Staphylococcus spp., Enterobacteriaceae and Pseudomonadaceae oral isolates from Brazilian HIV-positive patients. Correlation with CD4 cell counts and viral load

The aim was to evaluate the presence of Staphylococcus spp., Enterobacteriaceae and Pseudomonadaceae in the oral cavities of HIV-positive patients. Forty-five individuals diagnosed as HIV-positive by ELISA and Western-blot, and under anti-retroviral therapy for at least 1 year, were included in the study. The control group constituted 45 systemically healthy individuals matched to the HIV patients to gender, age and oral conditions. Oral rinses were collected and isolates were identified by API system. Counts of microorganisms from HIV and control groups were compared statistically by a Mann-Whitney test (alpha = 5%). The percentages of individuals positive for staphylococci were similar between the groups (p = 0.764), whereas for Gram-negative rods, a higher percentage was observed amongst HIV-positive (p = 0.001).There was no difference in Staphylococcus counts between HIV and control groups (p = 0.1008). Counts were lower in the oral cavities of patients with low viral load (p = 0.021), and no difference was observed in relation to CD4 counts (p = 0.929). Staphylococcus aureus was the most frequently isolated species in HIV group, and Staphylococcus epidermidis was the prevalent species in the control group. Significantly higher numbers of enteric bacteria and pseudomonas were detected in the oral cavities of the HIV group than in the control (p = 0.0001). Enterobacter cloacae was the most frequently isolated species in both groups. Counts of enteric bacteria and pseudomonas were significantly lower in patients with low CD4 counts (p = 0.011); however, there was no difference relating to viral load. It may be concluded that HIV group showed greater species diversity and a higher prevalence of Enterobacteriaceae/Pseudomonadaceae. (C) 2011 Elsevier Ltd. All rights reserved.

Estudo da degradação da força gerada por elásticos ortodônticos sintéticos

OBJETIVO: analisar separada e comparativamente cinco marcas comerciais de elásticos sintéticos (Morelli, Ormco, GAC, TP e Unitek) quanto à degradação da força gerada por estes em função do tempo, quando mantidos continuamente estirados em uma distância de 20mm. METODOLOGIA: as leituras das quantidades de força gerada pelos elásticos foram feitas nos intervalos 1/2, 1, 6, 12, 24, 48 horas; 7, 14, 21 e 28 dias. Construiu-se um gráfico de força versus tempo, onde se pôde observar significativa redução na quantidade de força liberada pelos elásticos na primeira hora de ativação. RESULTADOS: verificou-se uma redução na quantidade de força gerada pelos elásticos de 20,31 a 38,47% na primeira hora de testes e de 47,7 a 75,95% em 28 dias de estiramento constante. CONCLUSÕES: concluiu-se que todas as amostras das marcas comerciais estudadas sofreram significativa redução na quantidade de força liberada na primeira hora de ativação e que a média de força gerada em 21 e 28 dias de testes foi semelhante para todas as amostras pesquisadas.

Isolation of Rhodocyclus gelatinosus from poultry slaughterhouse wastewater

Quatro culturas de bactérias fotossintetizantes isoladas de águas residuárias de abatedouro de aves foram identificadas como Rhodocyclus gelatinosus com base nas seguintes propriedades: desenvolvimento de cor avermelhada nos cultivos em meio sintético, motilidade positiva, morfologia de bastonetes gram-negativos ligeiramente curvos, atividade de liquefação da gelatina, utilização de citrato como fonte de carbono e produção de bacterioclorofila a e carotenóides da série espiriloxantina alternativa. Esses testes foram também aplicados para uma linhagem de Rhodocyclus gelatinosus de referência para efeito de comparação. A biomassa de R. gelatinosus pode representar uma fonte de nutrientes e de pigmentos na alimentação de aves.

