Optimization of analytical methods for the assessment of the quality of fats and oils used in continuous deep fat frying

La aplicabilidad, repetibilidad y capacidad de diferentes métodos de análisis para discriminar muestras de aceites con diferentes grados de oxidación fueron evaluadas mediante aceites recogidos en procesos de fritura en continuo en varias empresas españolas. El objetivo de este trabajo fue encontrar métodos complementarios a la determinación del índice de acidez para el control de calidad rutinario de los aceites de fritura empleados en estas empresas. La optimización de la determinación de la constante dieléctrica conllevó una clara mejora de la variabilidad. No obstante, excepto en el caso del índice del ATB, el resto de métodos ensayados mostraron una menor variabilidad. La determinación del índice del ATB fue descartada ya que su sensibilidad fue insuficiente para discriminar entre aceites con diferente grado de oxidación. Los diferentes parámetros de alteración determinados en los aceites de fritura mostraron correlaciones significativas entre el índice de acidez y varios parámetros de oxidación diferentes, como la constante dieléctrica, el índice de p-anisidina, la absorción al ultravioleta y el contenido en polímeros de los triacilgliceroles. El índice de acidez solo evalúa la alteración hidrolítica, por lo que estos parámetros aportan información complementaria al evaluar la alteración termooxidativa.

Objective assessment of image quality in conventional and digital mammography taking into account dynamic range.

The goal of this work is to develop a method to objectively compare the performance of a digital and a screen-film mammography system in terms of image quality. The method takes into account the dynamic range of the image detector, the detection of high and low contrast structures, the visualisation of the images and the observer response. A test object, designed to represent a compressed breast, was constructed from various tissue equivalent materials ranging from purely adipose to purely glandular composition. Different areas within the test object permitted the evaluation of low and high contrast detection, spatial resolution and image noise. All the images (digital and conventional) were captured using a CCD camera to include the visualisation process in the image quality assessment. A mathematical model observer (non-prewhitening matched filter), that calculates the detectability of high and low contrast structures using spatial resolution, noise and contrast, was used to compare the two technologies. Our results show that for a given patient dose, the detection of high and low contrast structures is significantly better for the digital system than for the conventional screen-film system studied. The method of using a test object with a large tissue composition range combined with a camera to compare conventional and digital imaging modalities can be applied to other radiological imaging techniques. In particular it could be used to optimise the process of radiographic reading of soft copy images.

Elaboración de un video sobre calidad, seguridad y medio ambiente en la Unidad de Laboratorios Docentes (ULD) de la Facultad de Farmacia de la Universidad de Barcelona

La Unidad de Laboratorios Docentes (ULD) de la Facultad de Farmacia (UB) ha implantado un sistema de gestión de la calidad (SGC) que permite transmitir al estudiante una formación adicional con el objetivo de mejorar sus competencias transversales (siguiendo las directrices del Espacio Europeo de Educación Superior, EEES). Además, en el curso académico 06-07, se instauraron las Buenas Prácticas Ambientales (BPAL) para disponer de un sistema de gestión que incorporase los criterios de calidad, medioambiente y seguridad (sistema de gestión integrada, SGI). Durante el presente curso académico se ha procedido a la grabación y edición de un video sobre calidad, seguridad y medioambiente en la ULD con el objetivo de mejorar la formación transversal de los estudiantes facilitando la integración de los conocimientos y habilidades profesionales. De esta forma, al salir del entorno universitario, los licenciados y graduados de la Facultad de Farmacia dispondrán de un valor añadido en su formación, mejorando así sus competencias para el desarrollo de su futura profesión. En el video se muestra la manera de trabajar correctamente según las normas de calidad, seguridad y medioambiente recogidas además en un tríptico que se entrega a los estudiantes al acceder por primera vez a un laboratorio de prácticas. El video se difundirá a través de la página web de la ULD, de la videoteca de la UB, del canal You Tube Canal UB, así como de las asignaturas que lo soliciten (sirviendo de soporte para el personal docente).

