Spillover: the empirical utilisation of the concept. An empirical review of the social scientific corpus between 2004-2014

In recent decades, spillover has become a highly influential concept which has led to the initiation of new theoretical and methodological approaches that are designed to understand how people attempt to reconcile their work and private lives. The very notion of spillover presupposes that these spheres are connected, since the people who move between them bring certain ‘less visible’ content with them such as cognitive or affective mental constructs, skills, behaviors, etc. This paper attempts to create fresh insight into the different areas, themes and methodologies related to how spillover has been addressed over the last ten years. Four main categories are discussed based on the 76 academic articles that were selected: (1) general spillover research, (2) job flexibility and spillover, (3) individual coping strategies, and (4) the spillover effect on the different genders. The final section of the paper provides a tentative synthesis of the main conclusions and findings from the examined papers.

Ensemble fuzzy belief intrusion detection design

With the rapid growth of the Internet, computer attacks are increasing at a fast pace and can easily cause millions of dollar in damage to an organization. Detecting these attacks is an important issue of computer security. There are many types of attacks and they fall into four main categories, Denial of Service (DoS) attacks, Probe, User to Root (U2R) attacks, and Remote to Local (R2L) attacks. Within these categories, DoS and Probe attacks continuously show up with greater frequency in a short period of time when they attack systems. They are different from the normal traffic data and can be easily separated from normal activities. On the contrary, U2R and R2L attacks are embedded in the data portions of the packets and normally involve only a single connection. It becomes difficult to achieve satisfactory detection accuracy for detecting these two attacks. Therefore, we focus on studying the ambiguity problem between normal activities and U2R/R2L attacks. The goal is to build a detection system that can accurately and quickly detect these two attacks. In this dissertation, we design a two-phase intrusion detection approach. In the first phase, a correlation-based feature selection algorithm is proposed to advance the speed of detection. Features with poor prediction ability for the signatures of attacks and features inter-correlated with one or more other features are considered redundant. Such features are removed and only indispensable information about the original feature space remains. In the second phase, we develop an ensemble intrusion detection system to achieve accurate detection performance. The proposed method includes multiple feature selecting intrusion detectors and a data mining intrusion detector. The former ones consist of a set of detectors, and each of them uses a fuzzy clustering technique and belief theory to solve the ambiguity problem. The latter one applies data mining technique to automatically extract computer users’ normal behavior from training network traffic data. The final decision is a combination of the outputs of feature selecting and data mining detectors. The experimental results indicate that our ensemble approach not only significantly reduces the detection time but also effectively detect U2R and R2L attacks that contain degrees of ambiguous information.

Living on both sides of the fence: A phenomenological study of human resource development professionals as downsizing survivors and strategic human resource development facilitators

This phenomenological study explored how HR professionals who identified themselves as facilitators of strategic HRD (SHRD) perceived the experience of being an organizational agent-downsizing survivor. Criterion and snowball sampling were used to recruit 15 participants for this study. A semi-structured interview guide was used to interview participants. Creswell's (2007) simplified version of Moustakas's (1994) Modification of the Stevick-Colaizzi-Keen Method of Analysis of Phenomenological Data was used to analyze the data. Four main themes and corresponding sub-themes emerged from an inductive data analysis. The four main themes were a) the emotionality of downsizing, b) feeling responsible, c) choice and control, and d) possibilities for growth. Participants perceived downsizing as an emotional organizational change event that required them to manage their own emotions while helping others do the same. They performed their roles within an organizational atmosphere that was perceived as chaotic and filled with apprehension, shock, and a sense of ongoing loss, sadness and grieving. They sometimes experienced guilt and doubt and felt deceptive for having to keep secrets from others when planning for downsizing. Participants felt a strong sense of responsibility to protect employees emotionally, balance employee and organizational interests, and try to ensure the best outcomes for both. Often being there for others meant that they put on their games faces and took care of themselves last. Participants spoke of the importance of choosing one's attitude, being proactive rather than reactive, and finding ways to regain control in the midst of organizational crisis. They also perceived that although downsizing was emotionally difficult to go through that it provided possibilities for self, employee, and organizational growth.

Effects of Number-Way Curriculum on Pre-Schoolers’ Mathematical Learning for Low Socioeconomic Status Children

The objective of this research is to test the effectiveness of a game-based mathematical curriculum Number-Way in preschools for low socioeconomic status (SES) children. This curriculum contains fifteen interesting number games representing four main principles. The result indicated that this curriculum promoted early mathematical competence for preschoolers significantly.

