998 resultados para Elementos finitos : Placas : Estruturas


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Este trabalho trata do emprego do modelo de dano dúctil de Gurson e de alguns aspectos relativos a sua implementação computacional. Emprega-se como ponto de partida o programa Metafor, código de elementos finitos voltado para a simulação de problemas de conformação mecânica, contemplando portanto grandes deformações plásticas. Estudam-se alguns casos simples procurando identificar a influência de cada parâmetro do modelo de Gurson na resposta. É discutida a aplicação dos modelos de nucleação de vazios usualmente empregados em conjunto com a superfície de escoamento de Gurson em situações onde há reversão de solicitação. São propostas alterações nos modelos usuais de nucleação de forma a minorar resultados incoerentes verificados. Apresenta-se um algoritmo alternativo ao método de Newton-Raphson para a solução do sistema de equações associado à forma fraca das equações de equilíbrio, em situações onde a rigidez fica muito pequena. Tal algoritmo é implementado e testado. Um algoritmo de integração de tensões é apresentado e implementado, mostrando-se sua vantagem do ponto de vista de robustez, ou seja, obtenção da resposta correta a despeito do tamanho de incremento empregado. Também é discutido um procedimento para desconsiderar elementos que apresentem ruptura local Estudam-se problemas envolvendo geração de calor por deformação plástica em conjunto com a formulação do modelo de Gurson, mostrando que a consideração de acoplamento termo-mecânico com dano traz vantagens em algumas simulações. É discutida a implementação do modelo de Gurson sobre a versão tridimensional do Metafor, que contempla a formulação lagrangiana-euleriana arbitrária (LEA). Ao final, é feita uma simulação inicial do comportamento de espumas metálicas.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Desde a antigüidade a medição do escoamento dos fluidos tem sido uma marca de nossa civilização, ajudando a predizer a fertilidade das terras e o consumo d’água em fontes e aquedutos. Nos nossos dias, a área de medição de fluxo está bem estabelecida e ainda desperta grande interesse nas linhas de pesquisa da mecânica dos fluidos experimental e computacional. Em particular, o estudo da medição de fluxo com elementos intrusivos, tais como placas de orifício, é de grande interesse dado o preço baixo do medidor, e sua boa precisão quando comparada à sua simplicidade de instalação e manutenção. Esta dissertação tem como objetivo o estudo da aplicação de elementos finitos aos escoamentos de fluidos viscosos - via aproximação clássica de Galerkin e Galerkin/mínimos-quadrados (GLS) – com particular ênfase na aproximação das equações de Navier-Stokes incompressível no escoamento newtoniano através de um canal obstruído por uma placa de orifício. Inicialmente, são apresentadas as dificuldades do método de Galerkin clássico na aproximação de escoamentos incompressíveis; ou seja, através da simulação de escoamentos viscosos bem conhecidos - como o escoamento no interior de uma cavidade e através de uma expansão súbita - fica evidenciada a restrição imposta pela condição de Babuška-Brezzi quando da escolha dos subespaços aproximantes do campo de velocidade e pressão Como alternativa às patologias do método de Galerkin clássico, esta dissertação emprega a metodologia de Galerkin/mínimos-quadrados na simulação acima mencionada da placa de orifício, a qual permite o uso de elementos de igual-ordem para aproximar velocidade e pressão e capturar de maneira estável escoamentos sujeitos a altos números de Reynolds. Os testes computacionais realizados se apresentaram fisicamente realistas quando comparados com a literatura e dados experimentais, sendo todos desenvolvidos no Laboratório de Mecânica dos Fluidos Aplicada e Computacional (LAMAC) do Departamento de Engenharia Mecânica da Universidade Federal do Rio Grande do Sul.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

No presente estudo, são apresentadas soluções numéricas de problemas de Engenharia, na área de Dinâmica dos Fluidos Computacional, envolvendo fluidos viscosos, em escoamentos incompressíveis, isotérmicos e não isotérmicos, em regime laminar e turbulento, podendo envolver transporte de massa. Os principais objetivos deste trabalho são a formulação e a aplicação de uma estratégia de adaptação automática de malhas e a inclusão de modelos de viscosidade turbulenta, integrados com um algoritmo utilizado para simular escoamentos de fluidos viscosos bi e tridimensionais, no contexto de malhas não estruturadas. O estudo é dirigido no sentido de aumentar o conhecimento a respeito das estruturas de escoamentos turbulentos e de estudar os efeitos físicos no transporte de quantidades escalares propiciando, através de técnicas de adaptação automática de malhas, a obtenção de soluções numéricas precisas a um custo computacional otimizado. As equações de conservação de massa, de balanço de quantidade de movimento e de quantidade escalar filtradas são utilizadas para simular as grandes escalas de escoamentos turbulentos e, para representar as escalas submalha, são utilizados