Assessment of a strategy for the control of respiratory diseases in children

A programme for the control of respiratory diseases in children was conceived for the State of S. Paulo, Brazil, in 1986. Its progress thereafter and the epidemiology of the diseases concerned are examined. Apart from an inquiry into the 64 existing State local health authorities, a sample of 18,255 cases of children assisted by the programme at different levels, including both in-patient and outpatient care, is analysed. Each case record included information about identification (child, doctor and health facility), reasons for calling, diagnoses made and outcome of treatment. Further data were also sought from hospitals and from State mortality records. The programme was found to be poorly implemented in the State but, where implemented, it showed itself capable of resolving problems (only 0.5% of the cases could not be handled) as also of changing ongoing trends (more than 50% reduction in hospital admission rates). Individual assessment of each item of the programme indicated its bottlenecks. Regarding the epidemiology of respiratory diseases, it is observed that the major burden to health services comes from children aged less than five, and that the most important diseases are wheezing illnesses and pneumonia. Morevoer, they were found to be significantly associated (p = 0.000) so that a child in the community presenting wheezing diseases is 5 times more likely to develop pneumonia than a child with any other respiratory diagnosis. Similarly, among the under five deaths it was found that the risk for pneumonia is 3 times greater for children who died presenting wheezing diseases than it is for children with any other sort of diagnosis. In conclusion, the programme is deemed to be efficient and effective but its efficacy is marred by administrative flaws. The successful control of respiratory problems in childhood is related to a proper appreciation of the importance of wheezing diseases.

Modeling, control and simulation of full-power converter wind turbines equipped with permanent magnet synchronous generator

In this paper, two wind turbines equipped with a permanent magnet synchronous generator (PMSG) and respectively with a two-level or a multilevel converter are simulated in order to access the malfunction transient performance. Three different drive train mass models, respectively, one, two and three mass models, are considered in order to model the bending flexibility of the blades. Moreover, a fractional-order control strategy is studied comparatively to a classical integer-order control strategy. Computer simulations are carried out, and conclusions about the total harmonic distortion (THD) of the electric current injected into the electric grid are in favor of the fractional-order control strategy.

Power converter topologies for wind energy conversion systems: Integrated modeling, control strategy and performance simulation

This paper presents new integrated model for variable-speed wind energy conversion systems, considering a more accurate dynamic of the wind turbine, rotor, generator, power converter and filter. Pulse width modulation by space vector modulation associated with sliding mode is used for controlling the power converters. Also, power factor control is introduced at the output of the power converters. Comprehensive performance simulation studies are carried out with matrix, two-level and multilevel power converter topologies in order to adequately assert the system performance. Conclusions are duly drawn.

A Pitch Control Malfunction Analysis for Wind Turbines with Permanent Magnet Synchronous Generator and Full-power Converters: Proportional Integral Versus Fractional-order Controllers

A transient analysis for two full-power converter wind turbines equipped with a permanent magnet synchronous generator is studied in this article, taking into consideration, as a new contribution to earlier studies, a pitch control malfunction. The two full-power converters considered are, respectively, a two-level and a multi-level converter. Moreover, a novel control strategy based on fractional-order controllers for wind turbines is studied. Simulation results are presented; conclusions are in favor of the novel control strategy, improving the quality of the energy injected into the electric grid.

Risk factors for basal cell carcinoma: a case-control study

A controlled trial was performed with the purpose of investigating which factors could be considered of significant risk for the development of basal cell carcinoma. A total of 259 cases of basal cell carcinoma diagnosed from July 1991 to July 1992 were compared with 518 controls matched for age and sex. All subjects in both groups were white. Protocol data were submitted to statistical analysis by the chi-square test and by multiple conditional logistic regression analysis and the following conclusions were reached: 1) light skin color (types I and II of the Fitzpatrick classification), odds ratio of 2.8; outdoor work under constant sunlight, odds ratio of 5.0; the presence of actinic lesions due to exposure to the sun, odds ratio of 4.9, are risk factors perse. 2) Type III skin in the Fitzpatrick classification only represents a risk factor when the patient reports a history of intense sunburns, but not in the absence of such a history. 3) Sunburns per se do not represent a risk factor althorig the point made in item 2 of these conclusions is valid. 4) Other suspected risk factors whose significance was not confirmed by multiple conditioned logistic regression analysis were: residence in rural areas, light eyes and blond hair color, extent of the awareness of the "sun x skin cancer" relationship, familial occurrence of skin cancer, excessive exposure to the sun, and freckles appearing in childhood.

