Avaliação termoanalítica da eficiência de antioxidantes na estabilidade oxidativa do biodiesel de mamona

The biodiesel is defined as the mono-alkyl ester derived from long-chain fatty acids, from renewable sources such as vegetable oils or animal fat, whose use is associated with the replacement of fossil fuels in diesel engine cycle. The biodiesel is susceptible to oxidation when exposed to air and this process of oxidation affects the quality of fuel, mainly due to long periods of storage. Because of this, the oxidation stability has been the focus of numerous researches since it directly affects the producers, distributors and users of fuel. One of the possibilities to increase the resistance of biodiesel is the autoxidation treatment with inhibitors of oxidation. The antioxidants can be used as potential inhibitors of the effects of oxidation on the kinematic viscosity and the index of acidity of biodiesel, thereby increasing oxidative stability. This work aims to examine the efficiency of antioxidants, α-tocopherol and butylated hydroxy-toluene (BHT), added the biodiesel content of remembrance through Pressurized-Differential Scanning Calorimetry (P-DSC), Thermogravimetry (TG) and Petrology. The results showed that the use of antioxidant BHT, at the concentration of 2000ppm, increased resistance to oxidation of the biodiesel and oxidative induction time (OIT), which is a better result as antioxidant than the α-tocopherol. With the thermogravimetric analysis, it was observed that the biodiesel presented an initial decomposition temperature of lower tendency than that of oil, demonstrating to be more volatile, bearing great similarity to the diesel and being characterized as an alternative fuel. The rheological analysis indicated that each sample of biodiesel behaved as a Newtonian fluid

Avaliação do comportamento de argila ativada na presença de água destilada, soluções salinas e inibidores de hidratação catiônicos

The clay swelling is today one of the major problems during the well drilling. Nearly 50% of clays that constitute shale expand easily in the presence of water molecules. During the drilling of a geological formation containing swelling clays, when is feasible the use of water base fluids, it is necessary to apply clay inhibitors. This avoids the incorporation of the cutting to the drilling fluid which is responsible for the wall swelling and crumbling. The aim of this work was to evaluate the synergistic behavior that occurs when swelling clay inhibitors are associated to NaCl and KCl salts. Three swelling clay inhibitors samples, INIB A, INIB B and INIB C, were analyzed. Each inhibitor was characterized by the amount of chlorides and active matter content. For the water-clay interaction evaluation in the presence of various fluids, it was used the Capillary Suction Timer (CST, Fann) and Linear Swell Meter (LSM 2000, Fann). For better interpretation of results, a Design of Experiments (DOE, Umetrics MODDE 7.0 TM) through Result Surface Methodology (RSM) was employed, taking into account the type, the swelling inhibitors concentration and the contact time with the clay. The results showed different efficiencies among the inhibitors employed, and the salt-inhibitors mixtures were more efficient than those products alone. However, for field operation, other parameters should be taking into account, as operational cost, environmental requests and time of application for each product

Avaliação da síntese e caracterização de zeólita ZSM-5 ausente de direcionador orgânico estrutural

The catalytic processes play a vital role in the worldwide economy, a business that handles about US$ 13 billion per year because the value of products depends on the catalytic processes, including petroleum products, chemicals, pharmaceuticals, synthetic rubbers and plastics, among others. The zeolite ZSM-5 is used as catalyst for various reactions in the area petrochemical, petroleum refining and fine chemicals, especially the reactions of cracking, isomerization, alkylation, aromatization of olefins, among others. Many researchers have studied the hydrothermal synthesis of zeolite ZSM-5 free template and they obtained satisfactory results, so this study aims to evaluate the hydrothermal synthesis and the physicochemical properties of ZSM-5 with the presence and absence of template compared with commercial ZSM-5. The methods for hydrothermal synthesis of zeolite ZSM-5 are of scientific knowledge, providing the chemical composition required for the formation of zeolitic structure in the presence and absence of template. Samples of both zeolites ZSM-5 in protonic form were obtained by heat treatment and ion exchange, according to procedures reported in the literature. The sample of commercial ZSM-5 was acquired by the company Sentex Industrial Ltda. All samples were characterized by XRD, SEM, FTIR, TG / DTG / DSC, N2 adsorption and desorption and study of acidity by thermo-desorption of probe molecule (n-butylamine), in order to understand their physicochemical properties. The efficiency of the methods applied in this work and reported in the literature has been proved by well-defined structure of ZSM-5. According as the evaluation of physicochemical properties, zeolite ZSM-5 free template becomes promising for application in the refining processes or use as catalytic support, since its synthesis reduces environmental impacts and production costs

Avaliação da poatencialidade da perlita natural e expandida na adsorção de metais

