Caracterização de compósitos Nb-20%cu obtidos por moagem de alta energia e sinterizados por fase líquida

In this work, was studied the formation of a composite of the refractory metal niobium with copper, through the process of high-energy milling and liquid phase sintering. The HEM can be used to synthesize composite powders with high homogeneity and fine size particle distribution. It may also produce the solid solubility in immiscible systems such as Nb-Cu, or extend the solubility of systems with limited solubility. Therefore, in the immiscible system Cu-Nb, the high-energy milling was successfully used to obtain the composite powder particles. Initially, the formation of composite particles during the HEM and the effect of preparation technique on the microstructure of the material was evaluated. Four loads of Nb and Cu powders containing 20%wt Cu were synthesized by MAE in a planetary type ball mill under different periods of grinding. The influence of grinding time on the metal particles is evaluated during the process by the withdrawal of samples at intermediate times of milling. After compaction under different forces, the samples were sintered in a vacuum furnace. The liquid phase sintering of these samples prepared by HEM produced a homogeneous and fine grained. The composite particles forming the sintered samples are the addition of a hard phase (Nb) with a high melting point, and a ductile phase (Cu) with low melting point and high thermal and electrical conductivities. Based on these properties, the Nb-Cu system is a potential material for many applications, such as electrical contacts, welding electrodes, coils for generating high magnetic fields, heat sinks and microwave absorbers, which are coupled to electronic devices. The characterization techniques used in this study, were laser granulometry, used to evaluate the homogeneity and particle size, and the X-ray diffraction, in the phase identification and to analyze the crystalline structure of the powders during milling. The morphology and dispersion of the phases in the composite powder particles, as well the microstructures of the sintered samples, were observed by scanning electron microscopy (SEM). Subsequently, the sintered samples are evaluated for density and densification. And finally, they were characterized by techniques of measuring the electrical conductivity and microhardness, whose properties are analyzed as a function of the parameters for obtaining the composite

Degradação do PMMA através da reação despolimerização uitlizando catalisadores de óxidos mistos

In this work, mixed oxides were synthesized by two methods: polymeric precursor and gel-combustion. The oxides, Niquelate of Lanthanum, Cobaltate of Lanthanum and Cuprate of Lanthanum were synthesized by the polymeric precursor method, and treated at 300 º C for 2 hours, calcined at 800 º C for 6h in air atmosphere. In gel-combustion method were produced and oxides using urea and citric acid as fuel, forming for each fuel the following oxides Ferrate of Lanthanum, Cobaltato of Lanthanum and Ferrato of Cobalt and Lanthanum, which were submitted to the combustion process assisted by microwave power maximum of 10min. The samples were characterized by: thermogravimetric analysis, X-ray diffraction; fisisorção of N2 (BET method) and scanning electron microscopy. The reactions catalytic of depolymerization of poly (methyl methacrylate), were performed in a reactor of silica, with catalytic and heating system equipped with a data acquisition system and the gas chromatograph. For the catalysts synthesized using the polymeric precursor method, the cuprate of lanthanum was best for the depolymerization of the recycled polymer, obtaining 100% conversion in less time 554 (min), and the pure polymer, was the Niquelate of Lanthanum, with 100% conversion in less time 314 (min). By gel-combustion method using urea as fuel which was the best result obtained Ferrate of Lanthanum for the pure polymer with 100% conversion in less time 657 (min), and the recycled polymer was Cobaltate of Lanthanum with 100 % conversion in less time 779 (min). And using citric acid to obtain the best result for the pure polymer, was Ferrate of Lanthanum with 100% conversion in less time 821 (min and) for the recycled polymer, was Ferrate of Lanthanum with 98.28% conversion in less time 635 (min)

Design of functional hybrid coatings with anti-biofouling, self-cleaning and anti-reflecting applications

263 p.

