Produção e caracterização físico-mecânica de painel de compensado de Eucalyptus sp. e adesivo PVA

Studies on new adhesives and resins for bonding wood and wood products are being conducted with the intention of improving their properties, taking into account a lower environmental impact. For this reason new formulations of polyvinyl acetate (PVA) adhesives have been developed, because they have no chemicals in its composition extremely polluting and harmful to health, as is the case of formaldehyde-based resins, which in turn are the most commonly used today for wood panels production. This study tested three different formulations of PVA adhesives, with different times and temperatures of pressing for the production of Eucalyptus sp. Plywood, coming up in satisfactory results with respect to shear strength at the bondline, which was higher for the PVA adhesives compared with urea-formaldehyde and phenol. The results of MOE and MOR were lower than those values of the panels produced with urea and phenol-formaldehyde, and the results of physical tests showed to be close to the panels produced with these same adhesives

Análise das propriedades da madeira de estrutura de telhado após a ocorrência de um incêndio

The present study evaluated the mechanical properties of pieces of wood coming from the roof structure of a residence subject fire in the rural area of Itapeva/SP. The structure was built 25 years ago using wooden beams of the species Guarucaia (Peltophorum vogelianum), where the specimens were removed. The research methodology included qualitative evaluation of the samples, estimating the layer pyrolysis and carbonization of the wood, measuring of density and mechanical tests of compression parallel to grain, tension parallel to grain and shear. The mechanical properties of wood were analytically correlated with the layers carbonization and pyrolysis that are influenced by the temperature and time of fire; these values were estimated at 1000 °C and two hours for the case in question. The results indicate that the strength properties of degraded wood are different from a healthy wood. The level of thermodegradation, in general, can be measured by density, result in weight loss due to decomposition of the wooden components.

Caracterização metamórfica do Greenstone Belt de Guarinos - GO

The study area comprises Guarinos Greenstone Belt which is located in the centralwest state of Goias and has an approximate size of 280 km2. The present work has as main objective to characterize the metamorphism of the greenstone belt and the relationship between the tectonic events and the metamorphism. For the execution of the work we used data collected in the course Geological Mapping of Crystalline Area of the geology course of UNESP, classes 2009 and 2010, the data collected by Alex Choupina Joaquim Andrade Silva in his master's thesis and the information collected in field in the study area. This compilation of data allows approximately 200 thin sections have been evaluated and allowed the construction of the metamorphic map in scale 1:125.000, also allowed the preparation of the geological map in scale 1:125.000 greestone belt, based on 1:25.000 scale maps performed by students of UNESP and the mapping conducted by Silva (2011). The study area was divided into two tectonic compartments depending on the Shear Zone Engenho Velho that longitudinally crosses study area, with direction approximately NW-SE. The west compartment is bordered by granite-gneiss complex and the east compartment, seems thicker to the south and narrows gradually towards the north and its structure is seen in general as a great monoclinal with NW-SE direction with trim to SW, this way your stack was considered as a package of rocks at the base and metaultramafic metamafic the top, with a second package in tectonic contact, which is composed of detrital and chemical metasedimentary rocks. The east compartment is represented by the intrusion of a large granitic body surrounded by amphibolites and metasediments, is bounded on the east by a granite-gneiss complexes through thrust fault, and is bounded on the west by the other compartment. The structure of the compartment is seen as a major axis oriented roughly... (Completo abstract click electronic access below)

Caracterização geológica da terminação norte do Domo de Ambrósio - Bahia

The Ambrósio dome is a granodioritic batholiths of elliptical geometry, 40km length in the N-S direction and variable width of up to 8 km, has a weakly deformed nucleus with intensely deformed margins, in its northern portion is intruded in orthogneiss that belong to the Archean basement, and its southern part comes in direct contact with the volcano-sedimentary sequence of Paleoproterozoic Rio Itapicuru Greenstone Belt (RIGB), Bahia. From geological mapping on 1:25:000 scale were recognized two structural domains, termed West Domain and East Domain. From investigation of these domains was identified a major shear zone, which puts in contact two distinct stratigraphic sequences, one west, consisting primarily of metavulcanic and metapyroclastic rocks with records of low-grade regional metamorphism, and east discontinuity a metassedimentary domain, with record of gradational contact metamorphism, deformation and compression generated from the rise of Ambrosio Pluton. Such records put into question the structural and stratigraphic models in the literature so far