dois modelos de viscosidade turbulenta: o modelo de Smagorinsky clássico e o modelo dinâmico. Para obter soluções numéricas com precisão, é desenvolvida e implementada uma estratégia de adaptação automática de malhas, a qual é realizada simultaneamente e interativamente com a obtenção da solução. O estudo do comportamento da solução numérica é fundamentado em indicadores de erro, com o propósito de mapear as regiões onde certos fenômenos físicos do escoamento ocorrem com maior intensidade e de aplicar nestas regiões um esquema de adaptação de malhas. A adaptação é constituída por processos de refinamento/desrefinamento e por um processo de suavização laplaciana. Os procedimentos para a implementação dos modelos de viscosidade turbulenta e a estratégia de adaptação automática de malhas são incorporados ao código computacional de elementos finitos tridimensionais, o qual utiliza elementos tetraédricos lineares. Aplicações de escoamentos de fluidos viscosos, incompressíveis, isotérmicos e não isotérmicos em regime laminar e turbulento são simuladas e os resultados são apresentados e comparados com os obtidos numérica ou experimentalmente por outros autores.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A crescente valorização imobiliária das áreas urbanas, que força acréscimos na altura dos edifícios, associada ao desenvolvimento de materiais mais resistentes e técnicas construtivas modernas, que promovem uma tendência ao projeto de estruturas mais esbeltas e flexíveis, formam um cenário propício à ocorrência de problemas associados à resposta dinâmica frente à ação do vento, principalmente à parte flutuante decorrente da turbulência atmosférica.A experiência tem mostrado que o engenheiro estruturalista comum tem pouco ou nenhum conhecimento sobre os efeitos dinâmicos do vento e as conseqüências da vizinhança sobre este carregamento. Por estas razões justifica-se todo o esforço feito no sentido de se estudar, divulgar e tornar mais acessíveis os métodos disponíveis para análise da resposta estrutura à ação dinâmica do vento e os efeitos de vizinhança. Este é o objetivo central do trabalho de dissertação aqui proposto, consiste no estudo crítico, na aplicação prática e na comparação de métodos disponíveis de análise, quais sejam: a Norma Brasileira NBR – 6123, a sua análise estática e dinâmica (Capítulo 9), a Norma Canadense NBCC (1985). Como parte do trabalho foram realizadas análises estruturais detalhadas com programas de elementos finitos, bem como práticas experimentais sobre modelos rígidos no Túnel de Vento Prof. Joaquim Blessmann (TV-2) da UFRGS. Os resultados obtidos através da instrumentação dos modelos ensaiados em túnel de vento foram aplicados às prescrições das normas aqui estudadas. As respostas assim obtidas comparadas com as oriundas da aplicação das recomendações padrão destas normas foram avaliadas comparativamente. Sendo possível concluir que os resultados determinados através das prescrições da norma brasileira de vento apresentaram-se mais consistentes que os da norma canadense. Mesmo assim, alguns pontos necessitam de um estudo maior e mais aprofundado principalmente as considerações referentes à torção, que se mostraram na maioria das vezes contra a segurança, além do efeito da vizinhança que, muitas vezes, causa efeitos imprevisíveis sobre a edificação.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A introdução de um novo material para a execução de estruturas, implica um amplo estudo sobre o mesmo, para que seja aceite como um material de utilização, ou solução, corrente na engenharia civil. Os varões plásticos reforçados com fibra de vidro, GFRP,apresentam-se com diversas vantagens para uma solução de substituição das tradicionais armaduras de aço no betão armado. Um Estado da Arte foi apurado para determinar o ponto de situação do conhecimento e dos estudos realizados por vários autores, desde o início das pesquisas até aos mais recentes estudos disponíveis. Neste seguimento, o presente estudo incide na análise do comportamento à flexão de vigas contínuas de betão armado com varões de GFRP, submetidas a um carregamento distribuído. O trabalho realiza-se com base em 18 modelos de elementos finitos para uma análise paramétrica, sendo os parâmetros estudados, o vão, a percentagem de armadura de flexão e a esbelteza da secção. Para validação do modelo foram, modeladas 7 vigas reais ensaiadas no âmbito de trabalhos de investigação de dois autores Os resultados das modelações das análises paramétricas foram comparados com uma análise elástica e uma análise plástica, utilizando a metodologia do ACI 440.1R-06, para a carga última de dimensionamento. Outras comparações foram feitas através dos limites de deformação do EN 1992-1-1, 2004. Analisa-se a distribuição de esforços, não elásticos, devido à perda de rigidez da viga. Os modelos das vigas mais esbeltas e com menor percentagem de armadura mostraram maior concordância com a análise realizada. As deformações comparadas com o limite L/250 mostram concordância de resultados.