Angling sport fishing in Lobo-Broa reservoir (Itirapina, SP, Brazil)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo de bactérias do gênero Gluconobacter: isolamento, purificação, identificação fenotípica e molecular

A importância do estudo de bactérias acéticas, em especial as do gênero Gluconobacter, está baseada em suas aplicações industriais, pois estas possuem a capacidade de bioconversão de sorbitol a sorbose, viabilizando o processo de produção de vitamina C. O estudo envolveu coletas de amostras em indústrias de refrigerante, flores, frutos e mel, seguidas de purificação, identificação fenotípica e identificação molecular, com a utilização de iniciador definido a partir de consulta ao Nucleotide Sequence Database. Preservaram-se as linhagens identificadas como membros da família Acetobacteriaceae, gênero Gluconobacter. Foi isolado um total de 110 linhagens dos substratos: Pyrostegia venusta (Cipó de São João), mel, Vitis vinifera (uva), Pyrus communis (pêra), Malus sp. (maçã) e de duas amostras de refrigerantes envasados em embalagens de PET de 2 L. Deste total, 57 linhagens foram recuperadas em meio MYP (manitol, extrato de levedura, peptona), 12 em meio YGM (glicose, manitol, extrato de levedura, etanol, ácido acético), 41 em meio de enriquecimento e, posteriormente, em meio GYC (glicose, extrato de levedura e carbonato de cálcio). Obtiveram-se 68 linhagens identificadas como bastonetes Gram negativos. Destas, 31 foram caracterizadas bioquimicamente como pertencentes à família Acetobacteriaceae por serem catalase positivas, oxidase negativas e produtoras de ácido a partir de glicose. A caracterização dessas linhagens foi complementada com os testes bioquímicos: liquefação da gelatina, redução de nitrato, formação de indol e H2S e oxidação de etanol a ácido acético. Métodos moleculares foram aplicados para identificação do gênero Gluconobacter. Finalmente, oito linhagens foram caracterizadas como pertencentes ao gênero Gluconobacter. As linhagens encontram-se depositadas em coleção de cultura do laboratório de Microbiologia do Departamento de Biologia da UNESP, campus de Assis, estocadas em extrato de malte 20 a -196 ºC.

Evaluation of the in vitro activity of cefepime compared to other broad-spectrum cephalosporins against clinical isolates from eighteen Brazilian hospitals by using the Etest

The in vitro activity of cefepime was compared to that of ceftazidime, ceftriaxone, and cefotaxime in a multicenter study involving 10 clinical microbiology laboratories and clinical isolates from 18 Brazilian hospitals from 7 cities (4 states). A total of 982 isolates consecutively collected between December 1995 and March 1996 were susceptibility tested by using Etest and following the NCCLS procedures for agar diffusion tests. The cefepime spectrum was broader than that of the other broad-spectrum cephalosporins against both Gram-negative rods and Gram-positive cocci. Cefepime tons particularly move active against Enterobacter sp. (MIC90, 2 mu g/ml), Serratia sp. (MIC90, 2 mu g/ml) and oxacillin-susceptible Staphylococcus aureus (MIC90, 3 mu g/ml). Against Pseudomonas aeruginosa, cefepime (MIC90 16 mu g/ml) was slightly more active than ceftazidime (MIC90 32 mu g/ml) and 8- to 16-fold more active than ceftriaxone or cefotaxime (MIC90 >256 mu g/ml). Our results show that nosocomial bacteria, especially Gram-negative rods, have a high rate of cephalosporin resistance in Brazil. However, part of these resistant bacteria remains susceptible to cefepime. The Etest was shown to be an excellent method for multicenter studies of the in vitro evaluation of new antimicrobial agents. (C) 1997 Elsevier B.V.

