An investigation of the influence of process and formulation variables on mechanical properties of high shear granules using design of experiment

Being able to predict the properties of granules from the knowledge of the process and formulation variables is what most industries are striving for. This research uses experimental design to investigate the effect of process variables and formulation variables on mechanical properties of pharmaceutical granules manufactured from a classical blend of lactose and starch using hydroxypropyl cellulose (HPC) as the binder. The process parameters investigated were granulation time and impeller speed whilst the formulation variables were starch-to-lactose ratio and HPC concentration. The granule properties investigated include granule packing coefficient and granule strength. The effect of some components of the formulation on mechanical properties would also depend on the process variables used in granulation process. This implies that by subjecting the same formulation to different process conditions results in products with different properties. © 2012 Elsevier B.V. All rights reserved.

Effect of impeller speed on mechanical and dissolution properties of high-shear granules

Impeller speed is one of the most crucial process variables that affect the properties of the granules produced in a high-shear granulator. Several reports can be found in literature that discuss the influence of impeller speed on the granules size. For instance some researchers like Knight report an increase of granule size with impeller speed [1] and [2], while others (Scheaefer et al. and Ramaker et al.) observed a decrease of granules size with increasing impeller speed [3] and [4]. However there is limited work reported in literature on the effect of the impeller speed on the mechanical properties of granules. Mechanical properties are important as they affect the performance of the granules on the other downstream process such as transportation and handling. The work reported here serves to address the missing in knowledge gap regarding the influence of impeller speed on mechanical properties granules. How the granulation system responds to the changes in the impeller speeds depends on binder that is used in the process. For this reason the two extreme cases, of a low viscosity binder system and high viscosity binder system are considered in this research. For low viscosity binder system it was observed that the granule size decreased with increasing impeller speed whilst for the high viscosity binder system the opposite was observed by Knight [1]. The granule strength, the Young's modulus and yield strength of the high viscosity granules increased with increasing impeller speed where as the opposite trends were observed for the low viscosity binder granules.

NONLINEAR NUMERICAL MODELLING OF LIGHTENING STRIKE EFFECT ON COMPOSITE PANELS WITH TEMPERATURE DEPENDANT MATERIAL PROPERTIES

Lightning strike is one of the challenges that the aerospace industry is facing in an effort to increase the percentage of composite materials used in aircraft structures. Lightning strike damage is due to high orthotropic electric resistivity of the composite panels, which leads to high thermal loads that cause decomposition of the epoxy and delimitations of the laminates. Yet, experimental testing of lightning strike on aircraft panels is expensive due to the large number of design parameters that can control the inflicted damage. A coupled thermal-electrical finite element analysis is used to investigate the design variables space that can affect lightning strike damage on epoxy/graphite composite panels. The contribution of this study is modeling the composite panels’ material properties as temperature dependent, which was excluded by other researchers. A number of practical solutions to minimize the damage effect are proposed. Two set of experimental results are used to verify the numerical ones. One experimental set for plain composite panel, and second one for composite panels with joints

Psychological responses after a major fatal earthquake: The effect of preitraumatic dissociation and posttraumatic stress symptoms on anxiety and depression.

Following trauma, most people with initial symptoms of stress recover, but it is important to identify those at risk for continuing difficulties so resources are allocated appropriately. There has been limited investigation of predictors of posttraumatic stress disorder following natural disasters. This study assessed psychological difficulties experienced in 101 adult treatment seekers following exposure to a significant earthquake. Peritraumatic dissociation, posttraumatic stress symptoms, anxiety, depression, and emotional support were assessed. Path analysis was used to determine whether the experience of some psychological difficulties predicted the experience of other difficulties. As hypothesized, peritraumatic dissociation was found to predict posttraumatic stress symptoms and anxiety. Posttraumatic stress symptoms then predicted anxiety and depression. Depression and anxiety were highly correlated. Contrary to expectations, emotional support was not significantly related to other psychological variables. These findings justify the provision of psychological support following a natural disaster and suggest the benefit of assessing peritraumatic dissociation and posttraumatic stress symptoms soon after the event to identify people in need of monitoring and intervention.