WPAC: wireless payment and access control: dispositivos móveis no pagamento de serviços e controlo de acessos

A rápida evolução dos dispositivos móveis e das tecnologias de comunicação sem fios transformou o telemóvel num poderoso dispositivo de computação móvel. A necessidade de estar sempre contactável, comum à civilização moderna, tem aumentado a dependência deste dispositivo, sendo transportado pela maioria das pessoas num ambiente urbano e assumindo um papel talvez mais importante que a própria carteira. A ubiquidade e capacidade de computação dos telemóveis aumentam o interesse no desenvolvimento de serviços móveis, além de tradicionais serviços de voz. Um telemóvel pode em breve tornar-se um elemento activo nas nossas tarefas diárias, servindo como um instrumento de pagamento e controlo de acessos, proporcionando assim novas interfaces para serviços existentes. A unificação de vários serviços num único dispositivo é um desafio que pode simplificar a nossa rotina diária e aumentar o conforto, no limite deixaremos de necessitar de dinheiro físico, cartões de crédito ou débito, chaves de residência e de veículos automóveis, ou inclusive documentos de identificação como bilhetes de identidade ou passaportes. O interesse demonstrado pelos intervenientes, desde os fabricantes de telemóveis e operadores de rede móvel até às instituições financeiras, levaram ao aparecimento de múltiplas soluções de serviços móveis. Porém estas soluções respondem geralmente a problemas específicos, apenas contemplando um fornecedor de serviços ou uma determinada operação de pagamento, como seja a compra de bilhetes ou pagamento de estacionamento. Estas soluções emergentes consistem também tipicamente em especificações fechadas e protocolos proprietários. A definição de uma arquitectura genérica, aberta interoperável e extensível é necessária para que os serviços móveis possam ser adoptados de uma forma generalizada por diferentes fornecedores de serviços e para diversos tipos de pagamento. A maior parte das soluções actuais de pagamento móvel depende de comunicações através da rede móvel, algumas utilizam o telemóvel apenas como uma interface de acesso à internet enquanto outras possibilitam o envio de um SMS (Short Message Service) para autorizar uma transacção, o que implica custos de comunicação em todas as operações de pagamento. Este custo de operação torna essas soluções inadequadas para a realização de micropagamentos e podem por isso ter uma aceitação limitada por parte dos clientes. As soluções existentes focam-se maioritariamente em pagamentos à distância, não tirando partido das características do pagamento presencial e não oferecendo por isso uma verdadeira alternativa ao modelo actual de pagamento com cartões de crédito/débito. As capacidades computacionais dos telemóveis e suporte de diversos protocolos de comunicação sem fio local não têm sido aproveitadas, vendo o telemóvel apenas como um terminal GSM (Global System for Mobile Communications) e não oferecendo serviços adicionais como seja a avaliação dinâmica de risco ou controlo de despesas. Esta dissertação propõe e valida, através de um demonstrador, uma aquitectua aberta para o pagamento e controlo de acesso baseado em dispositivos móveis, intitulada WPAC (Wireless Payment and Access Control). Para chegar à solução apresentada foram estudadas outras soluções de pagamento, desde o aparecimento dos cartões de débito até a era de pagamentos electrónicos móveis, passando pelas soluções de pagamento através da internet. As capacidades dos dispositivos móveis, designadamente os telemóveis, e tecnologias de comunicação sem fios foram também analisadas a fim de determinar o estado tecnológico actual. A arquitectura WPAC utiliza padrões de desenho utilizados pela indústria em soluções de sucesso, a utilização de padrões testados e a reutilização de soluções com provas dadas permite aumentar a confiança nesta solução, um destes exemplos é a utilização de uma infra-estrutura de chave pública para o estabelecimento de um canal de comunicação seguro. Esta especificação é uma arquitectura orientada aos serviços que utiliza os Web Services para a definição do contracto do serviço de pagamento. A viabilidade da solução na orquestração de um conjunto de tecnologias e a prova de conceito de novas abordagens é