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The main objective of this thesis was the study of bracing panels of structural masonry, by applying the Finite Element Method and Strut and Tie Method. It was analyzed the following aspects: the effect of orthotropy on the behavior of the panels; distribution of horizontal forces between panels for buildings; comparison between Equivalent Frame and Finite Elements models; panels design with the Strut and Tie Method. The results showed that one should not disregard the orthotropy, otherwise this can lead to models stiffer than the real. Regarding the distribution of horizontal forces, showed that the disregard of lintels and shear deformation leads to significant differences in the simplified model. The results showed also that the models in Finite Element and Equivalent Frame exhibit similar behavior in respect to stiffness of panels and stress distribution over the sessions requested. It was discussing criteria for designing Strut and Tie Method models in one floor panels. Then, the theoretical strength these panels was compared with the rupture strength of panels tested in the literature. The theoretical maximum strength were always less than the rupture strength of the panels obtained in tests, due to the fact that the proposed model cannot represent the behavior of the masonry after the start of the panel cracking due to plasticization of the reinforcement

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The frequency selective surfaces, or FSS (Frequency Selective Surfaces), are structures consisting of periodic arrays of conductive elements, called patches, which are usually very thin and they are printed on dielectric layers, or by openings perforated on very thin metallic surfaces, for applications in bands of microwave and millimeter waves. These structures are often used in aircraft, missiles, satellites, radomes, antennae reflector, high gain antennas and microwave ovens, for example. The use of these structures has as main objective filter frequency bands that can be broadcast or rejection, depending on the specificity of the required application. In turn, the modern communication systems such as GSM (Global System for Mobile Communications), RFID (Radio Frequency Identification), Bluetooth, Wi-Fi and WiMAX, whose services are highly demanded by society, have required the development of antennas having, as its main features, and low cost profile, and reduced dimensions and weight. In this context, the microstrip antenna is presented as an excellent choice for communications systems today, because (in addition to meeting the requirements mentioned intrinsically) planar structures are easy to manufacture and integration with other components in microwave circuits. Consequently, the analysis and synthesis of these devices mainly, due to the high possibility of shapes, size and frequency of its elements has been carried out by full-wave models, such as the finite element method, the method of moments and finite difference time domain. However, these methods require an accurate despite great computational effort. In this context, computational intelligence (CI) has been used successfully in the design and optimization of microwave planar structures, as an auxiliary tool and very appropriate, given the complexity of the geometry of the antennas and the FSS considered. The computational intelligence is inspired by natural phenomena such as learning, perception and decision, using techniques such as artificial neural networks, fuzzy logic, fractal geometry and evolutionary computation. This work makes a study of application of computational intelligence using meta-heuristics such as genetic algorithms and swarm intelligence optimization of antennas and frequency selective surfaces. Genetic algorithms are computational search methods based on the theory of natural selection proposed by Darwin and genetics used to solve complex problems, eg, problems where the search space grows with the size of the problem. The particle swarm optimization characteristics including the use of intelligence collectively being applied to optimization problems in many areas of research. The main objective of this work is the use of computational intelligence, the analysis and synthesis of antennas and FSS. We considered the structures of a microstrip planar monopole, ring type, and a cross-dipole FSS. We developed algorithms and optimization results obtained for optimized geometries of antennas and FSS considered. To validate results were designed, constructed and measured several prototypes. The measured results showed excellent agreement with the simulated. Moreover, the results obtained in this study were compared to those simulated using a commercial software has been also observed an excellent agreement. Specifically, the efficiency of techniques used were CI evidenced by simulated and measured, aiming at optimizing the bandwidth of an antenna for wideband operation or UWB (Ultra Wideband), using a genetic algorithm and optimizing the bandwidth, by specifying the length of the air gap between two frequency selective surfaces, using an optimization algorithm particle swarm

