A rapid procedure for the approximation of bacterial load in fishery products

The production of colour by homogenised fish material in a simplified sugar medium containing and acid indicator has been made use of for the rapid approximation of bacterial load in such products. The medium thus developed contains poptone, tryptone, yeast extract, sodium chloride and beef extract besides dextrose. The time of colour production is influenced to some extent by the level of sodium chloride in the medium and is almost always inversely proportional to the bacterial load in the homogenate.

The influence of peel angle on the mechanics of peeling flexible adherends with arbitrary load-extension characteristics

The peel test is commonly used to determine the strength of adhesive joints. In its simplest form, a thin flexible strip which has been bonded to a rigid surface is peeled from the substrate at a constant rate and the peeling force which is applied to the debonding surfaces by the tension in the tape is measured. Peeling can be carried out with the peel angle, i.e. the angle made by the peel force with the substrate surface, from any value above about 10° although peeling tests at 90 and 180° are most common. If the tape is sufficiently thin for its bending resistance to be negligibly small then as well as the debonding or decohesion energy associated with the adhesive in and around the point of separation, the relation between the peeling force and the peeling angle is influenced both by the mechanical properties of the tape and any pre-strain locked into the tape during its application to the substrate. The analytic solution for a tape material which can be idealised as elastic perfectly-plastic is well established. Here, we present a more general form of analysis, applicable in principle to any constitutive relation between tape load and tape extension. Non-linearity between load and extension is of increasing significance as the peel angle is decreased: the model presented is consistent with existing equations describing the failure of a lap joint between non-linear materials. The analysis also allows for energy losses within the adhesive layer which themselves may be influenced by both peel rate and peel angle. We have experimentally examined the application of this new analysis to several specific peeling cases including tapes of cellophane, poly-vinyl chloride and PTFE. © 2005 Elsevier Ltd. All rights reserved.

Modelling effects of axial load on behaviour of pile groups in laterally-spreading soil

Previous research into the behaviour of piled foundations in laterally-spreading soil deposits has concentrated on pile groups that carry small or negligible axial loads. This paper presents dynamic centrifuge test results for 2 x 2 pile groups with bending and geometric properties similar to real 0.5 m diameter tubular steel and solid circular reinforced-concrete field piles. Axial loads applied represented upper-bounds on typical working loads. The simultaneous scaling of the relevant properties controlling both lateral and axial behaviour allows comparisons to be drawn regarding the particular mechanisms of failure that would dominate for each type of pile. Flexible reinforced-concrete piles which tend to carry lower loads were found to be dominated by lateral effects, while steel piles, which are much stiffer and usually carry greater loads are dominated by settlement considerations. © 2006 Taylor & Francis Group.

Bacterial load in pond water and different organs of a Indian major carp Cirrhinus mrigala Ham.

During the study period (August, 1993 to July,l994) the mean bacterial load in surface water was found to vary from 1.39 xl05 (July'94) to 3.llxl07CFU/ml (September'93), while that of botrom water ranged from l.Olxl06 (May'94) to 5.90xl07CFU/ml (October '93). The mean total number of bacterial load in body slime, liver and kidney was found to vary from 0.58xl03 (July'94) to 2.37xl07CFU/g (March'94),from 0.22xl03(July'94)to 9.64xl06 CFU/g (March'94) from O.l5xl03 (July'94) to 9.36xl06 CFU/g (March'94), respectively. Bacterial load in slime was significantly correlated with bacterial load in liver, bacterial load in slime was significantly correlated with bacterial load in kidney and bacterial load in liver was significantly correlated with bacterial load in kidney.