alcançada com a construção de um protótipo e a realização de testes. A arquitectura WPAC possibilita a realização de pagamentos móveis presenciais, isto é, junto do fornecedor de bens ou serviços, seguindo o modelo de pagamento com cartões de crédito/débito no que diz respeito aos intervenientes e relações entre eles. Esta especificação inclui como aspecto inovador a avaliação dinâmica de risco, que utiliza o valor do pagamento, a existência de pagamentos frequentes num período curto de tempo, e a data, hora e local do pagamento como factores de risco; solicitando ao cliente o conjunto de credenciais adequado ao risco avaliado, desde códigos pessoais a dados biométricos. É também apresentada uma alternativa ao processo normal de pagamento, que apesar de menos cómoda permite efectuar pagamentos quando não é possível estabelecer um canal de comunicação sem fios, aumentando assim a tolerância a falhas. Esta solução não implica custos de operação para o cliente na comunicação com o ponto de venda do comerciante, que é realizada através de tecnologias de comunicação local sem fios, pode ser necessária a comunicação através da rede móvel com o emissor do agente de pagamento para a actualização do agente de software ou de dados de segurança, mas essas transmissões são ocasionais. O modelo de segurança recorre a certificados para autenticação dos intervenientes e a uma infra-estrutura de chave pública para cifra e assinatura de mensagens. Os dados de segurança incluídos no agente de software móvel, para desabilitar a cópia ou corrupção da aplicação mas também para a comparação com as credenciais inseridas pelo cliente, devem igualmente ser encriptados e assinados de forma a garantir a sua confidencialidade e integridade. A arquitectura de pagamento utiliza o standard de Web Services, que é amplamente conhecido, aberto e interoperável, para definição do serviço de pagamento. Existem extensões à especificação de Web Services relativas à segurança que permitem trocar itens de segurança e definem o modo de cifra e assinatura de mensagens, possibilitando assim a sua utilização em aplicações que necessitem de segurança como é o caso de serviços de pagamento e controlo de acesso. O contracto de um Web Service define o modo de invocação dos serviços, transmissão de informação e representação de dados, sendo normalmente utilizado o protocolo SOAP que na prática não é mais que um protocolo de troca de mansagens XML (eXtensible Markup Language). O envio e recepção de mensagens XML; ou seja, a transmissão de simples sequências de caracteres, é suportado pela maioria dos protocolos de comunicação, sendo portanto uma solução abrangente que permite a adopção de diversas tecnologias de comunicação sem fios. O protótipo inclui um agente de software móvel, implementado sobre a forma de uma MIDlet, aplicação Java para dispositivos móveis, que implementa o protocolo de pagamento comunicando sobre uma ligação Bluetooth com o ponto de venda do comerciante, simulado por uma aplicação desenvolvida sobre a plataforma .NET e que por isso faz prova da heterogeneidade da solução. A comunicação entre o comerciante e o seu banco para autorização do pagamento e transferência monetária utiliza o protocolo existente para a autorização de pagamentos, com base em cartões de crédito/débito. A definição desta especificação aberta e genérica em conjunto com o forte interesse demonstrado pelos intervenientes, proporciona uma boa perspectiva em termos de adopção da solução, o que pode impulsionar a implementação de serviços móveis e dessa forma simplificar as rotinas diárias das pessoas. Soluções móveis de pagamento reduzem a necessidade de transportar vários cartões de crédito/débito na nossa carteira. A avaliação dinâmica de risco permite aumentar a segurança dos pagamentos, com a solicitação de mais credenciais ao cliente para pagamentos com um maior risco associado, sendo um ponto importante quer para os clientes quer para as instituições financeiras pois diminui o risco de fraude e aumenta a confiança no sistema. Esta solução de pagamento electrónico pode também facilitar a consulta de pagamentos efectuados e saldos, mantendo um histórico dos movimentos, o que não é possível nos cartões de crédito/débito sem uma visita a uma ATM (Automated Teller Machine) ou utilização de homebanking.

