Hardware-in-the-loop implementation of single- and dual-phase shift control for dual active bridge converters in EV applications

Isolated DC-DC converters play a significant role in fast charging and maintaining the variable output voltage for EV applications. This study aims to investigate the different Isolated DC-DC converters for onboard and offboard chargers, then, once the topology is selected, study the control techniques and, finally, achieve a real-time converter model to accomplish Hardware-In-The-Loop (HIL) results. Among the different isolated DC-DC topologies, the Dual Active Bridge (DAB) converter has the advantage of allowing bidirectional power flow, which enables operating in both Grid to Vehicle (G2V) and Vehicle to Grid (V2G) modalities. Recently, DAB has been used in the offboard chargers for high voltage applications due to SiC and GaN MOSFETs; this new technology also allows the utilization of higher switching frequencies. By empowering soft switching techniques to reduce switching losses, higher switching frequency operation is possible in DAB. There are four phase shift control techniques for the DAB converter. They are Single Phase shift, Extended Phase shift, Dual Phase shift, Triple Phase shift controls. This thesis considers two control strategies; Single-Phase, and Dual-Phase shifts, to understand the circulating currents, power losses, and output capacitor size reduction in the DAB. Hardware-In-The-Loop (HIL) experiments are carried out on both controls with high switching frequencies using the PLECS software tool and the RT box supporting the PLECS. Root Mean Square Error is also calculated for steady-state values of output voltage with different sampling frequencies in both the controls to identify the achievable sampling frequency in real-time. DSP implementation is also executed to emulate the optimized DAB converter design, and final real-time simulation results are discussed for both the Single-Phase and Dual-Phase shift controls.

Hardware-software design of embedded systems for intelligent sensing applications

This Thesis wants to highlight the importance of ad-hoc designed and developed embedded systems in the implementation of intelligent sensor networks. As evidence four areas of application are presented: Precision Agriculture, Bioengineering, Automotive and Structural Health Monitoring. For each field is reported one, or more, smart device design and developing, in addition to on-board elaborations, experimental validation and in field tests. In particular, it is presented the design and development of a fruit meter. In the bioengineering field, three different projects are reported, detailing the architectures implemented and the validation tests conducted. Two prototype realizations of an inner temperature measurement system in electric motors for an automotive application are then discussed. Lastly, the HW/SW design of a Smart Sensor Network is analyzed: the network features on-board data management and processing, integration in an IoT toolchain, Wireless Sensor Network developments and an AI framework for vibration-based structural assessment.

Non-linear modelling of microwave devices embedding nano-ferroelectric materials for real-time reconfigurable transmitarray

In this thesis work a nonlinear model for Interdigitated Capacitors (IDCs) based on ferroelectric materials, is proposed. Through the properties of materials such as Hafnium-Zirconium Oxide (HfZrO2), it is possible to realize tunable radiofrequency (RF) circuits. In particular, the model proposed in this thesis describes the use of an IDC, realized on a High-Resistivity silicon substrate, as a phase shifter for beam-steering applications. The model is obtained starting from already present experimental measurements, through which it is possible to identify a circuit model. The model is tested for both low power values and other power values using Harmonic Balance simulations, which show an excellent convergence of the model up to 40 dBm of input power. Furthermore, an array composed by two patches operating both at 2.55 GHz, which exploits the tunable properties of the HfZrO-based IDC is proposed. At 0dBm the model shows a 47° phase shift with polarization -1 V and 1 V which leads to a 11° steering of the main lobe of the array.

The road to augmented reality: a comprehensive study of hardware and applications over the last ten years

Augmented reality has been growing extensively over the years in all aspects and multiple fields. My aim in this paper is to present a comprehensive study on augmented reality(AR) hardware and its applications from early developments to the possible future trends. Particularly my research is more focused on last 11 years(2012-2022), where I systematically reviewed 30 research papers per year to get a clear knowledge on trends of AR. A total of 330 publications were reviewed and grouped according to their application. The review's main contribution is to show the entire landscape of AR research and to provide a broad view of how it has evolved. Along with various AR glasses history and specifications are presented in detail. In the penultimate chapter I explained my methodology of research following my analysis from the past to the present along with my thoughts for the future. To conclude my study, In the final chapter I made some statements about possible future with AR, VR and XR(extended reality).

