Thermomechanical environment characterisation in injection moulding and its relation to the mechanical properties of talc-filled polypropylene

This study is focused on the establishment of relationships between the injection moulding processing conditions, the applied thermomechanical environment (TME) and the tensile properties of talc-filled polypropylene,adopting a new extended concept of thermomechanical indices (TMI). In this approach, TMI are calculated from computational simulations of the moulding process that characterise the TME during processing, which are then related to the mechanical properties of the mouldings. In this study, this concept is extended to both the filling and the packing phases, with new TMI defined related to the morphology developed during these phases. A design of experiments approach based on Taguchi orthogonal arrays was adopted to vary the injection moulding parameters (injection flow rate, injection temperature, mould wall temperature and holding pressure), and thus, the TME. Results from analysis of variance for injection-moulded tensile specimens have shown that among the considered processing conditions, the flow rate is the most significant parameter for the Young’s modulus; the flow rate and melt temperature are the most significant for the strain at break; and the holding pressure and flow rate are the most significant for the stress at yield. The yield stress and Young’s modulus were found to be governed mostly by the thermostress index (TSI, related to the orientation of the skin layer), whilst the strain at break depends on both the TSI and the cooling index (CI, associated to the crystallinity degree of the core region). The proposed TMI approach provides predictive capabilities of the mechanical response of injection-moulded components, which is a valuable input during their design stage.

REENGINEERING THE CONCEPT OF URBAN CARS: A CASE STUDY

Based on a previously developed mathematical model for fuel consumption of a modular car, here we discuss the cross impacts of engineering scenarios vs. flexibility in use for modular vehicle architectures to achieve the reduction of CO2 emissions targeted by the European Union, in 2009. A systems perspective is adopted in conceptualizing a modular architecture of vehicles. From a theoretical viewpoint, we found modular architecture of vehicles a potential design strategy to minimize fuel inefficiencies and, thus, a strategy for design for environment.

Residents’ perceptions of tourism impacts in Guimarães (Portugal): a cluster analysis

In this investigation, a cluster analysis was used to separate Guimara˜es (Portugal) residents into clusters according to their perceptions of the impacts of tourism development. This approach is uncommonly applied to Portugal data and is even rarer for world heritage sites. The world heritage designation is believed to make an area more attractive to tourists. The clustering procedure analysed 400 data observations from a Guimara˜es resident survey and revealed the existence of three clusters: the Sceptics, the Moderately Optimistic and the Enthusiasts. The results were consistent with the empirical literature’s results, with the emergent nature of the destination found to be relevant. The fact that tourism is relatively recent in this destination has its major reflex in the devaluation by most of the residents of the negative impacts of tourism development.

Guimarães residents’ perceptions towards tourism impacts: a cluster analysis

The present study was designed to assess and segment local residents with respect to their perceived impacts of Guimarães tourism development. The residents of this municipality (located in the northern part of Portugal) are quite strong in their support to tourism. However, they do not keep a homogeneous perception of tourism impacts. A clusters analysis using data from a survey of 400 Guimarães residents’ has revealed the existence of three clusters, according the different degrees of perceived tourism impacts: the Skeptics - moderate in relation to the benefits (averages range from 2.89-3.74) and the ones more concerned with its costs (averages range from 2.86-3.74); the Moderately optimistic - very optimistic about the benefits of tourism (averages range from 3.74-4.51) and conscious of the costs (averages range from 2.71-3.49); the Enthusiasts - very optimistic about tourism benefits (averages range from 2.92-4.52) and little worried about its costs (averages range from 1.78-3.26). Following the data from the survey, the findings are discussed and a few conclusions are extracted.