Lightweight middleware for SDR inter-components communication

The ability to use Software Defined Radio (SDR) in the civilian mobile applications will make it possible for the next generation of mobile devices to handle multi-standard personal wireless devices and ubiquitous wireless devices. The original military standard created many beneficial characteristics for SDR, but resulted in a number of disadvantages as well. Many challenges in commercializing SDR are still the subject of interest in the software radio research community. Four main issues that have been already addressed are performance, size, weight, and power. ^ This investigation presents an in-depth study of SDR inter-components communications in terms of total link delay related to the number of components and packet sizes in systems based on Software Communication Architecture (SCA). The study is based on the investigation of the controlled environment platform. Results suggest that the total link delay does not linearly increase with the number of components and the packet sizes. The closed form expression of the delay was modeled using a logistic function in terms of the number of components and packet sizes. The model performed well when the number of components was large. ^ Based upon the mobility applications, energy consumption has become one of the most crucial limitations. SDR will not only provide flexibility of multi-protocol support, but this desirable feature will also bring a choice of mobile protocols. Having such a variety of choices available creates a problem in the selection of the most appropriate protocol to transmit. An investigation in a real-time algorithm to optimize energy efficiency was also performed. Communication energy models were used including switching estimation to develop a waveform selection algorithm. Simulations were performed to validate the concept.^

Ensemble Fuzzy Belief Intrusion Detection Design

With the rapid growth of the Internet, computer attacks are increasing at a fast pace and can easily cause millions of dollar in damage to an organization. Detecting these attacks is an important issue of computer security. There are many types of attacks and they fall into four main categories, Denial of Service (DoS) attacks, Probe, User to Root (U2R) attacks, and Remote to Local (R2L) attacks. Within these categories, DoS and Probe attacks continuously show up with greater frequency in a short period of time when they attack systems. They are different from the normal traffic data and can be easily separated from normal activities. On the contrary, U2R and R2L attacks are embedded in the data portions of the packets and normally involve only a single connection. It becomes difficult to achieve satisfactory detection accuracy for detecting these two attacks. Therefore, we focus on studying the ambiguity problem between normal activities and U2R/R2L attacks. The goal is to build a detection system that can accurately and quickly detect these two attacks. In this dissertation, we design a two-phase intrusion detection approach. In the first phase, a correlation-based feature selection algorithm is proposed to advance the speed of detection. Features with poor prediction ability for the signatures of attacks and features inter-correlated with one or more other features are considered redundant. Such features are removed and only indispensable information about the original feature space remains. In the second phase, we develop an ensemble intrusion detection system to achieve accurate detection performance. The proposed method includes multiple feature selecting intrusion detectors and a data mining intrusion detector. The former ones consist of a set of detectors, and each of them uses a fuzzy clustering technique and belief theory to solve the ambiguity problem. The latter one applies data mining technique to automatically extract computer users’ normal behavior from training network traffic data. The final decision is a combination of the outputs of feature selecting and data mining detectors. The experimental results indicate that our ensemble approach not only significantly reduces the detection time but also effectively detect U2R and R2L attacks that contain degrees of ambiguous information.

Formação do profissional sanitarista: caminhos e percalços

The public health is a project that struggles for a fair, resolutive and democratic health and that aims to help the collective and social bodies starting from their real needs, being totally involved with inequality and social determination issues. Thus, it is of fundamental importance to form a professional commited to this project. This current study aims to understand the perception of teachers/militants of Public Health about the graduation of Healthcare professionals. Therefore, we look forward answering the following question: Which elements are relevant to the formation of the sanitarian professional? This is a field research, descriptive and exploratory, with a qualitative approach. For data collection, we used a semi-structured interview technique with veteran professionals as sanitarians and teachers of Public Health area. The data were analyzed based on the technique of thematic analysis of subject. This technique consists in structuring the text in units, in categories according analogic reunification. In this sense, were organized three analysis categories, whose titles were guided according to the study objectives, namely: "The Institutional Formation of Sanitarians"; "Elements that contribute to the Sanitarian formation " and "Possible Paths in Sanitarian Formation". Four main elements of sanitarian formation were emphasized: technical capacity to develop a sanitation work, based on three conceptual pillars of Public Health; Framework, foundation and support on Social Sciences, in the social concepts of health; Life history of the student, implication of this with the Public Health object; Field operation, in the territory, directly integrated to the service and the health system. The intervieweds imagine a path to the sanitarian formation: the Public Health should be well explored in its theory and practice in graduation, in any health area and obviously in the graduation of Public Health; the Lato Sensu courses, especially residency, would need a theoretical upgrading, given the creation of undergraduate courses on the area; the Stricto Sensu courses, while forming researchers and teachers in the area, should develop productions involved with the health system and the object of Public Health, in order to bring an effective return, in terms of applicability, in the health system. It is suggested that such a path should be complementary, in a sense of adding knowledge as it travels through graduation, postgraduation Lato Sensu and post-graduation Stricto Sensu. The idea, in general, is that the graduate-residence set / specialization-mastering / PhD compose a linear formation, ascending and complementary. To follow all this process effectively, it is necessary, and urgent, to think of regulation strategies of the formating procedures. It is also recommended that more studies are conducted in this area, specially a more careful evaluation of the undergraduate courses in Public Health, which is a current and relatively new issue on formation in the area.