Elaboración de un video sobre calidad, seguridad y medio ambiente en la Unidad de Laboratorios Docentes (ULD) de la Facultad de Farmacia de la Universidad de Barcelona

La Unidad de Laboratorios Docentes (ULD) de la Facultad de Farmacia (UB) ha implantado un sistema de gestión de la calidad (SGC) que permite transmitir al estudiante una formación adicional con el objetivo de mejorar sus competencias transversales (siguiendo las directrices del Espacio Europeo de Educación Superior, EEES). Además, en el curso académico 06-07, se instauraron las Buenas Prácticas Ambientales (BPAL) para disponer de un sistema de gestión que incorporase los criterios de calidad, medioambiente y seguridad (sistema de gestión integrada, SGI). Durante el presente curso académico se ha procedido a la grabación y edición de un video sobre calidad, seguridad y medioambiente en la ULD con el objetivo de mejorar la formación transversal de los estudiantes facilitando la integración de los conocimientos y habilidades profesionales. De esta forma, al salir del entorno universitario, los licenciados y graduados de la Facultad de Farmacia dispondrán de un valor añadido en su formación, mejorando así sus competencias para el desarrollo de su futura profesión. En el video se muestra la manera de trabajar correctamente según las normas de calidad, seguridad y medioambiente recogidas además en un tríptico que se entrega a los estudiantes al acceder por primera vez a un laboratorio de prácticas. El video se difundirá a través de la página web de la ULD, de la videoteca de la UB, del canal You Tube Canal UB, así como de las asignaturas que lo soliciten (sirviendo de soporte para el personal docente).

Embankment Quality Phase II Final Report, TR-401, 1999

Phase II research included the following: (1) develop and evaluate alternative soil design and embankment construction specifications based on soil type, moisture, density, stability, and compaction process; (2) assess various quality control and acceptance procedures with a variety of in-situ test methods including the Dual-mass Dynamic Cone Penetrometer (DCP); and (3) develop and design rapid field soil identification methods. At the start of the research, soils were divided into cohesive and cohesionless soil types, with each category being addressed separately. Cohesionless soils were designated as having less than 36% fines content (material passing the No. 200 sieve) and cohesive soils as having greater than 36% fines content. Subsequently, soil categories were refined based not only on fines content but soil plasticity as well. Research activities included observations of fill placement, in-place moisture and density testing, and dual-mass DCP index testing on several highway embankment projects throughout Iowa. Experiments involving rubber-tired and vibratory compaction, lift thickness changes, and disk aeration were carried out for the full range of Iowa soils. By testing for soil stability the DCP was found to be a valuable field tool for quality control, whereby shortcomings from density testing (density gradients) were avoided. Furthermore, critical DCP index values were established based on soil type and compaction moisture content.

Determinar la causa de las marcas o quebrados que aparecen en el cuello de la camisa

Dictamen

Automatic quality assessment in structural brain magnetic resonance imaging

MRI has evolved into an important diagnostic technique in medical imaging. However, reliability of the derived diagnosis can be degraded by artifacts, which challenge both radiologists and automatic computer-aided diagnosis. This work proposes a fully-automatic method for measuring image quality of three-dimensional (3D) structural MRI. Quality measures are derived by analyzing the air background of magnitude images and are capable of detecting image degradation from several sources, including bulk motion, residual magnetization from incomplete spoiling, blurring, and ghosting. The method has been validated on 749 3D T(1)-weighted 1.5T and 3T head scans acquired at 36 Alzheimer's Disease Neuroimaging Initiative (ADNI) study sites operating with various software and hardware combinations. Results are compared against qualitative grades assigned by the ADNI quality control center (taken as the reference standard). The derived quality indices are independent of the MRI system used and agree with the reference standard quality ratings with high sensitivity and specificity (>85%). The proposed procedures for quality assessment could be of great value for both research and routine clinical imaging. It could greatly improve workflow through its ability to rule out the need for a repeat scan while the patient is still in the magnet bore.