Certification and integration of environment with quality and safety – a path to sustained success

According to Wright [1] certification of products and processes began during the 1960’s in the manufacturing industry, as a tool to control and assure the quality/conformity of products and services provided by suppliers to customers/consumers. Thus, the series of ISO 9000 was published first time, in 1987 and it was been created with a flexible character, to be reviewed periodically. Later, were published others normative references, which highlight the ISO 14001 in 1996 and OHSAS 18001 in 1999. This was also, the natural sequence of the certification processes in the organizations, i.e., began with the certification of quality management systems (QMS) followed by the environmental management systems (EMS) and after for the Occupational Health and Safety Management System (OHSMS). Hence, a high percentage of organizations with an EMS, in accordance with the ISO 14001, had also implemented, a certified QMS, in accordance with ISO 9001. At first the implementation of a QMS was particularly relevant in high demanding activity sectors, like the automotive and aeronautical industries, but it has rapidly extended to every activity sector, becoming a common requisite of any company worldwide and a factor of competitiveness and survival. Due to the increasingly demanding environmental legislation in developed countries, companies nowadays are required to seriously take into consideration not only environmental aspects associated to the production chain itself, but also to the life cycle of their products.

A generic model for integration of Quality, Environment and Safety Management Systems

Purpose – The purpose of this paper is to propose a generic model of Integrated Management System of Quality, Environment and Safety (IMS-QES) that can be adapted and progressively to assimilate various Management Systems, of which highlights: ISO 9001 for Quality; ISO 14001 for Environment; OHSAS 18001 for Occupational Health and Safety. Design/methodology/approach – The model was designed in the real environment of a Portuguese Organization and 160 employees were surveyed. The rate response was equal to 86 percent. The conceived model was implemented in a first phase for the integration of Quality, Environment and Safety Management Systems. Findings – Among the main findings of the survey the paper highlights: the elimination of conflicts between individual systems with resources optimization; creation of added value to the business by eliminating several types of wastes; the integrated management of sustainability components in a global market; the improvement of partnerships with suppliers of goods and services; reducing the number of internal and external audits. Originality/value – This case study is one of the first Portuguese empirical researches about IMS-QES and the paper believes that it can be useful in the creation of a Portuguese guideline for integration, namely the Quality Management Systems; Environmental Management Systems and Occupational Health and Safety Management Systems among others.

Selection of anthracnose resistant common beans using detached leaves in partially controlled environment

The objectives of this study were to evaluate the possibility of selecting anthracnose resistant common bean plants using detached primary leaves in partially controlled environment of a greenhouse and identify differences in the reaction of genotypes to anthracnose. The common bean cultivars Ouro Negro, OuroVermelho, ManteigãoFosco 11, Rudá, Rudá-R, VP8, BRSMG Madrepérola, Pérola, MeiaNoite and BRSMG Talismãwere characterizedfor resistance to the races 65, 81 and 453 of Colletotrichum lindemuthianum and the method of detached primary leaves was compared to the method with the traditional inoculation of plants at the phenological stage V2. The lines Rudá, Rudá-R and Pérola were inoculated with the races 65 and 453 of C. lindemuthianum, aiming to assess the rate of coincidence of anthracnose severity by both inoculation methods. In general, the two methods presented similar results for the reaction of the cultivars. The use of detached primary leaves of common bean plants in the partially controlled environment was feasible for selection of plants resistant to anthracnose and has the advantages of low-needed infrastructure and reduction of resources, space and time.

Tourism impacts of a portuguese world heritage historic center: residents’ perspectives

The aim of this study is twofold. First, the study analyzes local community perspectives of the importance of the WHS classification of the historic center of Évora. Second, the study analyzes local residents’ perceived tourism impacts on the municipality of Évora. The methodology comprises quantitative research based on a self-administered survey applied to convenience samples of local residents of Évora in the beginning of 2014. The main results reveal that local residents have a strongly positive perception of the WHS designation. With regard to the perceived tourism impacts, a principal component factor analysis delineated three positive and three negative tourism impacts. The comparison of the mean scores of these factors across residents that live near and far from the historic center reveals that the most valued and least valued factors are common to all groups of residents. Nevertheless, in terms of positive impacts, the residents that live near the historic center revealed higher means than the residents that live far from it, whereas in terms of negative impacts, the latter group revealed higher means than former group.