Estudo da inflexão da Serra do Garrote e sua influência na zona de falha de Vazante (MG)

The Vazante Fault Zone (VFZ), located northwestward of Minas Gerais, host the largest zinc deposit known in the Brazilian territory. This structure is hosted in Vazante’s Group rocks, a metassedimentary sequence of marine environment. Near Vazante is situated the south end of the VFZ. To the west, occur the Serra do Garrote inflexion, characterized by a curvature in the contact of Formations Serra do Garrote and Serra do Poço Verde. This structure is through the analysis of aerial imagery of the region and represented in the published geological maps. The objective of this work is to understand what causes this inflexion and determine whether it affects the VZF, causing a shift in the same, and possibly, in the mineralization as well. To this end, it was done a mapping work in the region covering the Serra do Garrote inflexion and the south end of the VFZ, in 1:25.000 scale, supplemented by petrographic description of thin section and geologic sections, with cooperated to the understanding of the structural evolution of the region. Data analysis allowed the identification of six deformation phases. The D1 an D2 phases generated the main foliation. The D3 phase generate kink bands folds, with NS axis and vertical axial plane. The fourth phase is responsible for generating the Vazante Fault Zone. The fifth phase produces low angle folds and shear zones, subparallel to S1//S2. The last phase generates folds with NW axis and vertical axial plane, with causes the inflection of lithologic contactas. Field observations also make possible the conclusion that the Vazante Fault Zone presents a south continuation, which is affected by deformation associated to D6 phase attributing to the trace of the VFZ a curved geometry, similar to that exhibited by lithologic contacts between units of the map

Planejamento, síntese e avaliação da capacidade de doação de óxido nítrico de novos derivados antiinflamatóios

A formação do trombo arterial, composto predominantemente por plaquetas, se dá sob condições de estresse de cisalhamento elevado, nos locais de lesão aterosclerótica vascular e fluxo sanguíneo perturbado e tem como consequência diminuição ou obstrução do calibre dos vasos dos diferentes órgãos podendo levar a eventos isquêmicos. As doenças cardiovasculares são consideradas as principais causas de morte no mundo. Nesse contexto, estima-se que a aterosclerose/aterotrombose seja a causa primária de doença arterial coronariana e acidente vascular cerebral representado mais de 50% das causas de mortes em países ocidentais . É sabido que a aterosclerose, primeiro evento que predispõe à aterotrombose, é considerada um processo inflamatório crônico, e que a utilização de antiinflamatórios não esteroidais (AINEs) COX-1, melhor estabilizam a estrutura da placa ateromatosa impedindo o rompimento e a consequente formação do trombo. Neste contexto, no presente trabalho foram obtidos de novos candidatos a fármacos com propriedades doadoras de NO e antiagregantes plaquetárias, através da estratégia de hibridação molecular dos AINEs contendo uma subunidade doadora de óxido nítrico, representada pelos furoxanos, e espaçada por uma subunidade N-acil hidrazônica. Dessa forma, a inibição da síntese de tromboxanos associada à doação de óxido nítrico permitiu atuação nas plaquetas através de um mecanismo múltiplo de ação com fins de diminuição da agregação plaquetária. Os produtos intermediários e finais apresentaram bons rendimentos e foram caracterizados por técnicas analíticas as quais predisseram que as estruturas propostas foram obtidas. Todos os compostos se como doadores de óxido nítrico. Os compostos 1a e 3a apresentaram atividade analgésica superior a dipirona, utilizada como controle. No ensaio de agregação plaquetária ―in vitro‖... (Resumo completo, clicar acesso eletrônico abaixo)

Ensaio de ligações de estruturas de madeira por chapas com dentes estampados em quatro espécies da família leguminosas