Síntese de catalisadores do tipo LaNixFe1-xO3 como precursores catalíticos para reação oxidação parcial do metano

Nickel-bases catalysts have been used in several reform reactions, such as in the partial oxidation of methane to obtain H2 or syngas (H2 + CO). High levels of conversion are usually obtained using this family of catalysts, however, their deactivation resulting from carbon deposition still remains a challenge. Different approaches have been tested aiming at minimizing this difficulty, including the production of perovskites and related structures using modern synthesis methods capable of producing low cost materials with controlled microstructural characteristics at industrial scale. To establish grounds for comparison, in the present study LaNixFe1-xO3 (x=0, 0.3 or 0.7) perovskites were prepared following the Pechini method and by microwave assisted self-combustion. All samples were sub sequently calcined at 900 °C to obtain the target phase. The resulting ceramic powders were characterized by thermogravimetric analysis, infrared spectroscopy, X ray diffraction, specific area and temperature programmed reduction tests. Calcined samples were also used in the partial oxidation reaction of methane to evaluate the level of conversion, selectivity and carbon deposition. The results showed that the calcined samples were crystalline and the target phase was formed regardless of the synthesis method. According to results obtained by Rietveld refinement, we observed the formation of 70.0% of LaNi0.3Fe0.7O3 and 30.0% of La2O3 for samples LN3F7-900- P, LN3F7-900-M and 41,6% of LaNi0.7Fe0.3O3, 30.7% of La2NiO4 and 27.7% of La2O3 for samples LN7F3-900-P and LN7F3-900-M.Temperature-programmed profiles of the LaNiO3 sample revealed the presence of a peak around 510 °C, whereas the LaFeO3 sample depicted a peak above 1000°C. The highest l evel of methane conversion was obtained for LaNiO3 synthesized by the Pechini method. Overall, catalysts prepared by the Pechini method depicted better conversion levels compared to those produced by microwave assisted self-combustion

Preparação de óxidos mistos de níquel e zinco nanoparticulados a partir de combustíveis alternativos

The field of "Materials Chemistry" has been developing in recent years and there has been a great increase of interest in the synthesis and chemical and physical properties of new inorganic solids. New routes of synthesis and synthesis modified has been developed with the aim not only to optimize the processes in laboratory scale, but also on an industrial scale, and make them acceptable by current environmental legislation. The phenomenology of current solid state chemistry properties coupled with the high temperature superconductivity, ferromagnetism, porosity molecular and colors are evidence affected by the synthesis method, which in turn can influence the technological application of these materials. From this understanding, mixed oxides of nickel and zinc nanoparticulate were synthesized by microwave-assisted combustion route using three specific types of organic fuels employing the weight ratios 1:1/2 and 1:1 of cation metallic/fuel, in order to investigate the influence of such proportions to obtain the solids. The new fuels were chosen to replace, for example, urea or glycine that are the fuels most commonly preferred in this kind of synthesis. The powders without heat treatment were studied by Thermogravimetric analysis (TGA), X-Ray Diffraction (XRD) and then calcined at 900°C. After heat treatment, the samples were characterized by analysis of X Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The modified synthesis route porposed was effective for obtaining powders. Both the alternative fuels chosen as the different weight ratios employed, influenced in the morphology and obtaining oxides

Métodos no convencionales para la preparación de polímeros de coordinación porosos. Una aproximación económica, medioambientalmente amigable y escalable

293 p. El contenido del capítulo 5 está sujeto a confidencialidad

Comparación entre MgAl2O4 sintetizado por medio de sol-gel contra otros métodos

Este trabajo presenta los resultados de una comparación entre una espinela (MgAl2O4) obtenida mediante sol-gel contra otros procesos reportados, tales como el horno eléctrico de arco, la reacción en estado sólido y las microondas.

Formulación optimizada del refractario AZS/43-20-37

Los refractarios electro-fundidos con 32-35%, en peso de ZrO2 son utilizados en hornos para fundir vidrio.