Image quality assessment in digital mammography: part II. NPWE as a validated alternative for contrast detail analysis.

Assessment of image quality for digital x-ray mammography systems used in European screening programs relies mainly on contrast-detail CDMAM phantom scoring and requires the acquisition and analysis of many images in order to reduce variability in threshold detectability. Part II of this study proposes an alternative method based on the detectability index (d') calculated for a non-prewhitened model observer with an eye filter (NPWE). The detectability index was calculated from the normalized noise power spectrum and image contrast, both measured from an image of a 5 cm poly(methyl methacrylate) phantom containing a 0.2 mm thick aluminium square, and the pre-sampling modulation transfer function. This was performed as a function of air kerma at the detector for 11 different digital mammography systems. These calculated d' values were compared against threshold gold thickness (T) results measured with the CDMAM test object and against derived theoretical relationships. A simple relationship was found between T and d', as a function of detector air kerma; a linear relationship was found between d' and contrast-to-noise ratio. The values of threshold thickness used to specify acceptable performance in the European Guidelines for 0.10 and 0.25 mm diameter discs were equivalent to threshold calculated detectability indices of 1.05 and 6.30, respectively. The NPWE method is a validated alternative to CDMAM scoring for use in the image quality specification, quality control and optimization of digital x-ray systems for screening mammography.

Early detection of lung cancer: a statement from an expert panel of the Swiss university hospitals on lung cancer screening.

The discussion about setting up a program for lung cancer screening was launched with the publication of the results of the National Lung Screening Trial, which suggested reduced mortality in high-risk subjects undergoing CT screening. However, important questions about the benefit-harm balance and the details of a screening program and its cost-effectiveness remain unanswered. A panel of specialists in chest radiology, respiratory medicine, epidemiology, and thoracic surgery representing all Swiss university hospitals prepared this joint statement following several meetings. The panel argues that premature and uncontrolled introduction of a lung cancer screening program may cause substantial harm that may remain undetected without rigorous quality control. This position paper focuses on the requirements of running such a program with the objective of harmonizing efforts across the involved specialties and institutions and defining quality standards. The underlying statement includes information on current evidence for a reduction in mortality with lung cancer screening and the potential epidemiologic implications of such a program in Switzerland. Furthermore, requirements for lung cancer screening centers are defined, and recommendations for both the CT technique and the algorithm for lung nodule assessment are provided. In addition, related issues such as patient management, registry, and funding are addressed. Based on the current state of the knowledge, the panel concludes that lung cancer screening in Switzerland should be undertaken exclusively within a national observational study in order to provide answers to several critical questions before considering broad population-based screening for lung cancer.

Interplay of oxidative, nitrosative/nitrative stress, inflammation, cell death and autophagy in diabetic cardiomyopathy.

Diabetes is a recognized risk factor for cardiovascular diseases and heart failure. Diabetic cardiovascular dysfunction also underscores the development of diabetic retinopathy, nephropathy and neuropathy. Despite the broad availability of antidiabetic therapy, glycemic control still remains a major challenge in the management of diabetic patients. Hyperglycemia triggers formation of advanced glycosylation end products (AGEs), activates protein kinase C, enhances polyol pathway, glucose autoxidation, which coupled with elevated levels of free fatty acids, and leptin have been implicated in increased generation of superoxide anion by mitochondria, NADPH oxidases and xanthine oxidoreductase in diabetic vasculature and myocardium. Superoxide anion interacts with nitric oxide forming the potent toxin peroxynitrite via diffusion limited reaction, which in concert with other oxidants triggers activation of stress kinases, endoplasmic reticulum stress, mitochondrial and poly(ADP-ribose) polymerase 1-dependent cell death, dysregulates autophagy/mitophagy, inactivates key proteins involved in myocardial calcium handling/contractility and antioxidant defense, activates matrix metalloproteinases and redox-dependent pro-inflammatory transcription factors (e.g. nuclear factor kappaB) promoting inflammation, AGEs formation, eventually culminating in myocardial dysfunction, remodeling and heart failure. Understanding the complex interplay of oxidative/nitrosative stress with pro-inflammatory, metabolic and cell death pathways is critical to devise novel targeted therapies for diabetic cardiomyopathy, which will be overviewed in this brief synopsis. This article is part of a Special Issue entitled: Autophagy and protein quality control in cardiometabolic diseases.