Effect of cooking method and rice type on arsenic concentration in cooked rice and the estimation of arsenic dietary intake in a rural village in West Bengal, India

Arsenic (As) contamination of rice plants can result in high total As concentrations (t-As) in cooked rice, especially if As-contaminated water is used for cooking. This study examines two variables: (1) the cooking method (water volume and inclusion of a washing step); and (2) the rice type (atab and boiled). Cooking water and raw atab and boiled rice contained 40 g As l-1 and 185 and 315 g As kg-1, respectively. In general, all cooking methods increased t-As from the levels in raw rice; however, raw boiled rice decreased its t-As by 12.7% when cooked by the traditional method, but increased by 15.9% or 23.5% when cooked by the intermediate or contemporary methods, respectively. Based on the best possible scenario (the traditional cooking method leading to the lowest level of contamination, and the atab rice type with the lowest As content), t-As daily intake was estimated to be 328 g, which was twice the tolerable daily intake of 150 g.

A unified view on the effect of fibers and loading on sfrc creep through linear projection to latent structures

Creep of Steel Fiber Reinforced Concrete (SFRC) under flexural loads in the cracked state and to what extent different factors determine creep behaviour are quite understudied topics within the general field of SFRC mechanical properties. A series of prismatic specimens have been produced and subjected to sustained flexural loads. The effect of a number of variables (fiber length and slenderness, fiber content, and concrete compressive strength) has been studied in a comprehensive fashion. Twelve response variables (creep parameters measured at different times) have been retained as descriptive of flexural creep behaviour. Multivariate techniques have been used: the experimental results have been projected to their latent structure by means of Principal Components Analysis (PCA), so that all the information has been reduced to a set of three latent variables. They have been related to the variables considered and statistical significance of their effects on creep behaviour has been assessed. The result is a unified view on the effects of the different variables considered upon creep behaviour: fiber content and fiber slenderness have been detected to clearly modify the effect that load ratio has on flexural creep behaviour.

Variables to be considered when assessing the photocatalytic destruction of bacterial pathogens

The current study sought to assess the importance of three common variables on the outcome of TiO₂ photocatalysis experiments with bacteria. Factors considered were (a) ability of test species to withstand osmotic pressure, (b) incubation period of agar plates used for colony counts following photocatalysis and (c) chemical nature of suspension medium used for bacteria and TiO₂. Staphylococcus aureus, Escherichia coli, Salmonella ser. Typhimurium and Pseudomonas aeruginosa were found to vary greatly in their ability to withstand osmotic pressure, raising the possibility that osmotic lysis may be contributing to loss of viability in some photocatalytic disinfection studies. Agar plate incubation time was also found to influence results, as bacteria treated with UV light only grew more slowly than those treated with a combination of UV and TiO_2. The chemical nature of the suspension medium used was found to have a particularly pronounced effect upon results. Greatest antibacterial activity was detected when aqueous sodium chloride solution was utilised, with ∼1 × 10⁶ CFU mL^-1 S. aureus being completely killed after 60 min. Moderate activity was observed when distilled water was employed with bacteria being killed after 2 h and 30 min, and no antibacterial activity at all was detected when aqueous tryptone solution was used. Interestingly, the antibacterial activity of UV light on its own appeared to be very much reduced in experiments where aqueous sodium chloride was employed instead of distilled water. 

Latent vs. Observed Variables: Analysis of Irrigation Water Efficiency Using SEM and SUR

In this paper we compare conceptualising single factor technical and allocative efficiency as indicators of a single latent variable, or as separate observed variables. In the former case, the impacts on both efficiency types are analysed by means of structural equation modeling (SEM), in the latter by seemingly unrelated regression (SUR). We compare estimation results of the two approaches based on a dataset on single factor irrigation water use efficiency obtained from a survey of 360 farmers in the Guanzhong Plain, China. The main methodological findings are that SEM allows identification of the most important dimension of irrigation water efficiency (technical efficiency) via comparison of their factor scores and reliability. Moreover, it reduces multicollinearity and attenuation bias. It thus is preferable to SUR. The SEM estimates show that perception of water scarcity is the most important positive determinant of both types of efficiency, followed by irrigation infrastructure, income and water price. Furthermore, there is a strong negative reverse effect from efficiency on perception.