In the last years, the use of industrialized systems of lattice structures of wood as an alternative in the construction processes, is becoming more popular in Brazil, mainly for their commitment to the environment.The industrialized system of wooden lattice structures consists in a production of lattice structures, composed of pieces of wood where their mechanical connections are made with the sheet multi-toothed connectors (CDE).Among the many challenges to make this system competitive, the whole system of the connections between the pieces of wood not only must show functionality, but also speed, strength, versatility and economy. Referenced at Brazilian Standard for Wood Structures (NBR 7190/1997 - Project of timber structures) the sheet multi-toothed connectors, are analyzed using three test methods: tensile strength parallel to grain, tensile strength normal to the fibers and shear strength, all of them in two positions, αCH0=0o e αCH0=90o to four types of wood: Angelim (Vatairea heteroptera Ducke); Red-Angico (Parapiptadenia rigida (Benth) Brenae); Garapa (Apuleia leiocarpa (Vog.) Macbr) and Jatoba (Hymenaea stilbocarpa Hayne), belonging to the Leguminosae family and founded in several regions of Brazil.The purpose of this manuscript consists to analyze the mechanical connections with the sheet multi-toothed connectors through tests from NBR7190/1997

Geologia do platô N6 - província mineral de Carajás (SP)

The N6 Plateau presents an iron-ore occurence in Carajás Mineral Province, standing near to actually operating deposits. Geological mapping in 1:10,000 scale and integration of geochemical, geophysical, petrography and drilling turns possible interpretation of his geological evolution. The mapped area has lithotypes from Archean Grão Pará Group, comprising very lowgrade metamorphic basic rocks and iron formation and an Proterozoic sedimentary association of conglomeratic sandstones called as Caninana Unity. The structural geology in given by a regional scale homoclinal, where the Grão Pará Group strata dips towards SW, as a part of the Northern Limb of the Carajás Fold. Subsequent deformation associated to the installation of the Carajás Shear Zone presents as E-W fold axis. Geochemical evidence permits to consider de Parauapebas Formation as the rocks which has been hydrothermally-altered to outsourcing fluids responsible to deposition of iron formations in the oceanic system, including different signatures which can be interpreted as possible sub-embayments in the Carajás Basin. The iron ore in the area occurs in subsurface as very fine friable hematite generated by supergenous enrichment of the iron formation. The conceived geologic model differs from the current academic proposal on the fact that hydrothermal alteration has been involved on the jaspelite enrichment. Metamorphism on the Parauapebas Formation presents paragenesis considered as ocean-floor metamorphism which precedes de deformation insofar as the rocks show no tectonic fabric referring to shallow crust evolution. Geophysical methods such as magnetometry and gravimetry presents excellent results for structural interpretation in uneven exposed terrain

Avaliação mecânica da colagem estrutural entre compósitos poliméricos e materiais metálicos utilizados em dutos petroquímicos

The development of technology for structural composites has as one of its ends form a set of materials that combine high values of mechanical strength and stiffness and low density. Today, companies like Embraer and PETROBRAS and research institutions like NASA, working with these materials with recognized advantages in terms of weight gain, increased performance and low corrosion. We have developed a systematic study to determine the bond strength between composite carbon fiber / epoxy and fiberglass / epoxy laminate both bonded to a carbon steel which are widely used in the petrochemical industry and repair. For morphological evaluation and bonding between materials of different natures, ultrasound analysis, optical microscopy and stereoscopy were performed. To simulate actual conditions, the composites were subjected to conditioning by using heat shock temperatures from -50 to 80 ° C for 1000 cycles for composite carbon fiber / epoxy composites and 2000 cycles for fiberglass / epoxy . The use of composites studied here proved to be efficient to perform repairs in metallic pipes with application petrochemical, as when exposed to sudden changes of temperature (-50 ° to 80 ° C) cycling at 1000 to 2000 times, its mechanical properties (shear and tensile) practically do not change

Desenvolvimento de carreadores lipídicos nanoestruturados para administração cutânea de fluconazol