Studio di interazione hardware/software tra Raspberry e nanoVNA

L’obiettivo della tesi è quello di realizzare un progetto basato sull’interazione tra Raspberry Pi e NanoVNA, allo scopo di rendere automatico il processo di acquisizione dei dati di questo strumento di misura. A tal fine è stato sviluppato un programma in linguaggio Python, eseguibile dal terminale del Raspberry Pi, che permette all’utente di inserire agevolmente i parametri essenziali, come l’orario di inizio e termine delle misurazioni e l'intervallo di tempo tra una rilevazione e l’altra.

Nodi sensori LoRaWAN a micropotenze: progettazione hardware, firmware e a livello di applicazione

L'elaborato parte da una scheda di sviluppo commerciale per arrivare a realizzare una rete LoRaWAN comprensiva di End-Node, Gateway e Application Server. In maniera specifica, l'elaborato affronta il problema della progettazione di end-node a micropotenze. Dopo aver studiato e collaudato la piattaforma di sviluppo, è stata affrontata la problematica dell'ottimizzazione energetica a diversi livelli: scelta di componenti con correnti di perdita estremamente ridotte, tecniche di power gating temporizzato, comportamento adattativo del nodo, impostazione dei consumi del nodo mediante i server della rete. L'elaborato presenta infine il layout del PCB progettato, pronto per la fabbricazione, insieme a stime del tempo di vita dell'end-node in funzione della frequenza di trasmissione e della capacità delle batterie utilizzate.

Analysis, Design, and Hardware-in-the-Loop Validation of Multi-Active Bridge Converters

This master's thesis investigates different aspects of Dual-Active-Bridge (DAB) Converter and extends aspects further to Multi-Active-Bridges (MAB). The thesis starts with an overview of the applications of the DAB and MAB and their importance. The analytical part of the thesis includes the derivation of the peak and RMS currents, which is required for finding the losses present in the system. The power converters, considered in this thesis are DAB, Triple-Active Bridge (TAB) and Quad-Active Bridge (QAB). All the theoretical calculations are compared with the simulation results from PLECS software for identifying the correctness of the reviewed and developed theory. The Hardware-in-the-Loop (HIL) simulation is conducted for checking the control operation in real-time with the help of the RT box from the Plexim. Additionally, as in real systems digital signal processor (DSP), system-on-chip or field programmable gate array is employed for the control of the power electronic systems, and the execution of the control in the real-time simulation (RTS) conducted is performed by DSP.

Applicazione di un modello bi-obiettivo per la progettazione sostenibile di sistemi produttivi riconfigurabili

Negli ultimi anni la competitività nei mercati è notevolmente cresciuta, la complessità dei prodotti industriali è considerevolmente aumentata e quest’ultimi devono ora essere accuratamente ottimizzati sotto ogni aspetto. I prodotti, oltre ad avere dei cicli di vita più brevi, sono soggetti a un’alta personalizzazione e a una domanda variabile. Per rimanere competitive, le aziende manifatturiere devono possedere nuovi tipi di sistemi di produzione che siano convenienti e molto reattivi a tutti questi cambiamenti del mercato, quali i Sistemi di produzione riconfigurabili (Reconfigurable Manufacturing System - RMS). La particolarità di tali sistemi risiede nella capacità di cambiare rapidamente le loro strutture hardware e software, aspetto che li renda idonei a soddisfare la produzione moderna. Oltre agli aspetti produttivi, l’attenzione odierna è incentrata anche sulle tematiche ambientali legate al risparmio energetico durante i processi produttivi, alla riduzione delle quantità di CO2 emesse e alla sostenibilità ambientale. L’obiettivo di questa tesi è quello di proporre un modello di ottimizzazione multi-obiettivo che tenga conto sia della minimizzazione del tempo complessivo necessario alla movimentazione dei prodotti e alla riconfigurazione delle macchine, e sia della minimizzazione del consumo energetico. Tale modello è stato applicato ad un caso studio realistico che ha permesso di individuare un trade-off tecnico-ambientale individuando la frontiera di Pareto con punto di ottimo (134.6 min; 9346.3 kWh) che si discosta del 57% dal valore trovato ottimizzando la funzione tempo, e dello 0.76% dal valore ottenuto ottimizzando la funzione energia.