Determinación de metales pesados y evaluación de la biotransferencia de especies inorgánicas de arsénico en leche bovina cruda

Propósito y método de estudio: En el presente estudio se evaluó el factor de biotransferencia (FBT) de arsénico (As) inorgánico en leche bovina cruda a través de agua de consumo en zonas contaminadas con este metaloide en México. Las muestras de leche y agua fueron colectadas en municipios de Durango, San Luis Potosí y Zacatecas zonas lugares donde se lleva a cabo la minería y con antecedente de contaminación por As. Para el análisis de As total fue empleado el método de digestión acida asistido por microondas (EPA 3052). La extracción de especies inorgánicas de As fue asistida por microondas empleando H3PO4 0.3 M a 90 °C durante 30 min, para su posterior separación en una resina de intercambio aniónico fuerte (SAX). La determinación de As total y de especies de arsénico se llevó a cabo por Espectrometría de Masas con Fuente de Plasma de Acoplamiento Inductivo (ICP-MS). Adicionalmente en las muestras leche previamente digeridas se analizó el contenido total de Pb, Cd, Cu, Zn y Fe por ICP-MS con la finalidad de evaluar el grado de contaminación por estos metales y establecer una correlación con la concentración de As en leche y el posible origen de la contaminación. Contribuciones y conclusiones La concentración de As total en el agua de la mayoría de las zonas de estudio superó el límite permisible para agua de consumo según la norma oficial NOM-127-SSA1-1994-2000 (25 μg/L). En cuanto a las muestras de leche, las concentraciones de As se encontraron entre el límite de detección y 472.80 μg/kg, siendo los estados de Durango y San Luis Potosí los que presentaron las concentraciones mayores. Las concentraciones de los otros metales analizados en leche mostraron que el promedio de Pb en leche en Zacatecas y San Luis Potosí, superó el límite permisible de acuerdo a la Comisión Europea. Así mismo para el caso del Cd la concentración media en el estado de San Luis Potosí superó los niveles ya reportados. Las zonas de San Luis Potosí, Durango y Zacatecas presentaron niveles altos de metales esenciales (Zn, Cu y Fe). Además se encontró que para los metales analizados (Pb, Cd, Cu, Zn y Fe) se presentó una correlación positiva estadísticamente significativa (p < 0.05) con As en leche, lo cual sugiere una fuente de contaminación común la minera que se realiza en los sitios de estudio. En cuanto a la concentración de especies de As inorgánico en leche, las concentraciones para la especie de As (V) fueron mayores (79.60-242.20 μg/kg) que las de As (III) (31.00-96.81 μg/kg); dado que la especie de As (V) presenta un menor grado de toxicidad podría indicar menor riesgo para la población que ingiere este alimento. Por último, se determinó el FBT de especies de As inorgánicas a través del agua de consumo, obteniéndose valores superiores a los ya reportados para As total (2.6 x 10-6 a 6 x 10-4); sin embargo, no se encontró una correlación significativa entre As en leche y arsénico en agua (p ˃0.05), lo cual sugiere que el agua no es la única vía de exposición de este metaloide. Para una posterior evaluación del factor de biotransferencia se sugiere el analizar el contenido de As en alimento y el suelo donde habita el organismo e incorporar estas fuentes de contaminación al modelo del FBT.

Estudo da síntese e propriedade magnética de ferritas de manganês/cobalto dopadas com níquel

For the chemical method of synthesis of co-precipitation were produced ferrite powders manganese-cobalt equal stoichiometric formula Mn (1-x) Co (x) Fe2O4, for 0 < x < 1, first reagent element using as the hydroxide ammonium and second time using sodium hydroxide. The obtained powders were calcined at 400 ° C, 650 ° C, 900 ° C and 1150 ° C in a conventional oven type furnace with an air atmosphere for a period of 240 minutes. Other samples were calcined at a temperature of 900 ° C in a controlled atmosphere of argon, to evaluate the possible influence of the atmosphere on the final results the structure and morphology. The samples were also calcined in a microwave oven at 400 ° C and 650 ° C for a period of 45 minutes possible to evaluate the performance of this type of heat treatment furnace. It was successfully tested the ability of this group include isomorphic ferrite with the inclusion of nickel cations in order to evaluate the occurrence of disorder in the crystalline structures and their changes in magnetic characteristics.To identify the structural, morphological, chemical composition and proportions, as well as their magnetic characteristics were performed characterization tests of X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDX), thermogravimetric (TG), vibrating sample magnetometry (MAV) and Mössbauer spectroscopy. These tests revealed the occurrence of distortion in the crystal lattice, changes in magnetic response, occurrence of nanosized particles and superparamagnetism

Estudio de procedimientos para la elaboración de cerámica Rakú y su aplicación en obra artística.