Radiological imaging in digital systems: the effect of exposure parameters in diagnostic quality and patient dose

Esta tese pretende contribuir para o estudo e análise dos factores relacionados com as técnicas de aquisição de imagens radiológicas digitais, a qualidade diagnóstica e a gestão da dose de radiação em sistema de radiologia digital. A metodologia encontra-se organizada em duas componentes. A componente observacional, baseada num desenho do estudo de natureza retrospectiva e transversal. Os dados recolhidos a partir de sistemas CR e DR permitiram a avaliação dos parâmetros técnicos de exposição utilizados em radiologia digital, a avaliação da dose absorvida e o índice de exposição no detector. No contexto desta classificação metodológica (retrospectiva e transversal), também foi possível desenvolver estudos da qualidade diagnóstica em sistemas digitais: estudos de observadores a partir de imagens arquivadas no sistema PACS. A componente experimental da tese baseou-se na realização de experiências em fantomas para avaliar a relação entre dose e qualidade de imagem. As experiências efectuadas permitiram caracterizar as propriedades físicas dos sistemas de radiologia digital, através da manipulação das variáveis relacionadas com os parâmetros de exposição e a avaliação da influência destas na dose e na qualidade da imagem. Utilizando um fantoma contrastedetalhe, fantomas antropomórficos e um fantoma de osso animal, foi possível objectivar medidas de quantificação da qualidade diagnóstica e medidas de detectabilidade de objectos. Da investigação efectuada, foi possível salientar algumas conclusões. As medidas quantitativas referentes à performance dos detectores são a base do processo de optimização, permitindo a medição e a determinação dos parâmetros físicos dos sistemas de radiologia digital. Os parâmetros de exposição utilizados na prática clínica mostram que a prática não está em conformidade com o referencial Europeu. Verifica-se a necessidade de avaliar, melhorar e implementar um padrão de referência para o processo de optimização, através de novos referenciais de boa prática ajustados aos sistemas digitais. Os parâmetros de exposição influenciam a dose no paciente, mas a percepção da qualidade de imagem digital não parece afectada com a variação da exposição. Os estudos que se realizaram envolvendo tanto imagens de fantomas como imagens de pacientes mostram que a sobreexposição é um risco potencial em radiologia digital. A avaliação da qualidade diagnóstica das imagens mostrou que com a variação da exposição não se observou degradação substancial da qualidade das imagens quando a redução de dose é efectuada. Propõe-se o estudo e a implementação de novos níveis de referência de diagnóstico ajustados aos sistemas de radiologia digital. Como contributo da tese, é proposto um modelo (STDI) para a optimização de sistemas de radiologia digital.

Assessing the combined effect of land management and wildfire on runoff and soil erosion in north central Portugal

Strong and sometimes extreme responses in runoff and soil erosion following wildfires have been reported worldwide. However, in the case of North-Central Portugal, little research had been carried out regarding the hydrologic and erosive impacts of several land management activities in recently burnt areas (such as ground preparation, post-fire logging or post-fire mitigation treatments). This study aims to assess post-fire runoff and soil erosion response on Eucalypt and Maritime pine plantations during the first, second and third years following wildfires. The effect of several pre-fire ground preparation operations (ploughed down-slope, contour ploughed and inclined terraces), post-fire logging activities (on both the eucalypt and pine plantations), as well as the application of hydromulch (a post-fire emergency treatment) on overland flow and soil erosion were compared to burnt but undisturbed and untreated areas. The intensive monitoring of runoff, soil erosion and selected soil properties served to determine the main factors involved in post-fire runoff and soil erosion and their spatial and temporal variation. Soil water repellency deserved special attention, due to its supposed important role for overland flow generation. Repeated rainfall simulation experiments (RSE’s), micro-scale runoff plots and bounded sediment fences were carried out and/or installed immediately after the wildfire on seven burnt slopes. Micro-scale runoff plots results under natural rainfall conditions were also compared to the RSE’s results, which was useful for assessing the representativeness of the data obtained with artificial rainfall. The results showed comparable runoff coefficient (20-60%) but lower sediment losses (125-1000 g m-2) than prior studies in Portugal, but especially outside Portugal. Lower sediment losses were related with the historic intensive land use in the area. In evaluating these losses, however, the shallowness and stoniness of the soils, as well as the high organic matter fraction of the eroded sediments (50%) must not be overlooked. Sediment limited erosion was measured in all the ploughed sites, probably due to the time since ploughing (several years). The disturbance of the soil surface cover due to post-fire logging and wood extraction substantially increased sediment losses at both the pine and eucalypt sites. Hydromulch effectiveness in reducing the runoff (70%) and sediment losses (83%) was attributed to the protective high coverage provided by hydromulch. The hydromulch significantly affected the soil cover and other soil properties and these changes also reduced the soil erosion risk. The rainfall amount was the main factor explaining the variance in runoff. However, a shift from rainfall amount to rainfall intensity was detected when either the surface cover or the infiltration capacity (hydrophilic conditions) increased. Sediment losses were controlled by rainfall intensity and surface cover. The role of soil water repellency on runoff generation was not consistent; the overall repellency levels alone were not enough to assess its hydrological impact. Soil water repellency explained runoff generation in the specific-sites model better than in the overall model. Additionally, soil moisture content was a better predictor for soil water repellency than antecedent rainfall. The natural rainfall results confirmed that RSE’s were able to capture the specific sediment losses and its organic matter content as well as the differences between the ploughed and unploughed sites. Repeated RSE’s also captured the seasonal variations in runoff and sediment losses attributed to soil water repellency. These results have implications for post-fire soil erosion modelling and soil conservation practices in the region, or areas with the same land use, climate and soil characteristics. The measured sediment loss, as well as the increasing frequency of ploughing in recently burnt and unburnt eucalypt stands, suggests ploughing is not an effective as a soil conservation measure. Logging activities with less impact are recommended in order to maintain the forest litter protecting the soil surface. Due to its high effectiveness in reducing runoff and soil erosion, hydromulch is recommended for highly sensitive and vulnerable areas.