Residents’ perceptions on impacts of hosting the “Guimarães 2012 European Capital of Culture”: comparisons of the pre-and post-2012 ECOC

Residents tend to have high expectations about the benefits of hosting a mega‐event. So, it was not surprising that the nomination of Guimarães, Portugal, as the 2012 European Capital of Culture (2012 ECOC) had raised great expectations in the local community towards its socio‐economic and cultural benefits. The present research was designed to examine the Guimarães residents’ perceptions on the impacts of hosting the 2012 ECOC approached in two different time schedules, the pre‐ and the post‐event, trying to capture the evolution of the residents` evaluation of its impacts. For getting the data, two surveys were applied to Guimarães` residents, one in the pre‐event phase, in 2011, and another in the post‐event phase, in 2013. This approach is uncommonly applied to Portugal data and it is even the first time it was done to a Portuguese European Capital of Culture. After a factor analysis, the results of t‐tests indicate that there were significant differences (p<0.05) between the samples from the pre‐ and post‐2012 ECOC on two positive impact factors (Community’ benefits and Residents’ benefits) and one negative impact factor (Economic, social and environmental costs). Respondents also showed a negative perception of the impacts in all dimensions, except Changes in habits of Guimarães residents.

Residents’ perceptions on impacts of hosting the “Guimarães 2012 European Capital of Culture”: comparisons of the pre-and post-2012 ECOC

The nomination of Guimarães, a small city located in the northwest of Portugal, as European capital of culture (ECOC) in 2012 raised great expectations in the local community towards its socio-economic and cultural benefits. As noted by various authors, namely Kim and Petrick (2005), Kim, Gursoy and Lee (2006) and Gursoy, Chi, Ai and Chen (2011), residents tend to have high expectations about the benefits of hosting a mega-event, although they tend to recognize that some costs will result from it. Therefore, the present research was designed to examine the Guimarães residents’ perceptions on the impacts of the 2012 European capital of culture (2012 ECOC) on the city and the municipality of Guimarães before and after the mega-event and the differences found between the two time periods.

Residents’ perspectives on tourism impacts of portuguese world heritage historic centers: Angra do Heroísmo and Évora

The aim of this study is twofold. First, the study analyzes local community perspectives of the importance of the World Heritage Site (WHS) classification of the historic centers of Angra do Heroísmo and Évora. Second, the study analyzes local residents’ perceived tourism impacts on the municipalities of Angra do Heroísmo and Évora. The methodology comprises quantitative research based on a self-administered survey applied to convenience samples of local residents of the two Portuguese municipalities in 2014. The main results reveal that local residents have a strongly positive perception of the WHS designation in both municipalities. With regard to the perceived tourism impacts, residents from Angra do Heroísmo have a stronger agreement about the impacts of tourism on their city than the residents of Évora, except for the negative social and cultural impacts. The comparison of the mean scores of these impacts across residents that live near and far from the historic centers reveals that the most valued and least valued impacts in the three categories of impacts (economic, social and cultural, and environmental) are common to all groups of residents. Nevertheless, residents living in or near the historic center of Angra do Heroísmo have higher means in the majority of tourism impacts (in all categories), with only one negative impact to concern the majority of respondents. Among the residents from Évora, residents living in or near the historic center have higher means in the majority of economic impacts but lower means in almost social and cultural impacts. With regard to the environmental impacts, residents living in or near the historic center have higher means scores in the positive impacts and lower means scores in the negative environmental impacts.