Se presenta el informe sobre los resultados de la investigación teórico-práctica acerca de los procedimientos de elaboración de cerámica Rakú y su aplicación en obra artística. Esta investigación ha sido necesaria debido a que en el amplio lenguaje universal de la cerámica, el Rakú en la actualidad es referente visual y parte importante principalmente en términos de cerámica artística. En El Salvador anteriormente no se contaba con ningún referente escrito que informara como preparar una pasta, o un vidriado, o menos aun como construir el equipo básico para Rakú, de hecho la técnica es bastante desconocida entre los artistas del país. Es así que los resultados de la investigación se exponen a estudiantes de la opción cerámica de la Escuela de Artes y a ceramistas interesados en desarrollar nuevas formas de expresión plástica. Los resultados son también parte del compromiso por parte del taller de cerámica de la Escuela de Artes de la Universidad de El Salvador en profundizar sobre los conocimientos en cerámica y exponerlos a la población en general. En este orden como resultado del proceso de investigación los principales aportes son: Ser el primer documento escrito acerca de la técnica de Rakú en nuestro país, facilitando la información a otros interesados para su aplicación. Presentar los resultados de la utilización de dos infusiones tradicionales de nuestro país: el agua de nacazcol y el añil, ambas produciendo efectos interesantes y aplicables a obra de carácter artístico elaborada con la técnica de Rakú, añadiendo así un elemento propio de nuestra cultura, además de la inclusión de diferentes diseños de hornos artesanales para la quema de piezas con esta técnica en particular.

Avaliação ambiental de manguezais adjacentes aos campos petrolíferos de Macau e Serra (RN), como subsídio às medidas mitigadoras ao processo erosivo

Among the various effects caused by the climate change and human intervention, the mangrove ecosystem changes through of the years has been worth mentioning, which hasn t known which are the pros and cons for the adjacent coastal and estuarine environments yet. It happens due to the present dynamism in these areas, besides of the difficult understanding of the processes associated with evolution. This study aimed to environmentally evaluate adjacent mangroves from the Macau and Serra oil fields, located on Rio Grande do Norte northern coast, to support the mitigating actions related to the containment of the erosive process, as well as, according to the principles of the Clean Development Mechanism (CDM), to assess the amount of atmospheric carbon sequestered by the studied ecosystem. An inventory was conducted through mangrouve mapping which has supplied this research, especially regarding to the structural characterization of mangrove areas. To understand the local mangrove behavior in a greater level detail, techniques of remote sensing, GIS and GPS were used to make an analogy between the current and past states of the mangrove studied, allowing to make anticipated projections for the future impacts or changes in that region. This study combined data from multispectral LANDSAT 5 TM, Landsat 7 ETM+ with radar microwave data from SAR RADARSAT-1, which increased the interpretation capacity of the data from optical sensor systems. The interpretations have been supported by the data field, representing a better and innovative methodology for the environmental and taxonomic characterization of mangrove forests considered. The results reveal that mangroves of the Ponta do Tubarão Sustainable Development Reserve are biologically representative areas and providing a variety of benefits, especially for local communities, constituting the priority sites for actions development aimed at conservation. They also have been showing the necessity to make mitigating measures in order to recover degraded areas through reforestation or creating new areas of mangrove, as currently 7.1% of the mangrove forests studied are dead or in an advanced state of decomposition. The amount of atmospheric carbon sequestered proved very significant when analyzed for the whole area, which is able to sequester atmospheric 4,294,458 Ton CO2 per year

[Texto del convenio de colaboración suscrito entre Artesanías de Colombia S. A. y la asociación de productores de mimbre de Ibagué – ASPROMI].

32 documentos : ilustraciones, fotografías.

