汽车覆盖件模具激光表面强化中环带区域的测量及轨迹规划

在模具表面激光强化中,测量及轨迹规划是工艺实现的关键环节。本文针对汽车覆盖件模具表面较为常见的侧壁结构,从中抽取出更为基本的一类型面—环带,提出了一种基于特征线的环带测量及轨迹规划的方法，并且在建立环带数学模型的基础上对误差进行了分析,证明了这种方法不仅简单、高效,而且满足相应的加工工艺要求。

神经网络在覆盖件模具表面激光硬化虚拟过程中的应用

基于人工神经网络技术对覆盖件模具表面激光硬化虚拟过程的仿真建模,结合几何因素分析了模型的主要影响参数,对BP网络的结构和训练进行了说明。预测了激光表面硬化的加工效果 (表面硬度、硬化层深、相对耐磨性和表面粗糙度),实现激光加工工艺参数的优化,为实际生产和加工提供了依据。并以C语言为开发语言,利于实现各平台间的集成。

汽车模具棱边的三维自适应测量及六维加工轨迹划分

针对大型汽车冲压模具棱边数字化的问题提出了三维自适应测量算法。为满足激光表面强化加工的特殊要求，在后续测量数据处理过程中建立了复杂棱边的简单模型，提出了六维加工轨迹划分算法，并对算法进行了加工实验验证。所提出的算法已应用到集成化柔性激光加工系统中。

Comparison-speed liquid jets

The performance of a small high-speed liquid jet apparatus is described. Water jets with velocities from 200 to 700 m/s were obtained by firing a deformable lead slug from an air rifle into a stainless steel nozzle containing water sealed with a rubber diaphragm. Nozzle devices using the impact extrusion (IE) and cumulation (CU) methods were designed to generate the jets. The effect of the nozzle diameter and the downstream distance on the jet velocity is examined. The injection sequences are visualized using both shadowgraphy and schlieren photography. The difference between the IE and CU methods of jet generation is found.

Non-die explosive forming of spherical pressure-vessels

This paper presents a newly developed method of manufacturing spherical pressure vessels based on the technology of non-die explosive forming. Compared with the traditional method, this technology does not need any dies and pressing equipment, so that the cost of the production process can be greatly reduced, especially for vessels of less than 100 m3 capacity.

喷射成形工艺参数及热挤压制度对8009耐热铝合金的组织及性能的影响

采用喷射成形方法制备了Al-8.5Fe-1.4V-1.7Si(8009)耐热铝合金，研究了喷射成形工艺参数及沉积坯件的热挤压工艺对材料的微观组织及性能的影响。结果表明：喷射成形工艺能够有效地抑制8009合金中粗大的富铁相的析出，获得均匀细小的组织；当射成形工艺参数选择适当时，沉积坯件具有良好的成形性与致密度，在随后的热挤压过程中，通过较低的挤压比即可使材料达到全致密。合金经过热挤压后，在室温及高温下均具有良好的力学性能。

Digitized Processing Track Generation of a Computer Integrated Multi-Functional 5-Axis Laser Processing System

Based on the computer integrated and flexible laser processing system, an intelligent measuring sub-system was developed. A novel model has been built up to compensate the deviations of the main frame-structure, and a new 3-D laser tracker system is applied to adjust the accuracy of the system. To analyze the characteristic of all kind surfaces of automobile outer penal moulds and dies, classification of types of the surface、brim and ridge(or vale) area to be measured and processed has been established, resulting in one of the main processing functions of the laser processing system. According to different type of surfaces, a 2-D adaptive measuring method based on B?zier curve was developed; furthermore a 3-D adaptive measuring method based on Spline curve was also developed. According to the laser materials processing characteristics and data characteristics, necessary methods have been developed to generate processing tracks, they are explained in details. Measuring experiments and laser processing experiments were carried out to testify the above mentioned methods, which have been applied in the computer integrated and flexible laser processing system developed by the Institute of Mechanics, CAS.

Performance of a small high-speed liquid jet apparatus

The performance of a small high-speed liquid jet apparatus is described. Water jets of 200m/s to 700m/s have been obtained by firing a deformable lead slug from an air rifle into a stainless steel nozzle containing water sealed with a rubber diaphragm. Nozzle devices of using the impact extrusion (IE) method and cumulation (CU) method are designed to generate jets. The injection sequences are visualized using schlieren photography. The difference between the IE and CU methods in the jet generation is found.

The Intelligent Measuring Sub-System in the Computer Integrated and Flexible Laser Processing System

Based on the computer integrated and flexible laser processing system, develop the intelligent measuring sub-system. A novel model has been built to compensate the deviations of the main frame, a new-developed 3-D laser tracker system is applied to adjust the accuracy of the system. Analyzing the characteristic of all kinds of automobile dies, which is the main processing object of the laser processing system, classify the types of the surface and border needed to be measured and be processed. According to different types of surface and border, develop 2-D adaptive measuring method based on B?zier curve and 3-D adaptive measuring method based on spline curve. During the data processing, a new 3-D probe compensation method has been described in details. Some measuring experiments and laser processing experiments are carried out to testify the methods. All the methods have been applied in the computer integrated and flexible laser processing system invented by the Institute of Mechanics, CAS.