The use of wide-mesh gauze impregnated with lambda-cyhalothrin covering wall openings in huts as a vector control method in Suriname

An alternative vector control method, using lambda-cyhalothrin impregnated wide-mesh gauze covering openings in the walls of the houses was developed in an area in the Eastern part of the interior of Suriname. Experimental hut observations showed that Anopheles darlingi greatly reduced their biting activity (99-100%) during the first 5 months after impregnation. A model assay showed high mortality both of mosquitoes repelled by the gauze as well as of those that succeeded in getting through it. A field application test in 270 huts showed good acceptance by the population and good durability of the applied gauze. After introducing the method in the entire working area, replacing DDT residual housespraying, the malaria prevalence, of 25-37% before application dropped and stabilized at between 5 and 10% within one year. The operational costs were less than those of the previously used DDT housespraying program, due to a 50% reduction in the cost of materials used. The method using widemesh gauze impregnated with lambdacyhalothrin strongly affects the behavior of An. darlingi. It is important to examine the effect of the method on malaria transmission further, since data indirectly obtained suggest substantial positive results.

Evaluation and additional recommendations for preparing a whole blood control material

OBJECTIVE: The assessment of an easy to prepare and low cost control material for Hematology, available for manual and automated methods. MATERIAL AND METHOD: Aliquots of stabilized whole blood were prepared by partial fixation with aldehydes; the stability at different temperatures (4. 20 and 37 °C) during periods of up to 8-9 weeks and aliquot variability with both methods were controlled. RESULTS: Aliquot variability with automated methods at day 1, expressed as CV% (coefficient of variation) was: white blood cells (WBC) 2.7, red blood cells (RBC) 0.7, hemoglobin (Hb) 0.6, hematocrit (Hct) 0.7, mean cell volume (MCV) 0.3, mean cell hemoglobin (MCH) 0.6, mean cell hemoglobin concentration (MCHC) 0.7, and platelets (PLT) 4.6. The CV (coefficient of variation) percentages obtained with manual methods in one of the batches were: WBC 23, Hct 2.8, Hb 4.5, MCHC 5.9, PLT 41. Samples stored at 4ºC and 20ºC showed good stability, only a very low initial hemolysis being observed, whereas those stored at 37ºC deteriobed a rapidly (metahemoglobin formation, aggregation of WBC and platelets, as well as alteration of erythrocyte indexes). CONCLUSIONS: It was confirmed that, as long as there is no exposure to high temperatures during distribution, this material is stable, allowing assessment, both esternal and internal, for control purposes, with acceptable reproductivity, both for manual and auttomatic methods.

Fractional-order control and simulation of wind energy systems with PMSG/full-power converter topology

This paper presents a new integrated model for the simulation of wind energy systems. The proposed model is more realistic and accurate, considering a variable-speed wind turbine, two-mass rotor, permanent magnet synchronous generator (PMSG), different power converter topologies, and filters. Additionally, a new control strategy is proposed for the variable-speed operation of wind turbines with PMSG/full-power converter topology, based on fractional-order controllers. Comprehensive simulation studies are carried out with matrix and multilevel power converter topologies, in order to adequately assert the system performance in what regards the quality of the energy injected into the electric grid. Finally, conclusions are duly drawn.

RFID together with multi-agent systems to control global value chains

Nowadays, the cooperative intelligent transport systems are part of a largest system. Transportations are modal operations integrated in logistics and, logistics is the main process of the supply chain management. The supply chain strategic management as a simultaneous local and global value chain is a collaborative/cooperative organization of stakeholders, many times in co-opetition, to perform a service to the customers respecting the time, place, price and quality levels. The transportation, like other logistics operations must add value, which is achieved in this case through compression lead times and order fulfillments. The complex supplier's network and the distribution channels must be efficient and the integral visibility (monitoring and tracing) of supply chain is a significant source of competitive advantage. Nowadays, the competition is not discussed between companies but among supply chains. This paper aims to evidence the current and emerging manufacturing and logistics system challenges as a new field of opportunities for the automation and control systems research community. Furthermore, the paper forecasts the use of radio frequency identification (RFID) technologies integrated into an information and communication technologies (ICT) framework based on distributed artificial intelligence (DAI) supported by a multi-agent system (MAS), as the most value advantage of supply chain management (SCM) in a cooperative intelligent logistics systems. Logistical platforms (production or distribution) as nodes of added value of supplying and distribution networks are proposed as critical points of the visibility of the inventory, where these technological needs are more evident.

Power Electronics Didactic Modules for Direct Current Machine Control

Several didactic modules for an electric machinery laboratory are presented. The modules are dedicated for DC machinery control and get their characteristic curves. The didactic modules have a front panel with power and signal connectors and can be configurable for any DC motor type. The three-phase bridge inverter proposed is one of the most popular topologies and is commercially available in power package modules. The control techniques and power drives were designed to satisfy static and dynamic performance of DC machines. Each power section is internally self-protected against misconnections and short-circuits. Isolated output signals of current and voltage measurements are also provided, adding versatility for use either in didactic or research applications. The implementation of such modules allowed experimental confirmation of the expected performance.