LA REVALORIZACIÓN DE ESPACIOS URBANOS Y NUEVAS CONSIDERACIONES SOBRE EL VALOR DEL SUELO EN LAS CIUDADES INTERMEDIAS. SANTA ROSA. LA PAMPA. ARGENTINA.

En la ciudad de Santa Rosa, La Pampa, se advierte que el valor del suelo ya no se fija únicamente en función de mecanismos tradicionales de oferta y demanda sino a través de la incorporación de componentes perceptivos, vinculados, muchas veces, con las representaciones sociales de los habitantes urbanos. La histórica limitación del crecimiento en el sudoeste de la ciudad, por la presencia de una barrera natural como la laguna “Don Tomás”,y el denominado Barrio Los Hornos van siendo “neutralizados” por las intervenciones estatales que se van amalgamando con ciertas representaciones de la población que decide  recuperar viviendas tradicionales para adaptarlas a nuevas funciones, además de la ponderación  del paisaje a la hora de fijar valores a los inmuebles cercanos y en las construcciones de viviendas permanentes en los loteos de reciente ejecución. En esta presentación se exponen algunas consideraciones que enmarcan el análisis de las variaciones del valor del suelo urbano adoptadas  en la ciudad de Santa Rosa – La Pampa-, rescatando el rol de los agentes y/o actores involucrados, las prácticas que se utilizan para la fijación de valores y cómo influyen en la significación/resignificación de los lugares.

Produção e avaliação de materiais de referência para nutrientes e contaminantes inorgânicos em amostras agronômicas.

A intensa busca por confiabilidade de resultados torna cada vez mais importante o papel dos materiais de referência, principalmente em química analítica, pois fornecem referências metrológicas visando assegurar a rastreabilidade de medições e ainda são fundamentais para a validação de métodos analíticos. O aumento da demanda por novos materiais de referência é gradativo em todas as áreas do conhecimento, porém os setores agropecuários e de alimentos estão entre os mais carentes. No Brasil, essa demanda é atendida somente pela importação do material a custos elevados, sendo freqüente a inexistência de materiais adequados às necessidades do país. Nesse contexto, o presente trabalho visou à produção de material de referência para nutrientes e contaminantes inorgânicos em fosfato de rocha, matéria-prima utilizada para a fabricação de fertilizantes. O material foi produzido seguindo as seguintes etapas, estabelecidas internacionalmente pelas ISO GUIAS 30 a 35: preparo e envase do material, avaliação da homogeneidade, teste de estabilidade a curto e a longos períodos e na caracterização prévia, que consistiu na montagem do ensaio colaborativo, com a distribuição do material preparado a laboratórios que se dispuseram a colaborar com o projeto. Ainda foram realizados estudos voltados ao preparo da amostra visando a rapidez e redução de uso de reagentes. A avaliação da estimativa da massa mínima, da homogeneidade e da estabilidade do material foi realizada utilizando-se como técnica de determinação a espectrometria de emissão óptica com plasma indutivamente acoplado (ICP OES). Para a determinação de fósforo foi avaliado o emprego de espectrometria de emissão com plasma induzida por laser (LIBS). Os resultados foram submetidos à análise de variância de fator único (ANOVA) e a homogeneidade e a estabilidade do material apresentaram médias dentro do intervalo de confiança de 95%. Os resultados obtidos durante o preparo e através do ensaio colaborativo possibilitaram a caracterização química e o calculo das incertezas relativas a cada etapa do preparo do material, sendo elaborada a carta controle com os resultados do material de referência e as incertezas expandidas para cada um dos analitos em estudo. Parte do trabalho foi desenvolvido junto ao National Research Council Canada (NRCC) em Ottawa no Canadá, onde foi avaliada a aplicabilidade do sistema de combustão iniciada por radiação microondas no preparo de amostras de materiais de referência nacionais anteriormente preparados, fígado bovino (RM-Agro E3001a) e forrageira (RM-Agro E1001a), para a determinação de As, Cd, Cu e Pb por espectrometria de massas com plasma indutivamente acoplado (ICP-MS), sendo obtidos resultados que poderão ser aplicados em outros materiais orgânicos e inorgânicos.