塑性力学和细观力学文集

Nährstoff-Einträge aus der deutschen Aquakultur in die Ostsee

Es gibt vier bzw. fünf große Gewässereinzugsgebiete mit Bedeutung für die Fischzucht. Dies sind die Donau mit ihrem Abfluß in das Schwarze Meer, Rhein, Weser und Elbe, die in die Nordsee entwässern sowie die Oder, die in die Ostsee mündet. Daneben gibt es noch einige weitere kleinere Flüsse von Nordwesten bis Nordosten Deutschlands, die in Nordsee (z. B. Eider, Stör) oder Ostsee (z. B. Stebnitz) fließen und das Ablaufwasser von Fischzuchten transportieren können.

27. Jahrestagung der WEFTA (Western European Fish Technologists’ Association)

Die 27. Jahrestagung der WEFTA fand vom 20.-22.10.1997 in Madrid, Spanien, statt. Organisiert wurde diese WEFTA-Tagung von J. Boderias und den Mitarbeitern des Instituto des Frio in Madrid. Das Interesse an dieser WEFTA-Tagung war besonders groß, dies zeigte sich insbesondere an der Anzahl der angemeldeten Vorträge und Poster sowie an den ca. 130 gemeldeten Teilnehmern aus 16 WEFTA - Mitgliedstaaten und Gästen aus den USA, Argentinien, Israel, Lettland, Mexiko und Venezuela.

Comparison of extruded and non-extruded soy meals in the diet of genetically improved mudfish Heterobranchus longifilis juveniles

Raw soybeans were subjected to three different processing methods viz Parboiling, Toasting and Extrusion with an Intra Pro Extruder. The processed soybean meals were thereafter incorporated at equal levels into the diets of genetically improved mudfish Heterobranchus longifilis juveniles. The fish were fed the experimental diets in triplicate at 5% of their body weight for eight weeks. The growth performance and food utilization indices, namely Mean Weight Gain (MWG), Food Conversion Ratio (FCR), Specific Growth Rate (SGR%) and Protein Efficient Ratio (PER), were monitored bi-weekly. The results show that fish fed the control fishmeal diets were highest in growth performance, which was significantly different (P>0.05) from others. Among the fish fed the test diets, those fed toasted soybean had higher MWG, SGR, FCR and PER than juveniles fed the parboiled soybean diet. The juveniles fed the extruded soybean diet recorded the least growth performance. The implication of these results in diet formulation is discussed

Earthquake geology of Myanmar

This thesis describes the active structures of Myanmar and its surrounding regions, and the earthquake geology of the major active structures. Such investigation is needed urgently for this rapidly developing country that has suffered from destructive earthquakes in its long history. To archive a better understanding of the regional active tectonics and the seismic potential in the future, we utilized a global digital elevation model and optical satellite imagery to describe geomorphologic evidence for the principal neotectonic features of the western half of the Southeast Asia mainland. Our investigation shows three distinct active structural systems that accommodate the oblique convergence between the Indian plate and Southeast Asia and the extrusion of Asian territory around the eastern syntaxis of the Himalayan mountain range. Each of these active deformation belts can be further separated into several neotectonic domains, in which structures show distinctive active behaviors from one to another.

In order to better understand the behaviors of active structures, we focused on the active characteristics of the right-lateral Sagaing fault and the oblique subducting northern Sunda megathrust in the second part of this thesis. The detailed geomorphic investigations along these two major plate-interface faults revealed the recent slip behavior of these structures, and plausible recurrence intervals of major seismic events. We also documented the ground deformation of the 2011 Tarlay earthquake in remote eastern Myanmar from remote sensing datasets and post-earthquake field investigations. The field observation and the remote sensing measurements of surface ruptures of the Tarlay earthquake are the first study of this kind in the Myanmar region.

Random propagation in complex systems : nonlinear matrix recursions and epidemic spread

This dissertation studies long-term behavior of random Riccati recursions and mathematical epidemic model. Riccati recursions are derived from Kalman filtering. The error covariance matrix of Kalman filtering satisfies Riccati recursions. Convergence condition of time-invariant Riccati recursions are well-studied by researchers. We focus on time-varying case, and assume that regressor matrix is random and identical and independently distributed according to given distribution whose probability distribution function is continuous, supported on whole space, and decaying faster than any polynomial. We study the geometric convergence of the probability distribution. We also study the global dynamics of the epidemic spread over complex networks for various models. For instance, in the discrete-time Markov chain model, each node is either healthy or infected at any given time. In this setting, the number of the state increases exponentially as the size of the network increases. The Markov chain has a unique stationary distribution where all the nodes are healthy with probability 1. Since the probability distribution of Markov chain defined on finite state converges to the stationary distribution, this Markov chain model concludes that epidemic disease dies out after long enough time. To analyze the Markov chain model, we study nonlinear epidemic model whose state at any given time is the vector obtained from the marginal probability of infection of each node in the network at that time. Convergence to the origin in the epidemic map implies the extinction of epidemics. The nonlinear model is upper-bounded by linearizing the model at the origin. As a result, the origin is the globally stable unique fixed point of the nonlinear model if the linear upper bound is stable. The nonlinear model has a second fixed point when the linear upper bound is unstable. We work on stability analysis of the second fixed point for both discrete-time and continuous-time models. Returning back to the Markov chain model, we claim that the stability of linear upper bound for nonlinear model is strongly related with the extinction time of the Markov chain. We show that stable linear upper bound is sufficient condition of fast extinction and the probability of survival is bounded by nonlinear epidemic map.