The impact of family control on firm's return

Family firm is a field of growing interest. The aim of this article is to understand whether CEOs identity impacts family firm’s stock returns. From a sample of Portuguese and Spanish family firms findings show that who manages the firms result in significantly different risk exposure. Moreover, we find that the abnormal return found by Fahlenbrach (2009) to founder-controlled firms disappear when we use valueweighted portfolios and include two new factors: market aggregate illiquidity and debt intensity to the four-factor Carhart model. Finally, our results explain why the majority of family firm is controlled by its founder.

Breast cancer in Mexican women: an epidemiological study with cervical cancer control

INTRODUCTION: In Mexico, breast cancer (BC) is one of the main causes of cancer deaths in women, with increasing incidence and mortality in recent years. Therefore, the aim of the study is identify possible risk factors related to BC. METHODS: An epidemiological study of hospital cases of BC and controls with cervical uterine cancer (CUCA) was carried out at eight third level concentration hospitals in Mexico City. The total of 353 incident cases of BC and 630 controls with CUCA were identified among women younger than 75 years who had been residents of the metropolitan area of Mexico City for at least one year. Diagnosis was confirmed histologically in both groups. Variables were analyzed according to biological and statistical plausibility criteria. Univariate, bivariate and multivariate analyses were carried out. Cases and controls were stratified according to the menopausal hormonal status (pre and post menopause). RESULTS: The factors associated with BC were: higher socioeconomic level (OR= 2.77; 95%CI = 1.77 - 4.35); early menarche (OR= 1.32; 95%CI= 0.88 - 2.00); old age at first pregnancy (>31 years: OR= 5.49; 95%CI= 2.16 - 13.98) and a family history of BC (OR= 4.76; 95% CI= 2.10 - 10.79). In contrast, an increase in the duration of the breastfeeding period was a protective factor (>25 months: OR= 0.38; 95%CI= 0.20 - 0.70). CONCLUSIONS: This study contributes to the identification of risk factors for BC described in the international literature, in the population of Mexican women. Breastfeeding appears to play an important role in protecting women from BC. Because of changes in women`s lifestyles, lactation is decreasing in Mexico, and young women tend not to breastfeed or to shorten the duration of lactation.

Hospital visitors as controls in case-control studies

OBJECTIVE: Selecting controls is one of the most difficult tasks in the design of case-control studies. Hospital controls may be inadequate and random controls drawn from the base population may be unavailable. The aim was to assess the use of hospital visitors as controls in a case-control study on the association of organochlorinated compounds and other risk factors for breast cancer conducted in the main hospital of the "Instituto Nacional de Câncer" -- INCA (National Cancer Institute) in Rio de Janeiro (Brazil). METHODS: The study included 177 incident cases and 377 controls recruited among female visitors. Three different models of control group composition were compared: Model 1, with all selected visitors; Model 2, excluding women visiting relatives with breast cancer; and Model 3, excluding all women visiting relatives with any type of cancer. Odds ratios (OR) and 95% confidence intervals were calculated to test the associations. RESULTS: Age-adjusted OR for breast cancer associated with risk factors other than family history of cancer, except smoking and breast size, were similar in the three models. Regarding family history of all cancers, except for breast cancer, there was a decreased risk in Models 1 and 2, while in Model 3 there was an increased risk, but not statistically significant. Family history of breast cancer was a risk factor in Models 2 and 3, but no association was found in Model 1. In multivariate analysis a significant risk of breast cancer was found when there was a family history of breast cancer in Models 2 and 3 but not in Model 1. CONCLUSIONS: These results indicate that while investigating risk factors unrelated to family history of cancer, the use of hospital visitors as controls may be a valid and feasible alternative.

A new control strategy with saturation effect compensation for an autonomous induction generator drivenby wide speed range turbines

This paper presents a variable speed autonomous squirrel cage generator excited by a current-controlled voltage source inverter to be used in stand-alone micro-hydro power plants. The paper proposes a system control strategy aiming to properly excite the machine as well as to achieve the load voltage control. A feed-forward control sets the appropriate generator flux by taking into account the actual speed and the desired load voltage. A load voltage control loop is used to adjust the generated active power in order to sustain the load voltage at a reference value. The control system is based on a rotor flux oriented vector control technique which takes into account the machine saturation effect. The proposed control strategy and the adopted system models were validated both by numerical simulation and by experimental results obtained from a laboratory prototype. Results covering the prototype start-up, as well as its steady-state and dynamical behavior are presented. (C) 2011 Elsevier Ltd. All rights reserved.