Fluorescence flow cytometer to determine urine particle reference intervals in doping control samples.

Background: Urine is still the matrix of choice to fight against doping, because it can be collected non-invasively during anti-doping tests. Most of the World Anti-Doping Agency's accredited laboratories have more than 20 years experience in analyzing this biological fluid and the majority of the compounds listed in the 2010 Prohibited List - International Standard are eliminated through the urinary apparatus. Storing and transporting urine samples for doping analyses does not include a specific protocol to prevent microbial and thermal degradation. The use of a rapid and reliable screening method could enable determine reference intervals for urine specimens in doping control samples and evaluate notably the prevalence of microbial contamination known to be responsible for the degradation of chemical substances in urine.Methods: The Sysmex(R) UF-500i is a recent urine flow cytometer analyzer capable of quantifying BACT and other urinary particles such as RBC, WBC, EC, DEBRIS, CAST, PATH. CAST, YLC, SRC as well as measuring urine conductivity. To determine urine anti-doping reference intervals, 501 samples received in our laboratory over a period of two months were submitted to an immediate examination. All samples were collected and then transported at room temperature. Analysis of variance was performed to test the effects of factors such as gender, test type [in-competition, out-of-competition] and delivery time.Results: The data obtained showed that most of the urine samples were highly contaminated with bacteria. The other urine particles were also very different according to the factors.Conclusions: The Sysmex(R) UF-500i was capable of providing a snapshot of urine particles present in the samples at the time of the delivery to the laboratory. These particles, BACT in particular, gave a good idea of the possible microbial degradation which had and/or could have occurred in the sample. This information could be used as the first quality control set up in WADA (World Anti-Doping Agency) accredited laboratories to determine if steroid profiles, endogenous and prohibited substances have possibly been altered. (C) 2011 Elsevier Ireland Ltd. All rights reserved.

Legal Issues for FOSS-based Supply Chain Management ¿ Black Duck Software

Open source is typically outside of normal commercial software procurement processes.The Challenges.Increasingly diverse and distributed set of development resources.Little/no visibility into the origins of the software.Supply Chain Comparison: Hardware vs Software.Open source has revolutionized the mobile and device landscape, other industries will follow.Supply chain management techniques from hardware are useful for managing software.SPDX A standard format for communicating a software Bill of Materials across the supply chain.Effective management and control requires training, tools, processes and standards.

Experiencia de 10 años de innovación docente en la Unidad de Laboratorios Docentes (ULD) de la Facultad de Farmacia

[spa]En este trabajo se describe la experiencia de innovación docente desarrollada en la ULD a lo largo de los 10 años de existencia. Se comentan algunos de los indicadores del sistema de gestión de la calidad así como su evolución y los resultados más representativos obtenidos en su alimentación. El objetivo de este proyecto es introducir aspectos de la gestión de la calidad, seguridad, salud y medio ambiente en la formación de los estudiantes para que los apliquen a lo largo del desarrollo de las prácticas. De esta forma, podrán adquirir una formación transversal adicional que difícilmente le será transmitida a través de las diferentes asignaturas de la licenciatura y que mejorará sus competencias y facilitará su acceso al ámbito laboral. También se pretende contribuir en la mejora del funcionamiento y las infraestructuras de los laboratorios de prácticas de la facultad. [eng] In the following work it is summarized the innovative experience carried out by the ULD besides showing the results obtained from the different indicators that allow to evaluate the efficiency of the quality management system. The aim is to improve the management of the practical teaching by introducing aspects of quality management, safety, health and environment in the formation of the students. In such a way, they would be able to acquire a transverse additional formation that difficultly would be transmitted across the different subjects of the degree and that would improve their competitions when acceding to the working world.

