the logbook and what is expected from the student during assessment. A revised marking matrix was developed in class and a short questionnaire was implemented on delivery of the adapted matrix to gauge the students response to the process. Marks from the logbooks were collected twice during teaching period one and two and compared to marks from previous years. This poster will deliver the methodology and outcomes for this venture.

Total productive maintenance implementation in the newspaper printing industry:an action research approach

The objective of Total Productive Maintenance (TPM) is to maximise plant and equipment effectiveness, to create a sense of ownership for operators, and promote continuous improvement through small group activities involving production, engineering and maintenance personnel. This paper describes and analyses a case study of TPM implementation at a newspaper printing house in Singapore. However, rather than adopting more conventional implementation methods such as employing consultants or through a project using external training, a unique approach was adopted based on Action Research using a spiral of cycles of planning, acting observing and reflecting. An Action Research team of company personnel was specially formed to undertake the necessary fieldwork. The team subsequently assisted with administering the resulting action plan. The main sources of maintenance and operational data were from interviews with shop floor workers, participative observation and reviews conducted with members of the team. Content analysis using appropriate statistical techniques was used to test the significance of changes in performance between the start and completion of the TPM programme. The paper identifies the characteristics associated with the Action Research method when used to implement TPM and discusses the applicability of the approach in related industries and processes.

Sustainable purchasing practices:an investigation into current industry awareness and practice

This research study illustrates the importance of sustainable purchasing practices for organizations in the U.S. distribution industry and answers several important questions: what is the current awareness of U.S. organizations regarding sustainable purchasing practices; to what extent are U.S. organizations evaluating, selecting, and retaining suppliers based upon sustainable purchasing practices; and to what extent are sustainable purchasing practices being implemented by the U.S. organizations under study? With an ever increasing global economy, is it critically important for organizations to put in place sustainability practices; the biggest impact organizations can make is often in an organization’s purchasing department. The researcher begins by explaining the reasoning for conducting the research, and then builds the readers’ understanding of sustainability in a supply chain environment. It then moves to the subject of how sustainable purchasing can be an advantageous method for bringing about “triple bottom line” savings to an organization. This section is followed by the researcher’s methodology and ending results for a survey conducted to examine the current awareness and implementation of sustainable purchasing practices among U.S. plumbing, heating, cooling and piping (PHCP) distribution firms who participated in the study.

Project management system for a concurrent engineering framework

Completing projects faster than normal is always a challenge as it often demands many paradigm shifts. Globalization opportunities and competition from private sectors and multinationals are forcing the management of public sector organizations in India's petroleum industry to take various aggressive strategies to maintain profitability. These projects are required to be completed sooner than with a typical schedule to remain competitive, get faster return on investment and give longer project life.

Enhanced process verification through re-engineering the manufacturing procedure

In today’s modern manufacturing industry there is an increasing need to improve internal processes to meet diverse client needs. Process re-engineering is an important activity that is well understood by industry but its rate of application within small to medium size enterprises (SME) is less developed. Business pressures shift the focus of SMEs toward winning new projects and contracts rather than developing long-term, sustainable manufacturing processes. Variations in manufacturing processes are inevitable, but the amount of non-conformity often exceeds the acceptable levels. This paper is focused on the re-engineering of the manufacturing and verification procedure for discrete parts production with the aim of enhancing process control and product verification. The ideologies of the ‘Push’ and ‘Pull’ approaches to manufacturing are useful in the context of process re-engineering for data improvement. Currently information is pulled from the market and prominent customers, and manufacturing companies always try to make the right product, by following customer procedures that attempt to verify against specifications. This approach can result in significant quality control challenges. The aim of this paper is to highlight the importance of process re-engineering in product verification in SMEs. Leadership, culture, ownership and process management are among the main attributes required for the successful deployment of process re-engineering. This paper presents the findings from a case study showcasing the application of a modified re-engingeering method for the manufacturing and verification process. The findings from the case study indicate there are several advantages to implementing the re-engineering method outlined in this paper.

A micro industry with closed energy and water cycles for sustainable rural development

Sustainable development requires combining economic viability with energy and environment conservation and ensuring social benefits. It is conceptualized that for designing a micro industry for sustainable rural industrialization, all these aspects should be integrated right up front. The concept includes; (a) utilization of local produce for value addition in a cluster of villages and enhancing income of the target population; (b) use of renewable energy and total utilization of energy generated by co and trigeneration (combining electric power production with heat utilization for heating and cooling); (c) conservation of water and complete recycling of effluents; (d) total utilization of all wastes for achieving closure towards a zero waste system. Enhanced economic viability and sustainability is achieved by integration of appropriate technologies into the industrial complex. To prove the concept, a model Micro Industrial Complex (MIC) has been set up in a semi arid desert region in Rajasthan, India at village Malunga in Jodhpur district. A biomass powered boiler and steam turbine system is used to generate 100-200 KVA of electric power and high energy steam for heating and cooling processes downstream. The unique feature of the equipment is a 100-150 kW back-pressure steam turbine, utilizing 3-4 tph (tonnes per hour) steam, developed by M/s IB Turbo. The biomass boiler raises steam at about 20 barg 3 tph, which is passed through a turbine to yield about 150 kW of electrical power. The steam let out at a back pressure of 1-3 barg has high exergy and this is passed on as thermal energy (about 2 MW), for use in various applications depending on the local produce and resources. The biomass fuel requirement for the boiler is 0.5-0.75 tph depending on its calorific value. In the current model, the electricity produced is used for running an oil expeller to extract castor oil and the castor cake is used as fuel in the boiler. The steam is used in a Multi Effect Distillation (MED) unit for drinking water production and in a Vapour Absorption Machine (VAM) for cooling, for banana ripening application. Additional steam is available for extraction of herbs such as mint and processing local vegetables. In this paper, we discuss the financial and economic viability of the system and show how the energy, water and materials are completely recycled and how the benefits are directed to the weaker sections of the community.