Interfacciamento di GnuRadio con dispositivi hardware

In questa tesi viene spiegato il funzionamento e utilizzo di Software GnuRadio. Con l’approccio previsto da GnuRadio, il progettista diventa uno sviluppatore software che costruisce una SDR. Per la costruzione della SDR viene usato un Hardware esterno. In questa tesi e stato usato Hardware chiamato SDR ADALM-PLITO, dove viene spiegato il suo funzionamento e interfacciamento attraverso GnuRadio.

Teste "W" 20 metros : proposta computadorizada para analise da performance especifica em atletas de voleibol

Universidade Estadual de Campinas . Faculdade de Educação Física

Concepção e implementação de um sistema para analise cinematica de movimentos humanos

Universidade Estadual de Campinas. Faculdade de Educação Física

AcMus: an open, integrated platform for room acoustics research

This article describes the design, implementation, and experiences with AcMus, an open and integrated software platform for room acoustics research, which comprises tools for measurement, analysis, and simulation of rooms for music listening and production. Through use of affordable hardware, such as laptops, consumer audio interfaces and microphones, the software allows evaluation of relevant acoustical parameters with stable and consistent results, thus providing valuable information in the diagnosis of acoustical problems, as well as the possibility of simulating modifications in the room through analytical models. The system is open-source and based on a flexible and extensible Java plug-in framework, allowing for cross-platform portability, accessibility and experimentation, thus fostering collaboration of users, developers and researchers in the field of room acoustics.

Students' collective knowledge construction in the virtual learning environment ""ToLigado - your school interactive newspaper""

Introduction. The ToLigado Project - Your School Interactive Newspaper is an interactive virtual learning environment conceived, developed, implemented and supported by researchers at the School of the Future Research Laboratory of the University of Sao Paulo, Brazil. Method. This virtual learning environment aims to motivate trans-disciplinary research among public school students and teachers in 2,931 schools equipped with Internet-access computer rooms. Within this virtual community, students produce collective multimedia research documents that are immediately published in the portal. The project also aims to increase students' autonomy for research, collaborative work and Web authorship. Main sections of the portal are presented and described. Results. Partial results of the first two years' implementation are presented and indicate a strong motivation among students to produce knowledge despite the fragile hardware and software infrastructure at the time. Discussion. In this new environment, students should be seen as 'knowledge architects' and teachers as facilitators, or 'curiosity managers'. The ToLigado portal may constitute a repository for future studies regarding student attitudes in virtual learning environments, students' behaviour as 'authors', Web authorship involving collective knowledge production, teachers' behaviour as facilitators, and virtual learning environments as digital repositories of students' knowledge construction and social capital in virtual learning communities.

Developing and implementing an open and non-proprietary device description for FOUNDATION fieldbus based on software standards

Support for interoperability and interchangeability of software components which are part of a fieldbus automation system relies on the definition of open architectures, most of them involving proprietary technologies. Concurrently, standard, open and non-proprietary technologies, such as XML, SOAP, Web Services and the like, have greatly evolved and been diffused in the computing area. This article presents a FOUNDATION fieldbus (TM) device description technology named Open-EDD, based on XML and other related technologies (XLST, DOM using Xerces implementation, OO, XMIL Schema), proposing an open and nonproprietary alternative to the EDD (Electronic Device Description). This initial proposal includes defining Open-EDDML as the programming language of the technology in the FOUNDATION fieldbus (TM) protocol, implementing a compiler and a parser, and finally, integrating and testing the new technology using field devices and a commercial fieldbus configurator. This study attests that this new technology is feasible and can be applied to other configurators or HMI applications used in fieldbus automation systems. (c) 2008 Elsevier B.V. All rights reserved.

A small area 8 bits 50 MHz CMOS DAC for Bluetooth transmitter

This paper presents a small-area CMOS current-steering segmented digital-to-analog converter (DAC) design intended for RF transmitters in 2.45 GHz Bluetooth applications. The current-source design strategy is based on an iterative scheme whose variables are adjusted in a simple way, minimizing the area and the power consumption, and meeting the design specifications. A theoretical analysis of static-dynamic requirements and a new layout strategy to attain a small-area current-steering DAC are included. The DAC was designed and implemented in 0.35 mu m CMOS technology, requiring an active area of just 200 mu m x 200 mu m. Experimental results, with a full-scale output current of 700 mu A and a 3.3 V power supply, showed a spurious-free dynamic range of 58 dB for a 1 MHz output sine wave and sampling frequency of 50 MHz, with differential and integral nonlinearity of 0.3 and 0.37 LSB, respectively.