Influence of environmental variables on the predatory sucess of the iberian wolf in the north of Portugal

Tese de mestrado em Biologia da Conservação, apresentada à Universidade de Lisboa, através da Faculdade de Ciências, 2016

Patterns of cortisol and DHEA secretion and relationships with attachment style and psychosocial variables in female adolescents: a developmental psychopathology approach

This programme of research used a developmental psychopathology approach to investigate females across the adolescent period. A two-sided story is presented; first, a study of neuroendocrine and psychosocial parameters in a group of healthy female adolescents (N = 63), followed by a parallel study of female adolescents with anorexia nervosa (AN) (N = 8). A biopsychosocial, multi-method measurement approach was taken, which utilised self-report, interview and hypothalamic-pituitary-adrenocortical (HPA) axis measures. Saliva samples for the measurement of cortisol and DHEA were collected using the best-recommended methodology: multiple samples over the day, strict reference to time of awakening, and two consecutive sampling weekdays. The research was adolescent-orientated: specifically, by using creative and ageappropriate strategies to ensure participant adherence to protocol, as well as more generally by adopting various procedures to facilitate engagement with the research process. In the healthy females mean (± SD) age 13.9 (± 2.7) years, cortisol and DHEA secretion exhibited typical adult-like diurnal patterns. Developmental markers of chronological age, menarche status and body mass index (BMI) had differential associations with cortisol and DHEA secretory activity. The pattern of the cortisol awakening response (CAR) was sensitive to whether participants had experienced first menses, but not to chronological age or BMI. Those who were post-menarche generally reached their peak point of cortisol secretion at 45 minutes post-awakening, in contrast to the pre-menarche group who were more evenly spread. Subsequent daytime cortisol levels were also higher in post-menarche females, and this effect was also noted for increasing age and BMI. Both morning and evening DHEA were positively associated with developmental markers. None of the situational or self-report psychosocial variables that were measured modulated any of the key findings regarding cortisol and DHEA secretion. The healthy group of girls were within age-appropriate norms for all the self-report measures used, however just under half of this group were insecurely attached (as assessed by interview). Only attachment style was associated with neuroendocrine parameters. In particular, those with an anxious insecure style exhibited a higher awakening sample (levels were 7.16 nmol/l, 10.40 nmol/l and 7.93 nmol/l for secure, anxious and avoidant groups, respectively) and a flatter CAR (mean increases over the awakening period were 6.38 nmol/l, 2.32 nmol/l and 8.61 nmol/l for secure, anxious and avoidant groups, respectively). The afore-mentioned pattern is similar to that consistently associated with psychological disorder in adults, and so this may be a pre-clinical vulnerability factor for subsequent mental health problems. A group of females with AN, mean (± SD) age 15.1 (± 1.6) years, were recruited from a specialist residential clinic and compared to the above group of healthy control (HC) female adolescents. A general picture of cortisol and DHEA hypersecretion was revealed in those with AN. The mean (± SD) change exhibited in cortisol levels over the 30 minute post-awakening period was 7.05 nmol/l (± 5.99) and 8.33 nmol/l (± 6.41) for HC and AN groups, respectively. The mean (± SD) evening cortisol level for the HC girls was 1.95 nmol/l (± 2.11), in comparison to 6.42 nmol/l (± 11.10) for the AN group. Mean (± SD) morning DHEA concentrations were 1.47 nmol/l (± 0.85) and 2.25 nmol/l (± 0.88) for HC and AN groups, respectively. The HC group’s mean (± SD) concentration of 12 hour DHEA was 0.55 nmol/l (± 0.46) and the AN group’s mean level was 0.89 nmol/l (± 0.90). This adrenal steroid hypersecretion evidenced by the AN group was not associated with BMI or eating disorder symptomatology. Insecure attachment characterised by fearfulness and anger was most apparent; a style which was unparalleled in the healthy group of female adolescents. The causal directions of the AN group findings remain unclear. Examining some of the participants with AN as case studies one year post-discharge from the clinic illustrated that for one participant who was recovered, in terms of returning to ordinary school life and no longer exhibiting clinical levels of eating disorder symptomatology, her CARs were no longer inconsistent over sampling days and her DHEA levels were also now generally comparable to the healthy control group. For another participant who had not recovered from her AN one year later, the profile of her CAR continued to be inconsistent over sampling days and her DHEA concentrations over the diurnal period were significantly higher in comparison to the healthy control group. In its entirety, this work’s unique contribution lies in its consideration of methodological and developmental issues specifically pertaining to adolescents. Findings also contribute to knowledge of AN and understanding of vulnerability factors, and how these may be used to develop interventions dedicated to improving adolescent health.