O fluconazol (FLU) é um antifúngico muito utilizado no tratamento de dermatomicoses devido à sua eficácia e segurança. No entanto, este pode apresentar perfil farmacocinético muitas vezes inadequado, promovendo recorrência da doença ou resistência do fungo, apresentando uma série de efeitos colaterais além de alta toxicidade. Por esta razão, há uma busca contínua de novos medicamentos antifúngicos mais potentes, mas, sobretudo, mais seguros que os existentes. Os carreadores lipídicos nanoestruturados (NLCs) são compostos por uma matriz contendo lipídio liquido e sólido, e possui como uma de suas vantagens a alta capacidade de encapsulamento. O objetivo do trabalho foi desenvolver e caracterizar NLCs para administração cutânea de fluconazol. A solubilidade do FLU foi avaliada em ácido oleico (AO) e monoestearato de glicerila (GMS) e observou-se uma maior incorporação de FLU na mistura desses lipídios do que nos compostos isolados. Os NLCs contendo AO, GMS, poloxamer-407, fosfatidilcolina de soja (PC) e FLU foram desenvolvidos empregando o método de homogeneização em alta velocidade de cisalhamento à quente. A caracterização foi realizada por espectroscopia de correlação de fótons e os resultados de diâmetro médio, índice de polidispersidade e potencial zeta foram de 218,63 e 314,1nm, 0,417 e 0,640 e -28,4 e -25,8mV para os NLCs com (NLC_FLU) e sem o FLU (NLC) respectivamente. No estudo de estabilidade, as formulações NLC e NLC_FLU foram armazenados à 8ºC e à temperatura ambiente e os resultados mostraram maior estabilidade durante os seis meses para os NLC_FLU armazenada à 8ºC. A morfologia dos NLCs foi determinada por microscopia eletrônica de varredura de efeito de campo na qual os NLCs apresentaram morfologia esférica e escala nanométrica. Uma metodologia foi validada por espectrofotometria na região do ultravioleta para a determinação da eficiência de encapsulação (EE) do fármaco que foi ...

Susceptibilidade ao estresse e qualidade de carne de suínos suplementados com diferentes níveis de Ractopamina

The ractopamine is a β-adrenergic agonist used as a divider of energy in diets for finishing pigs. However, research shows that this additive may effect on welfare and meat quality. In this context, the aim was to evaluate the influence in three levels of inclusion of ractopamine (0, 5 and 10ppm) in commercial pigs diet (castrated, males and females, n = 340) for 28 days pre-slaughter on the welfare and meat quality. The wellbeing was assessed by the behavior of animals, number of skin damages, carcass damages and physiological stress (lactate, cortisol and creatinine phosphokinase). The evaluation of meat quality was performed by analyzing pH, color, drip and cooking loss, shear force and marbling of the longissimus dorsi muscle of 90 selected pigs. There was no influence of treatments on the behavior, the total number of skin damages and carcass damages or concentration of cortisol and lactate. However, levels of the enzyme creatine phosphokinase (CPK) increased in pigs supplemented with ractopamine. This shows that, somehow, this additive led to physiological changes in animals that consumed it. PH and drip loss did not change by the addition of ractopamine in the diet. In contrast, the Longissimus dorsi of pigs that received ractopamine presented less intense red color and no difference was found in L* and b*. The inclusion of ractopamine in the diet reduced the degree of marbling, cooking loss and tenderness of the muscle. Supplementation did not lead to behavioral change, increased incidence of injury, plasma cortisol and lactate and minimal impact on meat quality. However, there was evidence that the animals fed the additive suffered physiological changes

Caracterização físico-mecânica de elementos estruturais roliços perfilados de Amaru

The study of physical and mechanical properties of wood is essential for its structural use and it is of great importance to the construction industry. Thus, this study aimed to determine the physical and mechanical properties of the wood Amaru - a hybrid of Eucalyptus, developed by Plantar Projects and Forest Products Ltda. In order to determine the properties of Amaru, round samples were used, which were provided to the Laboratory of Wood and Wooden Structures of the School of Engineering of São Carlos, University of São Paulo - LaMEM / EESC / USP. For the characterization of the physical properties, the apparent specific gravity and moisture content of the samples were determined. To the mechanical characterization, the following properties were evaluated: strength and stiffness in compression, strength and stiffness in bending, shear and tension. The procedures of the tests performed in this study were done according to the recommendations of the Brazilian Wood Standard ABNT NBR 7190:1997. The specimen used were confectioned in actual dimensions, according to as those used in the construction system proposed by Plantar. The results obtained from the tests performed showed that the mechanical properties approached the values proposed by the Wood Standard NBR 7190. The visual grading was important to provide a primary idea about the failure modes to be obtained from the tests performed. The bending test showed the modulus of elasticity (MOE) and Modulus of Rupture (MOR), which resulted in 15822 MPa and 101,7 MPa, respectively. The compression test resulted in values Ec0,m and fc0, 15698 MPa and 50,7 MPa. The tensile strength (ft0) of this hybrid was calculated and its value obtained was 60,8 MPa. The shear strength (fv0) was 8,2 MPa. The results obtained from the tests are the basis for engineers and architects to design structures using wood species Amaru