Characterisation of neurons in the pedal ganglia of the green-lipped mussel, Perna canaliculus, using antibodies raised against neuropeptides and neurotransmitters involved in gastropod egg-laying behaviour and bivalve reproduction and spawning

To characterise central neurons in the pedal ganglia of both male and female green lipped mussel, Perna canaliculus immunohistochemical techniques were used. Mollusc antibodies were used against neuropeptides and neurotansmitters known to control reproduction and spawning. Anti-ELH and anti-APGWamide showed very strong immunoreactivity in small type of neurons. Anti-5-HT and anti-DA immunoreactivity was mostly in large type of neurons. The labelled neurons are consistent with descriptions of neurosecretory cells implicated in the control of reproduction and spawning on the basis of earlier histological staining techniques used in this species. The use of selective immunological markers for peptides and amines appears to be a, promising tool for further characterisation of neurosecretory cells, and to isolate an'tl characterise neuropeptides and other biologically active materials involved in the control of reproduction in Perna canaliculus.

Portable electronic warp load meter

A portable type warp load meter has been developed for the use in fishing trawlers. The instrument enables to monitor the warp load in fishing trawlers accurately and easily without disturbing the routine fishing operations. The instrument can be used in several other places like cranes, bollard tests for marine engines, dry docks etc. especially when the operation has to be conducted easily without disturbing the load system. The information displayed in micro ammeter in the range 0 to 1000 kg can be fed to continuous recorders for detailed analysis and permanent records.

A novel disintegrin, jerdonatin, inhibits platelet aggregation and sperm-egg binding

A novel disintegrin, jerdonatin, was purified to homogeneity from Trimeresurus jerdonii venom by gel filtration and reversed-phase high-pressure liquid chromatography. We isolated the cDNA encoding jerdonatin from the snake venom gland. Jerdonatin cDNA precursor,;encoded pre-peptide, metalloprotease and disintegrin domain. Jerdonatin is composed of 72 amino acid residues including 12 cysteines and the tripeptide sequence Arg-Gly-Asp (RGD), a well-known characteristic of the disintegrin family. Molecular mass of jerdonatin was determined to be 8011 Da by matrix-assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF-MS). Jerdonatin inhibited ADP- and collagen-induced human platelet aggregation with IC50 of 123 and 135 nM, respectively. We also investigated the effect of jerdonatin on the binding of B6D2F1 hybrid mice spermatozoa to mice zona-free eggs and their subsequent fusion. Jerdonatin significantly inhibited sperm-egg binding in a concentration-dependent manner, but had no effect on the fusion of sperm-egg. These results indicate that integrins on the egg play a role in mammalian fertilization. (C) 2004 Elsevier Inc. All rights reserved.

The giant panda (Ailurapoda melanoleuca) somatic nucleus can dedifferentiate in rabbit ooplasm and support early development of the reconstructed egg

The giant panda skeletal muscle cells, uterus epithelial cells and mammary gland cells from an adult individual were cultured and used as nucleus donor for the construction of interspecies embryos by transferring them into enucleated rabbit eggs. All the three kinds of somatic cells were able to reprogram in rabbit ooplasm and support early embryo development, of which mammary gland cells were proven to be the Lest, followed by uterus epithelial cells and skeletal muscle cells. The experiments showed that direct injection of mammary gland cell into enucleated rabbit ooplasm, combined with in vivo development in ligated rabbit oviduct, achieved higher blastocyst development than in vitro culture after the somatic cell was injected into the perivitelline space and fused with the enucleated egg by electrical stimulation. The chromosome analysis demonstrated that the genetic materials in reconstructed blastocyst cells were the same as that in panda somatic cells. In addition, giant panda mitochondrial DNA (mtDNA) was shown to exist in the interspecies reconstructed blastocyst. The data suggest that (i) the ability of ooplasm to dedifferentiate somatic cells is not species-specific; (ii) there is compatibility between interspecies somatic nucleus and ooplasm during early development of the reconstructed egg.

Response of extract release volume to the variations in pH and microbial load during spoilage of fish at refrigeration temperature

This report briefly describes the microbial status and storage properties of fish raised under composite fish culture in sewage fed ponds.