Energy efficiency for standard penetration tests

The need for standardization of the measured blow count number N-spt into a normalized reference energy value is now fully recognized. The present paper extends the existing theoretical approach using the wave propagation theory as framework and introduces an analysis for large displacements enabling the influence of rod length in the measured N-spt values to be quantified. The study is based on both calibration chamber and field tests. Energy measurements are monitored in two different positions: below the anvil and above the sampler. Both experimental and numerical results demonstrate that whereas the energy delivered into the rod stem is expressed as a ratio of the theoretical free-fall energy of the hammer, the effective sampler energy is a function of the hammer height of fall, sampler permanent penetration, and weight of both hammer and rods. Influence of rod length is twofold and produces opposite effects: wave energy losses increase with increasing rod length and in a long rod composition the gain in potential energy from rod weight is significant and may partially compensate measured energy losses. Based on this revised approach, an analytical solution is proposed to calculate the energy delivered to the sampler and efficiency coefficients are suggested to account for energy losses during the energy transference process.

Flammability limits: A review with emphasis on ethanol for aeronautical applications and description of the experimental procedure

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Longer wavelengths of light improve the growth, intake and feed efficiency of individually reared juvenile pikeperch Sander lucioperca (L.)

We tested the effects of monochromatic light on the specific growth rate (SGR), feed intake and feed efficiency (FE) of juvenile pikeperch, Sander lucioperca (L.). Pikeperch were reared individually for 42 days in aquaria covered with blue, green, yellow or red gelatin filters or white paper (control; n=5). Linear regression analysis indicated a significant positive effect of longer wavelengths of light on the condition factor (CF), FE and SGR. The final weight, SGR and CF were significantly higher in fish reared under red than under white light, and FE was better under green, yellow and red light than under white light (Dunnett's post hoc test, P < 0.05) while blue was comparable to white light in terms of the measured parameters. After the growth trial, the spectral sensitivity of photoreceptor cells in the retina was tested using microspectrophotometry, which revealed the presence of rods with lambda(max) at ca. 530 nm and two cone classes, absorbing maximally at ca. 535 and 603 nm, all containing a porphyropsin-based pigment. These results suggest that the presence of mid and long wavelength-sensitive cones enhances visual sensitivity under mid-wavelength and long-wavelength environments, and thus supports the finding that longer wavelengths of incoming light can improve FE and SGR of the cultivated pikeperch.

Low-Temperature Sputtering Deposition of Aligned Polycrystalline CaCu3Ti4O12 Nanorods

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Numeric evaluation of the stiffness of log-concrete composite beams submitted the cyclical load

In this paper was evaluated, using the software ANSYS, the stiffness (El) of the log-concrete composite beams, of section T, with connectors formed by bonded-in steel rods, type CA-50, disposed in X, with application of cyclical load. The stiffness of the system was evaluated through the simulation of bending tests, considered 1/2 beam, with cyclical shipment varying among 40 % and 5 % of the strength of the connection with the load relationship R=0,125, for a total of 10 load cycles applied. The numeric results show a good agreement with experimental tests.

Effects of ethanol on human visual evoked potentials

Studies of the effect of ethanol on human visual evoked potentials are rare and usually involve chronic alcoholic patients. The effect of acute ethanol ingestion has seldom been investigated. We have studied the effect of acute alcoholic poisoning on pattern-reversal visual evoked potentials (PR-VEP) and flash light visual evoked potentials (F-VEP) in 20 normal volunteers. We observed different effects with ethanol: statistically significant prolonged latencies of F-VEP after ingestion, and no significant differences in the latencies of the PR-VEP components. We hypothesize a selective ethanol effect on the afferent transmission of rods, mainly dependent on GABA and glutamatergic neurotransmission, influencing F-VEP latencies, and no effect on cone afferent transmission, as alcohol doesn't influence PR-VEP latencies.