Dipolo e escoamento uniforme: escoamento em torno de um cilindro circular

The study of movements of ideals fluids is more simple that the viscous fluids because do not have the presence of tension of shear. The normal tensions are the one that must be considered in this analysis. The theory corresponding to these flows is the same used in other fields of the physics called Theory of Potentials Fields, which the vector identity is fundamental. Any flow into irrotational (null vorticity) physically possibly has a current function and a potential of velocity that satisfied the equation of Laplace. Reciprocally, any solution of equation of Laplace represents a current function or a potential of velocity of a flow into physically possible. Once the equation of Laplace is linear, the addiction of any numbers of solutions is also a solution. So, several potentials flows into can be constructed superposing configurations of elementary flows into. The purpose of the superposition of elementary flows into is a production of similar configurations to those of practical interest. The combination of mathematical elegancy with utility in the potential flow into attracted many for its study. Some of the most famous mathematician of history studied the theory and application of “hydrodynamic”, how was called the potential fluid into before 1900

Caracterização estrutural da Zona de Falha da Cachoeira

Este trabalho apresenta a Caracterização Estrutural da Zona de Falha da Cachoeira na região compreendida entre as cidades de Jundiaí e Monte Mor no estado de São Paulo. A Zona da Falha da Cachoeira constitui um importante alinhamento estrutural de direção NW no Embasamento Cristalino e adentra-se no mesmo sentido na Bacia do Paraná afetando os sedimentos paleozóicos. Para a investigação da Zona de Falha foi necessária a definição das características geológico-estruturais e tectônicas da área. As análises macro e mesoscópicas indicam forte estruturação de relevo e dos alinhamentos de drenagem para direção NW-SE e subordinadamente para NE-SW. A zona de falha é marcada pela presença de rochas com texturas miloniticas, cataclásticas e trama de cristais isorientados não deformados. Falhas normais, transcorrentes dextrais, sinistrais foram identificadas e suas análises permitiram inferir um quadro evolutivo para a zona da Falha da Cachoeira, onde as falhas de direções NW-SE antigas relacionadas à paleotectônica e a formação das rochas miloniticas e cataclásticas , as NE-SW aos falhamentos normais da tectônica distensiva do sistema rifts do Sudeste Brasileiro que geraram os depósitos terciários e as falhas normais NW-SE a aos movimentos transcorrentes neotectônicos.

SIG e álgebra de mapas na elaboração de um mapa de potencial de erosão em áreas de silvicultura

Cette étude visait à générer une carte du potentiel d'érosion pour la Ferme Santa Edwirges, située à Lorena /SP. Les résultats ont etés classifiés en faible, modéré, élève et très élève potentiel d'érosion et la carte obtenue a été comparé par rapport aux autres cartes existantes pour la zone d'étude. La méthodologie proposée se basant sur une application qualitative simple L’équation Universelle de Perte de Sol (USLE ou EUPS), en considérant les parties de l'équation: érodibilité, la topographie et l'utilisation des terres. Les donnés ont etés intégrés par l'algèbre de carte dans l’environnement SIG de ArcGIS. Pour la représentation de chacune de ces parcelles, nous avons utilisé une carte des formations superficielles de la ferme, généré à partir d'une ré-interprétation de la carte géologique, une carte de la pente et une carte d'utilisation des terres, attribuant un poids d’important pour chaque catégorie de ces cartes dans le processus d'érosion et dans l'algèbre proposée. Les résultats obtenus sont compatibles avec les zones identifiées comme les plus critiques sur terrain. La ferme a été identifiée comme de potentiel d'érosion modérée et la partie sud de la ferme le plus critique, suivi du groupe conduit par la zone de cisaillement, par contre les plaines proches des rivières ont eté identifié comme la zone plus stable avec moins de potentiel d'érosionDe la comparaison des résultats de ce travail et d'autres qui ont fait antérieurement dans la zone d’intéresse, qui ont utilisé les paramètres géotechniques dans la représentation de l'érosivité des sols, nous avons pu voir des résultats similaires, en particulier dans les zones à potentiel élevé et faible pour l'érosion. De la discussion et analyse des résultats, la méthodologie proposée à eté validée