Preservation of Sardinella longiceps in iced and chilled seawater. Part 1 - Changes during storage with particular reference to bacterial load and nitrogenous compounds

Oil sardines in prime condition were subjected to onboard chilling. Two lots were chilled in CSW (samples C and CI), a third lot was chilled in crushed ice (sample I) and a fourth lot left not iced on deck (Sample AI). Upon landing sample AI was iced and sample CI was removed from the CSW and iced. All the four samples were kept in a chilled room for storage studies. The fish chilled and stored in CSW recorded the least, and the fish subjected to delayed icing, the highest values for all the indices of spoilage namely, free amino nitrogen, trimethylamine (TMA) and total volatile base nitrogen (TVBN). The total psychrophilic bacterial number also showed a similar trend. The organoleptic assessment of the cooked samples revealed C I, CI, AI to be the order of preference throughout the storage. This assessment was found to hold good for the rest of the parameters as well. The CSW held fishes were found to be distinctly superior to the iced ones for the first five days of storage. Such a marked prevalence in quality for five days would suffice for the fish to fetch a premium in the market over other landings of the same fish whether chilled or not chilled. Chilling on board in CSW and icing the same after landings, did not show encouraging results.

Cat fish egg pickle

Cat fish constitutes one of the important fisheries in India. Attempts were made for the better utilization of eggs. This paper describes trials made a favourable product such as pickle.

Load-displacement behavior during sharp indentation of viscous-elastic-plastic materials

A constitutive equation is developed for geometrically-similar sharp indentation of a material capable of elastic, viscous, and plastic deformation. The equation is based on a series of elements consisting of a quadratic (reversible) spring, a quadratic (time-dependent, reversible) dashpot, and a quadratic (time-independent, irreversible) slider-essentially modifying a model for an elastic-perfectly plastic material by incorporating a creeping component. Load-displacement solutions to the constitutive equation are obtained for load-controlled indentation during constant loading-rate testing. A characteristic of the responses is the appearance of a forward-displacing "nose" during unloading of load-controlled systems (e.g., magnetic-coil-driven "nanoindentation" systems). Even in the absence of this nose, and the associated initial negative unloading tangent, load-displacement traces (and hence inferred modulus and hardness values) are significantly perturbed on the addition of the viscous component. The viscous-elastic-plastic (VEP) model shows promise for obtaining material properties (elastic modulus, hardness, time-dependence) of time-dependent materials during indentation experiments.

Estimating material elasticity by spherical indentation load-relaxation tests on viscoelastic samples of finite thickness

A two-step viscoelastic spherical indentation method is proposed to compensate for 1) material relaxation and 2) sample thickness. In the first step, the indenter is moved at a constant speed and the reaction force is measured. In the second step, the indenter is held at a constant position and the relaxation response of the material is measured. Then the relaxation response is fit with a multi-exponential function which corresponds to a three-branch general Maxwell model. The relaxation modulus is derived by correcting the finite ramp time introduced in the first step. The proposed model takes into account the sample thickness, which is important for applications in which the sample thickness is less than ten times the indenter radius. The model is validated numerically by finite element simulations. Experiments are carried out on a 10% gelatin phantom and a chicken breast sample with the proposed method. The results for both the gelatin phantom and the chicken breast sample agree with the results obtained from a surface wave method. Both the finite element simulations and experimental results show improved elasticity estimations by incorporating the sample thickness into the model. The measured shear elasticities of the 10% gelatin sample are 6.79 and 6.93 kPa by the proposed finite indentation method at sample thickness of 40 and 20 mm, respectively. The elasticity of the same sample is estimated to be 6.53 kPa by the surface wave method. For the chicken breast sample, the shear elasticity is measured to be 4.51 and 5.17 kPa by the proposed indentation method at sample thickness of 40 and 20 mm, respectively. Its elasticity is measured by the surface wave method to be 4.14 kPa. © 2011 IEEE.