In vitro evaluation of the antimicrobial activity of a castor oil-based irrigant

The antimicrobial activity of irrigating solutions - Endoquil (castor oil detergent), 2% chlorhexidine gluconate solution, and 0.5% NaOCI solution - was evaluated against Gram-positive cocci (Micrococcus luteus, Staphylococcus aureus, Enterococcus faecalis, Staphylococcus epidermidis, Streptococcus mutans, and Streptococcus sobrinus), Gramnegative rods (Escherichia coli and Pseudomonas aeruginosa), and the yeast Candida albicans. Activity was evaluated using the two-layer agar diffusion technique. The base layer was obtained by pouring 10.0 ml of Muller Hinton Medium or 10.0 ml of Brain Heart Infusion agar in a Petri dish. After solidification a 5.0 ml seed layer of Muller Hinton Medium or Brain Heart Infusion agar with inoculum (106/ml) was added. Absorbent paper disks (6.0 mm in diameter) immersed in the solutions were placed at equidistant points. Plates were maintained at room temperature for 2 h for prediffusion of the solutions and incubated at 37°C for 24 h. The candle jar system was used for the Brain Heart Infusion agar plates. All tests were performed in duplicate. After incubation the medium was optimized with 0.05 g% triphenyltetrazolium chlorate gel and inhibition halos were measured. All bacterial strains were inhibited by 2.0% chlorhexidine gluconate. Endoquil was effective against Grampositive microorganisms, and 0.5% NaOCI was effective only against S. aureus. Copyright © 2001 by The American Association of Endodontists.

Evaluation of transfer impressions for osseointegrated implants at various angulations

The accuracy of impressions that transfer the relationship of the implant to the metal framework of the prosthesis continues to be a problem. This study was designed to evaluate the accuracy of the transfer process under variable conditions with regard to implant analog angulations, impression materials, and techniques. Replicas (n = 60) of a metal matrix (control) containing four implants at 90°, 80°, 75°, and 65° in relation to the horizontal surface were obtained by using three impression techniques: T1 - indirect technique with conical copings in closed trays; T2 - direct technique with square copings in open trays; and T3 - square copings splinted with autopolymerizing acrylic resin; and four elastomers: P-polysulfide; I-polyether; A-addition silicone; and Z-condensation silicone. The values of the implant analog annulations were assessed by a profilometer to the nearest 0.017°, then submitted to analysis of variance for comparisons at significance of 5% (P < .05). For implant analog at 90°, the material A associated with T2 and material Z with T3 behaved differently (P < .05) from all groups. At 80°, all materials behaved differently (P < .01) with T1. At 75°, when T1 was associated, materials P and A showed similar behavior, as well as materials I and Z; however, P and A were different from I and Z (P < .01). When T3 was associated, all experimental groups behaved differently among them (P < .01). At 65°, the materials P and Z behaved differently (P < .01) from the control group with T1, T2, and T3; the materials I and A behaved differently from the control group (P < .01) when T1 and T2, respectively, were associated. The more perpendicular the implant analog annulation is in relation to the horizontal surface, the more accurate the impression. The best materials were material I and A and the most satisfactory technique was technique 3.

Effect of 0.4% stannous fluoride gel on Streptococci mutans in relation to elastomeric rings and steel ligatures in orthodontic patients

Background: Patients with fixed orthodontic appliances often experience an absolute increase in the number of Streptococci mutans colony-forming units (cfu). The aim of this investigation was to study the development of biofilm and S. mutans cfu in connection with stainless steel ligatures and elastomeric rings in orthodontic patients treated with and without 0.4% stannous fluoride gel (SFG). Material: Forty-seven patients were divided into 2 groups: those treated with 0.4% SFG for 4 minutes (experimental) and those without 0.4% SFG (control). In each patient, elastomeric rings were used for ligation on 1 side of the dental arch midline, and stainless steel ligatures were used on the opposite side. Saliva samples were collected before and after appliance placement. At 15 and 30 days after appliance placement, biofilm samples from the stainless steel ligatures and the elastomeric rings were collected and subjected to microbiologic procedures and scanning electron microscopy (SEM) analysis. Results: The numbers of S. mutans cfu in the saliva and biofilm were not statistically different between the teeth fitted with elastomeric rings and stainless steel ligatures, or between the experimental and control groups. SEM analysis showed biofilm formation on both ligature ties. Conclusions: Topical application of 0.4% SFG in orthodontic patients with elastomeric rings or stainless steel ligatures does not cause a significant decrease in S. mutans cfu in the saliva and biofilm. Copyright © 2005 by the American Association of Orthodontists.