Determinants of reelection in Portuguese municipal elections

This Work Project investigates the determinants of reelection using data on the 278 Portuguese mainland municipalities for the period 1976-2009. We implement a logit fixed effect model to control for the municipalities’ unobserved characteristics that remain constant over time. Political variables, such as the vote share of the incumbent’s party in previous election, the number of mayor’s consecutive mandates and abstention rate, are found to be relevant in explaining incumbent’s reelection. Moreover, as to the mayor’s individual characteristics, age and education contribute to explain reelection prospects. We also provide weak evidence that a higher degree of fiscal autonomy increases political turnover and that the good economic prospects of the municipality positively affect reelection. Finally, the residents’ level of education and the size of the municipal population have an explanatory power on mayor’s reelection. We perform several robustness checks to confirm these results.

The effect of social and environmental sustainability on firm resilience

Double degree

Association between white-coat effect and blunted dipping of nocturnal blood pressure.

In this study, we assessed whether the white-coat effect (difference between office and daytime blood pressure (BP)) is associated with nondipping (absence of BP decrease at night). Data were available in 371 individuals of African descent from 74 families selected from a population-based hypertension register in the Seychelles Islands and in 295 Caucasian individuals randomly selected from a population-based study in Switzerland. We used standard multiple linear regression in the Swiss data and generalized estimating equations to account for familial correlations in the Seychelles data. The prevalence of systolic and diastolic nondipping (<10% nocturnal BP decrease) and white-coat hypertension (WCH) was respectively 51, 46, and 4% in blacks and 33, 37, and 7% in whites. When white coat effect and nocturnal dipping were taken as continuous variables (mm Hg), systolic (SBP) and diastolic BP (DBP) dipping were associated inversely and independently with white-coat effect (P < 0.05) in both populations. Analogously, the difference between office and daytime heart rate was inversely associated with the difference between daytime and night-time heart rate in the two populations. These results did not change after adjustment for potential confounders. The white-coat effect is associated with BP nondipping. The similar associations between office-daytime values and daytime-night-time values for both BP and heart rate suggest that the sympathetic nervous system might play a role. Our findings also further stress the interest, for clinicians, of assessing the presence of a white-coat effect as a means to further identify patients at increased cardiovascular risk and guide treatment accordingly.