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In the globalized world modern telecommunications have assumed key role within the company, causing a large increase in demand for the wireless technology of communication, which has been happening in recent years have greatly increased the number of applications using this technology. Due to this demand, new materials are developed to enable new control mechanisms and propagation of electromagnetic waves. The research to develop new technologies for wireless communication presents a multidisciplinary study that covers from the new geometries for passive antennas, active up to the development of materials for devices that improve the performance at the frequency range of operation. Recently, planar antennas have attracted interest due to their characteristics and advantages when compared with other types of antennas. In the area of mobile communications the need for antennas of this type has become increasingly used, due to intensive development, which needs to operate in multifrequency antennas and broadband. The microstrip antennas have narrow bandwidth due to the dielectric losses generated by irradiation. Another limitation is the degradation of the radiation pattern due to the generation of surface waves in the substrate. Some techniques have been developed to minimize this limitation of bandwidth, such as the study of type materials PBG - Photonic Band Gap, to form the dielectric material. This work has as main objective the development project of a slot resonator with multiple layers and use the type PBG substrate, which carried out the optimization from the numerical analysis and then designed the device initially proposed for the band electromagnetic spectrum between 3-9 GHz, which basically includes the band S to X. Was used as the dielectric material RT/Duroid 5870 and RT/Duroid 6010.LM where both are laminated ceramic-filled PTFE dielectric constants 2.33 and 10.2, respectively. Through an experimental investigation was conducted an analysis of the simulated versus measured by observing the behavior of the radiation characteristics from the height variation of the dielectric multilayer substrates. We also used the LTT method resonators structures rectangular slot with multiple layers of material photonic PBG in order to obtain the resonance frequency and the entire theory involving the electromagnetic parameters of the structure under consideration. xviii The analysis developed in this work was performed using the method LTT - Transverse Transmission Line, in the field of Fourier transform that uses a component propagating in the y direction (transverse to the real direction of propagation z), thus treating the general equations of the fields electric and magnetic and function. The PBG theory is applied to obtain the relative permittivity of the polarizations for the sep photonic composite substrates material. The results are obtained with the commercial software Ansoft HFSS, used for accurate analysis of the electromagnetic behavior of the planar device under study through the Finite Element Method (FEM). Numerical computational results are presented in graphical form in two and three dimensions, playing in the parameters of return loss, frequency of radiation and radiation diagram, radiation efficiency and surface current for the device under study, and have as substrates, photonic materials and had been simulated in an appropriate computational tool. With respect to the planar device design study are presented in the simulated and measured results that show good agreement with measurements made. These results are mainly in the identification of resonance modes and determining the characteristics of the designed device, such as resonant frequency, return loss and radiation pattern

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Ceramic substrates have been investigated by researchers around the world and has achieved a high interest in the scientific community, because they had high dielectric constants and excellent performance in the structures employed. Such ceramics result in miniaturized structures with dimensions well reduced and high radiation efficiency. In this work, we have used a new ceramic material called lead zinc titanate in the form of Zn0,8Pb0,2TiO3, capable of being used as a dielectric substrate in the construction of various structures of antennas. The method used in constructing the ceramic combustion synthesis was Self- Sustained High Temperature (SHS - "Self-Propagating High-Temperature Synthesis") which is defined as a process that uses highly exothermic reactions to produce various materials. Once initiated the reaction area in the reaction mixture, the heat generated is sufficient to become self-sustaining combustion in the form of a wave that propagates converting the reaction mixture into the product of interest. Were analyzed aspects of the formation of the composite Zn0,8Pb0,2TiO3 by SHS powders and characterized. The analysis consisted of determining the parameters of the reaction for the formation of the composite, as the ignition temperature and reaction mechanisms. The production of composite Zn0,8Pb0,2TiO3 by SHS performed in the laboratory, was the result of a total control of combustion temperature and after obtaining the powder began the development of ceramics. The product was obtained in the form of regular, alternating layers of porous ceramics and was obtained by uniaxial pressing. 