912 resultados para Euler angle
Resumo:
PURPOSE:
To assess the knowledge of patients with open angle glaucoma (OAG) and their family members about OAG risk factors and to study the referral of family members for eye examinations.
DESIGN:
Cross-sectional survey and prospective cohort study.
METHODS:
We interviewed OAG patients (probands) at the Wilmer Eye Institute and their biologically related parents, siblings, and children about their knowledge of OAG risk factors. Qualified family members were offered an eye examination through the EyeCare America program. Three months after initial contact, a follow-up telephone questionnaire determined the outcome of the referral.
RESULTS:
Among 102 probands and 100 (of 230 eligible) family members who were interviewed, there was high awareness that OAG is related to older age (85% both groups). More probands knew of the association with higher intraocular pressure (95%) compared with family (78%). Yet, 21% of both groups were not aware that OAG is hereditary, and only 53% of probands and 30% of family members knew that OAG is more common in certain ethnic groups. Only two-thirds of probands had suggested that family members have an eye examination. Eighty percent of family members had had an eye examination within the last year; of 21 with no recent examination, 66% (13/21) accepted referral.
CONCLUSIONS:
The Help the Family Glaucoma project developed a novel approach to identify those at high-risk for OAG. Screening of relatives of OAG patients deserves further study in a more representative selection of the general population.
Resumo:
PURPOSE: To clarify the risk parameters measured by anterior segment optical coherence tomography (AS-OCT) for elevated intraocular pressures (IOP) provoked by the darkroom test and to provide recommendations for its clinical usage. METHODS: Subjects aged >40 years and whose peripheral anterior chambers were ≤1/4 corneal thickness were recruited. The anterior segment of the eye was imaged in sitting position and under both light and dark conditions and biometry was performed using anterior segment optical coherence tomography. The analyzed parameters were: (1) central anterior chamber depth (ACD); (2) anterior chamber width; (3) pupil diameter; (4) iris curvature; (5) lens thickness; and (6) number of meridians with closed angles (NCA). Then the darkroom test was performed and a positive provocative test result was defined as a rise in IOP ≥8 mm Hg after the test. Statistical analyses included: (1) the difference in parameters between positive and negative eyes; (2) the association between posttest IOP and the parameters; and (3) the difference in parameters between the 2 eyes in subjects with the asymmetric results. RESULTS: A total of 70 subjects were recruited. ACD (P=0.022), NCA in light (P<0.001), and NCA in dark (P<0.001) were different significantly between eyes with positive and negative results. There was a strong association between NCA in dark (r=0.755, P<0.001) and the posttest IOP. Among subjects with asymmetric results between the 2 eyes, the ACD was shallower and the lens thickness was larger in the positive eye. CONCLUSIONS: The posttest IOP is determined by the extent of functionally closed angles in the dark. The test may be useful in the early diagnosis of primary angle closure. At the same time, angle configuration should be evaluated to remove false positive result.
Resumo:
Roadside safety barriers designs are tested with passenger cars in Europe using standard EN1317 in which the impact angle for normal, high and very high containment level tests is 20°. In comparison to EN1317, the US standard MASH has higher impact angles for cars and pickups (25°) and different vehicle masses. Studies in Europe (RISER) and the US have shown values for the 90th percentile impact angle of 30°–34°. Thus, the limited evidence available suggests that the 20° angle applied in EN 1317 may be too low.
The first goal of this paper is to use the US NCHRP database (Project NCHRP 17–22) to assess the distribution of impact angle and collision speed in recent ROR accidents. Second, based on the findings of the statistical analysis and on analysis of impact angles and speeds in the literature, an LS-DYNA finite element analysis was carried out to evaluate the normal containment level of concrete barriers in non-standard collisions. The FE model was validated against a crash test of a portable concrete barrier carried out at the UK Transport Research Laboratory (TRL).
The accident data analysis for run-off road accidents indicates that a substantial proportion of accidents have an impact angle in excess of 20°. The baseline LS-DYNA model showed good comparison with experimental acceleration severity index (ASI) data and the parametric analysis indicates a very significant influence of impact angle on ASI. Accordingly, a review of European run-off road accidents and the configuration of EN 1317 should be performed.
Resumo:
PURPOSE: Glaucoma patients are still at risk of becoming blind. It is of clinical significance to determine the risk of blindness and its causes to prevent its occurrence. This systematic review estimates the number of treated glaucoma patients with end-of-life visual impairment (VI) and blindness and the factors that are associated with this.
METHODS: A systematic literature search in relevant databases was conducted in August 2014 on end-of-life VI. A total of 2574 articles were identified, of which 5 on end-of-life VI. Several data items were extracted from the reports and presented in tables.
RESULTS: All studies had a retrospective design. A considerable number of glaucoma patients were found to be blind at the end of their life; with up to 24% unilateral and 10% bilateral blindness. The following factors were associated with blindness: (1) baseline severity of visual field loss: advanced stage of glaucoma or substantial visual field loss at the initial visit; (2) factors influencing progression: fluctuation of intraocular pressure (IOP) during treatment, presence of pseudoexfoliation, poor patient compliance, higher IOP; (3) longer time period: longer duration of disease and older age at death because of a longer life expectancy; and (4) coexistence of other ocular pathology.
CONCLUSIONS: Further prevention of blindness in glaucoma patients is needed. To reach this goal, it is important to address the risk factors for blindness identified in this review, especially those that can be modified, such as advanced disease at diagnosis, high and fluctuating IOP, and poor compliance.
Resumo:
We present a method for recovering facial shape using an image of a face and a reference model. The zenith angle of the surface normal is recovered directly from the intensities of the image. The azimuth angle of the reference model is then combined with the calculated zenith angle in order to get a new field of surface normals. After integration of the needle map, the recovered surface has the effect of mapped facial features over the reference model. Experiments demonstrate that for the lambertian case, surface recovery is achieved with high accuracy. For non-Lambertian cases, experiments suggest potential for face recognition applications.
Resumo:
This article describes a finite element-based formulation for the statistical analysis of the response of stochastic structural composite systems whose material properties are described by random fields. A first-order technique is used to obtain the second-order statistics for the structural response considering means and variances of the displacement and stress fields of plate or shell composite structures. Propagation of uncertainties depends on sensitivities taken as measurement of variation effects. The adjoint variable method is used to obtain the sensitivity matrix. This method is appropriated for composite structures due to the large number of random input parameters. Dominant effects on the stochastic characteristics are studied analyzing the influence of different random parameters. In particular, a study of the anisotropy influence on uncertainties propagation of angle-ply composites is carried out based on the proposed approach.
Resumo:
Variations of manufacturing process parameters and environmental aspects may affect the quality and performance of composite materials, which consequently affects their structural behaviour. Reliability-based design optimisation (RBDO) and robust design optimisation (RDO) searches for safe structural systems with minimal variability of response when subjected to uncertainties in material design parameters. An approach that simultaneously considers reliability and robustness is proposed in this paper. Depending on a given reliability index imposed on composite structures, a trade-off is established between the performance targets and robustness. Robustness is expressed in terms of the coefficient of variation of the constrained structural response weighted by its nominal value. The Pareto normed front is built and the nearest point to the origin is estimated as the best solution of the bi-objective optimisation problem.
Resumo:
Référence bibliographique : Rol, 59109
Resumo:
Référence bibliographique : Rol, 59135
Resumo:
Référence bibliographique : Rol, 59136
Resumo:
Référence bibliographique : Rol, 59137 bis
Resumo:
Référence bibliographique : Rol, 60120