Evolução dos sistemas de falhas de borda do Rifte Potiguar com base em curvas de crescimento de falhas

The discussion about rift evolution in the Brazilian Equatorial margin during the South America-Africa breakup in the Jurassic/Cretaceous has been focused in many researches. But rift evolution based on development and growth of faults has not been well explored. In this sense, we investigated the Cretaceous Potiguar Basin in the Equatorial margin of Brazil to understand the geometry of major faults and the influence of crustal heterogeneity and preexisting structural fabric in the evolution of the basin internal architecture. Previous studies pointed out that the rift is an asymmetrical half-graben elongated along the NE-SW direction. We used 2D seismic, well logs and 3D gravity modeling to analyze four major border fault segments and determine their maximum displacement (Dmax) and length (L) ratio in the Potiguar Rift. We constrained the 3D gravity modeling with well data and the interpretation of seismic sections. The difference of the fault displacement measured in the gravity model is in the order of 10% compared to seismic and well data. The fault-growth curves allowed us to divide the faulted rift border into four main fault segments, which provide roughly similar Dmax/L ratios. Fault-growth curves suggest that a regional uniform tectonic mechanism influenced growth of the rift fault segments. The variation of the displacements along the fault segments indicates that the fault segments were formed independently during rift initiation and were linked by hard and soft linkages. The latter formed relay ramps. In the interconnection zones the Dmax/L ratios are highest due to interference of fault segment motions. We divided the evolution of the Potiguar Rift into five stages based on these ratios and correlated them with the major tectonic stages of the breakup between South America and Africa in Early Cretaceous.

Evolução dos sistemas de falhas de borda do Rifte Potiguar com base em curvas de crescimento de falhas

The discussion about rift evolution in the Brazilian Equatorial margin during the South America-Africa breakup in the Jurassic/Cretaceous has been focused in many researches. But rift evolution based on development and growth of faults has not been well explored. In this sense, we investigated the Cretaceous Potiguar Basin in the Equatorial margin of Brazil to understand the geometry of major faults and the influence of crustal heterogeneity and preexisting structural fabric in the evolution of the basin internal architecture. Previous studies pointed out that the rift is an asymmetrical half-graben elongated along the NE-SW direction. We used 2D seismic, well logs and 3D gravity modeling to analyze four major border fault segments and determine their maximum displacement (Dmax) and length (L) ratio in the Potiguar Rift. We constrained the 3D gravity modeling with well data and the interpretation of seismic sections. The difference of the fault displacement measured in the gravity model is in the order of 10% compared to seismic and well data. The fault-growth curves allowed us to divide the faulted rift border into four main fault segments, which provide roughly similar Dmax/L ratios. Fault-growth curves suggest that a regional uniform tectonic mechanism influenced growth of the rift fault segments. The variation of the displacements along the fault segments indicates that the fault segments were formed independently during rift initiation and were linked by hard and soft linkages. The latter formed relay ramps. In the interconnection zones the Dmax/L ratios are highest due to interference of fault segment motions. We divided the evolution of the Potiguar Rift into five stages based on these ratios and correlated them with the major tectonic stages of the breakup between South America and Africa in Early Cretaceous.

