Chemical and mineral compositions of bottom sediments and ferromanganese crusts and nodules near Iceland

Results of study of bottom sediments near Iceland and on the Jan Mayen Island are reported. It was found that in recent sediments chemical elements are mainly associated with pyro- and volcanoclastics. In some areas adjusted to deep-seated faults ancient iron-manganese crusts and sediments occur. They are rich in Ni, Co, V, Cu, Mo, Cd and other elements associated with endogenic matter.

Composition of bottom sediments from the Guinea Basin

Geomorphology of the Guinea Basin is described along with sediments from cores collected on the abyssal plain, within the abyssal hill zone, and in the eastern part of the Chain Fracture Zone. Stratigraphic differentiation of deep-sea sediments was based on diatom analysis, geochemical and lithological data. Holocene and Pleistocene were identified by these criteria. The lower boundary of Holocene is was found from a marked decrease in CaCO3 concentration and total diatom count. Mineral and chemical compositions are given for coarse silt fraction of various Late Pleistocene sediments. It is shown that this facial complex is determined by tectonic position of the Guinea Basin.

Grain size percentiles and Mk values of coastal sediments from Schleswig Holstein, western Baltic Sea

In einer Fülle sedimentpetrographischer Arbeiten wird versucht, aus der Korngrößenverteilung und der Mineralzusammensetzung von Sanden Schlüsse auf ihre Herkunft, ihre Transportrichtung oder ihr Ablagerungsmilieu abzuleiten, die für die Lösung geologischer und ebenso auch wasserbaulicher Probleme nötig sind. Diese Literatur steckt noch voller Widersprüche und Fehlschlüsse. In der vorliegenden Arbeit wird daher versucht, den Mechanismus des Sandtransports vom Grundsätzlichen her besser verständlich zu machen. Das geschieht anhand zweier ausgewählter und eingehend untersuchter Beispiele aus dem Küstenbereich der westlichen Ostsee unter Einbeziehung der Erfahrungen an vielen Vergleichsproben aus verschiedensten Sedimentationsräumen. Unentbehrlich für das Verständnis der transportbedingten Veränderungen an den Sanden ist das sog. 'Äquivalenzprinzip' (Abschnitt 2). Es stellt fest, daß es in einem von einer Strömung transportierten Sediment immer Körner zwar verschiedener Korngröße, aber auch entsprechend verschiedener Dichte und/oder Kornform gibt, die miteinander transportiert und abgelagert werden, weil unter den herrschenden hydraulischen Bedingungen diese Eigenschaften einander voll kompensieren. In Abschnitt 3 wird kurz die von Rittenhouse angegebene Methode geschildert, mit der man an natürlichen Sedimenten unter der sehr allgemein gehaltenen 'Äquivalenzbedingung' gleicher Transportierbarkeit bestimmen kann, welches Korngrößenverhältnis ein bestimmtes Verhältnis der Dichten kompensieren kann. Die von Rittenhouse am Beispiel von Flußsanden gefundene Funktion zwischen der Dichte der Körner und ihrem Äquivalenzverhältnis gegen Quarzkörner wird hier als erste Näherung auch für die Transportverhältnisse von Strandsanden zugrunde gelegt. In Abschnitt 6 wird gezeigt, daß das auch gerechtfertigt ist. In Abschnitt 4 wird eine allgemein brauchbare Methode abgeleitet, mit der man nicht nur unter stark vereinfachenden Annahmen, sondern auch an Sanden mit realen, stets komplexen Korn-größenverteilungen die Folgen des Äquivalenzprinzips für die Verteilung von Mineralen verschiedener Dichte berechnen kann. Für jede Serie von Sanden, deren Korngrößenverteilungen entlang des Transportweges eine bestimmte, von den Transportbedingungen abhängige Entwicklung durchmachen, ergibt sich damit eine Kurvenschar, die beschreibt, wie sich die Mengen von Mineralien mit verschiedenen Dichten in den einzelnen Korngrößenklassen dabei ändern müßten, vorausgesetzt, daß sie im gesamten Korngrößenbereich gleich verfügbar wären. Diese Kurvenschar ist die 'Charakteristik' des betreffenden Transportfalles. Durch den Vergleich zwischen den nach der Charakteristik in den einzelnen Klassen zu erwartenden Mineralmengen mit den in dem betrachteten Transportfall tatsächlich gefundenen läßt sich deren relative, d. h. auf die Menge des Quarzes bezogene 'Verfügbarkeit' berechnen. Sie wird durch die sog. 'hydraulischen Verhältnisse' (Rittenhouse) ausgedrückt, die im Gegensatz zu den 'Klassenverhältnissen' von der Korngrößensonderung beim Transport unabhängig und nur von der Zusammensetzung des Ausgangsmaterials bestimmt sind, solange beim Transport allein das Äquivalenzprinzip wirksam ist. In den untersuchten Fällen von Sandtransport an zwei Strandabschnitten der westlichen Ostsee (Abschnitt 5) zeigte dieser Vergleich (Abschnitt 6), daß die beobachtete Verteilung von Schwermineralen nicht allein durch Transportsonderung unter Gültigkeit des Äquivalenzprinzips erklärt werden kann, sondern daß dabei offenbar auch mechanische Zerkleinerung der Körner während des Transports mitgewirkt haben muß. Nur ein solcher, von der Transportsonderung unabhängiger Effekt kann als Transportrichtungs-Kriterium benutzt werden, wenn die Entwicklung der Korngrößenverteilungen allein keine Entscheidung erlaubt. Wie die Beispiele zeigen, läßt sich Klarheit über die bisher noch sehr umstrittene Frage nach dem Ausmaß der transportbedingten mechanischen Zerkleinerung von Sandkörnern nur gewannen, wenn in Zukunft versucht wird, bei der Bearbeitung natürlicher Beispiele den Einfluß der stets vorhandenen Transportsonderung auf Veränderungen des Mineralbestandes unter Anwendung des Äquivalenzprinzips rechnerisch auszuschalten. Über dieses wesentlichste Ergebnis hinaus erlauben die dargestellten Zusammenhänge auch eine kritische Stellungnahme zu den oben erwähnten allgemeinen Problemen und führen zu methodischen und sachlichen Verbesserungsvorschlägen für weitere Untersuchungen an klastischen Sedimenten.