Experiencia de 10 años de innovación docente en la Unidad de Laboratorios Docentes (ULD) de la Facultad de Farmacia

[spa]En este trabajo se describe la experiencia de innovación docente desarrollada en la ULD a lo largo de los 10 años de existencia. Se comentan algunos de los indicadores del sistema de gestión de la calidad así como su evolución y los resultados más representativos obtenidos en su alimentación. El objetivo de este proyecto es introducir aspectos de la gestión de la calidad, seguridad, salud y medio ambiente en la formación de los estudiantes para que los apliquen a lo largo del desarrollo de las prácticas. De esta forma, podrán adquirir una formación transversal adicional que difícilmente le será transmitida a través de las diferentes asignaturas de la licenciatura y que mejorará sus competencias y facilitará su acceso al ámbito laboral. También se pretende contribuir en la mejora del funcionamiento y las infraestructuras de los laboratorios de prácticas de la facultad. [eng] In the following work it is summarized the innovative experience carried out by the ULD besides showing the results obtained from the different indicators that allow to evaluate the efficiency of the quality management system. The aim is to improve the management of the practical teaching by introducing aspects of quality management, safety, health and environment in the formation of the students. In such a way, they would be able to acquire a transverse additional formation that difficultly would be transmitted across the different subjects of the degree and that would improve their competitions when acceding to the working world.

Hitsauksen joustava laadunhallinta tilauskonepajassa

Diplomityön tavoitteena oli hitsauksen laadunhallinnan kuvaaminen ja kehittäminen ISO 9001 laadunhallintajärjestelmän ja uudistetun hitsauksen laatuvaatimusstandardin SFS-EN ISO3834-2:n mukaisesti tilauskonepajaan. Diplomityö koostuu teoriaosasta ja käytännön osasta. Teoriaosassa on käsitelty yleisiä laadunhallintaan liittyviä asioitasekä hitsauksen laadunhallintaan liittyviä asioita. Tarkastelun kohteina ovat olleet laadunhallinnan vaikutukset kilpailukykyyn sekä laadunhallinnan työkalut. Hitsauksen laadunhallintaa on käsitelty hitsatun rakenteen ja hitsausliitoksen laatuvaatimuksien, hitsaukseen vaikuttavien viranomaismääräysten sekä työturvallisuuden näkökulmista. Käytännön osassa kerrotaan hitsauksen laatujärjestelmän rakentamisesta Lievestuoreella sijaitsevaan TTP-Yhtiöt Oy:n tilauskonepajaan. Yrityksen hitsaustoiminnan nykytilanne arvioitiin ja sen pohjaltalaadittiin hitsauksen laatukäsikirja. Hitsauksen laatukäsikirja rakennettiin noudattaen hitsauksen laatuvaatimusstandardia SFS-EN ISO 3834-2 ja käyttäen apuna yrityksen ISO 9001:2000 laatukäsikirjaa. Tilauskonepajassa hitsauksen toimintajärjestelmältä vaaditaan joustavuutta, koska asiakkaiden hitsaustyölle asettamat vaatimukset vaihtelevat suuresti. Diplomityössä kuvataan esimerkin avulla hitsausohjeiden laatiminen, joka muodostaa yhden keskeisen osa-alueen hitsauksen laadunhallintajärjestelmästä. Hitsauksen laatujärjestelmän rakentamisen aikana hitsaushenkilöstöä informoitiin laatujärjestelmän edellyttämistä toimenpiteistä ja muutoksista luentojen avulla. Työn tuloksena saatiin myös yrityksen hitsaustoimintojen kehittämiseen, tehostamiseen sekä henkilökunnan koulutukseen liittyviä jatkotoimenpiteitä esille.