Study of the calibration method of pressure-velocity probes and its application in a field of progressive plane waves

This dissertation presents a calibration procedure for a pressure velocity probe. The dissertation is divided into four main chapters. The first chapter is divided into six main sections. In the firsts two, the wave equation in fluids and the velocity of sound in gases are calculated, the third section contains a general solution of the wave equation in the case of plane acoustic waves. Section four and five report the definition of the acoustic impedance and admittance, and the practical units the sound level is measured with, i.e. the decibel scale. Finally, the last section of the chapter is about the theory linked to the frequency analysis of a sound wave and includes the analysis of sound in bands and the discrete Fourier analysis, with the definition of some important functions. The second chapter describes different reference field calibration procedures that are used to calibrate the P-V probes, between them the progressive plane wave method, which is that has been used in this work. Finally, the last section of the chapter contains a description of the working principles of the two transducers that have been used, with a focus on the velocity one. The third chapter of the dissertation is devoted to the explanation of the calibration set up and the instruments used for the data acquisition and analysis. Since software routines were extremely important, this chapter includes a dedicated section on them and the proprietary routines most used are thoroughly explained. Finally, there is the description of the work that has been done, which is identified with three different phases, where the data acquired and the results obtained are presented. All the graphs and data reported were obtained through the Matlab® routine. As for the last chapter, it briefly presents all the work that has been done as well as an excursus on a new probe and on the way the procedure implemented in this dissertation could be applied in the case of a general field.

X-ray diffraction analysis, binocular component analysis and radiocarbon dating of sediment cores from the NW Iberian shelf system

Based on a well-established stratigraphic framework and 47 AMS-14C dated sediment cores, the distribution of facies types on the NW Iberian margin is analysed in response to the last deglacial sea-level rise, thus providing a case study on the sedimentary evolution of a high-energy, low-accumulation shelf system. Altogether, four main types of sedimentary facies are defined. (1) A gravel-dominated facies occurs mostly as time-transgressive ravinement beds, which initially developed as shoreface and storm deposits in shallow waters on the outer shelf during the last sea-level lowstand; (2) A widespread, time-transgressive mixed siliceous/biogenic-carbonaceous sand facies indicates areas of moderate hydrodynamic regimes, high contribution of reworked shelf material, and fluvial supply to the shelf; (3) A glaucony-containing sand facies in a stationary position on the outer shelf formed mostly during the last-glacial sea-level rise by reworking of older deposits as well as authigenic mineral formation; and (4) A mud facies is mostly restricted to confined Holocene fine-grained depocentres, which are located in mid-shelf position. The observed spatial and temporal distribution of these facies types on the high-energy, low-accumulation NW Iberian shelf was essentially controlled by the local interplay of sediment supply, shelf morphology, and strength of the hydrodynamic system. These patterns are in contrast to high-accumulation systems where extensive sediment supply is the dominant factor on the facies distribution. This study emphasises the importance of large-scale erosion and material recycling on the sedimentary buildup during the deglacial drowning of the shelf. The presence of a homogenous and up to 15-m thick transgressive cover above a lag horizon contradicts the common assumption of sparse and laterally confined sediment accumulation on high-energy shelf systems during deglacial sea-level rise. In contrast to this extensive sand cover, laterally very confined and maximal 4-m thin mud depocentres developed during the Holocene sea-level highstand. This restricted formation of fine-grained depocentres was related to the combination of: (1) frequently occurring high-energy hydrodynamic conditions; (2) low overall terrigenous input by the adjacent rivers; and (3) the large distance of the Galicia Mud Belt to its main sediment supplier.

The development of a semantic model for the interpretation of mathematics including the use of technology

The semantic model developed in this research was in response to the difficulty a group of mathematics learners had with conventional mathematical language and their interpretation of mathematical constructs. In order to develop the model ideas from linguistics, psycholinguistics, cognitive psychology, formal languages and natural language processing were investigated. This investigation led to the identification of four main processes: the parsing process, syntactic processing, semantic processing and conceptual processing. The model showed the complex interdependency between these four processes and provided a theoretical framework in which the behaviour of the mathematics learner could be analysed. The model was then extended to include the use of technological artefacts into the learning process. To facilitate this aspect of the research, the theory of instrumentation was incorporated into the semantic model. The conclusion of this research was that although the cognitive processes were interdependent, they could develop at different rates until mastery of a topic was achieved. It also found that the introduction of a technological artefact into the learning environment introduced another layer of complexity, both in terms of the learning process and the underlying relationship between the four cognitive processes.

Assessment of the Spatial and Temporal Distribution of Functional Connectivity in Resting-State BOLD fMRI

Recent research into resting-state functional magnetic resonance imaging (fMRI) has shown that the brain is very active during rest. This thesis work utilizes blood oxygenation level dependent (BOLD) signals to investigate the spatial and temporal functional network information found within resting-state data, and aims to investigate the feasibility of extracting functional connectivity networks using different methods as well as the dynamic variability within some of the methods. Furthermore, this work looks into producing valid networks using a sparsely-sampled sub-set of the original data.

In this work we utilize four main methods: independent component analysis (ICA), principal component analysis (PCA), correlation, and a point-processing technique. Each method comes with unique assumptions, as well as strengths and limitations into exploring how the resting state components interact in space and time.