The contamination by metal ions has been occurring for decades through the introduction of liquid effluent not treated, mainly from industrial activities, rivers and lakes, affecting water quality. For that the effluent can be disposed in water bodies, environmental standards require that they be adequately addressed, so that the concentration of metals does not exceed the limits of standard conditions of release in the receptor. Several methods for wastewater treatment have been reported in the literature, but many of them are high cost and low efficiency. The adsorption process has been used as effective for removal of metal ions. This paper presents studies to evaluate the potential of perlite as an adsorbent for removing metals in model solution. Perlite, in its natural form (NP) and expanded (EP), was characterized by X-ray fluorescence, X-ray diffraction, surface area analysis using nitrogen adsorption (BET method), scanning electron microscopy and Fourier transform infrared spectroscopy. The physical characteristic and chemical composition of the material presented were appropriate for the study of adsorption. Adsorption experiments by the method of finite bath for model solutions of metal ions Cr3+, Cu2+, Mn2+ and Ni2+ were carried out in order to study the effect of pH, mass of the adsorbent and the contact time on removal of ions in solution. The results showed that perlite has good adsorption capacity. The NP has higher adsorption capacity (mg g-1) than the EP. According to the values of the constant of Langmuir qm (mg g-1), the maximum capacity of the monolayer was obtained and in terms of proportion of mass, we found the following order experimental adsorption: Cr3+ (2.194 mg g- 1) > Ni2+ (0.585 mg g-1) > Mn2+ (0.515 mg g-1) > Cu2+ (0.513 mg g-1) and Cr3+ (1.934 mg g-1)> Ni2+ (0.514 mg g-1) > Cu2+ (0.421 mg g-1) > Mn2+ (0.364 mg g-1) on the NP and EP, respectively. The experimental data were best fitted the Langmuir model compared to Freundlich for Cu2+, Mn2+ and Ni2+. However, for the Cr3+, both models fit the experimental data

Avaliação da eficiência da técnica de obturação pela compressão hidrùlica vertical após instrumentação automatizada

The purpose of this study was to evaluate through radiographic and microscopic analysis the efficiency of the filling techniques by vertical hidraulic compression after the root canal mechanical instrumentation in vitro as well to evaluate the marginal apical leakage through macroscopic and microscopic analysis. Thirty human mandibular molars were used , they were divided on three groups, these were subdivided on six subgroups with five specimens each, come down to 106 root canals filled. Initially, the teeth were instrumented with Profile system series 29 and filled with two ways: single accessory cone or single cone associated with gutta-percha secundary cone, with Fill Canal sealer or Sealer 26. Completed the filling, the teeth were coated with araldit and finger -nail polish except for the apical 2 mm and dried for 3 hours, thep radiographs were taken of the teeth in orto and disto-radiai directions. Next, the coronal seal was carried out with composite resin photopolymerized and with their process of making impermeable. Teeth of positive controls were used without araldit and finger-nail polish whereas the negative controls were used with total coat of araldit and finger-nail polish. The specimens were placed in 2% Methylene Blue dye for 24 hours and thermocycled for 7 days. Afterwards, sections were made of each tooth at mesial and distal roat, after this the teeth were radiographed at buccolíngual direction for a macroscopic analysis and at buccolingual and mesiodistal directions for assessment of the marginal apical leakage. Cross sections were made 3 mm to 3mm since the tooth apice. The sections obtained for each group were observed with a stereomicroscope to evaluate the quality of the root canal filling and the marginal apical leakage. The results showed that: In the four techniques the marginal dye leakage was present in the apical third; in all groups the quality of the root canal filling in the radiography was better at mesial root canal and the single cone technique showed inefficient when only a single distal root canal was present. In the radiographic evaluation the best quality of the root canal filling was observed in the 1A group (single accessory cone + FiIl Canal), as in the mesial root as in the distal root wich Shcwed twe root canals: when the distaI root had only one canal. the best result was showed by 28 group (single accessory cone associated with secundary cone + Fill Canal) In the macroscopic analysis of longitudinal !eaKage (outside surface). less leakage was showed as In the mesial root as in the distal root in the negative control group (3) followed 2A group (single accessory cone + Sealer 26). When the microscopic analysis of tranversal leakage of both roots (inside surface) was carried out. the groups that showed less dye leakage were the negative control (38) followed the 28 group (single acessory cone associated with secundary cone + Sealer 26). The homogeneity o filling was best noted in the 1 A group (.single accessoty cone + Fill Canal). The groups that showed less dye penetration in the tranversal leakage (total area) were negative control (3B) and 2B

QualiAB: desenvolvimento e validação de uma metodologia de avaliação de serviços de atenção básica