Developments regarding the integration of the occupational safety and health with quality and environment management systems

Nanotechnology is the manipulation of matter on na almost atomic scale to produce new structures, materials, and devices. As potential occupational exposure to nanomaterials (NMs) becomes more prevalente, it is importante that the principles of medical surveillance and risk management be considered for workers in the nanotechnology industry.However, much information about health risk is beyond our current knowledge. Thus, NMs presente new challenges to understanding, predicting, andmanageing potential health risks. First, we briefly describe some general features of NMs and list the most importante types of NMs. This review discusses the toxicological potential of NMs by comparing possible injury mechanism and know, or potentially adverse, health effects. We review the limited research to date for occupational exposure to these particles and how a worker might be exposed to NMs. The principles of medical surveillance are reviewed to further the discussion of occupational health surveillance are reviewed to further the discussion of occupational health surveillance for workers exposed to NMs. We outlinehow occupational health professionals could contribute to a better knowledge of health effects by the utilization of a health surveillance program and by minimizing exposure. Finally, we discuss the early steps towards regulation and the difficulties facing regulators in controlling potentially harmful exposures in the absence of suficiente scientific evidence.

Impacts of vinasse and methods of sugarcane harvesting on the availability of K and carbon stock of an Argisol

ABSTRACT Soils of tropical regions are more weathered and in need of conservation managements to maintain and improve the quality of its components. The objective of this study was to evaluate the availability of K, the organic matter content and the stock of total carbon of an Argisol after vinasse application and manual and mechanized harvesting of burnt and raw sugarcane, in western São Paulo.The data collection was done in the 2012/2013 harvest, in a bioenergy company in Presidente Prudente/SP. The research was arranged out following a split-plot scheme in a 5x5 factorial design, characterized by four management systems: without vinasse application and harvest without burning; with vinasse application and harvest without burning; with vinasse application and harvest after burning; without vinasse application and harvest after burning; plus native forest, and five soil sampling depths (0-10 10-20, 20-30, 30-40, 40-50 cm), with four replications. In each treatment, the K content in the soil and accumulated in the remaining dry biomass in the area, the levels of organic matter, organic carbon and soil carbon stock were determined. The mean values were compared by Tukey test. The vinasse application associated with the harvest without burning increased the K content in soil layers up to 40 cm deep. The managements without vinasse application and manual harvest after burning, and without vinasse application with mechanical harvesting without burning did not increase the levels of organic matter, organic carbon and stock of total soil organic carbon, while the vinasse application and harvest after burning and without burning increased the levels of these attributes in the depth of 0-10 cm.

Is the International Business Environment the actual context for international business research?

The International Business Environment (IBE) has been argued to be the essential context for international business (IB) studies and the distinguishing factor from other management studies and studies of large enterprises. Two content analysis show that many papers published in top tier IB journals either lack reference to any dimension of the IBE or tend to be uni-or bi-dimensional when addressing the IBE; it is not a surprise that the cultural dimension is the most often used. We suggest that: (a) there is need to developed more uni-and multi-dimensional environmental constructs; (b) a more holistic view of the IBE provides richer insights on the actual complexity underlying IB research. Future studies that provide more comprehensive models of the IBE that overcome the usual broad classifications of the international environment as undefined and uncontrollable factors are warranted to advance conceptual and empirical research.

MICROFINANCE AND CLIMATE CHANGE IMPACTS: THE CASE OF AGROAMIGO IN BRAZIL

ABSTRACTThis paper reports an empirical case study on the interface between microfinance and climate change actions. Climate change, which until recently seemed a luxury for the microfinance sector, now appears to be crucial for its future. For their low adaptive capacity, the millions of microfinance clients worldwide happen to be the most vulnerable to a changing climate. However, such an arena is still blurred from an academic viewpoint, and inexistent among Brazilian academia. Therefore, by investigating Brazil’s largest rural MFI, Agroamigo, we aim at providing an empirical contribution to green microfinance. The main conclusion is that, albeit Agroamigo offers important links to climate change initiatives, it will need to take better account of specific vulnerabilities and risks to protect its portfolio and clients better from climate change impacts.