10 The product was characterized by analysis of dilatometry, X-ray diffraction analysis and scanning electron microscopy. One of the contributions typically defined in this work is the development of a new dielectric material, nevertheless presented previously in the literature. Therefore, the structures of the antennas presented in this work consisted of new dielectric ceramics based Zn0,8Pb0,2TiO3 usually used as dielectric substrate. The materials produced were characterized in the microwave range. These are dielectrics with high relative permittivity and low loss tangent. The Ansoft HFSS, commercial program employee, using the finite element method, and was used for analysis of antennas studied in this work

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Microstrip antennas are subject matter in several research fields due to its numerous advantages. The discovery, at 1999, of a new class of materials called metamaterials - usually composed of metallic elements immersed in a dielectric medium, have attracted the attention of the scientific community, due to its electromagnetic properties, especially the ability to use in planar structures, such as microstrip, without interfering with their traditional geometry. The aim of this paper is to analyze the effects of one and bidimensional metamaterial substrates in microstrip antennas, with different configurations of resonance rings, SRR, in the dielectric layer. Fractal geometry is applied to these rings, in seeking to verify a multiband behavior and to reduce the resonance frequency of the antennas. The results are then given by commercial software Ansoft HFSS, used for precise analysis of the electromagnetic behavior of antennas by Finite Element Method (FEM). To reach it, this essay will first perform a literature study on fractal geometry and its generative process. This paper also presents an analysis of microstrip antennas, with emphasis on addressing different types of substrates as part of its electric and magnetic anisotropic behavior. It s performed too an approach on metamaterials and their unique properties

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Electrical Motors transform electrical energy into mechanic energy in a relatively easy way. In some specific applications, there is a need for electrical motors to function with noncontaminated fluids, in high speed systems, under inhospitable conditions, or yet, in local of difficult access and considerable depth. In these cases, the motors with mechanical bearings are not adequate as their wear give rise to maintenance. A possible solution for these problems stems from two different alternatives: motors with magnetic bearings, that increase the length of the machine (not convenient), and the bearingless motors that aggregate compactness. Induction motors have been used more and more in research, as they confer more robustness to bearingless motors compared to other types of machines building with others motors. The research that has already been carried out with bearingless induction motors utilized prototypes that had their structures of stator/rotor modified, that differ most of the times from the conventional induction motors. The goal of this work is to study the viability of the use of conventional induction Motors for the beringless motors applications, pointing out the types of Motors of this category that can be more useful. The study uses the Finite Elements Method (FEM). As a means of validation, a conventional induction motor with squirrel-cage rotor was successfully used for the beringless motor application of the divided winding type, confirming the proposed thesis. The controlling system was implemented in a Digital Signal Processor (DSP)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Os modelos de bielas e tirantes são procedimentos de análise apropriados para projetar elementos de concreto armado em casos de regiões onde há alterações geométricas ou concentrações de tensões, denominadas regiões D. Trata-se de bons modelos de representação da estrutura para avaliar melhor o seu comportamento estrutural e seu mecanismo resistente. O presente artigo aplica a técnica da otimização topológica para identificar o fluxo de tensões nas estruturas, definindo a configuração dos membros de bielas e tirantes, e quantifica seus valores para dimensionamento. Utilizam-se o método ESO, e uma variante desse, o SESO (Smoothing ESO) com o método dos elementos finitos em elasticidade plana. A filosofia do SESO baseia-se na observação de que se o elemento não for necessário à estrutura, sua contribuição de rigidez vai diminuindo progressivamente. Isto é, sua remoção é atenuada nos valores da matriz constitutiva, como se este estivesse em processo de danificação. Para validar a presente formulação, apresentam-se alguns exemplos numéricos onde se comparam suas respostas com as advindas de trabalhos científicos pioneiros sobre o assunto.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)