Este artigo apresenta o desenvolvimento, validação e utilização de uma metodologia de avaliação da qualidade dos serviços de atenção primária do Sistema Único de Saúde (SUS), o Questionário de Avaliação da Qualidade de Serviços de Atenção Básica (QualiAB). Destina-se aos serviços de atenção básica, organizados segundo diferentes modelos de atenção, incluindo a Saúde da Família. Contém 50 indicadores sobre oferta e organização do trabalho assistencial e programático e 15 sobre gerenciamento, na forma de questões de múltipla escolha, autorespondidas via web pela equipe local do serviço. Confere a cada resposta valor zero, um ou dois; a média geral atribui ao serviço um grau de qualidade expresso pela distância do melhor padrão correspondente à média dois. Foi construído por processo de consenso interativo, que incluiu metodologias qualitativas, teste-piloto, aplicação em 127 serviços, validação de construto e confiabilidade. Respondido, em 2007, por 598 (92%) dos serviços de 115 municípios paulistas, mostrou bom poder para discriminar níveis de qualidade. Adotado em 2010 como parte de um programa de apoio à Atenção Básica da Secretaria de Estado da Saúde de São Paulo, foi respondido por 95% (2.735) dos serviços de 586 municípios (90,8% do Estado). Os resultados foram encaminhados aos municípios. O QualiAB fornece uma avaliação válida, simples e com a possibilidade de retorno imediato para gerentes e profissionais. Mostrou factibilidade, aceitabilidade, bom poder de discriminação e utilidade para auxiliar a gestão da rede de atenção básica do SUS em São Paulo. A experiência indica aplicabilidade nas redes de atenção básica do Brasil.

Validação de metodologia analítica por cromatografia líquida de alta eficiência para quantificação de bupivacaína (S75-R25) em nanoesferas de poli(lactídeo-co-glicolídeo)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Metodologia para avaliação de impacto ambiental de macrófitas em mesocosmos

Este trabalho teve como objetivo analisar a metodologia para avaliação do impacto ambiental causado pelo uso de herbicidas no controle de macrófitas. O desenho e a construção dos mesocosmos são descritos em detalhes, como também a forma como foram inseridos lâminas para coleta e medida da comunidade perifítica e sedimento para avaliação da comunidade bentônica. O método utilizado foi o de fluxo contínuo, e vários parâmetros de qualidade de água foram medidos, além da determinação de resíduos na coluna d'água e no sedimento. A intenção de se utilizar um método de fluxo contínuo foi buscar uma situação mais próxima da realidade, a fim de que os resultados obtidos possam espelhar com maior exatidão os possíveis riscos provenientes do uso de substâncias químicas no controle das macrófitas. Alguns ajustes devem ser feitos nessa metodologia para melhor caracterização dos efluentes e calibração do sistema.

Avaliação da farinha de mandioca e do fubá de milho como substratos para a obtenção de bebida fermento-destilada

A farinha de mandioca e o fubá de milho foram avaliados como matérias-primas alternativas na obtenção de uma bebida fermento-destilada, visando gerar informações úteis à aplicação industrial. Os substratos foram caracterizados e comparou-se a eficiência da mosturação, o perfil de açúcares no mosto, bem como as curvas de fermentação dos substratos. Os resultados demonstraram que o conteúdo de amido foi de 78,1 % para o fubá de milho e 92,7 % para a farinha de mandioca. Quanto ao rendimento da mosturação foi de 57, 4 % para o milho e 66,4 % para a mandioca, sendo que o perfil de açúcares no mosto demonstrou que 95 % dos açúcares presentes no mosto de mandioca foi glicose e o restante pequenas porcentagens de dextrinas e maltose. Já o perfil do mosto de milho apresentou cerca de 85 % de glicose , 10 % de dextrinas e cerca de 4 % de maltose. Para o processo fermentativo, observou -se que o consumo de açúcares no mosto de mandioca foi mais rápido que no mosto de milho.

Adequação da metodologia do teste de deterioração controlada para sementes de brócolis (Brassica oleracea L. - var. itálica)