Correlation is perhaps the simplest technique. Using this technique, resting-state patterns can be identified based on how similar the time profile is to a seed region’s time profile. However, this method requires a seed region and can only identify one resting state network at a time. This simple correlation technique is able to reproduce the resting state network using subject data from one subject’s scan session as well as with 16 subjects.

Independent component analysis, the second technique, has established software programs that can be used to implement this technique. ICA can extract multiple components from a data set in a single analysis. The disadvantage is that the resting state networks it produces are all independent of each other, making the assumption that the spatial pattern of functional connectivity is the same across all the time points. ICA is successfully able to reproduce resting state connectivity patterns for both one subject and a 16 subject concatenated data set.

Using principal component analysis, the dimensionality of the data is compressed to find the directions in which the variance of the data is most significant. This method utilizes the same basic matrix math as ICA with a few important differences that will be outlined later in this text. Using this method, sometimes different functional connectivity patterns are identifiable but with a large amount of noise and variability.

To begin to investigate the dynamics of the functional connectivity, the correlation technique is used to compare the first and second halves of a scan session. Minor differences are discernable between the correlation results of the scan session halves. Further, a sliding window technique is implemented to study the correlation coefficients through different sizes of correlation windows throughout time. From this technique it is apparent that the correlation level with the seed region is not static throughout the scan length.

The last method introduced, a point processing method, is one of the more novel techniques because it does not require analysis of the continuous time points. Here, network information is extracted based on brief occurrences of high or low amplitude signals within a seed region. Because point processing utilizes less time points from the data, the statistical power of the results is lower. There are also larger variations in DMN patterns between subjects. In addition to boosted computational efficiency, the benefit of using a point-process method is that the patterns produced for different seed regions do not have to be independent of one another.

This work compares four unique methods of identifying functional connectivity patterns. ICA is a technique that is currently used by many scientists studying functional connectivity patterns. The PCA technique is not optimal for the level of noise and the distribution of the data sets. The correlation technique is simple and obtains good results, however a seed region is needed and the method assumes that the DMN regions is correlated throughout the entire scan. Looking at the more dynamic aspects of correlation changing patterns of correlation were evident. The last point-processing method produces a promising results of identifying functional connectivity networks using only low and high amplitude BOLD signals.

Snow line of the rhine-linth glacier in the upper wurm

The Wurmian Glaciation of the Alpine Foreland has been reconstructed in different phases as a result of investigations in the Rhine-Bodan region as well as in the Linth area. The whole High Glacial is divided in four main phases: ice advance into the piedmont basins, building-up of the foreland glaciation, high stages and retreat into the inner Alps. This epoch took up perhaps less than 12,000 years. During the period of building, an average increase of ice thickness of about 12 cm per year was sufficient to form an extensive foreland glacier within 5000-7000 years. The snow lines of the stades of the piedmont glaciation as well as of the local glaciers are calculated. Snow lines at about 1500 m a.s.l. led to an inner alpine ice build-up and an advance of glaciers towards the piedmont basins. To produce the foreland ice sheet, low snow lines of 900-1000 m a.s.l. were necessary. An interstadial phase before the maximum glaciation is evidenced by sediment sequences and a 14C-date of 22,100 BP. The chronology of ice retreat after 18 ka BP is still uncertain.

Stable isotope record of foraminifera from the Barents Sea

We measured the oxygen isotopic composition of planktonic and benthic foraminifera in three cores collected at key positions to reconstruct the paleoceanography of the Barents Sea: core ASV 880 on the path of the northern branch of Atlantic water inflowing from the Arctic Ocean, core ASV 1200 in the central basin near the polar front, and core ASV 1157 in the main area of brine formation. Modern seawater d18O measurements show that far from the coast, d18O variations are linearly linked to the salinity changes associated with sea ice melting. The foraminifer d18O records are dated by 14C measurements performed on mollusk shells, and they provide a detailed reconstruction of the paleoceanographic evolution of the Barents Sea during the Holocene. Four main steps were recognized: the terminal phase of the deglaciation with melting of the main glaciers, which were located on the surrounding continent and islands, the short thermal optimum from 7.8 ka B.P. to 6.8 ka B.P., a cold mid-Holocene phase with a large reduction of the inflow of Atlantic water, and the inception of the modern hydrological pattern by 4.7 ka B.P. Brine water formation was active during the whole Holocene. The paleoclimatic evolution of the Barents Sea was driven by both high-latitude summer insolation and the intensity of the Atlantic water inflow.