Petrology at DSDP Leg 66 Holes

The sandstone petrology of Leg 66 samples provides insights into changes through time in the geology of the source regions along the Guerrero portion of the Middle America continental margin. This in turn constrains possible models of the evolution of the Middle America Trench (e.g., de Czerna, 1971; Malfait and Dinkleman, 1972; Karig, 1974). Primarily medium-grained sands and sandstones, representing the widest variety available of trench/trench slope settings and ages, were analyzed in both light and heavy mineral studies. Standard techniques were used as much as possible in order to compare results from other margins and from ancient rocks.

Representative and whole rock analyses of rocks from Filchnerfjella, Antarctica

The geological history of Filchnerfjella and surrounding areas (2°E to 8°E) in central Dronning Maud Land, East Antarctica, is constructed from metamorphic and igneous petrology, and structural investigations. The geology of Filchner-fjella consists mainly of metamorphic rocks accompanied by intrusive rocks. Two stages of metamorphism can be recognized in this area. The earlier stage metamorphism is defined as a porphyroblast stage (garnet, hornblende, and sillimanite stable), and the later one is recognized as a symplectic stage (orthopyroxene and cordieritestable). Taking metamorphic textures and geothermobarometries into account, the rocks experienced an early high-P/medium-T followed by a low-P and high-T stage. Partial melting took place during the low-P/high-T stage, because probable melt of leucocratic gneiss contains cordierite. The field relationships and petrography of the syenite at Filchnerfjella are similar to those of post-tectonic plutons from central Dronning Maud Land, and most of the post-tectonic intrusive rocks have within-plate geochemical features. The structural history in Filchnerfjella and surrounding areas can be divided into the Pan-African stage and the Meso to Cenozoic stage that relates to the break-up of Gondwana.

(Appendix 1-4) Geochemistry, desorption methods, TOC, TC, and mineral content of different settings

Sorption of volatile hydrocarbon gases (VHCs) to marine sediments is a recognized phenomenon that has been investigated in the context of petroleum exploration. However, little is known about the biogeochemistry of sorbed methane and higher VHCs in environments that are not influenced by thermogenic processes. This study evaluated two different extraction protocols for sorbed VHCs, used high pressure equipment to investigate the sorption of methane to pure clay mineral phases, and conducted a geochemical and mineralogical survey of sediment samples from different oceanographic settings and geochemical regimes that are not significantly influenced by thermogenic gas. Extraction of sediments under alkaline conditions yielded higher concentrations of sorbed methane than the established protocol for acidic extraction. Application of alkaline extraction in the environmental survey revealed the presence of substantial amounts of sorbed methane in 374 out of 411 samples (91%). Particularly high amounts, up to 2.1 mmol kg**-1 dry sediment, were recovered from methanogenic sediments. Carbon isotopic compositions of sorbed methane suggested substantial contributions from biogenic sources, both in sulfate-depleted and sulfate-reducing sediments. Carbon isotopic relationships between sorbed and dissolved methane indicate a coupling of the two pools. While our sorption experiments and extraction conditions point to an important role for clay minerals as sorbents, mineralogical analyses of marine sediments suggest that variations in mineral composition are not controlling variations in quantities of sorbed methane. We conclude that the distribution of sorbed methane in sediments is strongly influenced by in situ production.