A eficiência dos testes de vigor na avaliação da qualidade de sementes, depende da sua padronização para as diferentes espécies. Neste contexto, os objetivos deste trabalho foram elaborar as curvas de absorção de água para determinar o período necessário ao ajuste do teor de água das sementes e aprimorar o teste de deterioração controlada para sementes de brócolis. Foram utilizadas sementes de três variedades: dois lotes de Piracicaba precoce, dois lotes de Flórida e quatro lotes de Ramoso. Os lotes foram caracterizados mediante a determinação do teor de água e germinação; o vigor foi determinado pelos testes de primeira contagem, comprimento de plântula, emergência e índice de velocidade de emergência. Foram determinadas as curvas de absorção de água por 84 horas. Para averiguar a eficiência do teste de deterioração controlada para sementes de brócolis, foi feito o ajuste do conteúdo de água das sementes para: 18, 20, 21, 23 e 24%, sendo estas expostas a 45ºC em banho-maria, por 24 horas. O delineamento utilizado foi o inteiramente casualizado. As médias foram comparadas pelo teste de Tukey a 5% de probabilidade. As curvas de absorção permitiram estimar os períodos de 15, 20, 22, 32 e 48 horas para elevação do teor de água a 18, 20, 21, 23 e 24% respectivamente. O teste de deterioração controlada, para sementes de brócolis, propiciou resultados promissores, tendo sido eficiente na separação de lotes, em todos os teores de água estudados, tanto quanto os testes de emergência de plântula e índice de velocidade de emergência.

Metodologia experimental para avaliação de custos de produção e utilização de biodiesel: estudo de caso de quatro ésteres metílicos e óleo diesel comercial

Considerando que o Brasil detém uma vasta gama de matérias-primas para produção de biodiesel, e também que há a possibilidade de produção em pequena escala, prima-se por estudos de cunho econômico a partir de metodologias de fácil execução. O objetivo do trabalho foi demonstrar uma metodologia e sua aplicação para avaliação dos custos inseridos dentro do processo produtivo e de utilização do biodiesel. A metodologia foi aplicada a biodieseis originários de óleo de soja, girassol, frango e sebo bovino, dos quais se avaliaram economicamente os custos fixos e variáveis para conversão química dos óleos e gorduras em ésteres metílicos, em uma planta de produção experimental. Os custos de produção para cada uma das quatro citadas são distintos em função do valor inicial por litro de cada uma. Também fora avaliado o custo específico e o consumo específico de cada um dos biodieseis, a fim de determinar a diferença em relação ao óleo diesel comercial. No estudo de caso, os resultados mostraram vantagens para o óleo diesel, tanto no custo quanto no consumo. Comparando-se os biodieseis, o de sebo bovino apresentou-se com o menor custo de produção e o menor consumo.

A metodologia de superfície de resposta como ferramenta para a avaliação da produção de alginato e poli-hidroxibutirato pela Azotobacter vinelandii

The response surface methodology as a tool for assessing the production of alginate and polyhydroxybutirate by Azotobacter vinelandii. Alginate is a polysaccharide extracted from cell walls of brown algae and used in the food, pharmaceuticals and biotech industries. Production is concentrated on the cultivation of brown seaweed, but several bacteria of the genus Pseudomonas and Azotobacter produce alginate. The chemical structure of alginates produced by algae is similar to those synthesized by A. vinelandii. The bacteria also produce intracellular polymers such as polyhydroxybutyrate (PHB), known as bioplastic. This work studied the simultaneous alginate and PHB production by A. vinelandii using sucrose and different parameters of fermentation in an orbital shaker. The optimal values for the production of these compounds were determined by the MSR. The first experiment was a 2(6-2) factorial design. The second was based on significant variables of the first, resulting in a full 3(3-0) factorial design. From the first to the second, an increase was observed in the PHB productivity from 12 to 45 mg g(-1) cell h(-1) and alginate from 100 to 1,600 mg g(-1) of cell h(-1). The productivity of both compounds was in the maximum incubation temperature of 62 degrees C, in the shortest time of incubation (18h) and the sucrose concentration, 11 g L(-1). In both experiments the PHB extracted presented purity of 94%.

Avaliação da eficiência dos métodos Direto, COPROTEST e Rugai no diagnóstico da estrongiloidíase

Strongyloidiasis, a relatively common parasitism in tropical and sub-tropical areas, is the result of the infection by the smaller nematode, the Strongyloides stercoralis. Humans can be infected by this parasite, which has in its vital cycle free-life forms of male and female individuals able to live in the ground, and with another step necessary parasitism in the intestinal wall. The diagnostic of the infection is routinely done by the microscopic observation of the larva in stool samples and the high sensibility of urn method over another one allows an trustable and efficient diagnostic. The efficiency of three methods (Direct, COPROTEST and Rugai) used in the Parasitology Sector of the NAC-LACAL in Araraquara (SP) to diagnosis the strongiloidiasis were evaluated. A number of 2346 samples of stool of patients from NAC-LACAL and Nestor Goulart Reis Hospital were analyzed in the period between August and December of 2002. The Rugai Method with an positivity index of 65 % was elected as the most efficient of thee ones.

Avaliação de eficiência relativa para a reatividade em silicatos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação de uma metodologia de baixo custo para o cadastro de propriedades em áreas de expansão e vazios urbanos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)