Mineral composition of 0.1-0.05 mm grain size fraction from the surface layer of bottom sediments in the West European province of the Atlantic Ocean

Rock material sampled from the Mir manned deep-sea submersibles and by dradges, grabs, and sediment cores over a vast area of the North Atlantic was analyzed to show that this material is of continental origin, unlike original rocks of the ocean floor. It is proved to be related to iceberg rafting during Quaternary glaciations. Independent data on distribution and composition of sandy and silty grains in sediment cores also support this relation to the recent glaciation. New criteria for identification of iceberg rock matter in pelagic sediments are presented on the base of analysis of all available data.

(Table T1) Mineral composition of turbidite sands and sandstones from ODP Leg 190 sites

During Ocean Drilling Program Leg 190 several turbidite successions in the Nankai Trough were drilled through including Pleistocene trench fill (Sites 1173 and 1174), Pleistocene-Pliocene slope basin deposits and underlying trench fill (Sites 1175 and 1176), Miocene Shikoku Basin deposits (Site 1177), and upper Miocene trench fill (Site 1178). Sands from the Pleistocene trench-fill succession of the Nankai Trough are of mixed derivation with significant monomineralic components (quartz and feldspar) and mafic to intermediate volcanic rock fragments, in addition to sedimentary and less abundant metamorphic detritus. They have a source in the Izu collision zone in central Honshu. Sands from the slope and accreted trench fill at Sites 1175 and 1176 are dominated by quartz with less abundant feldspar, sedimentary rock fragments, and only minor volcanic and metamorphic rock fragments. In contrast to the trench turbidites of Sites 1173 and 1174, these sands are very quartzose with characteristic radiolarian chert fragments. Volcanic rock fragments are mainly of silicic composition. Potential sources of these sands are uplifted subduction complexes of southwest Japan. Sands from the accreted trench turbidites at Site 1178 have clast types similar to those at Sites 1175 and 1176. In contrast, however, framework detrital modes are distinctive, with Site 1178 sands having substantially lower total quartz contents and more abundant fine-grained sedimentary rock fragments. These sands were also probably derived from the island of Shikoku, but their composition indicates that sedimentary rocks were abundant in the source area and these may have been Miocene forearc basin successions that were largely removed by erosion. Erosional remnants of Miocene forearc basin deposits are present on the Kii Peninsula east-northeast of Shikoku. Erosion followed a phase of exhumation of the Shimanto Belt indicated by apatite fission track ages at ~10 Ma. Sand in the lower-upper Miocene turbidites of the lower Shikoku Basin section at Site 1177 is more varied in composition, with the upper part of the unit similar to Site 1178 (i.e., rich in sedimentary rock fragments) and the lower part similar to those at Sites 1175 and 1176 (i.e., rich in quartz with some silicic volcanic rock fragments). Sands from the lower part of the Miocene turbidite unit were derived from a continental source with plutonic and volcanic rocks, possibly the inner zone of southwest Japan.

Lithospheric thickness of Pangea

Surface wave tomography, using the fundamental Rayleigh wave velocities and those of higher modes between 1 and 4 and periods between 50 and 160 s, is used to image structures with a horizontal resolution of ~250 km and a vertical resolution of ~50 km to depths of ~300 km in the mantle. A new model, PM_v2_2012, obtained from 3×10**6 seismograms, agrees well with earlier lower resolution models. It is combined with temperature estimates from oceanic plate models and with pressure and temperature estimates from the mineral compositions of garnet peridotite nodules to generate a number of estimates of SV(P,T) based on geophysical and petrological observations alone. These are then used to estimate the unrelaxed shear modulus and its derivatives with respect to pressure and temperature, which agree reasonably with values from laboratory experiments. At high temperatures relaxation occurs, causing the shear wave velocity to depend on frequency. This behaviour is parameterised using a viscosity to obtain a Maxwell relaxation time. The relaxation behaviour is described using a dimensionless frequency, which depends on an activation energy E and volume Va. The values of E and Va obtained from the geophysical models agree with those from laboratory experiments on high temperature creep. The resulting expressions are then used to determine the lithospheric thickness from the shear wave velocity variations. The resolution is improved by about a factor of two with respect to earlier models, and clearly resolves the thick lithosphere beneath active intracontinental belts that are now being shortened. The same expressions allow the three dimensional variations of the shear wave attenuation and viscosity to be estimated.